Childcare Argent 2in1 User manual

IMPORTANT:
RETAIN FOR FUTURE REFERENCE,
READ CAREFULLY
Argent 2in1
Swing High Chair “Aztec Teal”
Model # 044286-376

SAFETY PRECAUTIONS
Check that all safety locks are engaged before placing a child in the high chair.
Always keep child in view while in high chair.
Not recommended for a child under 6 months old.
The tray is not designed to hold the child in the high chair.
Use safety locks and brakes at all times.
Always secure your child in the restraint.Ensure that your child wears a correctly tted and adjusted harness at
all times.
The high chair should only be used in an upright position once the child is capable of reliably and consistently
sitting upright.
Only use the high chair on a secure level surface.
DO NOT allow children to stand on the seat or footrest or climb into or out of the high chair.
When adjusting the high chair, make sure that parts of your child’s body are clear of any moving parts.
DO NOT carry the high chair with a child in it.
To reduce the risk of injury,position the high chair away from furniture,walls,hot surfaces and liquids,window
covering cords,and electrical cords.Position the high chair away from furniture when the high chair is not being
used at a table with the tray removed.
Periodically check that all parts of the high chair are in good working order.
DO NOT use the high chair if it is damaged or broken.
The weight of the child using this high chair should not exceed 17kgs.
Promptly replace worn out or broken parts.
Apply wheel lock/brakes when not moving the high chair.
Use the high chair on a at,even and horizontal oor.Do not elevate the high chair on any structure or table.
DO NOT use the high chair unless all components are correctly tted and adjusted.
Read all instructions before assembly and use of the swing high chair.
Keep instructions for future use.
FOLLOW THE MANUFACTURER’S INSTRUCTIONS.
DO NOT LEAVE CHILDREN UNATTENDED.
THE HARNESS MUST ALWAYS BE USED AND CORRECTLY FITTED - MOST INJURIES FROM HIGH
CHAIRS ARE CAUSED BY FALLS.
POSITION THE HIGH CHAIR AWAY FROM SOLID STRUCTURES AND BENCHES TO AVOID INJURIES
CAUSED BY FALLS AND BY ACCESSTO DANGEROUS ITEMS.
DO NOT USETHE HIGH CHAIR UNTIL THE CHILD CAN SIT UP UNAIDED.
BE AWARE OFTHE RISK OF OPEN FIRE AND OTHER SOURCES OF STRONG HEAT, SUCH AS ELECTRIC
BAR FIRES, GAS FIRES ETC. IN THE VICINITY OF THE HIGH CHAIR.
WARNING

SAFETY PRECAUTIONS
Only use the swing on a secure level surface.
Discontinue use of swing when infant attempts to climb out.
Discontinue use of swing when infant can roll over.
Never use the toy-bar to carry the swing.
Age range suitability:0 - 6mths / 9kgs.
This cradle swing does not replace a cot or a bed.Should your child need to sleep, then it should be placed in a
suitable cot or bed.
Do not use accessories or replacement parts other than those approved by the manufacturer.
FOLLOW THE MANUFACTURER’S INSTRUCTIONS.
DO NOT LEAVE CHILDREN UNATTENDED.
IT IS DANGEROUSTO USE THE RECLINED SWING ON AN ELEVATED SURFACE (E.G A TABLE).
THIS PRODUCT IS NOT INTENDED FOR PROLONGED PERIODS OF SLEEPING.
ALWAYS USE THE RESTRAINT SYSTEM.
DO NOT USETHIS PRODUCT ONCE YOUR CHILD CAN SIT UP UNAIDED OR WEIGHS MORE THAN 9KG.
TO AVOID INJURY ENSURETHAT CHILDREN ARE KEPT AWAY WHEN UNFOLDING AND FOLDING THIS
PRODUCT.
DO NOT LET CHILDREN PLAY WITH THIS PRODUCT.
DO NOT MOVE OR LIFTTHIS PRODUCT WITH THE BABY INSIDE IT.
NEVER USE THIS PRODUCT ON AN ELEVATED SURFACE (EG.A TABLE).
DO NOT USETHE PRODUCT IF ANY COMPONENTS ARE BROKEN OR MISSING.
DO NOT MIX OLD AND NEW BATTERIES.
DO NOT MIX ALKALINE, STANDARD (CARBON-ZINC) OR RECHARGEABLE (NICKLE-CADMIUM)
BATTERIES.
ADULT SUPERVISION IS REQUIRED WHEN CHARGING RECHARGEABLE BATTERIES.
RECHARGEABLE BATTERIES ARE TO BE REMOVED FROM THE PRODUCT BEFORE BEING CHARGED.
ALWAYS REMOVE FLAT OR EXHAUSTED BATTERIES FROM THE PRODUCT.
DO NOT SHORT CIRCUITTHE SUPPLY TERMINALS.
NON-RECHARGEABLE BATTERIES ARE NOT TO BE RECHARGED.
THE USB CORD IS NOT A TOY.
WARNING
WARNING

Due to variations in the style and design of our products, the photographs and illustrations shown in this
instruction manual are generic,therefore product fabrics,colour and design may vary from images shown.
CNP Brands reserves the right to alter product specications without notice as a result of our ongoing
policy of product improvement.
Contents
Assembly contents list
Assembly / Operating instructions
How to care for your Argent 2in1 Swing High Chair
Congratulations on your purchase of the Argent 2in1
Swing High Chair“Aztec Teal”
This product has been designed and developed with safety,
comfort and functionality in mind. Please take the time to read
this manual carefully before using this product and keep it in a
safe place for future reference.
CONGRATULATIONS

ASSEMBLY CONTENTS
Check what you have received...
You have received 1 box. Please check the contents of the
box against the list below. If anything is missing, please contact
Customer Service.
InAustralia,contact CNP Brands on 1300 667 137,in New Zealand
contact Wainhouse Distribution on 0800 567 5000.
Supplied loose in box:
Main Module
Arm
Rear Leg Tube
x 1
x 1
x 1
x 2
x 1
x 1
x 1
x 1
Main Support
Arm
Seat Support
Arm
Front Leg Tube
Seat
(Pre-Assembled)
Seat Locking Bar
Toy Bar

ASSEMBLY CONTENTS
Tray x 1
x 4
x 1
Alternative Power
Supply
AA Batteries
(Not Included)
USB Power Cord
There are no accessories recommended for use with this Childcare Argent 2in1 Swing High Chair.
Supplied loose in box continued:

ASSEMBLY / OPERATING INSTRUCTIONS
To assemble Frame...
To assemble Seat...
1
1
2
3
Insert main module arm into‘A’ slot of front leg
tube until you hear the‘click’sound.
Slide seat support arms into slot on the side of the
seat assembly.
Insert main support arm into‘B’slot of front leg
tube until you hear the‘click’sound.
Insert rear leg‘U’ shaped tube onto bottom of
main arms until your hear the‘click’sounds from
both sides of the rear leg.
1a.
1a.
2a.
3a.
PLEASE NOTE! Ensure bend in back legs is facing outwards as per picture.

2Attach seat locking bar onto the bottom of
the seat assembly frame by lining up the
corresponding‘C’ stickers.Insert until your hear the
‘click’sound.
2a.
PLEASE NOTE! Teal release button on locking bar should be facing towards
the underside of the seat
ASSEMBLY / OPERATING INSTRUCTIONS
To assemble Seat continued...
3
4
4
To attach seat assembly to frame,line up the numbers
on the inside plastic of the seat support arms with the
corresponding numbers on the inside of the main
frame arms.
Line up metal rod of main frame arm with
housing in the seat support arm.
Can turn metal rod via hand to line up.
Carefully insert seat support arms into main frame
housing.
Ensure a‘click’ sound is heard from both sides to
ensure seat assembly is correctly xed to the high
chair frame.
Seat assembly can now be pulled backward and
locked into place.
3a.
4a.
4b.
4c.
4d.
4a.
Metal rod will only insert when aligned correctly
WARNING

ASSEMBLY / OPERATING INSTRUCTIONS
To adjust Tray...
To assemble Toy Bar...
1
1
2
Tray has 3 lockable positions.
To adjust the tray,locate the tray adjustment buttons
on both the left and right sides of the underside of the
tray.
To insert toy bar,line up with slots on the front of
the seat assembly.
Insert until you hear a‘click’sound.
To remove toy bar,push both tray adjustment
buttons in whilst simultaneously moving the tray
away from the unit.
Push both tray adjustment buttons in whilst
simultaneously moving the tray to one of the other
lockable positions.
To remove tray,push both tray adjustment buttons in
whilst simultaneously moving the tray away from the
unit.
1a.
1b.
1a.
1b.
1c.
2a.
2b.
PLEASE NOTE! Tray can only be used if toy bar is not in use.
PLEASE NOTE! Toy bar can only be used if tray is not in use.
To assemble Tray...
1To attach tray to high chair,line up tray insert bars
with the slots on the front of the seat assembly.
Insert until you hear a‘click’sound.
1a.
1b.

ASSEMBLY / OPERATING INSTRUCTIONS
To adjust Seat Height (High Chair Mode)...
1
2
Seat has 6 adjustable heights.
To adjust seat height,locate seat release levers on
both sides of seat assembly.
Pull up on both levers simultaneously whilst moving
seat up or down to desired position.
Ensure the seat assembly‘clicks’ into place properly
after adjusting.
1a.
1b.
2a.
2b.
To adjust Seat Height (Swing Mode)...
1
2
This high chair also has a swing function.
In order to convert the high chair to swing mode,rst
ensure that the seat assembly has been lowered to
the lowest position.
Squeeze the release trigger located
on the seat locking bar and let seat
assembly swing forward.
1a.
1b.
2a.
PLEASE NOTE! The height of the seat cannot be adjusted whilst the chair is
in swing mode.

ASSEMBLY / OPERATING INSTRUCTIONS
To adjust Footrest...
1
2
This swing high chair has an adjustable footrest.
To adjust footrest,locate the circle adjustment
buttons on both sides of the footrest.
Squeeze both buttons simultaneously to unlock
footrest.
Move footrest to desired position ensuring the
footrest ‘clicks’into place,is secure and level.
1a.
1b.
1c.
2a.
To operate Seat Recline...
1Seat has a 3 position reclineable backrest.
To recline backrest,squeeze trigger located on
back of seat and lower to desired position.
Ensure seat‘clicks’ into place and is secure.
1a.
1b.
1c.
PLEASE NOTE! Seat cannot be fully reclined whilst in lowest height position.
To assemble Harness...
1A three point harness is provided to restrain your child.
To fasten the harness push the waist and shoulder
strap clips (b) into the buckle (a) until they lock in
place.
Sliding adjusters are tted on the shoulder and waist
straps (b).
To unfasten push the button on the buckle (a) and
pull the clips clear.
1a.
1b.
1c.
1d.
b
a
b

ASSEMBLY / OPERATING INSTRUCTIONS
To operate Module Controls...
Speed Indicator Light
Speed down
Power button
Music button
Timer Indicator Light
Power Indicator Light
Timer Button
Speed Up Button
1.
2.
3.
4.
5.
6.
7.
8.
1
2
8
3
7
4
6
5
22a.
2b.
2c.
CAUTION! The harness must be used at all times and be correctly adjusted. Most
injuries from high chairs are caused by falls.
To assemble Harness continued...
The harness should be carefully adjusted so that it ts
your child comfortably.
To adjust the shoulder strap height or to remove the
harness,atten the buttery ends and pass through
the slots in the seat (c).
To ret the straps,atten the buttery ends,pass the
ends through the slots in the seat then open the
buttery ends out (d).
d
a
c
b
c
d

ASSEMBLY / OPERATING INSTRUCTIONS
To operate Swing Mode...
1To begin Swing Mode,ensure seat assembly has
been released from frame via the seat locking
bar.
Turn on power via power button (USB power or
battery power is available).
Controls as per previous page.
1a.
1b.
1c.
To install Batteries (not included)...
1Locate the battery compartment on rear left leg
of product.
Unscrew the battery compartment cover.
Install 4 x‘AA’ alkaline batteries (not included) into
battery compartment.
Ensure that the batteries are facing the
appropriate polarity.
Replace the battery cover and screw back on.
1a.
1b.
1c.
1d.
1e.
DO NOT MIX OLD AND NEW BATTERIES.
DO NOT MIX ALKALINE, STANDARD (CARBON-ZINC) OR RECHARGEABLE (NICKLE-CADMIUM)
BATTERIES.
ADULT SUPERVISION IS REQUIRED WHEN CHARGING RECHARGEABLE BATTERIES.
RECHARGEABLE BATTERIES ARE TO BE REMOVED FROM THE PRODUCT BEFORE BEING CHARGED.
ALWAYS REMOVE FLAT OR EXHAUSTED BATTERIES FROM THE PRODUCT.
DO NOT SHORT CIRCUITTHE SUPPLY TERMINALS.
NON-RECHARGEABLE BATTERIES ARE NOT TO BE RECHARGED.
THE USB CORD IS NOT A TOY.
WARNING

ASSEMBLY / OPERATING INSTRUCTIONS
To fold for Storage...
To insert USB...
1
1
2
3
It is recommended to lower the seat to the lowest
height position for storage purposes.
Tray can be removed for storage if required.
To use USB Power Cord,locate connection on the
bottom left hinge of product.
Insert supplied USB into connection.
Insert opposite end into an appropriate power
supply (not included with product).
Whilst standing behind product, press buttons on
each hinge,then pull unit backwards to fold until
legs lock in place.
To unfold the product,stand behind product,
press buttons on each hinge, then push unit
forwards to unfold until legs lock in place.
Unit can stand alone when folded.
1a.
1b.
1a.
1b.
1c.
2a.
2b.
3a.

HOW TO CARE FOR YOUR CHILDCARE 2IN1 SWING HIGH CHAIR
Cleaning
Storage
Maintenance
This product has been designed and developed with safety, comfort and
functionality in mind. Please take the time to read this manual carefully before
using this product and keep it in a safe place for future reference.
To ensure the long-lasting use of your 2in1 swing high chair, wipe down with
a damp cloth and use a mild soap solution if necessary. Do not use abrasive
cleaners.Always store product in a clean dry place.
Seat pad:
Remove from frame. Fasten buckles on seat restraint and seat pad. Machine
wash with cold water, gentle cycle. No bleach.
Snack tray:
Wipe clean with a damp cloth and mild soap.Air dry. Do not immerse in water.
Always store product in a clean and dry place.Remove batteries prior to placing
unit in storage to prevent battery leakage/corrosion to battery compartment.
Always check parts regularly for tightness of screws, nuts and other
fasteners – tighten or replace if required. To maintain the safety of
your 2in1 swing high chair, seek prompt repairs for bent, torn, worn
or broken parts. Use only those parts and accessories approved by
CNP Brands.
If you have any difculties in assembling the 2in1 swing high chair,
please contact our Service Department.
In Australia, contact CNP Brands on 1300 667 137, in New Zealand
contact Wainhouse Distribution on 0800 567 5000.

Distributed in Australia by CNP Brands
20 Calarco Drive,
Derrimut,VIC, 3030
Customer Service 1300 667 137
W: www.cnpbrands.com.au
E: [e-mail]
F: www.facebook.com/CNPBrands
I: @cnp_baby
Distributed in New Zealand by Wainhouse
Distribution
2-6 Argyle St, Morningside,
PO Box 41-014,
St Lukes,Auckland, New Zealand
Customer Service: 0800 567 5000
E: [e-mail]