Chauvet eclipse User manual

LASER LIGHT
AVOID DIRECT EYE EXPOSURE
CLASS 3R LASER PRODUCT
CLASSIFIED PER EN/IEC 60825-1:2007
Complies with FDA performance standards
for laser products except for deviations
pursuant to Laser Notice No. 50, dated
June 24
,
2007.

Eclipse™ User Manual 2 8/18/2011
TABLE OF CONTENTS
1. BEFORE YOU BEGIN...............................................................................................................................................3
WHAT IS INCLUDED.................................................................................................................................................................................................3
UNPACKING INSTRUCTIONS......................................................................................................................................................................................3
CLAIMS................................................................................................................................................................................................................3
MANUAL CONVENTIONS ...................................................................................................................................................................................3
ICONS..................................................................................................................................................................................................................3
SAFETY INSTRUCTIONS ....................................................................................................................................................................................4
NON INTERLOCKED HOUSING WARNING.......................................................................................................................................................5
LASER SAFETY NOTES.....................................................................................................................................................................................5
LASER SAFETY LABEL REPRODUCTION.....................................................................................................................................................................6
LASER EMISSION DATA............................................................................................................................................................................................7
LASER COMPLIANCE STATEMENT .............................................................................................................................................................................7
2. INTRODUCTION........................................................................................................................................................8
PRODUCT OVERVIEW ..............................................................................................................................................................................................8
PRODUCT DIMENSIONS............................................................................................................................................................................................8
3. SETUP.....................................................................................................................................................................10
ACPOWER ..........................................................................................................................................................................................................10
MOUNTING ...........................................................................................................................................................................................................10
Orientation ...................................................................................................................................................................................10
Rigging.........................................................................................................................................................................................10
PROPER USAGE....................................................................................................................................................................................................11
4. OPERATING INSTRUCTIONS................................................................................................................................12
GENERAL TROUBLESHOOTING................................................................................................................................................................................13
RETURNS PROCEDURE..........................................................................................................................................................................................13
CONTACTINFORMATION.......................................................................................................................................................................................13
TECHNICAL SPECIFICATIONS..................................................................................................................................................................................14
Contact Information
WorldHeadquartersUnitedKingdom&Ireland
CHAUVET®CHAUVET®EuropeLtd.
GeneralInformation
Address:5200NW108thAvenue
Sunrise,FL33351
Voice: (954)929‐1115
Fax: (954)929‐5560
Tollfree: (800)762‐1084
TechnicalSupport
Voice: (954)929‐1115(Press4)
Fax: (954)756‐8015
GeneralInformation
Address: Unit1C
BrookhillRoad
Pinxton,Nottingham,UK
NG166NT
Voice: +44(0)1773511115
Fax: +44(0)1773511110
Email:[email protected]

WorldWideWeb:www.chauvetlighting.com WorldWideWeb:www.chauvetlighting.co.uk

Eclipse™ User Manual 3 8/18/2011
1.BEFORE YOU BEGIN
What Is Included
1 x Eclipse™
1 x Power cable
1 x Warranty Card
1 x User Manual
Unpacking Instructions
Immediately upon receipt, carefully unpack this product and check the container to make sure you
have received all the parts indicated above in good condition.
Claims
If the container or the material inside the container (this product and any other accessory
included) appears damaged from shipping, or shows signs of mishandling, notify the carrier
immediately, not CHAUVET®, upon receipt of the damaged merchandise. Failure to do so in
a timely manner may invalidate your claim with the carrier. In addition, retain the container
and all the packing material for inspection.
For other issues such as missing components or parts, damage not related to shipping, or
concealed damage, file a claim with CHAUVET® within seven (7) days of receiving the
merchandise.
Manual Conventions
CHAUVET® manuals use the following conventions to differentiate certain types of
information from the regular text.
Convention MEANING
<Menu> A key to be pressed on the product’s control panel
1~512 A range of values
50/60 A set of values of which only one can be chosen
Settings A menu option not to be modified (for example, showing the
operating mode/current status)
MENU >
Settings A sequence of menu options to be followed
ON A value to be entered or selected
Icons
This manual uses the following icons to indicate information that requires special attention
on the part of the user.
Icons MEANING
This paragraph contains critical installation, configuration or
operation information. Failure to comply with this information
may render the product partially or completely inoperative,
cause damage to the product or cause harm to the user.
This paragraph contains important installation or configuration
information. Failure to comply with this information may
prevent the product from functioning correctly.
This paragraph reminds you of useful, although not critical,
information.

Eclipse™ User Manual 4 8/18/2011
Safety Instructions
Please read the following notes carefully because they include important safety
information about the installation, usage, and maintenance of this product.
Keep this User Manual for future consultation. If you sell this product to another user,
be sure that they also receive this document.
Always make sure that the voltage of the outlet to which you are connecting this
product is within the range stated on the decal or rear panel of the product.
This product is for indoor use only! To prevent risk of fire or shock, do not expose this
product to rain or moisture.
Make sure there are no flammable materials close to the unit while operating.
Always install this product in a location with adequate ventilation, at least 20 in (50
cm) from adjacent surfaces. Be sure that no ventilation slots are blocked.
Always disconnect this product from the power source before cleaning it or replacing
fuse.
Make sure to replace the fuse with another of the same type and rating.
If mounting it overhead, always secure this product to a fastening device using a
safety chain.
The maximum ambient temperature (Ta) is 104° F (40° C). Do not operate this
product at higher temperatures.
In the event of a serious operating problem, stop using the unit immediately. Never
try to repair the unit. Repairs carried out by unskilled people can lead to damage or
malfunction. Please contact the nearest authorized technical assistance center.
Never connect this product to a dimmer pack.
Make sure the power cord is not crimped or damaged.
Never disconnect the power cord by pulling or tugging on the cord.
Never carry a product from the power cord or any moving part. Always use the
hanging/mounting bracket or the handles.
Always avoid direct eye exposure to the light source when this product is on.
Lasers can be hazardous and have unique safety considerations. Permanent eye
injury and blindness is possible if lasers are used incorrectly. Pay close attention to
each safety REMARK and WARNING statement in this user manual. Read all
instructions carefully BEFORE operating this device.
Avoid direct eye contact with laser light. Never intentionally expose your eyes or
others to direct laser light.
This laser product can potentially cause instant eye injury or blindness if laser
light directly strikes the eyes.
It is illegal and dangerous to shine this laser into audience areas, where the
audience or other personnel could get direct laser beams or bright reflections
into their eyes.
It is a US Federal offense to shine any laser at aircraft.
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
There are no user serviceable parts inside the unit. Do not open the housing or
attempt any repairs yourself. In the unlikely event your unit may require service,
please contact the dealer nearest to you.
Avoid direct eye contact with laser light. Never intentionally expose your eyes or
others to direct laser light.

Eclipse™ User Manual 5 8/18/2011
Non Interlocked Housing Warning
This unit contains high power laser devices internally.
Do not open the laser housing, due to potential exposure to unsafe levels of laser
radiation.
The laser power levels, accessible if the unit is opened, can cause instant blindness,
skin burns, and fires.
Laser Safety Notes
STOP AND READ ALL THE LASER SAFETY NOTES BELOW
Laser Light is different from any other light sources with which you may be familiar. The light
from this product can potentially cause eye injury if not set up and used properly. Laser light
is thousands of times more concentrated than light from any other kind of light source. This
concentration of light can cause instant eye injuries, primarily by burning the retina (the light
sensitive portion at the back of the eye). Even if you cannot feel “heat” from a laser beam, it
can still potentially injure or blind you or your audience. Even very small amounts of laser light
are potentially hazardous even at long distances. Laser eye injuries can happen quicker than
you can blink.
It is incorrect to think that because these laser entertainment products split the laser into
hundreds of beams that the laser beam is scanned out in high speed, that an individual laser
beam is safe for eye exposure. This laser product uses dozens of milliwatts of laser power
(Class 3B levels internally) before it splits into multiple beams (Class 3R levels). Many of the
individual beams are potentially hazardous to the eyes.
It is also incorrect to assume that because the laser light is moving, it is safe. This is not true.
Nor, do the laser beams always move. Since eye injuries can occur instantly, it is critical to
prevent the possibility of any direct eye exposure. In the laser safety regulation, it is not legal
to aim Class 3R lasers in areas which people can get exposed. This is true even if it is aimed
below people’s faces, such as on a dance floor.
Do not operate the laser without first reading and understanding all safety and technical
data in this manual.
Always set up and install all laser effects so that all laser light is at least 3 meters (9.8
feet) above the floor on which people can stand. See “Proper Usage” section later in this
manual.
After set up, and prior to public use, test laser to ensure proper function. Do not use if
any defect is detected. Do not use if laser emits only one or two laser beams rather than
dozens/hundreds, as this could indicate damage to the diffraction grating optic, and
could allow emission of higher laser levels above Class 3R.
Do not point lasers at people or animals.
Never look into the laser aperture or laser beams.
Do not point lasers in areas in which people can potentially get exposed, such as
uncontrolled balconies, etc.
Do not point lasers at highly reflective surfaces, such as windows, mirrors and shiny
metal. Even laser reflections can be hazardous.
Never point a laser at aircraft, this is a federal offense.
Never point un-terminated laser beams into the sky.
Do not expose the output optic (aperture) to cleaning chemicals.
Do not use laser if the laser appears to be emitting only one or two beams.
Do not use the laser if the housing is damaged, open, or if the optics appear damaged in
any way.
Never open the laser housing. The high laser power levels inside of the protective
housing can start fires, burn skin and will cause instant eye injury.
Never leave this device running unattended.
The operation of a class 3R laser show is only allowed if the show is controlled by a
skilled and well-trained operator, familiar with the data included in this manual.
The legal requirements for using laser entertainment products vary from country to
country. The user is responsible for the legal requirements at the location/country of use.
Always use appropriate lighting safety cables when hanging lights and effects overhead.

Eclipse™ User Manual 6 8/18/2011
Laser Safety Label Reproduction
LASER HAZARD
WARNING LABEL
LASER APERTURE LABEL
EXPLANATORY,
MANUFACTURER’S ID &
CERTIFICATION LABEL
NON INTERLOCKED
HOUSING LABEL

Eclipse™ User Manual 7 8/18/2011
Laser light - Avoid direct eye contact!
Further guidelines and safety programs for safe use of lasers can be found in the ANSI
Z136.1 Standard “For Safe Use of Lasers”, available from the Laser Institute of America:
www.laserinstitute.org. Many local governments, corporations, agencies, military and
others, require all lasers to be used under the guidelines of ANSI Z136.1. Laser Display
guidance can be obtained via the International Laser Display Association:
www.laserist.org.
Laser Emission Data
Laser Classification Class 3R
Green Laser Medium DPSS Nd:YVO4, 532nm
Red Laser Medium LD GaAlAs 650nm, typical
Beam Diameter <5mm at aperture
Pulse Data All pulses < 4Hz (>0.25sec)
Divergence (each beam) <2 mrad
Divergence (total light) <160 degrees
Laser Power of Each
Beam from Aperture* <5mW
*As measured under IEC measurement conditions for classification.
Laser Compliance Statement
This laser product complies with EN/IEC 60825-1 Ed 2, 2007-03, and US FDA/CDRH
FLPPS via the terms of Laser Notice No. 50 dated June 24, 2007. This laser device
is classified 3R. (Class 3R is the international equivalent of US Class IIIa). No
maintenance is required to keep this product in compliance with laser performance
standards.
LASER EXPOSURE

Eclipse™ User Manual 8 8/18/2011
2.INTRODUCTION
Product Overview
Bracket
adjustment
knob
(
1 of 2
)
LED output
Laser Aperture

Eclipse™ User Manual 9 8/18/2011
Product Dimensions

Eclipse™ User Manual 10 8/18/2011
Hanging Clamp
Note!
Clamp is sold separatel
y
.
3.SETUP
AC Power
This product has an auto-switching power supply that can accommodate a wide range of input
voltages. The only thing necessary to do before powering on the unit is to make sure the line
voltage you are applying is within the range of accepted voltages. This product will accommodate
between 100V and 240V AC 50-60 Hz. All products must be powered directly off a switched circuit
and cannot be run off a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer
channel is used solely for a 0% to 100% switch.
Mounting
Orientation This product may be mounted in any safe position, provided there is adequate room for ventilation.
Rigging It is important never to obstruct the fan or vents pathway. Mount the product using, a suitable “C” or
“O” type clamp. Adjust the angle of the product by loosening both knobs and tilting the product.
After finding the desired position, retighten both knobs.
When selecting installation location, take into consideration access and routine maintenance.
Safety cables must always be used.
Never mount in places where the product will be exposed to rain, high humidity, extreme
temperature changes or restricted ventilation.

Eclipse™ User Manual 11 8/18/2011
Proper Usage

This product is for overhead mounting only. For safety purposes, CHAUVET®
recommends mounting your lighting effect products on steady elevated platforms or
sturdy overhead supports using suitable hanging clamps. In all cases, you must use
safety cables. You can obtain appropriate mounting hardware from your lighting
vendor.
International laser safety regulations require that laser products must be operated in
the fashion illustrated below, with a minimum of 3 meters (9.8 ft) of vertical separation
between the floor and the lowest laser light vertically. Additionally, 3 meters of
horizontal separation is required between laser light and audience or other public
spaces.








CAUTION - USE OF CONTROLS OR
A
DJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE

Eclipse™ User Manual 12 8/18/2011
4.OPERATING INSTRUCTIONS
CONTROL FUNCTION
DESCRIPTION
Laser rotation button Push in = rotate counterclockwise
Push out = rotate clockwise
Laser rotation speed knob Turn clockwise to increase the rotation of
the laser effect
Laser red strobe knob Turn clockwise to increase the strobe
speed of the red laser from slow to full on
Laser green strobe knob Turn clockwise to increase the strobe
speed of the green laser from slow to full
on
LED rotation button Push in = rotate counterclockwise
Push out = rotate clockwise
LED rotation speed knob Turn clockwise to increase the rotation
speed of the deep blue LED effect from
static to full speed
LED brightness knob Turn clockwise to increase the intensity of
the deep blue LED effect from off to full on
The lasers cannot be turned off. They can be set to a slow strobe.
At higher rotation speeds, the operation noise may increase from the product.
This is normal.

Eclipse™ User Manual 13 8/18/2011
General Troubleshooting
Symptom Solution(s)
Applies to
Lights Foggers & Snow Controllers Dimmers & Chaser
Breaker/Fuse keeps
blowing Check total load placed on device 
Chase is too slow Check users manual for speed adjustment 
Device has no power Check for power on Mains.
Check device’s fuse. (internal and/or external) 
Loss of signal Use only DMX cables
Install terminator
Note: Keep DMX cables separated from power cables
or black lights.

No laser output Bounce mirror motor may have shifted during shipping;
readjust 
If you still have a problem after trying the above solutions, please contact CHAUVET Technical Support.
Returns Procedure
Returned merchandise must be sent prepaid and in the original packing, call tags will not be
issued. Package must be clearly labeled with a Return Merchandise Authorization Number (RMA
#). Products returned without an RMA # will be refused. Call CHAUVET and request RMA # prior to
shipping the product. Be prepared to provide the model number, serial number and a brief
description of the cause for the return. Be sure to properly pack product, any shipping damage
resulting from inadequate packaging is the customer’s responsibility. CHAUVET reserves the right
to use its own discretion to repair or replace product(s). As a suggestion, proper UPS packing or
double-boxing is always a safe method to use.
Note: If you are given an RMA #, please include the following information on a piece of
paper inside the box:
1. Your name
2. Your address
3. Your phone number
4. The RMA #
5. A brief description of the symptoms

ContactInformation
WorldHeadquartersUnitedKingdom&Ireland
CHAUVET®CHAUVET®EuropeLtd.
GeneralInformation
Address:5200NW108thAvenue
Sunrise,FL33351
Voice: (954)929‐1115
Fax: (954)929‐5560
Tollfree: (800)762‐1084
TechnicalSupport
Voice: (954)929‐1115(Press4)
Fax: (954)756‐8015
GeneralInformation
Address: Unit1C
BrookhillRoadIndustrialEstate
Pinxton,Nottingham,UK
NG166NT
Voice: +44(0)1773511115
Fax: +44(0)1773511110
Email: [email protected]

WorldWideWeb
www.chauvetlighting.com
WorldWideWeb
www.chauvetlighting.co.uk

Eclipse™ User Manual 14 8/18/2011
Technical Specifications
WEIGHT & DIMENSIONS
Length.............................................................................................................................7.9 in (180 mm)
Width .............................................................................................................................. 9.3 in (236 mm)
Height............................................................................................................................. 6.4 in (163 mm)
Weight ..............................................................................................................................3.6 lbs (1.6 kg)
POWER
Autoswitching power supply................................................................................100-240 VAC 50/60 Hz
Fuse................................................................................................................. T1.5 A 250 V (slow-blow)
Power Consumption..................................................................................... 20 W (0.2 A) max @ 120 V
Inrush Current...................................................................................................................0.1 A @ 120 V
Power Consumption..................................................................................... 18 W (0.1 A) max @ 230 V
Inrush Current...................................................................................................................0.2 A @ 230 V
Power Output........................................................................... 50 units max @ 120 V, 90 units @ 230V
LIGHT SOURCE
LED............................................................................... 5W 1,000 mA (1 deep blue 450 nm) 50,000 hrs
LASER
Green diode.....................................................................................................................532 nm 30 mW
Red diode........................................................................................................................650 nm 80 mW
Laser Type......................................................................................................................................DPSS
Cooling ..................................................................................................................................Fan Cooled
RANGE
Coverage Angle................................................................................................................................120°
THERMAL
Maximum ambient temperature........................................................................................ 104° F (40° C)
ORDERING INFORMATION
Eclipse™ .................................................................................................................................. ECLIPSE
WARRANTY INFORMATION
Warranty..............................................................................................................1-year limited warranty