ADE LW100 Series User manual

OPERATING MANUAL
Electronic, price-computing retail scales
Calibrate retail scale -
LW100 series
LW100-210408-Rev002-UM-en
LW100 series

2 LW100-210408-Rev002-UM-en
1. Table of Contents
1. Table of Contents .................................................................................................................................................... 2
2. About this operating manual .............................................................................................................................. 3
General information ................................................................................................................................ 3
Storage ..................................................................................................................................................... 3
Target group ............................................................................................................................................ 3
3. Safety instructions ................................................................................................................................................... 3
4. Inten e use .............................................................................................................................................................. 4
5. Scope of elivery ..................................................................................................................................................... 5
6. Start-Up the scale ................................................................................................................................................... 5
7. Operating an isplay elements ...................................................................................................................... 6
Overview .................................................................................................................................................. 6
Operating controls .................................................................................................................................. 7
Button terms an functions ................................................................................................................... 7
Menu gui ance keys .............................................................................................................................. 8
Display ..................................................................................................................................................... 8
Battery status in icator .......................................................................................................................... 9
8. Using the scale ......................................................................................................................................................... 9
Preliminary Note ..................................................................................................................................... 9
Switching the scale on an off .............................................................................................................. 9
Zero-Setting ........................................................................................................................................... 10
Price-computing .................................................................................................................................... 10
Taring ..................................................................................................................................................... 10
Fixe function ........................................................................................................................................ 10
9. Backlight an parameter settings ................................................................................................................. 12
Backlight setting .................................................................................................................................... 12
10. Care an maintenance ...................................................................................................................................... 12
Cleaning ................................................................................................................................................. 12
Faults an error messages ................................................................................................................. 12
Storage an Transport Con itions ..................................................................................................... 14
Disposal ................................................................................................................................................. 14
Warranty ................................................................................................................................................ 14
Recalibration ......................................................................................................................................... 14
11. Technical ata ........................................................................................................................................................ 15
12. Declaration of Conformity ................................................................................................................................. 16

LW100-210408-Rev002-UM-en 3
2. About this operating manual
This symbol means: "Consult operating instructions". To achieve accurate
results, rea the instructions for use carefully before use an follow all
instructions provi e therein. Keep the instructions for use for future reference.
General information
- This operating manual escribes the safe operation as well as the operation, care an
maintenance of the scale.
- Only compliance with the operating manual is consi ere inten e use.
- Please rea this operating manual carefully before connecting an using the scale. Failure
to observe this operating manual may result in injuries or amage to your pro uct.
- Our pro ucts are constantly being evelope an improve . For this reason, esign an
technical mo ifications are possible at any time. However, this has no influence on the
content of this manual.
This operating manual provi es you with the information you nee to start up the scale quickly.
To obtain accurate results, please rea the installation an operating manual carefully an
comply with the instructions containe therein. The scale may only be operate an maintaine
by traine personnel.
Storage
The operating manual is part of the scale. It must be kept in the imme iate vicinity of the scale
an must be easily accessible for everyone.
When reselling the scale, the operating manual must also be supplie .
Target group
This operating manual is inten e for personnel who are responsible for setting up, operating,
care an maintenance of the scale. Personnel who operate the scale must have rea an
un erstoo this operating manual before using it for the first time.
3. Safety instructions
It is essential that you rea , un erstan an follow all instructions in these instructions for use
as well as the country-specific installation stan ar s, the applicable safety regulations an
acci ent prevention regulations.
- Han le the scale with care an always keep in min that it is a precision measuring
instrument.
- Protect the weighing platform from impacts an vibrations an o not overloa the scale.
- The scale may only be operate an maintaine by traine an authorise skille personnel.
Han ling errors can lea to injuries or amage the scale.
- Before first use, make sure that the mains voltage an current type state on the name plate
match the mains voltage an current type at the place of use.
- Lay the cables so that they cannot lea to a trip hazar .
- Lay the cables so that they cannot pose a risk of strangulation.
- Operate the evice only within the permissible ambient con itions.
- Do not expose the scale to high temperatures, whether from neighbouring evices or irect
sunlight.
- Use the scale at constant ambient temperatures an avoi using in raughts, otherwise the
measurement results coul be falsifie .

4 LW100-210408-Rev002-UM-en
- Place the scale as far as possible from other evices or sources that generate
electromagnetic fiel or other interferences (e.g. strong motors an portable an mobile HF
communication evices) as these can falsify the measurement results.
- Use only approve accessories an peripherals.
- Before cleaning the evice, pull the mains a apter/plug out of the socket.
- Never clean the scale with abrasive or aggressive cleaning agents.
- Do not immerse the evice in water or other liqui s.
- If you have problems with this evice, e.g. when setting up, maintaining or using, please
contact the authorise customer service. Do not open or repair the evice yourself.
- Please notify the authorise customer service if unexpecte operations or events occur.
- If the weighing system is not use for a longer perio of time, it shoul be cleane an store
in a protective film. The a ition of a rying agent is esirable.
DO NOT use the scale:
- If the mains a apter is amage ;
- If the mains a apter is not working;
- If the battery compartment has an unnatural bulge;
- After long storage in a humi environment.
In such cases, please contact authorise customer support.
4. Intended use
Your ADE scale is a quality pro uct an was manufacture for use as a non-automatic scale.
The scale is use to etermine the weight an price of goo s to be weighe an is inten e for
use in supermarkets, grocery stores, retail stores, markets an similar areas of application.
To etermine the weight an price, carefully place the item to be weighe as centrally as
possible on the scale. The scale may be loa e with the maximum loa (Max) specifie on the
evice an on the nameplate. After a stable measurement result has been etermine , it can
be rea off.
The scale must not be use for ynamic weighing. If small quantities are slowly a e or
remove (e.g. filling liqui s), this can lea to incorrect measurement results.
The evice may only be use as inten e . All applications of the evice that are not mentione
in the chapter “Inten e use”, as well as non-observance of the safety instructions, are
consi ere improper use. It is the user of the evice, but not the manufacturer, who assumes
liability for any resulting amage to property or personal injury resulting from misuse.
The use of accessories other than the original accessories supplie by the manufacturer may
voi this warranty.
The eighing system may only be used for legal-for-trade eighing if it is
verified. The verification is invalid ithout a seal.
This device may not be modified ithout the manufacturer's permission.

LW100-210408-Rev002-UM-en 5
5. Scope of delivery
Check the elivery contents for completeness as soon as you receive the scale. Carefully
unpack the scale an accessories an remove all packaging materials.
Inclu e in the elivery are:
- Price computing scale
- Weighing platform
- Power supply unit
- Operating manual
- Declaration of Conformity
- Optional: Rechargeable battery 6V 4Ah (installe in the scale)
On verified scales: Check the identity of the scale serial numbers and the
declaration of conformity. This is a mandatory requirement to use the scale in
legal metrology!
6. Start-Up the scale
1. Carefully unpack the scale an accessories an remove all packaging materials.
2. Remove the transportation lock on the bottom of the scale, if present on your mo el. The
transportation locking evice is i entifie by the labels below:
Not removing the transportation lock can lead to incorrect eighing
results!
3. Place the scale on a level, stable surface. Do not place the scale on a shaky or vibrating
table as this will cause istortion of measurement results.
4. Connect one en of the power supply to the power connector on the bottom of the scale
an the other en to the local power supply.
In this case, before connecting the supplied mains adapter to the scale,
make sure that the voltage on the nameplate matches the local po er
supply.
After the arm-up time (15 minutes), the scale is ready for use.
The arm-up time applies to every disconnection from the mains
(except battery mode).
5. Align the scale using the support feet. Make sure that the air bubble of the spirit level is
centre in the black frame.
Check the horizontal position of the scale
after every change of location!

6 LW100-210408-Rev002-UM-en
6. Switch on the scale. When switching on the scale, the weighing platform must be
unloa e . The scale runs through a test programme an acknowle ges the en of the
power-on sequence with a soun signal.
If the eighing platform is loaded during the po er-on sequence, the
scale is not properly ready for operation. S itch off the scale and turn
it on again.
7. For precise measurement results, the goo s to be weighe must be place in the centre
of the weighing platform. The goo s to be weighe shoul not protru e beyon the
weighing platform.
7. Operating and display elements
Overvie
1 Weighing platform 4 Level in icator 7 Power supply
connection
2 Keypa 5 Battery in icator 8 Battery compartment
cover
3 Main isplay 6 On/off switch 9 Levelling feet
1
4
3
5
2
8
9 9
9
8
9
6
7

LW100-210408-Rev002-UM-en 7
Operating controls
Button terms and functions
Symbol Description Function
…
Keypad ith
10 keys
Keypa with 10 keys:
0 to 9 for price an PLU input.
Menu: To change parameters.
.
Double zero multifunction key:
To enter a " ouble zero”.
To a just the backlight.
C Delete key
Pressing this key eletes the last igit of basic price.
ZERO
Zeroing key
If this key is presse , the scale is returne to the zero
position.
TARE
Tare key
The object (e.g. a container) is tare by pressing it
once an the scale switches from gross to net mo e.
Tare mo e is in icate by "▼" above the NET imprint.
FIX
To activate or eactivate the price an automatic tare
value eletion.
The activate function is shown by “▼” above to the
FIX imprint.
Unit
Basic price unit
Switching between the price units per kg an per
100 g. “►” appears on the isplay in front of the
selecte unit (/kg or /100 g).

8 LW100-210408-Rev002-UM-en
Menu guidance keys
Symbol Description Function
TARE For calling an confirming function an parameter
settings
/
LEFT / RIGHT
Navigation
keys
To switch between the ifferent functions an
parameters.
ZERO To return to the higher-level function an the normal
weighing mo e.
Display
1 Display of the (net) weight of the item to be weighe
2 Display of the basic price (per kg)
3 Display of the total price etermine from (net) weight an basic price
Display symbols
Symbol Meaning
~ Display for stable weight measurement.
>0< Display for zeroing.
NET Display for activate tare function.
kg Display the weight in kilogramme.
/kg /100g Display of the basic price unit per kilogramme resp. per 100g.
FIX Display for activate fixe price function.
The in ications of the various functions are shown by arrows (▼) an (►) in the isplay.
1 2
3

LW100-210408-Rev002-UM-en 9
Battery status indicator
Display indication
Low battery in icator (only in battery mo e). The in ication of the function
is shown by an arrow (▼) in the isplay.
In or er to protect the scale, it switches off automatically 30 minutes after
the battery symbol lights up if the charging voltage is too low. The battery
must be fully charge before operating the scale again.
Caution: The in icator symbol on the isplay shows the battery charge level when the scale is
not connecte to the mains. When connecting the scale to the power supply, note the
LED isplay.
LED display
Green Mains operation.
Battery is charging. To ensure that the battery is fully charge , keep the
scale connecte to AC power for at least one hour.
Yellow Battery is charging.
re Battery almost ischarge . Please charge imme iately. Charging can take
up to twelve hours.
Caution: Please charge the battery fully before using it for the first time.
8. Using the scale
Preliminary Note
Do not loa the scale with weights that excee the maximum capacity. As soon as you perceive
the signal for an overloa - this is shown by “--oL--” on the isplay - imme iately remove the
loa from the scale so as not to irreparably amage the loa cell.
S itching the scale on and off
S itching on the scale
Remove all weights from the weighing surface.
To turn on the scale, press the on/off switch (on the right si e below the housing).
The scale performs a test program. All symbols an characters are briefly isplaye . En of
routine is confirme with an acoustic signal an "0.00 / 0.000" is shown on all three isplays.
The scale is now rea y for use.
Upon relocation an especially in case of temperature changes, wait for a warm-up phase of 15
minutes after switching on the instrument to stabilize the measurement results.
S itching off the scale
To turn off the scale, press the on/off switch (on the right si e below the housing).
Automatic deactivation of the scale
The scale is equippe with a power saving function. As a result, the scale switches off after a
perio of time that can be set by the user (see section 9).

10 LW100-210408-Rev002-UM-en
Zero-Setting
Press the key when the scale shows a weight, even though the weighing surface is
completely empty. The isplay “Weight” of the scale shows 0.000 again.
Price-computing
Place the sample on the weighing surface. The isplay "Weight" shows the weighing result. To
etermine the price, use the numeric keys to or the key to enter the price per
kilogram, which is shown in the isplay “Price”. The scale now automatically etermines the total
price, which is shown in the isplay "Total".
You can use the key to elete incorrect entries an then imme iately enter the correct price.
After removing the sample, the basic price isplay automatically returns to zero.
Taring
With this function, the user can weigh objects together with other items (such as container, film
or paper towel), without the weight of those items affecting the weighing result.
Turn on the scale.
Place the objects to be tare on the platform (e.g. container, foil or paper towel) an press the
key. On "Weight" isplay the scale shows 0.000. At the same time the arrow (▼) above the
NET symbol in icates the net weight mo e. As soon as you place the pro uct to be weighe in
the container, only the net weight of the pro uct to be weighe is isplaye .
Carry out as many weighing operations as require . As long as the tare container remains on
the weighing platform, only the net weighing results an the prices etermine for them will be
isplaye .
If no further input is ma e, the tare weight is shown as a negative value in the "Weight" isplay
when the tare container an the weighe goo s are remove . To elete the tare weight in this
case, press the key again when the weighing platform is unloa e .
If a weighing operation (with or without price etermination) is carrie out, the values are
automatically elete an the isplays for the tare weight an the basic price show zero after
the pro uct to be weighe an the tare weight are remove .
Fixed function
The fix function offers the possibility to use a always same basic price an /or tare weight for
repetitive weighing operations.
When the scale is restarte , the Fix function is always switche off.
Fixed price function
Enter the esire basic price using the number keys to . To fix this basic price, press
the key. The isplay "price" shows the entere basic price an ▼ at the FIX symbol shows
the activate FIX function.
If necessary, you can now place your empty container on the weighing platform an tare it by
pressing the key. Carry out as many weighing operations as you like to etermine the price
with this basic price.

LW100-210408-Rev002-UM-en 11
If you want to enter a new fixe price as basic price, press the key to elete the store
value. It is also possible to enter a new basic price value after the isplay has shown the entere
fixe price (basic price) for at least four secon s.
To exit the fixe price function, press the key.
Fixed tare function
Place the container to be tare on the weighing surface. Then press the key.
To tare, press the key. The isplay "Weight" now shows by the arrows ▼ at the symbol ~
a stable measuring result, at the symbol >0< the zero position an the NET symbol the net
weight mo e. The isplay "Price" shows the FIX function activate by ▼ at the FIX symbol.
To etermine the total price, enter the basic price an the isplay will show the total net price
for the loa on the scale. If the tare container an the pro uct to be weighe are remove from
the weighing surface, the arrow ▼ at the symbol >0< isappears, the tare weight is isplaye
as a negative value an the total price is elete .
Now you can carry out further weighing operations with the same tare vessel.
If you wish to store a new fixe tare weight, press the key when the weighing platform is
unloa e to elete the store tare weight. Place the new container to be tare on the weighing
platform an press the key again.
To en the fixe tare function, press the key.
Combined fixed price and tare function
To simultaneously store a fixe price as the basic price an fixe tare weight, enter the esire
basic price using the numeric keys to . Place the container to be tare on the weighing
surface an press the key. Then fix both values by pushing the key.
The isplay "Weight" now shows by the arrows ▼ at the symbol ~ a stable measuring result, at
the symbol >0< the zero position an at the symbol NET the net weight mo e. In the isplay
“Price” , the entere fixe price is shown as the basic price an ▼ for the FIX symbol in icates
the activate FIX function.
Now perform as many weighing operations as you wish with the same tare container an at
the same basic price.
If the tare container an the sample is remove from the loa plate, the arrow ▼ at the symbol
>0< isappears an the tare weight is isplaye as a negative value. The fixe basic price
remains on the isplay.
If you wish to store a new fixe tare weight, press the key to elete the store tare weight.
Place the new container to be tare on the weighing surface an press the key again.
If you wish to store a new fixe price as the base price, press the key to elete the store
base price an enter a new base price.
To en the combine fixe price an fixe tare function, press the key.

12 LW100-210408-Rev002-UM-en
9. Backlight and parameter settings
Backlight setting
Users can choose to enable or isable the backlighting of the scale isplay. Activating the
backlighting makes it easier to rea the weighing results, but at the same time lea s to
increase power consumption.
The scale offers three ifferent backlight setting options:
oFF: The backlight is switche off permanently.
on: The backlight is switche on permanently.
AUto: The backlight switches on automatically when the weighing surface is
loa e or after pressing a key, or off again after a short perio without
weight movement or pressing a key.
To set the backlight, follow the instructions below:
In the weighing mo e, press an hol the key for approximately 2 secon s.
The isplays "Weight" an " Price" show bLSET MODE. The isplay “Total” shows the
selecte option.
You can change the setting by pressing the irect PLU keys or .
Confirm your setting by pressing the key or cancel the proce ure by pressing the
key.
When the scale is turne off, the last settings you ma e will remain store .
10. Care and maintenance
Cleaning
Disconnect the mains plug before cleaning the scale. Use only a amp cloth or an or inary
isinfectant for cleaning. Do not use aggressive liqui cleaning agents, abrasive or aci ic
etergents or white spirit.
Make sure that no liqui cleaning agent or water penetrates the scale an always follow the
manufacturer's instructions for use.
Faults and error messages
Below you will fin a list of possible errors an faults. If necessary, these can be eliminate
with simple means. If the fault or error cannot be eliminate or other error messages occur,
please contact your service partner.

LW100-210408-Rev002-UM-en 13
Faults
Fault Cause Measure
The isplay
shows nothing.
The scale has switche off
automatically. Switch on the scale
The scale is not connecte to the
mains.
Use the optional mains a apter to
connect the scale to the mains.
Weight isplay is
unstable.
Draughts or air movements Close the win ow.
Choose a ifferent location.
Vibrations Avoi vibrations.
Choose a ifferent location.
Electromagnetic fiel s / static
charging
Choose a ifferent location. If
possible, switch off the interfering
evice.
The weighing
result is
obviously wrong.
The scale is not levelle
properly.
A just the support feet. Use the
spirit level to check the horizontal
position.
The scale is not operating in the
specifie temperature range.
Operate the scale only in the
permissible temperature ranges.
Electromagnetic fiel s / static
charging
Choose a ifferent location. If
possible, switch off the interfering
evice.
Zeroing is not
possible.
Zeroing is not possible if the
isplaye weight excee s +/- 2%
of the capacity of the scale.
In this case, switch the scale off an
on again.
Error messages
Failure Cause Measure
ERR 4 Current weight excee s the zero
range of the scale
Unloa the weighing surface an try
again.
If necessary, restart the scale.
ERR 5 Keypa fault Please contact your service partner.
ERR 6 Loa cell is efective or not
connecte . Please contact your service partner.
Err 9
Weighing result unstable ue to
raughts, air movement or
vibrations.
Avoi raughts, air movement an
vibrations.
Loa cell is efective. Please contact your service partner.
Err 19
Current weight excee s the
permissible range for automatic
zeroing when switche on.
Unloa the weighing surface an
then restart the scale if necessary.
--oL-- Zero range or weighing capacity
excee e Unloa the scale.
-- UL -- Un erloa (-20 ) Switch the scale off an on again.

14 LW100-210408-Rev002-UM-en
Storage and Transport Conditions
Keep all original packaging materials for a possible return of the scale to avoi amage in
transit. Disconnect all cables before transport an switch off the scale to avoi amage.
Disposal
Waste electrical equipment do not belong in household aste. Devices
ith this marking may not be disposed of as residual aste, but must
be recycled.
Remove (if possible) all batteries and rechargeable batteries from the
devices and send them to the battery disposal.
Make sure that only depleted batteries or batteries ith insulated poles
are disposed of so that there is no short circuit!
Warranty
ADE will repair or replace this pro uct if evi ence is provi e that it has faile within 1 year from
the ate of sale (proof of purchase is require ) ue to lack of workmanship or efective material.
All moving parts, such as batteries, cables, etc. are exclu e .
The use of accessories other than those approve by ADE, especially batteries, will voi the
warranty.
This warranty oes not cover external normal wear an tear or amage cause by acci ent or
misuse. The warranty will not apply for evices that have been opene by unauthorise persons.
The statutory rights of the customer are not affecte by this agreement in any way.
The ealer from whom the scale was purchase is responsible for complaints, customer service
an spare parts.
Recalibration
Accor ing to the national regulations of the legislature, only authorise companies or
authorise personnel can perform recalibration. On the CE mark, you can fin the year of
initial calibration next to the notifie bo y (0122).
Recalibration must be carrie out when:
- one or more security marks were amage ,
- after the scale has been repaire ,
- after expiry of the perio , set by the national regulations for recalibration.

LW100-210408-Rev002-UM-en 15
11. Technical data
Model: LW100-3
Maximum loa : 3 kg
Digit isplay: 1g
Minimum loa : 20g
Weighing surface: 265 x 205 mm stainless steel
Dimensions: 285 x 375 x 115 mm
Net weight: 2.8 kg / 3.4 kg (without / with accu)
Operating
temperature:
-10°C bis +40°C
Display: Easy to rea LCD isplay with 15 mm high characters
white LED backlight, isplay backlight can be eactivate
Housing: Stable plastic housing
Keypa : Easy to clean 10-key membrane keyboar with 16 keys
Functions: Weighing, taring, price computing
Fix function (fixe price + fixe tare)
Automatic zero setting
Overloa isplay
Battery level in icator (at low supply voltage)
Price entry/ isplay: Min. price entry: Preiseingabe/-anzeige:
Max. price entry: 999,99 €
Min. price isplay: 1 Cent
Max. price isplay: 9.999,99 €
Power Supply: Mains an battery operation
Power supply: 100-240VAC, 50/60Hz 0.32A max., Output: 12VDC,
500mA
Battery: 6V 4Ah lea battery, in battery operation up to approx. 70
operating hours
Battery protection: Automatic switch-off after 30 minutes after the battery symbol lights up
Spare parts:
Battery H2323-001
Battery compartment cover H2323-015
Loa plate H2317-012
Cover hoo H2323-020
Power supply H2323-014
Levelling feet H2323-011

16 LW100-210408-Rev002-UM-en
12. Declaration of Conformity
Declaration of conformity by the manufacturer
This pro uct has been manufacture in accor ance with the harmonise European stan ar s.
They conform to the regulations of the EC- irectives liste below:
- NAWI irective 2014/31/EU
- EMC Directive 2014/30/EU
- Low voltage irective 2014/35/EU
- RoHS Directive 2011/65/EU
in their respectively applicable versions.
This eclaration will lose its vali ity if any mo ification is ma e to the scale without our consent.
Hamburg, April 2021
ADE Germany GmbH
Neuer Hoeltigbaum 15
22143 Hamburg / Germany
Manufacturer: ADE Germany GmbH
Neuer Hoeltigbaum 15
22143 Hamburg / Germany
℡ [phone]
 [phone]
 info@a e-germany. e

www.a e
-
germany. e

LW100-210408-Rev002-UM-en 17

18 LW100-210408-Rev002-UM-en

LW100-210408-Rev002-UM-en 19

20 LW100-210408-Rev002-UM-en
Distributor: