ChinaPST PST-VDI31 User manual

PST-VDI31 Indoor Monitor
User Manual

2
1
Indoor Unit
Key components description:
①Display screen
②Speaker:
③Talk / up button:
④Down button
⑤Setting / Monitor button:
⑥Unlock button:

2
1
⑦Microphone:
⑧Activity indicator LED
⑨Power indicator LED
⑩Volume adjustment
⑪Contrast adjustment
⑫Brightness adjustment
⒀DC input socket:
⒁Camera connection socket
⒂Second monitor connection socket
⒃Wall Mounting Bracket
Basic Operation
a) Talk : when the “call” button on outside door was pressed , the
music will be triggered at home . In 20 seconds ,if press “call”
button on indoor monitor , the talk process is established .
Video picture can be viewed on home side . After talking and
press “call” button on indoor monitor , the talk process is
ended . If not press “call” button after music started for 20
seconds , the music will automatically stop . The maximum talk
time is 90 seconds.
b)Monitor : In idle state if you want to view the outside video
picture ,press the “Monitor” key.Press again will stop the
video viewing .
c)Unlock: If you have installed electronic controlled lock with the system ,
you can use the “unlock” key to open the door when In
intercom model .
d) Select music: There are 3 music for user to select . Press and hold
“Monitor” key for about 5 seconds , release it when you hear a
music is played . Press “function” key to choose a music

2
1
you like . Press “Monitor” key to confirm it and save it . 2
beeps will indicate success . If Monitor key not pressed the
music select process will be automatically ended in 10
seconds.
e)Select music volume: There are 4 volumes for user to select . Press
and hold “function” key for about 5 seconds . Release it when
you hear a music is played . Press “Monitor” key to select a
volume you like . Press “function” key to confirm it and
save it . 2 beeps will indicate success . If Monitor key not
pressed the music select process will be automatically ended
in 10 seconds.
Adjust video : Turn the video adjustment until you like it . The video
adjustment knob is on the side of the phone .
a) when talk ended , please press “call” button .This will
make the next call comes immediately after this call .
b) If 1 outdoor camera connect 2 indoor monitors ,You also
can call between 2 monitors
Press “call” button in monitor 1, then press “call” button in
monitor 2 . the communication connect establish. This time
press “call” button in any monitor ,the talk between 2
monitors will be ended .
c) Call for professional service if it does not work , never
open it yourself.

2
1
.Monitor Setup
Mounting Position,
Intercom Station
The standard height for the intercom station
installation is 1300mm (note: this depends on the
individual’s height), so the centre of the monitor
coincides with the line of vision.
The distance between the ground level
and the bottom of the intercom station is
approximately 1300mm.
1 .Drill three holes on the wall
according to the monitor's wall
mounting bracket. Move the
cables through the monitor's wall
mounting bracket then secure
the mounting bracket using
screws.
2.Attach cables to the monitor
then Install the monitor on the
wall mounting

2
1
.Specifications
Indoor monitor
Power
Input：AC 100-240V
50/60Hz
Output：DC 14V/1A
Screen
7” TFT
3. Finish the monitor installion
and plug the adaptor,power on .

2
1
LCD
Resolution
960×234pixels
Communication
Model
Handfree
Communication
wire
Connection
4-wire Connection
Chime Melody
3 Chimes
Maximum
Power
Consumption
20W
Dimensions
229 × 162 × 33mm