Chauvet GigBAR IRC User manual

User Manual
LASER LIGHT RADIATION
DO NOT STARE INTO BEAM
CLASS 2M LASER PRODUCT
CLASSIFIED PER EN/IEC 60825-1:2007
Complies with FDA performance standards
for laser products except for deviations
pursuant to Laser Notice No. 50, dated June
24, 2007.
European Version

Page 2 of 96 GigBAR™ IRC User Manual Rev. 2
TABLE OF CONTENTS
1. Before You Begin................................................................................................................................6
What Is Included.......................................................................................................................................................6
Description................................................................................................................................................................6
Unpacking Instructions.............................................................................................................................................6
Claims .................................................................................................................................................................6
Manual Conventions.................................................................................................................................................6
Symbols....................................................................................................................................................................6
Disclaimer.................................................................................................................................................................6
Safety Notes.............................................................................................................................................................7
Non-Interlocked Housing Warning......................................................................................................................8
Laser Safety Notes...................................................................................................................................................8
Laser Safety Label Reproduction......................................................................................................................10
Laser Exposure Warning...................................................................................................................................11
Laser Emission Data.........................................................................................................................................11
Laser Compliance Statement............................................................................................................................11
2. Introduction.......................................................................................................................................12
Overview.................................................................................................................................................................12
Overview.................................................................................................................................................................13
Dimensions.............................................................................................................................................................14
3. Setup .................................................................................................................................................15
AC Power ...............................................................................................................................................................15
Fuse Replacement............................................................................................................................................15
Interlock Connector...........................................................................................................................................15
Power Linking....................................................................................................................................................15
Mounting.................................................................................................................................................................16
Orientation.........................................................................................................................................................16
Rigging ..............................................................................................................................................................16
Mounting Diagram.......................................................................................................................................16
Proper Usage .........................................................................................................................................................17
Interlock and Key....................................................................................................................................................17
4. Operation...........................................................................................................................................18
Control Panel Operation.........................................................................................................................................18
Menu Map...............................................................................................................................................................18
Configuration (Standalone) ....................................................................................................................................20
Sound Mixed Effect Sound-Active Mode ..........................................................................................................20
Auto Mixed Effect Automatic Mode...................................................................................................................20
Show Settings ...................................................................................................................................................20
Master/Slave .....................................................................................................................................................20
Mode .................................................................................................................................................................20
Master/Slave Mode (Cont.) ...............................................................................................................................21
Configuration (DMX)...............................................................................................................................................21
DMX Personality and Starting Address.............................................................................................................21
Custom Color Adjustment ......................................................................................................................................21
System Settings......................................................................................................................................................22
Default Pod Arrangement..................................................................................................................................22
Examples of Pod Order Rearrangement..........................................................................................................22
DMX Channel Assignments and Values...........................................................................................................23
19CH ...........................................................................................................................................................23
8 CH ............................................................................................................................................................25

GigBAR™ IRC User Manual Rev. 2 Page 3 of 96
3 CH ............................................................................................................................................................26
IRC-6 (Infrared Remote Control 6) Operation...................................................................................................27
Footswitch Operation ........................................................................................................................................28
5. Technical Information.......................................................................................................................29
Product Maintenance .............................................................................................................................................29
6. Technical Specifications.................................................................................................................. 30
Returns..................................................................................................................................................32
Contact Us.............................................................................................................................................33
1. Antes de Empezar.............................................................................................................................34
Que va Incluido.......................................................................................................................................................34
Descripción.............................................................................................................................................................34
Instrucciones de Desembalaje ...............................................................................................................................34
Reclamaciones..................................................................................................................................................34
Convenciones del Manual......................................................................................................................................34
Símbolos.................................................................................................................................................................34
Exención de Responsabilidad................................................................................................................................34
Notas de Seguridad................................................................................................................................................35
Advertencia sobre Carcasa no Enclavada........................................................................................................37
Notas de Seguridad sobre Láser............................................................................................................................37
Reproducción de la Etiqueta de Seguridad del Láser.......................................................................................39
Advertencia sobre Exposición al Láser.............................................................................................................40
Datos de Emisión Láser....................................................................................................................................40
Declaración de Conformidad Láser...................................................................................................................40
2. Introdución........................................................................................................................................41
Vista General..........................................................................................................................................................41
Vista General..........................................................................................................................................................42
Dimensiones...........................................................................................................................................................43
3. Configuración ...................................................................................................................................44
Corriente Alterna ....................................................................................................................................................44
Sustitución del Fusible ......................................................................................................................................44
Conector de Enclavamiento..............................................................................................................................44
Alimentación en Cadena...................................................................................................................................44
Montaje...................................................................................................................................................................45
Orientación........................................................................................................................................................45
Colocación.........................................................................................................................................................45
Diagrama de Montaje..................................................................................................................................45
Uso Adecuado........................................................................................................................................................46
Enclavamiento e Interruptor de Llave.....................................................................................................................46
4. Funcionamiento................................................................................................................................47
Funcionamiento del Panel de Control....................................................................................................................47
Mapa de Menú........................................................................................................................................................47
Configuración (Independiente)...............................................................................................................................50
Modo Efecto Mezclado de Sonido Activo por Sonido.......................................................................................50
Modo Efecto Mezclado Automático...................................................................................................................50
Configuración del Show ....................................................................................................................................50
Modo Maestro/Esclavo......................................................................................................................................51
Configuración (DMX)..............................................................................................................................................52
Personalidad DMX y Dirección de Inicio...........................................................................................................52
Ajuste de Color Personalizado...............................................................................................................................52
Configuración de Sistema ......................................................................................................................................53
Disposición de las Unidades por Defecto .........................................................................................................53

Page 4 of 96 GigBAR™ IRC User Manual Rev. 2
Ejemplos de Recolocación del Orden de las Unidades....................................................................................53
Asignaciones de Canal y Valores DMX ............................................................................................................54
19CH ...........................................................................................................................................................54
8 CH ............................................................................................................................................................56
3 CH ............................................................................................................................................................57
Funcionamiento del IRC-6 (Control Remoto por Infrarrojos 6).........................................................................58
Funcionamiento del Conmutador de Pie...........................................................................................................59
5. Información Técnica......................................................................................................................... 60
Mantenimiento del Producto...................................................................................................................................60
6. Especificaciones Técnicas...............................................................................................................61
Devoluciones ........................................................................................................................................63
Contacto................................................................................................................................................64
1. Avant de Commencer.......................................................................................................................65
Contenu..................................................................................................................................................................65
Description..............................................................................................................................................................65
Instructions de Déballage.......................................................................................................................................65
Réclamations.....................................................................................................................................................65
Conventions Manuelles..........................................................................................................................................65
Symboles................................................................................................................................................................65
Clause de Non Responsabilité...............................................................................................................................66
Consignes de Sécurité ...........................................................................................................................................66
Avertissement de Boîtier non-Verrouillé............................................................................................................69
Consignes de Sécurité des Lasers.........................................................................................................................69
Reproduction de l'Etiquette de Sécurité Laser..................................................................................................71
Avertissement d'Exposition au Laser................................................................................................................72
Données d'émission laser.................................................................................................................................72
Déclaration de Conformité Laser ......................................................................................................................72
2. Introduction.......................................................................................................................................73
Vue d'Ensemble .....................................................................................................................................................73
Vue d'Ensemble .....................................................................................................................................................74
Dimensions.............................................................................................................................................................75
3. Configuration....................................................................................................................................76
Alimentation CA......................................................................................................................................................76
Remplacement des fusibles..............................................................................................................................76
Un Connecteur de Verrouillage.........................................................................................................................76
Chaînage Électrique..........................................................................................................................................76
Installation ..............................................................................................................................................................77
Orientation.........................................................................................................................................................77
Montage ............................................................................................................................................................77
Schéma de Montage...................................................................................................................................77
Utilisation Appropriée .............................................................................................................................................78
Verrouillage et Interrupteur à Clé...........................................................................................................................78
4. Fonctionnement................................................................................................................................79
Utilisation du panneau de commande....................................................................................................................79
Plan du Menu .........................................................................................................................................................79
Configuration (Autonome) ......................................................................................................................................82
Mode effet Mélangé Activé par le Son..............................................................................................................82
Mode Effet Mélangé Automatique.....................................................................................................................83
Paramètres du Spectacle..................................................................................................................................83
Mode Maître/Esclave ........................................................................................................................................83

GigBAR™ IRC User Manual Rev. 2 Page 5 of 96
Configuration (DMX)...............................................................................................................................................84
Personnalité DMX et Adresse DMX de Départ.................................................................................................84
Réglage de Couleur Personnalisé..........................................................................................................................84
Paramètres système...............................................................................................................................................85
Disposition par Défaut des Modules .................................................................................................................85
Des Exemples de Modification de l'Ordre des Modules ...................................................................................85
Affectation de Canaux DMX et Valeurs ............................................................................................................86
19CH ...........................................................................................................................................................86
8 CH ............................................................................................................................................................88
3 CH ............................................................................................................................................................89
Fonctionnement avec l'IRC-6 (Télécommande par infrarouge 6).....................................................................90
Fonctionnement avec la Pédale........................................................................................................................91
5. Informations Techniques .................................................................................................................92
Entretien de l'Appareil ............................................................................................................................................92
6. Spécifications Techniques...............................................................................................................93
Renvois .................................................................................................................................................95
Nous Contacter.....................................................................................................................................96

Page 6 of 96 GigBAR™ IRC User Manual Rev. 2
1. BEFORE YOU BEGIN
What Is
Included
•GigBAR™ IRC
•Power Cord
•2 L-Brackets
•Wireless Footswitch with Battery
•VIP Gear Bag
•Interlock Key
•Remote Interlock Connector
•Tripod Stand
•Tripod Carry Bag
•Warranty Card
•User Manual
Description
The GigBAR™ IRC is the ultimate all-in-one system that includes two RGB LED rotating derby
effects, two high-power tri-color LED PARs, a green laser and a white strobe multi-output
effect. Easily allows for separate color and program control of each of the individually
adjustable heads. IRC-6 remote control sold separately.
Unpacking
Instructions
Carefully unpack the product immediately and check the box to make sure all the parts are in
the package and are in good condition.
Claims
If the box or the contents (the product and included accessories) appear damaged from
shipping or show signs of mishandling, notify the carrier immediately, not Chauvet. Failure to
do so in a timely manner may invalidate your claim with the carrier. In addition, keep the
container and all the packing material for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or
concealed damage, file a claim with Chauvet within 7 days of delivery.
Manual
Conventions
Convention
Meaning
1–512
A range of values
50/60
A set of values of which only one can be chosen
Settings
A menu option not to be modified
Menu > Settings
A sequence of menu options to be followed
<ENTER>
A key to be pressed on the product’s control panel
ON
A value to be entered or selected
Symbols
Symbol
Meaning
Critical installation, configuration, or operation information. Ignoring this
information can cause the product to not work, damage it, or cause harm to
the operator.
Important installation or configuration information. The product may not
function correctly if this information is not used.
Useful information.
Disclaimer
The information and specifications contained in this document are subject to change without
notice. Chauvet assumes no responsibility or liability for any errors or omissions that may
appear in this manual, and reserves the right to revise or recreate this manual at any time.
Download the latest version from http://www.chauvetlighting.com/product-manuals-literature/.
© Copyright 2014 Chauvet. All rights reserved. Printed in P.R.C.
Electronically published by Chauvet in the United States of America.
Author
Date
Editor
Date
A. Leon 09/22/14 M. Trouard 09/22/14

GigBAR™ IRC User Manual Rev. 2 Page 7 of 96
Safety Notes
The Safety Notes include important laser system safety information. Read and understand all
instructions before powering on the laser for the first time
. Knowing these safety instructions is
crucial to avoiding laser eye injury and breaking the law. Keep this User Manual
in a safe place
for future reference.
STOP AND READ ALL LASER SAFETY DATA
•Lasers can be hazardous and have unique safety considerations. Permanent eye injury and
blindness is possible if lasers are used incorrectly. Pay close attention to each safety
REMARK and WARNING statement in this User Manual. Read all instructions carefully
BEFORE operating this device.
•Always connect the product to a grounded circuit to avoid the risk of electrocution.
•Always disconnect the product from the power source before cleaning.
•Avoid direct eye exposure to the light source while the product is on.
•Make sure the power cord is not crimped or damaged.
•Never disconnect the product from power by pulling or tugging on the cord.
•If mounting the product overhead, always secure to a fastening device using a safety cable.
•Make sure there are no flammable materials close to the product when operating.
•Do not touch the product’s housing when operating because it may be very hot.
•This product is not intended for permanent installation.
•Always make sure that the voltage of the outlet to which you are connecting the product is
within the range stated on the decal or rear panel of the product.
•The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose the
product to rain or moisture.
•Always install the product in a location with adequate ventilation, at least 20 in (50 cm) from
adjacent surfaces.
•Be sure that no ventilation slots on the product’s housing are blocked.
•Never connect the product to a dimmer.
•Always use the mounting bracket to carry the product.
•Do not switch the product on/off in short intervals. This will reduce the laser diode life.
•Do not shake this product. Avoid brute force when mounting or operating this product.
•ALWAYS use a safety cable when mounting the product overhead.
•The maximum ambient temperature (Ta) is 104 °F (40 °C). Do not operate the product at
higher temperatures.
•In the event of a serious operating problem, stop using the product immediately.
•Never try to repair the product. Repairs carried out by unskilled people can lead to damage
or malfunction. Contact the nearest authorized technical assistance center.
CAUTION! Use of controls, adjustments, or procedures other than THOSE specified IN
THIS USER MANUAL may result in hazardous radiation exposure.
•Chauvet requires the placement of sandbags on the base of the stand for added
stability.
•DO NOT go past the printed stopping point on the mast.
•DO NOT over-tighten the knob at the tripod mounting insertion point, as it may
damage the mast of the stand.
•DO NOT use this stand in any way that it was not intended.

Page 8 of 96 GigBAR™ IRC User Manual Rev. 2
•Avoid direct eye contact with laser light. Never intentionally expose your eyes or others to
direct laser light.
•This laser product can potentially cause instant eye injury or blindness if laser light directly
strikes the eyes.
•It is illegal and dangerous to shine this laser into audience areas, where the audience or
other personnel could get direct laser beams or bright reflections into their eyes.
•It is a illegal to shine any laser at aircraft.
•Use of controls, adjustments, or procedures other than those specified in this User Manual
may result in hazardous radiation exposure.
•DO NOT attempt any repairs. Repairs and servicing must be carried out by a certified
technician. Unauthorized modifications are forbidden for safety reasons!
•Keep this User Manual for future consultation. If transferring ownership of the product
to another user, be sure this document is kept with the laser.
Non-Interlocked
Housing Warning
•This unit contains high power laser devices internally.
•This unit will not turn off automatically or stay off if you open its housing (non-interlocked
housing).
•Do not operate the laser if the housing is open due to potential exposure to unsafe levels of
laser radiation.
•The laser power levels, accessible if the unit is open when in operation, can cause instant
blindness, skin burns, and fires.
Laser Safety
Notes
STOP AND READ ALL THE LASER SAFETY NOTES BELOW
Laser light is different from any other light. Laser light can cause eye injury if the product is not
set up and used properly. Laser light is a thousand times more concentrated than
any other kind
of light. This concentration can cause instant eye injuries by burning the retina (the light-
sensitive portion at the back of the eye). The heat from a laser light cannot be felt, but it can still
injure or blind product operators and the audience. Even very small amounts of laser light
at
long distances are are potentially hazardous.
DO NOT stare into the beam, at any time. Class 2M Laser product emit laser radiation.
DO NOT point the device towards anyone’s eyes.

GigBAR™ IRC User Manual Rev. 2 Page 9 of 96
•Do not operate the laser without first reading and understanding all the safety and technical
data in this manual.
•ALWAYS set up and install all laser effects so that any laser light is at least 3 meters
(9.8 feet) above the floor on which people are standing. See the Proper Usage section of
this manual.
•After setup, and prior to public use, test the lasers to ensure they are functioning properly.
Do not use the product if any defect is detected.
•DO NOT use laser if it is emitting only one or two beams, rather than dozens/hundreds, as
this indicates damage to the diffraction grating optic, and allows emission of laser levels
higher than Class 2M.
•DO NOT point lasers at people or animals.
•DO NOT look into the laser aperture or laser beams.
•DO NOT point lasers into areas where people could be exposed to them..
•DO NOT point lasers at highly reflective surfaces such as windows, mirrors, and shiny metal.
Even laser reflections can be hazardous.
•Never point a laser at aircraft; check your local laws for restrictions before using this laser.
•Never point un-terminated laser beams into the sky.
•Do not expose the output optic (aperture) to harsh cleaning chemicals.
•Do not use the laser if the housing is damaged, open, or if the optics appear damaged in any
way.
•Never open the laser housing. The high laser power levels inside of the protective housing
can start fires or burn skin, and will cause instant eye injury.
•Never leave this product running unattended.
•The legal requirements for using laser entertainment products vary from country to country.
The user is responsible for the legal requirements in the location/country of use.
CAUTION! Do not operate this device in ways not specified in this User Manual. Failure to follow the
instructions will void the warranty, may damage the product, or injure the user or the audience.
CAUTION! This product cannot be discarded with household waste. Contact your local waste
management service for electronic disposal regulations in your area.

Page 10 of 96 GigBAR™ IRC User Manual Rev. 2
Laser Safety Label
Reproduction
GigBAR™ IRC
Rear
Footswitch Rear

GigBAR™ IRC User Manual Rev. 2 Page 11 of 96
Laser Exposure
Warning
LASER LIGHT AVOID DIRECT EYE EXPOSURE
Further guidelines and safety programs for safe use of lasers can be found in the ANSI Z136.1
Standard “For Safe Use of Lasers”, available from the Laser Institute of America:
www.laserinstitute.org. Many local governments, corporations, agencies, military,
and others,
require all lasers to be used under the guidelines of ANSI Z136.1. Laser Display guidance can
be obtained via the International Laser Display Association: www.laserist.org.
Laser Emission
Data
As measured under
IEC measurement
conditions for
classification
Laser Classification Class 2M
Green Laser Medium DPSS Nd:YVO4, 532 nm/30 mW
Beam Diameter <5 mm at aperture
Pulse Data All pulses < 4 Hz (>0.25 sec)
Divergence (each beam) <2 mrad
Divergence (total light) <160 degrees
Laser Power of Each Beam from Aperture <5 mW
Laser
Compliance
Statement
This laser product complies with EN/IEC 60825-1 Ed 2, 2007-03, and U.S. FDA/CDRH
FLPPS via the terms of Laser Notice No. 50 dated June 24, 2007.
This laser device is
classified 2M. (Class 2M is the international equivalent of U.S. Class IIIa.)
No maintenance
is required to keep this product in compliance with laser performance standards.

Page 12 of 96 GigBAR™ IRC User Manual Rev. 2
2. INTRODUCTION
Overview
Mast
Collar
Safety Pin
Positioning
Holes
Tension
Knob
Tripod
Legs
Tripod
Stand

GigBAR™ IRC User Manual Rev. 2 Page 13 of 96
Overview
(Cont.)
Wireless
Antenna
Power
Out
Fuse
Holder
DMX
In/Out
Menu
Buttons
Sound Sensitivity
Adjustment Knob
LCD
Display Rear IR
Sensor
Back Panel View
Underside Panel View
Front View
Power In
Pod Mounting
Locations
Output Ports
for Pods 3 & 4
Output Ports
for Pods 1 & 2
Laser
Strobes
Strobes
Kinta 1
Kinta 2
Par 1 Par 2
IR
Sensor
Microphone
Key
Switch
Interlock
Key Switch
Detail

Page 14 of 96 GigBAR™ IRC User Manual Rev. 2
Dimensions
At maximum
8.3 ft
2.5 m
4.3 in
110 mm
15.2 in
387 mm
46.7 in
1,185 mm

GigBAR™ IRC User Manual Rev. 2 Page 15 of 96
3. SETUP
AC Power
The GigBAR™ IRC has an internal auto-
ranging power supply and it can work with an input
voltage range of 100 to 240 VAC, 50/60 Hz.
To determine the product’s power requirements (
circuit breaker, power outlet, and wiring), use
the current value listed on the label affixed to the product’s back panel, or refer to
Technical
Specifications in this manual. The listed current rating indicates the product
’s average current
draw under normal conditions.
Always connect the product to a protected circuit (circuit breaker or fuse). Make sure the
product has an appropriate electrical ground to avoid the risk of electrocution or fire.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the
rheostat or dimmer channel serves only as a 0 to 100% switch.
Fuse
Replacement
Disconnect the product from power.1.
Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.2. Pry the fuse holder out of the housing.3. Remove the blown fuse from the holder.4. Replace with a fuse of the exact same type and rating.5.
Insert the fuse holder back in place and reconnect power.6.
Disconnect the product from power before replacing the fuse.
The product does not ship with a spare fuse; however, the safety cap has room for a spare.
Always replace a blown fuse with a fuse of the same type and rating.
Interlock
Connector
This product has a jack for a remote interlock switch that would shut off the laser output in case
of emergency. You may use the provided remote interlock connector to build your own interlock
switch.
Power Linking
Power linking is when products are daisy chained together through the power in and power
out
plugs, allowing many products to be powered from one wall outlet.
Up to 29 GigBAR™ IRC products can be power linked at 230 V.
Do not power link more than 29 GigBAR™ IRC on 230 V.
Installed fuse
(held by plastic clip)
Spare fuse holder
(inside safety cap)
Safety cap

Page 16 of 96 GigBAR™ IRC User Manual Rev. 2
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the
Safety Notes.
Orientation
The GigBAR™ IRC must be mounted in a position that includes planning for safe laser usage.
In addition, make sure adequate ventilation is provided around the product.
Rigging
•Before deciding on a location for the product, always make sure there is easy access to the
product for maintenance and programming.
•Make sure that the structure or surface onto which you are mounting the product can support
the product’s weight (see Technical Specifications).
•When mounting the product overhead, always use a safety cable (such as CH-05 from
Chauvet). Mount the product securely to a rigging point, such as an elevated platform or a
truss.
•The bracket adjustment knobs allow for directional adjustment when aiming the product to
the desired angle. Only loosen or tighten the bracket knobs manually. Using tools could
damage the knobs.
•When mounting to the tripod, be sure the stand is tightened properly and leveled.
Mounting Diagram
L-Brackets
Mounting Clamp
Tripod Mounting
Insertion Point
Bracket Adjustment
Knobs
Mounting Clamp
Bracket Adjustment
Knobs
Pod 1
Pod 2
Pod 3
Pod 4
Safety Cable

GigBAR™ IRC User Manual Rev. 2 Page 17 of 96
Proper Usage
This product is for overhead mounting only. For safety purposes, Chauvet recommends
mounting lighting effect products on steady elevated platforms or sturdy overhead supports
using suitable hanging clamps. In all cases, use safety cables. Obtain appropriat
e mounting
hardware from your lighting vendor.
International laser safety regulations require that laser products must be operated in the fashion
illustrated below, with a minimum of 3 meters (9.8 ft) of vertical separation between the floor and
the lowest laser light. Additionally, 3 meters of horizontal separation is required between laser
light and audience or other public spaces.
CAUTION! Use of controls, adjustments, or procedures other than THOSE specified IN
THIS USER MANUAL may result in hazardous radiation exposure.
•Chauvet requires the placement of sandbags on the base of the stand for added
stability.
•
IMPORTANT: DO NOT go past the printed stopping point on the mast.
•DO NOT over-tighten the parbar, as it may damage the stand.
•DO NOT use this stand in any way that it was not intended.
Interlock and
Key
This product has an interlock and key to prevent the laser from operating unless the
interlock
and the key are both inserted and the key is turned to the ON position.
For the laser to function, you must BOTH:
•insert the interlock
•insert the key and turn it to the ON position
Otherwise, if both are not performed, the laser will not turn on.
Always turn the key to the OFF position and remove it when leaving this product
unattended to prevent accidents or injuries to third parties.
ON
Insert the
Interlock
Insert and Turn
the Key to the
ON Position

Page 18 of 96 GigBAR™ IRC User Manual Rev. 2
4. OPERATION
This product is not designed for continual use. Make sure there are regular breaks during operation to maximize the life
of your laser. Always disconnect the GigBAR™ IRC from power when not in use.
Control Panel
Operation
To access the control panel functions, use the four buttons located underneath the display.
When the product is on, the LED monitor on the rear panel will show the current operating mode
(Standalone or DMX). The product will retain the last saved settings when powered off.
Button
Function
<MENU>
Selects an operation mode or backs out of the current menu option
<UP>
Scrolls up the list of options or selects a higher value
<DOWN>
Scrolls down the list of options or selects a lower value
<ENTER>
Activates a menu option or a selected value
Menu Map
Mode
Programming Levels
Description
AUTO Mixed Effect AM**
AM01–AM02
Selects the auto mixed effect show
F 01–F 99
Selects auto mixed effect speed
SOUND Mixed Effect SM**
SM01–SM02
Selects the sound mixed effect show
F 01–F 99
Selects the sound mixed effect speed
SHOW Settings SHOW
After pressing <ENTER>, selects different show
settings, in which you can choose mixed style effects
show or Par-only effects.
Auto Par Effect AP** AP01– AP07 Selects the Par show
F 01–F 99 Selects the Par show speed
Auto Kinta Effect AK01 AK01 Selects the kinta auto show
F 01–F 99 Selects the kinta auto speed
Auto Laser Effect AL01 AL01 Selects the laser auto show
F 01–F 99
Selects the laser auto show speed
Auto Strobe Effect AS** AS01–AS09 Selects the auto strobe shows
F 01–F 99 Selects the auto strobe show speed
Auto Par+Kinta APK1
APK1
Selects the Par and kinta auto show
F 01–F 99
Selects the Par and kinta auto show speed
Auto Par + Laser APL1
APL1
Selects the Par and laser auto show
F 01–F 99
Selects the Par and laser auto show speed
Auto Par + Strobe APS1 APS1 Selects the Par and strobe auto show
F 01–F 99 Selects the Par and strobe show speed
Auto Kinta + Laser AKL1 AKL1 Selects the kinta and laser auto show
F 01–F 99 Selects the kinta and laser auto show speed
Auto Kinta + Strobe AKS1 AKS1 Selects the kinta and strobe auto show
F 01–F 99 Selects the kinta and strobe auto who speed

GigBAR™ IRC User Manual Rev. 2 Page 19 of 96
Par + Kinta + Laser APKL APKL Selects the Par, kinta, and laser show
F 01–F 99 Selects the Par, kinta, and laser show speed
Par + Kinta +
Strobe APKS APKS Selects the Par, kinta, and strobe show
F 01–F 99 Selects the Par, kinta, and strobe speed
Par + Laser +
Strobe APLS APLS Selects the Par, laser, and strobe show
F 01–F 99 Selects the Par, laser, and strobe show speed
Kinta + Laser +
Strobe AKLS AKLS Selects the kinta, laser, and strobe show
F 01–F 99 Selects the kinta, laser, and strobe speed
Sound Par Effect
SP**
SP01–SP07
Set Pars to Sound mode
Sound Kinta Effect
SK01
Sets kintas to Sound mode
Sound Laser Effect
SL01
Sets laser to Sound mode
Sound Strobe
Effect
SS** SS01–SS10 Sets strobes to Sound mode and selects effect speed
Sound Par + Kinta
SPK1
Sets Pars and kintas to Sound mode
Sound Par + Laser
SPL1
Sets Pars and laser Sound mode
Sound Par + Strobe
SPS1
Sets Pars and strobes to Sound mode
Sound Kinta +
Laser
SKL1 Sets kintas and laser to Sound mode
Sound Kinta +
Strobe
SKS1 Sets kintas and strobes to Sound Mode
Par + Kinta + Laser
SPKL
Sets Pars, kintas and laser to Sound mode
Par + Kinta +
Strobe
SPKS Sets Pars, kintas and strobes to Sound mode
Par + Laser +
Strobe
SPLS Sets Pars, laser and strobes to Sound mode
Kinta + Laser +
Strobe
SKLS Sets kintas, laser and strobes to Sound mode
General COLOR Setting CoLo
R**
R000–R255
Sets both Par and kinta red values
G**
G000–G255
Sets both Par and kinta green values
B**
B000–B255
Sets both Par and kinta blue values
DMX Mode Setting D**
3 CH
Selects the DMX personality
8 CH
19CH
DMX Address d001–d512 Sets DMX starting address; DMX range restricted by
number of channels in the selected DMX mode
Master/Slave Setting
Slav
Sets to Slave mode
System Options Sys
dSET
1234
Changes arrangement of pods
rSEt
Resets to factory defaults
WiFi
on
Turns on/off Wi-Fi™ antenna for wireless footswitch
off

Page 20 of 96 GigBAR™ IRC User Manual Rev. 2
Configuration
(Standalone)
Set the product in one of the Standalone modes to control without a DMX controller.
Connect the product to a suitable power outlet.
Never connect a product that is operating in any Standalone mode (Automatic or Sound-
Active
) to a DMX string connected to a DMX controller. Products in Standalone mode may
transmit DMX signals that could interfere with the DMX signals from the controller.
Sound Mixed
Effect Sound-
Active Mode
To enable the sound mixed effect (Sound-Active All) mode, do the following:
Press <MENU> repeatedly until SM** blinks on the display.1. Press <ENTER>.2. Use <UP> or <DOWN> to select the desired Sound-Active mode (SM01 or SM02).3. Press <ENTER> to put the fixture into the selected Sound-Active mode.4. Turn the music on and adjust the sound sensitivity knob until the product starts responding to
the beat of the music.
•
The product will only respond to low frequencies of music (bass and drums).
•The laser will blackout when in Sound-Active mode after 3 seconds of silence or noise
below the sensitivity setting.
Auto Mixed
Effect
Automatic
Mode
To enable the auto mixed effect (Automatic All) mode, follow the instructions below:
Press <MENU> repeatedly until AM** blinks on the display.1. Press <ENTER>.2. Use <UP> or <DOWN> to select the desired Automatic mode (AM01 or AM02).3. Press <ENTER>.4. Use <UP> or <DOWN> to adjust the mode speed, F 01 (fast) to F 99 (slow).5. Press
<ENTER>
.6.
Show Settings
To choose mixed style effect shows or Par-only effects, follow the instructions below and
refer to
the Menu Map for programming steps:
1. Press <MENU> repeatedly until SHOW blinks on the display.
2. Press <ENTER> to next programming level.
3. Use <UP> or <DOWN> to scroll through the different individual Auto or Sound show options.
4. Press <ENTER> to put the fixture into the selected mode.
5. Use <UP> or <DOWN>to adjust the mode speed, F 01 (fast) to F 99 (slow).
6. Press <ENTER>.
Master/Slave
Mode
The Master/Slave mode allows a single GigBAR™ IRC
product (the master) to control the
actions of one or more GigBAR™ IRC products (the slaves) without the need for
a DMX
controller. The master will be set to operate in either Automatic or Sound-
Active mode, while the
slaves will be set to operate in Slave mode. Once set and connected, the slave units will operate
in unison with the master.
Configure the products as indicated below.
For every slave:
Press <MENU> repeatedly until Slav blinks on the display.1. Press <ENTER> to put the fixture in Slave mode. The display will continue to blink.2. Repeat steps 1 and 2 for every slave.3. Connect the DMX output of the first slave unit to the DMX input of the next slave unit.4. Connect the DMX input of each subsequent slave unit to the DMX output of the previous5.
slave unit.
•Configure all the slave units before connecting the master to the DMX daisy chain.
•The display on the slaves will continue to blink until the slaves are receiving a DMX
signal from the master.