CFLY DF805 User manual

Google Play APP Store
V1.0
DF805 Quick Start Guide
Important
○ For your safety and to avoid loss of property, please read this manual carefully.
○ Please do not disassemble, modify or repair the aircraft. if necessary, please contact agent.
○ This manual is concise. For more details, please go to the "Help" in the upper right corner of the APP main
interface to download the electronic documents.
○ This instruction is updated without prior notice.
DF805 20190518

(1) Insert the CW propeller into the shaft A (motor with
concave points on the shaft end).
(2) Screw the white xing nut of the propeller into the
motor shaft, and rotate the nut counterclockwise.
(3) Screw the nut manually with your hand as
shown in the picture.
The arm A is equipped with the CW propeller and
a white blade xing nut, rotate counterclockwise
to lock the nut,rotate clockwise to unlock the nut.
The arm B is equipped with the CCW propeller and
a white blade xing nut, rotate clockwise to lock the
nut,rotate counterclockwise to unlock the nut.
The arm B is equipped with the CCW
propeller and a white blade fixing nut,
rotate clockwise to lock the nut,rotate
counterclockwise to unlock the nut.
The arm A is equipped with the CW
propeller and a white blade fixing nut,
rotate counterclockwise to lock the
nut,rotate clockwise to unlock the nut.
(1) Insert the CCW propeller into the shaft B (motor with
concave points on the shaft end).
(2)Screw the black xing nut of the propeller into the
motor shaft, and rotate the nut counterclockwise.
(3) Screw the nut manually with your hand as
shown in the picture.
DF805
1
1. Propeller Installation
1). Install Propeller on Arm A
2). Install Propeller on Arm B
3). Examples of Installation

lm
k
a a
c
g
h
j
b
d
f
i
e
2
DF805
2. Remote Control
1). Console
aAntenna bFlight mode switch cOne key return dMode indicator light
eStatus indicator light fLeft joystick gRight joystick hPower
iOne key takeoff/ landing jPicture/video kMobile phone holder lUSB charging interface
mGimbal adjustment
2). About optical ow positioning system
Placed on the bottom of the aircraft, the optical ow positioning system senses the movements of the aircraft with the assistance
of the camera, and calculates the current altitude, helping to precisely locate the aircraft’s position.
When the aircraft is ready to take off, the optical ow positioning function cannot be activated due to the low altitude with the
aircraft’s front indicator light blinking slowly. After the aircraft has taken off and the conditions are satised, the optical ow
positioning function will automatically turn on and locate the aircraft’s position as to enable hovering with the aircraft’s
indicator light turning solid red.
Attention: In mid-ight, the optical ow positioning function cannot be activated if the aircraft’s front indicator light turns slow
blinking red. Please pay proper attention for a safe ight.
The optical ow positioning system is signicantly affected by the intensity of the light and the surface texture of the physical
object. If the optical ow positioning system fails to work, its function of horizontal centered absolute positioning will be ineffective.

(1) Install the mobile phone holder into the slot of the back of
the remote controller. (2) Pull up the phone holder.
(3) Mount the phone to the phone holder. (4) Adjust the phone to make it perfectly t with the holder.
DF805
3
3). Power on
(1). Put the aircraft on a at surface
(2). Power on the aircraft
Long press the power button for 2 seconds.
(3). Power on the remote controller
Long press the power button for 2 seconds to turn
on the remote controller.
(4). Self-inspection and pairing
Power on the aircraft and put it still for at least 30
seconds as for self-inspection. The aircraft’s
indicator light turns from blinking blue or solid to
blinking green or solid, thus the pairing between
the aircraft and the remote controller has been
successful.
4). Mount the phone to the phone holder

4
DF805
5). Connect with APP
(1). Indications of GPS signal state when connecting with APP
The aircraft's indicator light turns solid green when the aircraft connects wit the APP, which indicates strong GPS signal and
successful positioning. Switch the ight mode to position hold mode and then let it take off.
That the aircraft's indicator light turns blinking green indicates weak or no GPS signal. Switch the ight mode to altitude
mode (complicated operations, suitable for experienced pilot).
Note: It is highly recommended to fly under good GPS signal (Green light always on)!
Please choose wide and open flight environment. Tall steel buildings and metal materials will interfere
the signal of the compass and the GPS.
(2). Connect with APP
Open your mobile phone, navigate to settings and then the WLAN:
When ying with the APP, click the network of "Drone-xxxxxx (serial
number)" to connect the drone to the APP. In this situation, the
drone has a relatively shorter range.
When flying with the controller, click the network of "Controller-
xxxxxx (serial number)" to connect the drone to the remote
controller. In this situation, the drone has a relatively longer range.
Open the APP to enter the interface as shown in the left picture.
Click "Start Flying" to enter the operation interface as below.
Note: The aircraft can only connect to 5G Wi-Fi enabled mobile phone.
Use the APP to monitor the shooting footages and the flight condition in mid-flight. It is able to use both
of the remote controller and the APP to control the aircraft. However, some functions are not support
on the APP when the controller being used except these functions, including taking photos or videos,
follow me mode, point of interest mode or waypoint flying mode.
6). Operate the aircraft
(1). Takeoff
○Method 1: takeoff manually
When the aircraft's light turns from blue to green, toggle the left
and right joysticks towards toe-out for at least 3 seconds to get the
propellers started to rotate.
Slowly toggle the throttle joystick upward to control the aircraft to
take off quickly, and then toggle the throttle joystick to let it ascend
gradually.
○Method 2: one key takeoff
Long press the "One Key Takeoff/ Landing" button for 2 to 3 seconds. When the remote controller beeps B-B-B, the
aircraft will automatically take off and ascend to hover at the altitude of 1.2 meters.

Left Joystick Upward
Downward
Left Rotation Right Rotation
Right Joystick Forward
Backward
RightLeft
Upward
Downward
Right Joystick
RightLeft
Left Joystick
Left Rotation Right Rotation
Forward
Backward
DF805
5
(2). Landing
Please be aware of the crowds or obstacles and ensure the aircraft is hovering over the landing site before landing. Choose
an open and at space as your landing site.
○Method 1: land manually
Slowly toggle the throttle joystick downward to control the aircraft to land slowly. When it lands, continue to toggle the
throttle joystick to the lowest position until the propellers stop rotation.
○Method 2: one key landing
Long press the "One Key Takeoff/ Landing" button for 2 to 3 seconds. When the remote controller beeps B-B-B, the
aircraft will land vertically and stop running.
(3). Remote controller instruction
○Mode 2
○Mode 1
(4). Switch mode 2 to mode 1
○switch to mode 2
Toggle the left joystick to the lowest position and press the "One Key Takeoff/ Landing" button at the same time before
turning on the remote controller. Then release the left joystick and the button as to enter mode 2.
○switch to mode 1
Toggle the right joystick to the lowest position and press the "Photo/ video" button at the same time before turning on the
remote controller. Then release the right joystick and the button as to enter mode 1.
7). Photo and video
During the ight, you can use the "Photo / Video" button to take photos or video footages.
Short press the "Photo/ Video" button and wait until the remote controller beeps, indicating that you have successfully taken a

Video
Picture
File
Short press for taking
picture,long press 2-3s for
recording video,during recording
video,short press also can take
pictures!
6
DF805
photo.
Long press the "Photo/Video" button and wait until the remote controller beeps steadily, with the APP icon changing from white
to red, indicating it has been ready for video shooting. Long press the button again and wait until the remote controller beeps
steadily, with the APP icon changing from red to white, indicating it has stopped recording.
○Aerial photography tips
(1). Check the condition of all parts before ight.
(2). Take photos or videos when the drone is in position hold mode.
(3). Shoot on sunny and breezy days.
(4). Slightly toggle the joystick in midnight as to ensure a smooth ight.
Note: As to avoid possible damage or loss, please ensure that the camera is free to rotate. High temperature
may cause damage to the camera and even cause injury.
8). Flight mode
(1). Position hold mode
○How to enter position hold mode
a. Default ight mode is GPS mode;
b. When the drone is in altitude hold mode and the GPS positioning system is working well, long press the button on the
remote controller to switch to position hold mode.
○Indicator light status of the aircraft and the remote controller
The left indicator light on the controller turns solid green.
○Notice
In position hold mode, the aircraft will automatically position its own location and hover steadily. Please choose an open and
wide outdoor eld before ight, and wait until the GPS has been turned on before ying it.
(2). Altitude hold mode
○How to enter altitude hold mode
When aircraft is in position hold mode, long press mode switch button to switch to altitude hold mode.
○Indicator light status of the aircraft and the remote controller
The left indicator light on the controller turns solid red.
○Notice
The aircraft in altitude hold mode requires pilots with experienced operation skills. However, certain environmental factors,
such as airow, might affect the ight, resulting in drifting or hovering failure.
Please familiarize with the position hold mode and learn how to handle it before using altitude hold.
9). Return To Home
Note: As for the return to home point as precise as possible, please fly the aircraft in open flat terrain (no tall

Forward
Left Right
Forward/Backward
Backward
DF805
7
buildings in 50 meters of radius, flat terrain in 10 meters of radius) with the GPS working well. Thus the
return to home function will be able to activate.
In GPS positioning mode, you can press the "One Key Return" button to return the aircraft. Do not control any functions during
the process of return or ascent. When the aircraft is landing, you can toggle the joystick as to control it to land on your desired
location. When the aircraft is returning to home point, long press the "Return" button to exit auto return mode.
Note: As for the return to home point as precise as possible, please ensure the GPS positioning function has
been turned on to record the aircraft’s position before its takeoff and choose an area with no obstacles.
With the GPS positioning mode turned on, it will automatically enter auto return to home mode:
1) if the remote controller loses control;
2) if the aircraft battery is low.
Once the auto return to home mode is enabled, if the aircraft flies below 30 meters of altitude, the aircraft
will automatically ascend to 30 meters before returning to home point. However, if the aircraft flies over 30
meters of altitude, the aircraft will return to home point at the current altitude. Please do not control other
functions during the process of return. Please ensure there are no obstacles in way of return in case of any
potential accidents.
After the aircraft lands and the propellers stop rotating, long press the power switch to turn off the aircraft and the remote
controller.
Caution: Please stay away from aircraft until propellers stop rotating completely.
10). Remove the battery and store it separately
(1). When nishing ight, please remove the batteries from the aircraft and remote controller and store them separately.
(2). Keep batteries out of the reach of children. Keep the battery dry. DO NOT leave the battery near heat sources such as a
furnace or heater. The ideal storage temperature is 22℃-28℃.
(3). If a battery is found to be damaged, please discharge the battery and dispose them properly according to the local regulations
and laws.