Charder MS 6111 User manual

23
Manufacturer’s Declaration of Conformity
This product has been manufactured in accordance with the
harmonized European standards, following the provisions of the
below stated directives:
93/42/EEC as amended by 2007/47/EC
Medical Device Directive
Please see separate document showing on sticker of device for
above CE marking.
Authorized EU Representative:
Manufactured by:
Charder Electronic Co., Ltd.
No.103, Guozhong Rd., Dali Dist.,
Taichung City 412, Taiwan (R.O.C.)
FDA no.: D051882
IN-1199 [11172H] 06/2016
0
MS 6111
USER MANUAL
Please keep the instruction manual at hand all the time for future reference.

1
TABLE OF CONTENTS
TABLE OF CONTENTS .......................................................................... 1
PREFACE................................................................................................. 2
GENERAL INFORMATION .................................................................... 2
SAFETY INSTRUCTION ........................................................................ 2
ENVIROMENTAL ................................................................................... 3
CLEANING.............................................................................................. 3
MAINTENANCE ..................................................................................... 3
WEIGHING OPERATION ....................................................................... 4
WARRANTY-LIABILITY........................................................................ 4
DISPOSING OF THE SCALE.................................................................. 5
EXPLANATION OF THE GRAPHIC SYMBOLS.................................... 5
EMC guidance and manufacturer's declaration.......................................... 7
SPECIFICATIONS ................................................................................. 12
POWER ADAPTOR STANDARDS ....................................................... 13
POWER SUPPLY & LOW BATTERY.................................................... 14
PANELAND LCD DISPLAY................................................................. 15
LCD DISPLAY....................................................................................... 15
KEY FUNCTION DESCRIPTION:........................................................ 15
INSTRUCTION OF HOLD FUNCTION................................................ 16
INSTRUCTION OF USING BMI FUNCTION....................................... 17
POWER SUPPLY................................................................................... 18
INSTALLING THE BATTERY .............................................................. 18
ERROR MESSAGE................................................................................ 19
TROUBLESHOOTING.......................................................................... 20
22
Main power adaptor faulty – Parts Replacement
2. LCD display faulty
Possible hardware defects include: Uneven brightness in the LCD
display screen texts color blurred, smeared rainbow screen,
incorrect decimal display
LCD PIN broken or short circuit
PCB cooper foil broken loosed welding
Unable to save or read data – IC or transistor faulty, internal parts
broken.
LCD showing “ERRL” after switch on - Load cell damaged
Overload may cause the weigh to malfunction.
Software system crash
Resonator faulty
Load cells with faulty grinding standard.
Key buttons failure - Front key panel damaged or disconnected
3. Buzzer malfunction
Wrong welding of PVC wire
Key buttons control panel damaged or disconnected.

21
properly
Check if the battery power is running low - Replace with new
batteries
2. Indicator showing “0000 ZERO SPAN out of range


 Incorrect weighing result - Avoid damages by external
environment force such as free-drop to the ground, collision by
external objects, etc.


 Proper re-calibration procedure required to correct the setting
of weighing accuracy.


 Interference due to RF disturbance, ground vibration…etc.


 Unstable platform feet adjustments according to bubble level
indication


 Incorrect position or other external objects within weighing
area


 The weighing-scale is not put in a solid firm ground area, such
as carpet floor or lawn.
3. Connection failure for data transmission to PC or printer
Wrong connection wires or faulty wires for transmission between
the digital indicator load cells.
Wrong indicator models
Wrong internal wiring or wire broken
In case of the following defective mode occurs, it is suggested to contact
your nearest Authorized Dealer for further technician service & repair:
1. POWER switch-on failure :
Push-button faulty
Short circuit wires - Wire broken
Safety fuse burnt out
Wire connection problem
2
PREFACE
Thank you for choosing CHARDER MEDICAL product. All features of this
product were designed to state of the art and are optimized for simple and
straightforward use. If you have any queries or experience any problems
not addressed in the operating instructions, please contact your
CHARDER MEDICAL service partner, or visit us on the Internet at
www.chardermedical.com
GENERAL INFORMATION
We strongly recommend you use the scales on flat and hard surface. Any
soft surface, like carpet will cause inaccuracy.
SAFETY INSTRUCTION
Before putting the device into use, please read with care the
information given in the Operating Instructions. They contain
important instructions for installation, proper use and maintenance of the
device.
The manufacturer shall not be liable for damages arising out of failure to
heed the following instructions:
Don’t leave the baby unattended on scale.
When using electrical components under increased safety requirements,
always comply with the appropriate regulations.
Improper installation will render the warranty null and void.
Ensure the voltage marked on the power supply unit matches your mains
power supply.
This device is designed for use indoors.
Observe the permissible ambient temperatures for use
The device meets the requirements for electromagnetic compatibility. Do
not exceed the maximum values specified in the applicable standards.

3
These batteries should be kept away from all children. If swallowed,
promptly seek medical assistance.
Expected Service Life: 5 years
If you have any problem, contact your local CHARDER MEDICAL service
partner.
ENVIROMENTAL
All batteries contain toxic compounds; disposal of batteries should be
delegated to a competent organization, complying with the deposit of
Poisonous Waste Regulation 1972.
Please do not incinerate batteries.
The optimum operating temperature for the scale is 5℃to +35℃; although
it will operate at higher and lower temperatures the scales battery life will be
adversely effected.
CLEANING
We would recommend using alcohol based wipes or similar when cleaning
the scales.
Please do not use large amounts of water when cleaning the scales as this
will cause damage to the scales electronics, you should also refrain from
using corrosive liquids or high pressure washers.
Always disconnect the scales from the mains power supply before cleaning.
MAINTENANCE
The scale does not require any routine maintenance. However, we
recommend checking the scale’s accuracy at regular intervals. The
regularity of these checks is dependent on the level of use and the state of
the scale. If any inaccuracies occur, please contact your local dealer or
CHARDER MEDICAL service partner
20
TROUBLESHOOTING
Troubleshooting for defective modes:
Original purchaser can enjoy the benefits under the effective Warranty
against functional defects in material and workmanship subject to the
terms and conditions listed in the yearly Warranty Program Return
Policy.
Our warranty service program includes the following:
1. Technician repair service under warranty or at a service
maintenance charge depending on the workmanship for the
defective functionality or cause of damage covered by the
warranty.
2. Parts replacement from the manufacturing factory under the
warranty or at a certain cost for the replaced parts plus the
workmanship charge if not covered under the warranty.
Before you contact our Authorized Dealer in your country for technician
repair service, please read through the following section carefully:
Self-checking Tips:
Some functional defects can be identified and maintained by
users as listed below:
1. Power-on failure
Check if the main power adaptor has not plugged onto the scale

19
ERROR MESSAGE
4
WEIGHING OPERATION
Before reading detailed instructions on how to use all the weighing
functions that are built into your scale, please read the following important
guidelines:
Always be sure that the display shows `Zero` before use, if it does not then
please press the ZERO key.
The Professional Medical scale is designed to detect when a stable weight
is achieved, the indicator will `bleep` twice to indicate a stable weight value,
your reading should be taken at this point.
WARRANTY-LIABILITY
If a fault or defect is present on receipt of the unit which is within CHARDER
MEDICAL’s scope of responsibility, CHARDER shall have the right to either
repair the fault or supply a replacement unit. Replaced parts shall be the
property of CHARDER. Should the fault repairs or replacement delivery not
be successful, the statutory provisions shall be valid. The period of warranty
shall be two years, beginning on the date of purchase. Please retain your
receipt as proof of purchase. Should your scale require servicing, please
contact your dealer or CHARDER MEDICALCustomer Service.
No responsibility shall be accepted for damage caused through any of the
following reasons: Unsuitable or improper storage or use, incorrect
installation or commissioning by the owner or third parties, natural wear,
changes or modifications, incorrect or negligent handling , overuse,
chemical, electrochemical or electrical interference or humidity, unless this
is attributable to negligence on the part of CHARDER MEDICAL.
If operating, climatic or any other influences lead to a major change in
conditions or material quality, the treaty for perfect unit functioning shall be
rendered null and void. If CHARDER provides and individual warranty, this

5
means that the unit supplied will be free of faults for the length of the
warranty period.
DISPOSING OF THE SCALE
This product is not to be treated as regular household waste, but should be
handed in to an electrical/electronic equipment recycling centre.
You can obtain further details from your local council, your municipal waste
disposal company or the firm which you purchased the product
EXPLANATION OF THE GRAPHIC SYMBOLS
SN-T13000001
Designation of the serial number of
every device, applied at the device.
(Number as an example)
“Please note the accompanying
documents“
or “Observe operating instructions”
Charder Electronic Co., Ltd.
No.103, Guozhong Rd., Dali Dist.,
Taichung City 412, Taiwan (R.O.C.)
Identification of manufacturer of
medical product including address
18
6. The scale will take the weight of person and calculate BMI value
according to height set up during process.
7. LCD will display BMI, weight and height in rotation.
8. Press to disable BMI function and return to normal mode
or press to shut down the scale.
POWER SUPPLY
MS 6111 uses 4 xAA size alkaline batteries (not included) for
operation. If you want scale to be operated by battery, please install
batteries by referring to instruction below.
INSTALLING THE BATTERY
You can also use the adaptor (standard) as power supply.
Installing 4 AA1.5V batteries
unit switch
adaptor plug

17
INSTRUCTION OF USING BMI FUNCTION
Body Mass Index Categories
Classification of weight for adults over 18 years on the basis of Body
Mass Index according to WHO, 2000 EK IV and WHO 2004 (WHO -
World Health Organization).
INSTRUCTION OF HOW TO USE BMI FUCNTION
1. Switch on the scale and have the person who’s going to be
measured standing on the platform.
2. Long press HOLD/BMI key three seconds to enable BMI
mode.
3. The LCD display will show last input height and flashing.
4. Press and key to increase and decrease the height.
5. After the height is set up, press button that has an arrow
mark beside to confirm the height value.
6
“Electro-medical appliance“
with attachment for type B
Dispose of old appliances
separately from your household
waste!l!
Instead, take them to communal
collection points.
Carefully read this operation manual
before setup and commissioning,
even if you are already familiar with
Charder scales.
Transport and storage temperature
limit indicating the upper and the
lower limit
(Transport and storage temperature
on packaging)
+60°C
-20°C

7
EMC guidance and manufacturer's declaration
Guidance and manufacturer’s declaration-electromagnetic emissions
The MEDICAL SCALE MS6111 is intended for use in the electromagnetic
environment specified below.
The customer or the user of the MEDICAL SCALE MS6111 should assure
that it is used in such an environment.
Emission test Compliance Electromagnetic
environment-guidance
RF emissions
CISPR 11
Group 1 The MEDICAL SCALE
MS6111 uses RF energy only
for its internal function.
Therefore, its RF emissions
are very low and are not likely
to cause any interference in
nearby electronic equipment.
RF emissions
CISPR 11
Class B
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fluctuations
/flicker emissions
IEC 61000-3-3
Compliance
The MEDICAL SCALE
MS6111 is suitable for use in
all establishments, including
domestic establishments and
those directly connected to the
public low-voltage power
supply network that supplies
buildings used for domestic
purposes.
Guidance and manufacturer’s declaration-electromagnetic immunity
The MEDICAL SCALE MS6111 is intended for use in the electromagnetic
environment specified below.
The customer or the user of the MEDICAL SCALE MS6111 should assure that
it is used in such an environment.
Immunity test IEC 60601
test level Compliance level Electromagnetic environment-guidance
16
3. TARE:
Press to tare weight.
4. HOLD/BMI:
Press this key to lock the weight value before or while weighing
& To disable the weight lock (Hold) function, press HOLD key
again or remove the weight (Tare weight also) from the
platform; display will come to zero weighing
INSTRUCTION OF HOLD FUNCTION
1. Press HOLD key to enter into weighing lock mode.
2. The arrow pointing to hold mark will start to flicker and LCD will
display “ ”.
3. To have person stand on the scale; the scale will take the
average of fluctuating weight and lock the weight on the display.
4. After the weight value is locked, press HOLD key again or pick
up the weight (Tare weight also) from the platform to disable the
hold function. (The arrow of hold and locked value will
disappear and the instrument returns to normal mode.)
NOTE:
A. When the weighing lock (Hold) function is activated, all other
keys and functions can not operate.
B. After a weight value is locked, and weight still on the scale.
Press HOLD key to disable the hold function, or press TARE
key to disable the hold function and perform tare function.
C. Before a weight value is locked, press TARE key will only
perform tare function, but the hold function is not disabling.

15
PANEL AND LCD DISPLAY
LCD DISPLAY
1. : Stable symbol
2. : Minor weight value
3. : Zero
KEY FUNCTION DESCRIPTION:
1. : This ON/OFF button with an red arrow sign to the
side is a functional setting confirmation button when BMI mode
is enabled (Refer to section under INSTRUCTION OF HOW TO
USE BMI FUNCTION in Page 18 ). After the height value is
entered, press this ON/OFF button with the red arrow sign to
confirm the height value and perform BMI value function.
2. The other opposite direction ON/OFF button is the power
on & off key under any mode setting to switch off the scale.
8
Electrostatic
discharge(ESD)
IEC 61000-4-2
± 6 kV contact
± 8 kV air
± 6 kV contact
± 8 kV air
Floors should be wood,
concrete or ceramic tile.
If floors are covered
with synthetic material,
the relative humidity
should be at least 30%
Electrical fast
transient/burst
IEC 61000-4-4
± 2kV for
power supply
lines + 1kV for
input/output
lines
± 2kV for
power supply
lines Not
applicable
Mains power quality
should be that of a
typical commercial or
hospital environment.
Surge IEC
61000-4-5
± 1kV line(s)
to line(s) ±
2kV line(s) to
earth
± 1kV
differential
mode Not
applicable
Mains power quality
should be that of a
typical commercial or
hospital environment.
Voltage Dips,
short
interruptions
and voltage
variations on
power supply
input lines IEC
61000-4-11
<5% UT(>95%
dip in UT) for
0,5 cycle 40%
UT(60% dip in
UT) for 5
cycles 70%
UT(30% dip in
UT) for 25
cycles <5%
UT(>95% dip
in UT) for 5 s
<5% UT(>95%
dip in UT) for
0,5 cycle 40%
UT(60% dip in
UT) for 5
cycles 70%
UT(30% dip in
UT) for 25
cycles <5%
UT(>95% dip
in UT) for 5 s
Mains power quality
should be that of a
typical commercial or
hospital environment. If
the user of the
MEDICAL SCALE
MS6111 requires
continued operation
during power mains
interruptions, it is
recommended that the
MEDICAL SCALE
MS6111 be powered
from an uninterruptible
power supply or a
battery.
Power
frequency(50/60
Hz) magnetic
field IEC
61000-4-8
3 A/m 3 A/m The MEDICAL SCALE
MS6111 power
frequency magnetic
fields should be at
levels characteristic of a
typical location in a
typical commercial or
hospital environment.
NOTE UT is the a.c. mains voltage prior to application of the test level.

9
Guidance and manufacturer’s declaration-electromagnetic immunity
The MEDICAL SCALE MS6111 is intended for use in the electromagnetic
environment specified below.
The customer or the user of the MEDICAL SCALE MS6111 should assure that is
used in such and environment.
Immunity test IEC 60601 test
level Compliance level Electromagnetic environment-guidance
Conducted RF
IEC 61000-4-6
Radiated RF
IEC 61000-4-3
3 Vrms
150 KHz to 80
MHz
3 V/m 80MHz to
2,5 GHz
3 Vrms
3 V/m
Portable and mobile RF
communications equipment
should be used no closer to any
part of the MEDICAL
SCALE MS6111 including
cables, than the recommended
separation distance calculated
from the equation applicable to
the frequency of the transmitter.
Recommended separation
distance:
d = 1,2 √P
d = 1,2 √P 80MHz to 800
MHz
d = 2,3 √P 800MHz to 2,5
GHz
Where P is the maximum output
power rating of the transmitter in
watts (W) according to the
transmitter manufacturer and d is
the recommended separation
distance in metres (m).
Field strengths from fixed RF
transmitters, as determined by
an electromagnetic site survey
a
,
should be less than the
compliance level in each
frequency range
b
.
Interference may occur in the
vicinity of equipment marked
14
POWER SUPPLY & LOW BATTERY
1. The MS 6111 scale uses 4 xAAsize alkaline batteries.
2. Low battery indication will display on LCD display when battery
power is insufficient to perform the weighing.
3. When “ ” is displayed, please change batteries.
Please refer to “INSTALLING THE BATTERY” .

13
POWER ADAPTOR STANDARDS
AMP
VOLTAGE
DRAWING NO.: CE APPROVED TYPE NO.
/ MODEL NO.:
TYPE
9V DC 100mA
AD-038A REV 007 D41W1090100-13/1 EU
9V DC 100mA
AD-0484 REV 001 D35W090100-23/1 US
9V DC 100mA
AD-0484 REV 001 SP35-90100 US
9V DC 100mA
AD-037A REV 003 D41WK090100-13/2 UK
9V 200mA AD-8082A REV 001 UE05WCP-0900205PC AU
12V 2A AD-8057 REV 001
(AD-0520)
UE24WV-120200SPA EU
12V 2A AD-8058 REV 001 UE24WU-120200SPA US
12V 2A AD-8056 REV 001 UE24WB-120200SPA UK
12V 2A AD-8074 REV 001 UE24W4-120200SPAS AU
12V 1A N/A UE24WV-120100SPA EU
12V 1A N/A UE24WV-120100SPA UK
15V300mA AD-8079A UE05WCP-150030SPC EU
15V300mA AD-016D REV 001 D41W150300-13/1 US
15V300mA AD-8064 REV 001 MTP121UL-120100A US
15V300mA AD-8079B REV 001 UE05WCP-150030SPC UK
15V300mA AD-8079C REV 001 UE05WCP-150030SPC AU
15V 300mA AD-0420 REV 004 D41WI150300-13/1 EU
15V 300mA AD-0370 REV003 D41WK150300-13/2 UK
15V 300mA AD-0482 REV 004 D41WA150300-13/2 AU
10
with the following symbol:
NOTE1 At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE2 These guidelines may not apply in all situations. Electromagnetic
propagation is affected by absorption and reflection from structures, objects and
people.
a Field strengths from fixed transmitters, such as base stations for radio
(cellular/cordless) telephones and land mobile radios, amateur radio, AM
and FM radio broadcast and TV broadcast cannot be predicted theoretically
with accuracy. To assess the electromagnetic environment due to fixed RF
transmitters, an electromagnetic site survey should be considered. If the
measured field strength in the location in which the MEDICAL SCALE
MS6111 is used exceeds the applicable RF compliance level above, the
MEDICAL SCALE MS6111 should be observed to verify normal operation. If
abnormal performance is observed, additional measures my be necessary,
such as re-orienting or relocating the MEDICAL SCALE MS6111.
b Over the frequency range 150 kHz to 80 MHz, field strengths should be les
than 3 V/m.
Recommended separation distance between portable and mobile RF
communications equipment and the MEDICAL SCALE
The MEDICAL SCALE MS6111 is intended for use in an electromagnetic
environment in which radiated RF disturbances are controlled. The customer or
the user of the MEDICAL SCALE MS6111 can help prevent electromagnetic
interference by maintaining a minimum distance between portable and mobile
RF communications equipment (transmitters) and the MEDICAL SCALE
MS6111 as recommended below, according to the maximum output power of
the communications equipment.
Separation distance according to frequency of transmitter m
Rated maximum output
power of transmitter
W
150 kHz to 80 MHz
d =1,2√P
80 MHz to 800 MHz
d =1,2√P
800 MHz to 2,5 GHz
d =2,3√P

11
0,01 0,12 0,12 0,23
0,1 0,38 0,38 0,73
1 1,2 1,2 2,3
10 3,8 3,8 7,3
100 12 12 23
For transmitters rated at a maximum output power not listed above, the
recommended separation distance d in metres (m) can be estimated using the
equation applicable to the frequency of the transmitter, where p is the maximum
output power rating of the transmitter in watts (W) according to the transmitter
manufacturer.
NOTE1 At 80 MHz and 800 MHz, the separation distance for the higher
frequency range applies.
NOTE2 These guidelines may not apply in all situations. Electromagnetic
propagation is affected by absorption and reflection from structures, objects
and people.
12
SPECIFICATIONS
MODEL# MS 6111
Capacity
Division 0~20kg x 0.01kg 20~250kg x 0.1kg 0~44lb x 0.02lb 44~550lb x 0.2lb
Accuracy 0~20kg ±20g
20~250kg ±200g 0~44lb ±0.04lb 44~550lb ±0.4lb
Units of Measure kg ; lb(switch is at bottom of scale)
Function keys ON/OFF, TARE, HOLD/BMI
Stabilization Time 1-2 seconds
Operating Temp.
and humidity 5°C - 35°C 15%-85% RH
Transport and
storage
temperature and
humidity
-20°C … +60°C
10%-95% RH
Four 1.5V AA size alkaline batteries
Power supply Adaptor type: 9V ~ 12V
Indicator display 1.0” LCD display with 5 active digits
Dimensions 348.5 x 355mm