Chamberlain MyQ User manual

LiftMaster® Quick Install Guide
7Conrm
Connection
to Gateway
1
3
4
Disconnect Power to the Garage Door
Reconnect Power to the Garage Door Opener
Connect the LiftMaster Internet Gateway
powered by
6Follow Website
Instructions to
Learn-in the
Garage Door Opener
2Install MyQ®Control Panel
Complete installation guide can be found at:
Alarm.com Dealer Site > Support & Sales >
Support Documents > Garage > LiftMaster MyQ Devices.
5Visit Alarm.com
Customer Site or
Dealer Site
Enable LiftMaster Garage Door Control
add-on for the customer.
Register the Internet Gateway using the
serial number on the back of the unit.
Press the learn button two times.
Yellow light will be replaced by a blue light
to conrm that the opener is connected.Green Light indicates the gateway is plugged-in and connected to the Internet.

Opener Opener Opener
Quick ID Quick ID Quick ID
Equipment Needed Equipment Needed Equipment Needed
Liftmaster® Compatible
Opener Made After 1998
LiftMaster, Chamberlain, Sears/Craftsman,
Raynor and AccessMaster opener
Look for a purple learn button
with purple antenna wire, or an orange/red
learn button with gray antenna wire*
LiftMaster MyQ Internet Gateway 828LM
MyQ Control Panel 888LM
Incompatible Opener
1) Other brand
2) Missing Safety Eyes
3) LiftMaster, Chamberlain or Craftsman
brand made before 1998
Contact LiftMaster dealer to replace operator.
dealerlocator.liftmaster.com
MyQ Enabled Opener
MyQ or AssureLink logo is on the opener
(LiftMaster or Craftsman)
LiftMaster MyQ Internet Gateway 828LM
(control panel is not needed)
MyQ® Upgrade Chart
* Models 2500 and 2500C are not compatible. Manufacturer date
is also shown on the operator along with the serial number.
powered by Copyright © 2013 Alarm.com. The Chamberlain Group, Inc.. All rights reserved.