Chicago Pneumatic CP 1210 Maintenance and service guide

Pneumatic Breakers
for Demolition and Construction
People.
Passion.
Performance.

A pneumatic breaker should be robust and reliable yet easy to use. That’s exactly
what you get with the new generation of CP breakers. These demolition tools deliver
the power and durability you demand for tough jobs including breaking reinforced
concrete, heavy road work, trenching, and cutting tarmac or frozen ground.
CP has taken a proven product and made it even better by making continuous
improvements with the operator in mind. The result is a streamlined, modern design
that delivers the performance and durability you need to get the job done.
The rened line combines a lighter weight with higher impact energy for excellent
productivity. These breakers are also easy and comfortable to operate, with rounded
corners and increased vibration dampening on SVR models. No matter which
model you choose, every breaker in the line is built to provide the best power and
performance in its weight class.

4 Pneumatic Breakers for Demolition and Construction NOTE: Some features are not available on all models
OPERATOR-FRIENDLY DESIGN
Breakers are designed with smooth,
curved lines instead of sharp edges
wherever possible, making them
more comfortable to work with.
BUILT-IN AIR
INLET SWIVEL
Swivelling action also
under pressure — that is
when you actually need
it. Swivels accept both
US and international
standard claw couplings
with 3/4" thread.
Engineered for
High Performance
Chicago Pneumatic construction tools are known for their pioneering design, high-impact technology and
durability. We listen to our customers, watch how the products are used, and never stop working to develop
new features that make our tools more comfortable and efcient on the job.
CHOOSE THE OPTION THAT FITS YOUR NEEDS
CP pneumatic breakers are available in different models and sizes in order to suit a variety of applications.
There is a choice of several different shanks to cater to needs in different markets. You can also choose
from standard breakers, standard breakers with a mufer for noise reduction (S models) and vibration-
reduced breakers with state-of-the-art vibration dampening (SVR models). All S and SVR models comply
with the European Union Noise Directive (2000/14/EC) and are CE-marked.
TUNED VALVE SYSTEM
Gets more power out of
your breaker and increases
productivity.
NEW DURABLE POLYURETHANE
FRONTHEAD SPRINGS
Extend the service life of the
springs and the front head side
bolts, reducing cost.
SEPARATE SHANK BUSHING
The shank bushing is replaceable,
if the need should ever arise.
ADVANCED VIBRATION
REDUCTION SYSTEM
Operator comfort is increased,
so is productivity. Negative
effects of vibrations are
reduced (SVR models).
BETTER VISIBILITY
The streamlined, atter prole
of the breaker gives the
operator a better view of the
work area, and also makes it
easier for the operator to lift
and re-position the tool.
TEASING THROTTLE
Makes starting a cut
easy, even under difcult
conditions.
MORE COMFORTABLE
HANDLES
Operator comfort and tool
control are enhanced.
INTERNAL OILER
The easy-to-ll oiler
keeps your tool in shape.

APPLICATIONS: Tough construction and plant maintenance work
such as breaking reinforced concrete, heavy road work, cutting tarmac,
frozen ground or non-consolidated rock and for general demolition work.
These new 60-pound and 90-pound breakers continue the tradition of
the well-known CP 1230 and CP 1240 with outstanding robustness and
reliability in tough working conditions. Plus, they offer more power and
are lighter weight.
* Also for 28 x 152
** Also for 32 x 152 mm
*** Important: Full details of measurement are available in the Safety and Operating Instructions of the product (Part No. 9800 1351 90). All values at 6 bar. Air inlet thread is
NPTF 3/4". Claw couplings for BSP 3/4" and G 3/4" can also be used on this thread. The breakers are delivered without claw couplings. Please Note: Non-muffled tools are not
CE-marked and must not be sold for use in the EEA (European Economic Area), i.e. EU plus Norway, Iceland and Lichtenstein.
PNEUMATIC BREAKERS CP 1260 CP 1260 S CP 1260 SVR CP 1290 CP 1290 S CP 1290 SVR
Weight kg 29 31 34 37 39 43.5
Length mm 680 680 735 730 730 785
Air Consumption l/s 34.5 34.5 34.5 43 43 43
Blows Per Minute bpm 1,300 1,300 1,300 1,100 1,100 1,100
Vibration Level 3 Axes***
(ISO 20643) m/s220.7 20.7 6.5 18.4 18.4 6.2
Sound Power Level Guaranteed
(I2000/14/EC) dB(A) –110 110 –111 111
Sound Pressure Level
(ISO 11203) dB(A) – 97 97 – 98 98
Air Inlet 3/4" NPTF 3/4" NPTF 3/4" NPTF 3/4" NPTF 3/4" NPTF 3/4" NPTF
Part Number
Chuck: 28 x 160 mm* 8900 0030 29 8900 0030 31 8900 0030 33 8900 0030 38 8900 0030 40 8900 0030 42
Part Number
Chuck: 32 x 160 mm** 8900 0030 28 8900 0030 30 8900 0030 32 8900 0030 37 8900 0030 39 8900 0030 41
CP 1260 and
CP 1290 Breakers
KEY FEATURES:
• Even more power and productivity than the CP 1230 and CP 1240
• Improved modern design for excellent durability
• Four-bolt backhead – withstands rugged use
• Integral oiler – provides continuous lubrication
• Reversible piston – reduces maintenance cost
• New swivel design for increased manoeuvrability
• New type of heavy-duty front head springs – reduce maintenance cost
• “Hushed power” versions equipped with mufers (S-models)
• Versions with improved vibration dampening system (SVR models)
MORE
POWER
LIGHTER
WEIGHT
Pneumatic Breakers for Demolition and Construction 5

CP 1260 and
CP 1290 Spike Drivers
SPIKE DRIVERS CP 1260 S SPDR CP 1290 S SPDR
Weight kg 29.5 38
Length mm 625 660
Air Consumption l/s 34.5 43
Blows Per Minute bpm 1,300 1,100
Vibration Level 3 Axes*
(ISO 20643) m/s220.7 18.4
Sound Power Level Guaranteed
(2000/14/EC) dB(A) 110 111
Sound Pressure Level
(ISO 11203) dB(A) 97 98
Air Inlet 3/4" NPTF 3/4" NPTF
Max Head Diameter mm 44 44
Part Number 8900 0030 34 8900 0030 43
APPLICATIONS: Used for driving spikes in
railroad, construction and plant maintenance
applications and in tent erection.
These specialized spike drivers are built to the same exacting
specications as our heavy duty pneumatic breakers, but with an
open front head without tool retainer.
The opening in the front head accepts a maximum spike head
diameter of 44 mm (1-7/8").
Both models are “Hushed Power” versions equipped with a mufer.
MUFFLER
INCLUDED
HUSHED
POWER
KEY FEATURES:
• Even more power and productivity than the CP 1230 and CP 1240 spike drivers
• Improved modern design for excellent durability
• Four-bolt backhead – withstands rugged use
• Integral oiler – provides continuous lubrication
• Reversible piston – reduces maintenance cost
• New swivel design for increased manoeuvrability
• New type of heavy-duty front head springs – reduce maintenance cost
6 Pneumatic Breakers for Demolition and Construction
*Important: Full details of measurement are available in the Safety and Operating
Instructions of the product (Part No. 9800 1352 90).
All values at 6 bar. Air inlet thread is NPTF 3/4". Claw couplings for BSP 3/4"
and G 3/4" can also be used on this thread. The breakers are delivered without
claw couplings.

PNEUMATIC BREAKERS CP 0117 CP 0117 S
Weight kg 35 36
Length mm 740 740
Air Consumption l/s 35 35
Blows Per Minute bpm 1,080 1,080
Vibration Level 3 Axes***
(ISO 20643) m/s2– 11.9
Sound Power Level Guaranteed
(2000/14/EC) dB(A) – 108
Sound Pressure Level
(ISO 11203) dB(A) – 95
Air Inlet 3/4" NPTF 3/4" NPTF
Part Number
Chuck: 28 x 160 mm* T022090 T022093
Part Number
Chuck: 32 x 160 mm** T022091 T022092
APPLICATIONS: Used in heavy breaker applications.
Drawing on traditional breaker design, these heavy breakers are
hard-hitting, but with a somewhat lower weight, impact rate and
power than the CP 1290.
With their lower air consumption and powerful blow, they are
used for heavy applications.
The CP 0117 is available with two different shank sizes.
“Hushed Power” versions equipped with a
mufer are also available (S models).
* Also for 28 x 152 ** Also for 32 x 152 mm
*** Important: Full details of measurement are available in the Safety and Operating
Instructions of the product (Part No. 9800 0612 90).
All values at 6 bar. Air inlet thread is NPTF 3/4". Claw couplings for BSP 3/4"
and G 3/4" can also be used on this thread. The breakers are delivered without
claw couplings.
Please Note: Non-mufed tools are not CE-marked and must not be sold for use in
the EEA (European Economic Area), i.e. EU plus Norway, Iceland and Lichtenstein.
CP 0117 Breakers
KEY FEATURES:
• Relatively hard blow in relation to weight and
air consumption
• Integral oiler – provides continuous lubrication
• Two-bolt backhead – for lower weight
• Spring retainer – also reduces weight
HARD-
HITTING
POWERFUL
BLOW
Pneumatic Breakers for Demolition and Construction 7

KEY FEATURES:
• Tuned valve system – gets more power out of your
breaker and increases productivity
• Improved modern design for excellent durability
• Four-bolt backhead – withstands rugged use
• Reversible piston – reduces maintenance cost
• Lubrication grooves on the piston – increases the
service life of the tool and its major parts
• New swivel design for increased manoeuvrability
• New type of heavy-duty front head springs – reduce
maintenance cost
• “Hushed power” versions equipped with mufers (S-models)
• Versions with improved vibration dampening system (SVR models)
CP 1210 Breakers
APPLICATIONS: Used in light to medium construction, utility and plant
maintenance work such as light demolition of oors, pavements and road
surfaces as well as various other service jobs. They are also often found
on bridge deck jobs.
Although classed as a 35-pound tool, the CP 1210 offers the hitting power
and high performance of a larger tool. There are also a number of different
shank sizes and shank congurations available. In addition to the standard
units, there are also “Hushed Power” versions (S models) and versions
with extra vibration dampening (SVR models).
PNEUMATIC BREAKERS CP 1210 CP 1210 S CP 1210 S CP 1210 SVR CP 1210 SVR
Weight kg 20 22 22.5 24.5 25
Length mm 540 540 585 600 650
Air Consumption l/s 26.5 26.5 26.5 26.5 26.5
Blows Per Minute bpm 1,400 1,400 1,400 1,400 1,400
Vibration Level 3 Axes***
(ISO 20643) m/s2– 14.6 14.6 5.3 5.3
Sound Power Level Guaranteed
(I2000/14/EC) dB(A) – 105 105 105 105
Sound Pressure Level
(ISO 11203) dB(A) – 92 92 92 92
Air Inlet 3/4" NPTF 3/4" NPTF 3/4" NPTF 3/4" NPTF 3/4" NPTF
Part Number (N. American Shank)
Chuck: 25 x 108 mm 8900 0030 01 8900 0030 03 – 8900 0030 05 –
Part Number (ISO Std Shank)
Chuck: 25 x 108 mm 8900 0030 02 8900 0030 04 – 8900 0030 06 –
Part Number
Chuck: 28 x 160 mm*– – 8900 0030 07 – 8900 0030 08
Part Number
Chuck: 32 x 160 mm** – – 8900 0030 09 – 8900 0030 10
* Also for 28 x 152 ** Also for 32 x 152 mm
*** Important: Full details of measurement are available in the Safety and Operating Instructions of the product (Part No. 9800 1351 90).
All values at 6 bar. Air inlet thread is NPTF 3/4". Claw couplings for BSP 3/4" and G 3/4" can also be used on this thread. The breakers are delivered without claw couplings.
Please Note: Non-mufed tools are not CE-marked and must not be sold for use in the EEA (European Economic Area), i.e. EU plus Norway, Iceland and Lichtenstein.
HIGHER
HITTING
POWER
8 Pneumatic Breakers for Demolition and Construction

EASY TO
HANDLE
15% MORE
POWER
• Tuned valve system – gets more power out of
your breaker and increases productivity
• Four-bolt backhead – withstands rugged use
• Integral oiler – provides continuous lubrication
• “Hushed power” version equipped with mufer
(S-model)
• Trenching version with extended handle
(EX model)
KEY FEATURES:
CP 0112 Breakers
APPLICATIONS: Used in light construction work and plant maintenance
including light demolition of oors, pavement and masonry walls and
breaking of frozen ground. They are also popular for bridge deck jobs.
The CP 0112 breakers are the lightest in the CP range and are ideal for
situations where easy handling and weight restrictions are important issues.
A recent upgrade increased the available power by 15%, making this
light breaker even more useful.
The CP 0112 EX version features an extended
handle, making it suitable for light trench work.
PNEUMATIC BREAKERS CP 0112 CP 0112 S CP 0112 EX
Weight kg 13.5 14.5 16
Length mm 535 535 800
Air Consumption l/s 23 23 23
Blows Per Minute bpm 1,620 1,620 1,620
Vibration Level 3 Axes*
(ISO 20643) m/s2– 16.3 –
Sound Power Level Guaranteed
(2000/14/EC) dB(A) – 105 –
Sound Pressure Level
(ISO 11203) dB(A) – 93 –
Air Inlet 3/4" NPTF 3/4" NPTF 3/4" NPTF
Max Head Diameter mm – –
Part Number (N. American Shank)
Chuck: 25 x 108 mm 8900 0030 23 – 8900 0030 24
Part Number (ISO Standard Shank)
Chuck: 25 x 108 mm – 8900 0030 25 –
* Important: Full details of measurement are available in the Safety and Operating Instructions of the product (Part No. 9800 0798 90).
All values at 6 bar. Air inlet thread is NPTF 3/4". Claw couplings for BSP 3/4" and G 3/4" can also be used on this thread.
The breakers are delivered without claw couplings.
Please Note: Non-muffled tools are not CE-marked and must not be sold for use in the EEA (European Economic Area), i.e. EU plus
Norway, Iceland and Lichtenstein.
Pneumatic Breakers for Demolition and Construction 9
CP 0112 EX

RED-X Compressed Air Hose
RED-X rubber hose is manufactured with a woven reinforcement that is at in unpressurized conditions. At one-
third the weight of a conventional rubber hose, it’s easier to handle. This hose is suitable for compressed-air
applications with a maximum working pressure of 20 bar, including: pneumatic rock drills and breakers, crawlers,
water well drill rigs, and water pumps on construction sites, as well as in mining and agricultural applications.
Just as Chicago Pneumatic tools and equipment are built for hard work in real-world
conditions, original CP accessories enhance the tools to t your needs. These parts
and accessories offer the quality and reliability you need to get the most from your
equipment for years to come.
Water Separator
Condensation in the compressed air line system can produce a bucket of water or more per shift! As a result,
water in the compressed air line system causes corrosion and can make pneumatic machines freeze up.
That’s why it’s important to use a genuine CP water separator to protect your machine.
CP water separators are delivered without claw couplings. The thread size is 3/4" and follows the BSP standard
for the European market and the NPT standard for the US market.
RECOMMENDED CLAW COUPLINGS
Part Number Description
8900 0050 00 Water separator, 3/4" BSP (EU version)
9000 0302 00 European type claw coupling 3/4" BSP
8900 0050 01 Water separator, 3/4" NPT (US version)
9001 0005 02 US type claw coupling 3/4" NPT
Lubricator
CP Lubricator 1300 (EU model) and Lubricator 43 (US Model) use the ejector principle to achieve controlled
lubrication. The pick-up inside is intricately bent to give oil supply regardless of the lubricator’s position. Many
cheaper competitive lubricators do not work if turned upside down, so always use a genuine CP lubricator to
provide proper lubrication for your machine.
Part Number Description
8900 0050 02 Lubricator 1300, 1" BSP European type claw coupling premounted (1300 ml)
8900 0050 07 Lubricator 43, 1" NPT US type claw coupling premounted (43 oz)
10 Pneumatic Breakers for Demolition and Construction
Description Inner diameter
mm
Thickness
mm
Max working
pressure bar
Length roll
m
Weight
kg Part Number
Air hose, 60 m 20 2 20 60 11 8900 0050 10
Pre-mounted US/Canada 20 2 20 15 3.6 8900 0050 08
Pre-mounted rest of world 20 2 20 20 4.1 8900 0050 09
KEY FEATURES:
• Extremely exible and easy to unroll
• Easy to store – takes less than half the storage
space of a conventional rubber hose
• Safer to use – woven reinforcement resists
damage; in the event of a rupture, the hose bursts
longitudinally to keep the hose in one piece