Chauvet COLORado Batten 72 Tour User manual

User Manual

Edition Notes
COLORado™ Batten 72 Tour User Manual Rev. 4
Edition Notes
The COLORado™ Batten 72 Tour Tour User Manual Rev. 4 covers the description,
safety precautions, installation, programming, operation, and maintenance of the
COLORado™ Batten 72 Tour. CHAUVET®
released this edition of the
COLORado™ Batten 72 Tour User Manual in May 2014.
Trademarks
CHAUVET® is a registered trademark of CHAUVET & Sons Inc. (d/b/a CHAUVET®
or Chauvet). The CHAUVET® logo in its entirety including the CHAUVET® name
and the dotted triangle, and all other trademarks i
n this manual pertaining to
services, products, or marketing statements (example: It’s Green Thinking™
) are
owned or licensed by CHAUVET®. Any other
product names, logos, brands,
company names, and other trademarks featured or referred to within this document
are the property of their respective trademark holders.
Copyright Notice
CHAUVET® owns the content of this User Manual in its entirety, including but not
limited to pictures, logos, trademarks, and resources.
© Copyright 2014 CHAUVET®. All rights reserved.
Electronically published by CHAUVET® in the United States of America.
Manual Usage
CHAUVET® authorizes its customers to download and print this manual for
professional information purposes only. CHAUVET® expressly prohibits the usage,
copy, storage, distribution, modification, or printing of this manual or its content for
any other purpose without written consent from CHAUVET®.
Document Printing
For better results, print this document in color, on letter size paper (8.5 x 11 in),
double-sided. If using A4 paper (210 x 297 mm), configure your printer to scale the
content accordingly.
Intended Audience
Any person in charge of installing, operating, and/or maintaining this product should
completely read through the guide that shipped with the product, as well as this
manual, before installing, operating, or maintaining this product.
Disclaimer
CHAUVET® believes that the information contained in this manual is accurate in all
respects. However, CHAUVET® assumes no responsibility for any errors or
omissions in this document. CHAUVET® reserves the right to revise and make
changes to the content of this document without obligation that CHAUVET® notify
any person or company of such revision or changes. This does not in any way
constitute a commitment by CHAUVET® to make such changes. CHAUVET® may
issue a revision of this manual or a new edition to incorporate such changes.
Document Revision
The COLORado™ Batten 72 Tour User Manual Rev. 4
supersedes all previous
versions of this manual. Discard any older versions of this manual you may have,
whether in printed or electronic format, and replace with this version.
Author Date Editor Date
D. Couppe 5/1/14 A. Leon 5/1/14

Table of Contents
COLORado™ Batten 72 Tour User Manual Rev. 4 -i-
Table of Contents
1. Before You Begin...............................................................................................1
What Is Included .................................................................................................................1
Unpacking Instructions........................................................................................................1
Claims .........................................................................................................................................1
Typographic Conventions ...................................................................................................1
Icons....................................................................................................................................1
Safety Notes........................................................................................................................2
Expected LED Lifespan ......................................................................................................2
2. Introduction........................................................................................................3
Product Description.............................................................................................................3
Features..............................................................................................................................3
Additional Features......................................................................................................................3
Product Overview................................................................................................................4
3. Setup...................................................................................................................5
AC Power............................................................................................................................5
AC Plug .......................................................................................................................................5
Power Linking..............................................................................................................................5
Fuse Replacement ......................................................................................................................5
DMX Linking........................................................................................................................6
DMX Modes.................................................................................................................................6
Master/Slave Connectivity...........................................................................................................6
Mounting .............................................................................................................................7
Orientation...................................................................................................................................7
Rigging........................................................................................................................................7
4. Operation............................................................................................................8
Control Panel Description ...................................................................................................8
Control Options...................................................................................................................8
Programming.......................................................................................................................8
DMX Personality..........................................................................................................................8
DMX Control................................................................................................................................9
Static Color..................................................................................................................................9
Auto Programs.............................................................................................................................9
Edit Customs...............................................................................................................................9
Master/Slave..............................................................................................................................10
Color Settings............................................................................................................................10
Dimmer Curves..........................................................................................................................10
Control Panel Lock....................................................................................................................11
Program Upload ........................................................................................................................11
Reset.........................................................................................................................................11
Whites Setting ...........................................................................................................................12
Fan Setting................................................................................................................................12
Menu Map.........................................................................................................................13
DMX Values......................................................................................................................15
TOUR ........................................................................................................................................15
TOUR (Cont.) ............................................................................................................................16
TR16..........................................................................................................................................17
TR16 (Cont.)..............................................................................................................................18
BLOCK1 ....................................................................................................................................19
BLOCK2 ....................................................................................................................................19
ARC1.........................................................................................................................................19
ARC1 + D..................................................................................................................................19
ARC2.........................................................................................................................................20
ARC2 + D..................................................................................................................................20

Table of Contents
-ii- COLORado™ Batten 72 Tour User Manual Rev. 4
ARC2 + S ..................................................................................................................................20
HSV...........................................................................................................................................20
5. Technical Information......................................................................................21
Product Maintenance........................................................................................................21
Troubleshooting Guide........................................................Error! Bookmark not defined.
Returns Procedure............................................................................................................22
Contact Us ..........................................................................Error! Bookmark not defined.
Technical Specifications ...................................................................................................23

Before You Begin
COLORado™ Batten 72 Tour User Manual Rev. 4 -1-
1. Before You Begin
What Is
Included
•COLORado™ Batten 72 Tour
•Neutrik® powerCON® power cord
•Safety Cable
•Warranty Card
•Quick Reference Guide
Unpacking
Instructions
Immediately upon receiving this product, carefully unpack the items and inspect the box.
Make sure you have received all the parts in good condition.
Claims
If the box or contents (the product and
included accessories) appear damaged from
shipping, or show signs of mishandling, notify the carrier immediately upon receipt
, not
CHAUVET®. Failure to notify the carrier in a timely manner may invalidate your claim
. In
addition, keep the container and all the packing material for inspection.
For other issues such as missing components or parts, damage not related to shipping, or
concealed damage, file a claim with CHAUVET®
within seven (7) days of receiving the
merchandise.
Typographic
Conventions
Convention
Meaning
1~512
A range of values in the text
50/60
A set of mutually exclusive values in the text
Claims
A new term, another document reference, or section or chapter in
this document
<SET>
A button on the product’s control panel
Settings
A product function or a menu option
MENU > Settings
A sequence of menu options
1~10
A range of menu values from which to choose in a menu
Yes/No
A set of two mutually exclusive menu options in a menu
ON
A unique value to be entered or selected in a menu
Icons
Icon Meaning
Critical installation, configuration, or operation information. Failure
to comply with this information may render the product partially or
completely inoperative, damage third-party equipment, or cause
harm to the user.
Important installation or configuration information. Failure to
comply with this information may prevent the product from
functioning correctly.
Useful information.

Before You Begin
-2- COLORado™ Batten 72 Tour User Manual Rev. 4
Safety Notes
Read all the following Safety Notes before working with this product. These notes include
important information about the installation, usage, and maintenance of this product.
There are no user-serviceable parts in this product. Any reference to servicing in
this User Manual applies only to properly certified CHAUVET® technicians. Do not
open the housing or attempt any repairs unless you are certified by CHAUVET®.
Abide by all applicable local codes and regulations for proper installation of this
product.
•Avoid direct eye exposure to the light source while the product is on.
•Always disconnect this product from its power source before servicing.
•Always connect this product to a grounded circuit to avoid the risk of electrocution.
•Do not touch this product’s housing during operation because it may be very hot.
•This product is for indoor use only! To prevent risk of fire or shock, do not expose this
product to rain or moisture.
•Make sure there are no flammable materials close to this product while it is operating.
•When hanging this product, always secure to a fastening device using a safety cable
(included).
•Always make sure you are connecting this product to the proper voltage in accordance
with the specifications in this manual or on the product’s specification label.
•Never connect this product to a dimmer pack or rheostat.
•Never disconnect this product by pulling or tugging on the power cable.
•Do not operate this product if you see damage on the housing, lenses, or cables. Have
the damaged parts replaced by an authorized technician at once.
•Do not cover the ventilation slots when operating to avoid internal overheating.
•The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at a
higher temperature.
•In case of a serious operating problem, stop using this product immediately!
In the unlikely event that your CHAUVET® product may require service, contact
CHAUVET® Technical Support.
Expected LED
Lifespan
LEDs gradually decline in brightness over time, mostly because of heat. Packaged in
clusters, LEDs exhibit higher operating temperatures than in ideal, single-LED conditions.
For this reason, using clustered LEDs at their fullest intensity significantly reduces the
LEDs’ lifespan. Under normal conditions, this lifespan can be 40,000 to 50,000 hours. If
extending this lifespan is vital, lower the operating temperature by improving the
ventilation around the product and reducing the ambient temperature
to an optimal
operating range. In addition, limiting the overall projection intensity may also help to
extend the LEDs’ lifespan.

Introduction
COLORado™ Batten 72 Tour User Manual Rev. 4 -3-
2. Introduction
Product
Description
The COLORado™ Batten 72 Tour is an RGBWA linear LED wash light. It consists of a
single module that accommodates the internal power supply, the main control, the control
panel, the LED drivers, the LED boards and lenses as well as the power and signal
connectors.
The product features two adjustable mounting brackets that double as floor mounts and
hanging brackets.
Features
•3, 4, 5, 6, 7, 9, 12, 15, or 18-channel RGBWA LED linear wash light
•Operating modes:
3-channel: HSV control
3-channel: RGB control
4-channel: RGB, dimmer
5-channel: RGBWA
6-channel: RGBWA, dimmer
7-channel: RGBWA, dimmer, strobe
9-channel: RGB control per block
12-channel: RGBWA, dimmer, dimmer speed, strobe, macro, auto/custom, and
module select
15-channel: RGBWA control per block
18-channel: 16-bit RGBWA, dimmer, strobe, color macro, auto/custom, dimmer
speed, auto speed
•Built-in automated programs via DMX
•Recall custom programs via DMX
•
RGBWA color mixing with or without DMX control
Additional
Features
•Five distinct dimming curves
•Additional power output: max 11 products @ 120 V
•Neutrik® powerCON® connectors
•3- and 5-pin DMX input and output connectors
•LCD display with password protection
•
Adjustable double-bracketed yoke for floor or overhead mounting

Introduction
-4- COLORado™ Batten 72 Tour User Manual Rev. 4
Product Overview
Control Panel
Fuse
5-Pin DMX In/Out
3-Pin DMX In/Out
Safety Eye Bolt
Power Out
Power In

Setup
COLORado™ Batten 72 Tour User Manual Rev. 4 -5-
3. Setup
AC Power
The COLORado™ Batten 72 Tour has an auto-ranging power supply that works
with an
input voltage range of 100~240 VAC, 50/60 Hz.
Make sure that you are connecting this product to the proper voltage.
To determine the
power requirements for the COLORado™ Batten 72 Tour
, refer to the specification label
affixed to the product or the specifications in this manual.
Refer to the Technical Specifications chart.
Always connect this product to a protected circuit with an appropriate electrical
ground to avoid the risk of electrocution or fire.
The listed current rating indicates the maximum current draw during normal operation. For
more information, download Sizing Circuit Breakers from the CHAUVET® website
:
www.chauvetpro.com.
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even if
the rheostat or dimmer channel serves only as a 0% to 100% switch.
AC Plug
The COLORado™ Batten 72 Tour
comes with a power input cord terminated with a
Neutrik® powerCON® A connector on one end and
an Edison plug on the other end
(U.S. market). If the power input cord that came with your product has no plug, or if
you
need to change the Edison plug, use the table below to wire the new plug.
Connection
Wire (U.S.)
Wire (Europe)
IPXX Pin
Screw Color
AC Live Black Brown 1 Yellow or Brass
AC Neutral White Blue 2 Silver
AC Ground Green/Yellow Green/Yellow 3 Green
Power Linking
The COLORado™ Batten 72 Tour supports power linking. You can power link up to
11 products at 120 VAC,19 products at 208 VAC, or 21 products at 230 VAC.
This product comes with a power input cord. This product does not come with
a power
linking cable; however, a power linking cable is available as an option.
Fuse Replacement
1. Disconnect this product from the power outlet.
2. Using a Phillips #2 head screwdriver, unscrew the fuse
holder cap from the housing.
3. Remove the blown fuse and replace with a good fuse of
the same type and rating.
4. Screw the fuse holder cap back in place and reconnect
power.

Setup
-6- COLORado™ Batten 72 Tour User Manual Rev. 4
DMX Linking
You can link the COLORado™ Batten 72 Tour to a DMX controller using a standard DMX
serial connection. If using other DMX compatible products with the COLORado™ Batten 72
Tour, you can control each individually with a single DMX controller.
DMX Modes
The COLORado™ Batten 72 Tour uses the standard DMX data connection for the TR16,
TOUR, BLOCK1, BLOCK2, ARC1, ARC1 +D, ARC2, ARC2 + D, ARC2 + S, and HSV
DMX modes.
Refer to the Introduction chapter for a brief description of these modes.
Refer to the Operation chapter to learn how to configure the COLORado™ Batten 72 Tour
to work in these modes.
The DMX Values section provides detailed information regarding the DMX modes.
Master/Slave
Connectivity
The Master/Slave mode allows a master COLORado™ Batten 72 Tour set to Master mode
to control one or more COLORado™ Batten 72 Tours set to Slave mode
without a DMX
controller. One COLORado™ Batten 72 Tour becomes the master product when running an
Auto or Custom program, or by being in STATIC mode.
You must configure each slave product’s control panel to operate in SLAVE mode. During
Master/Slave operation, the slave products will operate in unison with the master product.
If you are not familiar with DMX, download the DMX Primer from the CHAUVET® website:
www.chauvetpro.com.
DO NOT connect a DMX controller to products operating in Master/Slave mode. The
DMX controller signals may interfere with the signals from the master product.
The Operation chapter of this manual provides detailed instructions on how to
configure the Master and Slave products.

Setup
COLORado™ Batten 72 Tour User Manual Rev. 4 -7-
Mounting
Before mounting this product, read and follow the Safety Notes in this manual.
Orientation
Always mount this product in a safe position and make sure there is adequate room for
ventilation, configuration, and maintenance.
Rigging
CHAUVET® recommends using the following general guidelines when mounting th
is
product.
•When selecting an installation location, consider easy access to this product for
operation, programming adjustments, and routine maintenance.
•Make sure to mount this product away from any flammable material as indicated in the
Safety Notes.
•Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
•If hanging this product, make sure that the mounting location can support the product’s
weight. Refer to the Technical Specifications chart for the weight-bearing requirements
of this product.
•When hanging this product, always secure to a fastening device using a safety
chain/cable (not included).
The COLORado™ Batten 72 Tour comes with two adjustable feet that double as hanging
bracket to which you can attach clamps. These brackets also serve as floor stands or wall-
mount supports. You must supply your own clamps and make sure the clamps are capable
of supporting the weight of this product. You must use two mounting points per product.
Mounting Diagram
Overhead Mounting
Floor Mounting

Operation
-8- COLORado™ Batten 72 Tour User Manual Rev. 4
4. Operation
Control Panel
Description
Button Function
<MENU> Exits from the current menu or function
<ENTER> Enables the currently displayed menu or
sets the currently selected value in to the
current function
<UP> Navigates upward through the menu list and
increases the numeric value when in a
function
<DOWN> Navigates downward through the menu list
and decreases the numeric value when in a
function
Control Options
You can set the COLORado™ Batten 72 Tour start address in the 001~512 DMX range.
This enables control of up to 28 products in the 18-channel TR16 personality.
Programming
Refer to the Menu Map to understand the menu options. The menu map shows the main
level and a variable number of programming levels for each option.
•To go to the desired main level, press <MENU> repeatedly until the option shows on
the display. Press <ENTER> to select. This will take you to the first programming level
for that option.
•To select an option or value within the current programming level, press <UP> or
<DOWN> until the option shows on the display. Press <ENTER> to select. In this
case, if there is another programming level, you will see that first option, or you will see
the selected value.
•Press <MENU> repeatedly to exit to the previous main level,.
DMX Personality
This setting allows you to choose a particular DMX personality.
1. Go to the PERS main level.
2. Select the desired personality (TR16, TOUR, ARC1, ARC1 + D, ARC2, ARC2 + D,
ARC2 + S, HSV, BLOCK1, or BLOCK2).
•See the DMX Values section for the highest starting address you can select for
each personality.
•Make sure that the starting addresses on the various products do not overlap
due to the new personality setting.

Operation
COLORado™ Batten 72 Tour User Manual Rev. 4 -9-
DMX Control
In this mode, each product
will respond to a unique starting address from the DMX
controller. All products with the same starting address will respond in unison.
1. Set the running mode:
a. Go to the RUN main level.
b. Select the DMX programming level.
2. Set the starting address:
a. Go to ADDRESS.
b. Select the starting address (001~512).
The highest recommended starting address for each DMX mode are as follows:
DMX Mode DMX Address DMX Mode DMX Address DMX Mode DMX Address
TOUR
501
ARC2
508
HSV
510
ARC1
510
ARC2+D
507
BLOCK1
504
ARC1+D
509
ARC2+S
506
BLOCK2
498
TR16
495
Static Color
The Static Color mode allows for permanent RGBWA color mixing without a DMX
controller.
1. Go to the STATIC main level.
2. Select the desired color (RED, GREN, BLUE, WHIT, or AMBE).
3. Select the desired color value (000~255).
4. Repeat for the other colors.
5. Select STRB.
6. Select the desired frequency (00~20).
Auto Programs
Auto programs allow for dynamic RGBWA color mixing without a DMX controller.
1. Go to AUTO.
2. Select the desired auto (AUTO 01~10)or custom program (CUSTOM 01~10).
You cannot edit any of the auto programs (AUTO 01~10). However, you can edit the
custom programs (CUSTOM 01~10). See Edit Customs below for details.
Edit Customs
This setting allows the programming of up to 30 scenes for each of the 10 customizable
programs, including colors and effects.
1. Go to the EDIT main level.
2. Select the desired auto program (CUSTOM 01~10).
3. Select the desired scene (SCENE 01~30).
4. Select the desired color or effect (RED, GREN, BLUE, WHIT, AMBE, STRB, TIME, or
FADE).
5. Select the color or effect value (000~255 for colors and timers, or 00~20 for strobe).
6. Repeat for the other colors or effects.
7. Return to the SCENE level (step “3”).
8. Repeat the settings of colors and effects for the other scenes.

Operation
-10- COLORado™ Batten 72 Tour User Manual Rev. 4
Master/Slave
The Master/Slave mode allows a group of COLORado™ Batten 72 Tours (the slave
products) to simultaneously duplicate the output of another COLORado™ Batten 72 Tour
(the master product) without a DMX controller.
1. Set each of the slave products:
a. Go to RUN.
b. Select SLAVE.
2. Set the master product:
a. Set the running mode to DMX as explained in DMX Control.
b. Select an auto or custom program as explained in Auto Programs, or a static mix
of colors.
•The master product is the one that runs a program (whether Auto or Custom) or
Static Color mode.
•Do not connect a DMX controller to the products configured for Master/Slave
operation. The DMX controller may interfere with signals from the master.
•The master product should be the first product in the daisy chain.
Color Settings
The COLOR setting determines how the COLORado™ Batten 72 Tour
generates the
white color based on various RGB settings.
1. Go to the SETTINGS main level.
2. Select COLOR.
3. Select OFF, RGB TO W, or UC.
OFF: When all the RGB faders are set to 255, the output is maximum, although
the resulting white color may not be balanced.
RGB TO W: When all the RGB faders are set to 255, the resulting output is defined by
the configured White color (see Whites Settings).
UC: When all the RGB faders are set to 255, the output matches that of less
efficient products (Universal Color).
Dimmer Curves
This setting determines how fast the output of the COLORado™ Batten 72 Tour changes
when you modify the values of the Red, Green, Blue, White, Amber, and Dimmer faders.
This setting provides
four different options to simulate the dimming curve of an
incandescent lighting product.
1. Go to the SETTINGS main level.
2. Select DIMMER.
3. Select a dimmer function (OFF, DIM1, DIM2, DIM3, or DIM4).
OFF: The output is proportional (linear) to the Dimmer and RGBWA channel
values.
DIM1~4: The output follows the Dimmer and RGBWA channel values based on the
corresponding dimmer curve, being DIM1 the fastest and DIM4 the slowest.

Operation
COLORado™ Batten 72 Tour User Manual Rev. 4 -11-
Control Panel
Lock
This setting enables you to activate or disable the control panel lock, which keeps non-
authorized personnel from changing the product’s settings.
1. Go to the KEYLOCK main level.
2. Select ON or OFF.
When the control panel lock is active, the product will prompt you to enter the
password after 30 seconds of control panel inactivity or after turning on the product.
After being prompted to enter the password:
Press <UP>, <DOWN>, <UP>, <DOWN>, <ENTER>
Program Upload
This option allows you to copy the custom programs of one COLORado™ Batten 72 Tour
onto other COLORado™ Batten 72 Tours by using the Master/Slave mode.
1. Configure and connect the products in a Master/Slave arrangement, where the master
product has the custom programs you want to transfer to the slave products.
2. From the master product, go to the SETTINGS main level.
3. Select UPLOAD, press <ENTER>.
4. When PASSWORD shows, enter the master access password as shown in Control
Panel Lock.
5. When SEND shows, press <ENTER> to start the upload.
6. Wait for the upload process to finish (the display will show END/MAIN) before
continuing or turning the products off.
The Master/Slave products will provide the status of the process by lighting up as
follows:
•Yellow indicates that the upload process is running.
•Green indicates that the upload process completed successfully.
•
Red indicates that the upload process failed due to an error. Recheck all cable
connections and restart the process. If the issue persists, contact CHAUVET®
Technical Support.
DO NOT upload the data from a COLORado™ Batten 72 Tour to a different product.
The other product may become inoperative.
Reset
This setting allows you to reset the COLORado™ Batten 72 Tour to the
default values,
including the custom programs.
1. Go to the SETTINGS main level.
2. Select RESET.
3. When PASS shows, press <ENTER>.
4. Enter the master access password as described in Control Panel Lock.
5. Wait for the reset process to finish.

Operation
-12- COLORado™ Batten 72 Tour User Manual Rev. 4
Whites Setting
This setting allows you
to select and edit the temperature of the white colors used in
channel 7 (Macros) when in the TOUR mode and channel 13 when in the TR16 mode.
You
can also define the maximum RGB values when RGB to White (RGB to W) is active.
1. Go to CALIB.
2. Select a white color (WHITE1~11)or (RGB TO W).
a. Select RED, GREN, BLUE, WHIT, or AMBE for WHITE1~11.
b. Select RED, GREN, or BLUE for RGB TO W.
3. Select a color value (000~255).
4. Repeat for the other colors.
When selecting RGB TO W, you will only be able to define the values of RED, GREN
(green), and BLUE.
The values of RED, GREN, and BLUE configured from CALIB > RGB TO W will define
the color temperature shown when the RGB faders are set to 255 if SETTING >
COLOR > RGB TO W is active.
Fan Setting
1. Press <MENU> repeatedly until FANS shows, and press <ENTER> to accept.
2. Use <UP> or <DOWN> to select a setting (OFF, LOW, NORMAL, HIGH, or AUTO).
3. Press <MENU> to exit once done.
•When in AUTO, the fan speed automatically changes so the product’s
temperature does not exceed the maximum allowed value.
•When in the other settings, the fan speed follows the predefined values.
•The internal controller will override any manual setting if
the internal
temperature rises above a certain level.

Operation
COLORado™ Batten 72 Tour User Manual Rev. 4 -13-
Menu Map
Main Level
Programming Levels
Description
STATIC
RED :
000–255 Combines red, green, blue, white and amber to
make a custom color
GREN:
BLUE:
WHIT:
AMBE:
STRB: 00–20 Selects the strobe frequency
(0–20 Hz)
AUTO AUTO 01–10 10 automatic programs
CUSTOM 10 customizable programs
RUN DMX DMX mode
SLAVE Master/Slave mode
ADDRESS 001–512 Selects the DMX starting address
PERSON
TOUR 12-channel: RGBWA, dimmer, strobe, color macro,
auto/custom, dimmer speed, auto speed
TR16 18-channel: 16-bit RGBWA, dimmer, strobe, color
macro, auto/custom, dimmer speed, auto speed
BLOCK1 9-channel: RGB per block
BLOCK2 15-channel: RGBWA per block
ARC1 3-channel: RGB control
ARC1+D 4-channel: RGB, dimmer
ARC2 5-channel: RGBWA control
ARC2+D 6-channel: RGBWA, dimmer
ARC2+S 7-channel: RGBWA, dimmer, strobe
HSV 3-channel: HSV control
EDIT CU
ST
OM
01–
10
S
C
E
N
E
01–
30
RED :
000–255 Combine red, green, blue, white, and amber to
generate a custom color
(0–100%)
GREN:
BLUE:
WHIT:
AMBE:
STRB: 00–20 Selects the strobe frequency
(0–20 Hz)
TIME:
000–255
Defines the step duration
(slow to fast)
FADE: Defines the fade duration
(slow to fast)

Operation
-14- COLORado™ Batten 72 Tour User Manual Rev. 4
Main Level
Programming Levels
Description
SETTINGS
UPLOAD
PASSWORD
….
(Enter Passcode)
Uploads custom programs to other COLORado™
Batten 72 Tour products
RESET
PASSWORD
….
(Enter Passcode)
Defaults product to factory settings
COLOR
OFF RGB set to 255 = max. output
RGB TO W RGB set to 255 = balanced white
UC. Universal color balance
DIMMER
OFF No dimmer
DIM1.
Dimmer fast (DIM1) to slow (DIM4)
DIM2.
DIM3.
DIM4.
CURV
OFF No dimmer
CURV1
Fast (CURV1) to slow (CURV3) dimmer curves
CURV2
CURV3
KEY
ON
Turns the passcode on or off
OFF
CALIB PASSWORD
….
(Enter Passcode)
CAL1 WHITE
01–11
RED :
000–
255
Modifies the color macros used in the TOUR and
TR16 personalities
GREN:
BLUE:
WHIT:
AMBE:
CAL2
RED :
Defines the color temperature used when COLOR is
set to RGB TO W
GREN:
BLUE:
CALR
PASSWORD
….
(Enter Passcode)
Defaults CALIB to factory settings
FANS
OFF
Selects the fan speed
LOW
NORMAL
HIGH
AUTO

Operation
COLORado™ Batten 72 Tour User Manual Rev. 4 -15-
DMX Values
TOUR
Channel Function Value Percent/Setting
1
Master Dimmer
000 ó255
000~100%
2
Red
000 ó255
000~100%
3
Green
000 ó255
000~100%
4
Blue
000 ó255
000~100%
5
White
000 ó255
000~100%
6
Amber
000 ó255
000~100%
7 Color Macro + White
Balance
000 ó010
011 ó030
031 ó050
051 ó070
071 ó090
091 ó110
111 ó130
131 ó150
151 ó170
171 ó200
201 ó205
206 ó210
211 ó215
216 ó220
221 ó225
226 ó230
231 ó235
236 ó240
241 ó245
246 ó250
251
ó
255
No Function
R: 100% G: 0~100% B: 0%
R: 100~0% G: 100% B: 0%
R: 0% G: 100% B: 0~100%
R: 0% G: 100~0% B: 100%
R: 0~100% G: 0% B: 100%
R: 100% G: 0% B: 100~0%
R: 100% G: 0~100% B: 0~100%
R: 100~0% G: 100~0% B: 100%
RGBWA: 100%
White 1
White 2
White 3
White 4
White 5
White 6
White 7
White 8
White 9
White 10
White 11
8 Strobe
000
ó
009
010 ó255
No function
01~20 Hz
Continues on next page

Operation
-16- COLORado™ Batten 72 Tour User Manual Rev. 4
TOUR
(Cont.)
Channel Function Value Percent/Setting
9 Auto + Custom
Programs
000 ó040
041 ó050
051 ó060
061 ó070
071 ó080
081 ó090
091 ó100
101 ó110
111 ó120
121 ó130
131 ó140
141 ó150
151 ó160
161 ó170
171 ó180
181 ó190
191 ó200
201 ó210
211 ó220
221 ó230
231 ó255
No Function
Auto 1
Auto 2
Auto 3
Auto 4
Auto 5
Auto 6
Auto 7
Auto 8
Auto 9
Auto 10
Custom 1
Custom 2
Custom 3
Custom 4
Custom 5
Custom 6
Custom 7
Custom 8
Custom 9
Custom 10
10
Auto Speed
000 ó255
000~100%
11 Dim Speed
000 ó009
010 ó029
030 ó069
070 ó129
130 ó189
190 ó255
Dimmer speed as per Control Panel
Linear dimmer
Non-linear dimmer 1 (fastest)
Non-linear dimmer 2
Non-linear dimmer 3
Non-linear dimmer 4 (slowest)
12 Module Select
000 ó004
005 ó034
035 ó064
065 ó094
095 ó124
125 ó154
155 ó184
185 ó214
215 ó255
Blocks 1, 2 & 3
Block 1
Block 2
Block 3
Blocks 1 & 2
Blocks 2 & 3
Blocks 1 & 3
Blocks 1, 2 & 3
No Function