Chipolino SUPER CAR User manual

This toy is produced in conformity with the requirements of
Toy Safety Directive 2009/48/EC of the European Parliament and the Council,
the regulation on essential requirements and conformity assessment of toys,
the regulation on conformity marking and the applicable European standards.
IMPORTANT! RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE!
INSTRUCTION MANUAL
FOR TOY RIDE ON CAR
MODEL “SUPER CAR”

1
IMPORTANT! WARNINGS!
• CAUTION! NEVER LEAVE THE CHILD UNATTENDED!
• CAUTION! THIS TOY HAS NO BRAKE!
• CAUTION! THIS TOY IS NOT SUITABLE FOR CHILDREN UNDER 1.5 YEARS AND WEIGHT
MORE THAN 20kg. DO NOT OVERLOAD!
• CAUTION! THIS PRODUCT IS NOT A TRANSPORT MEANS!
• CAUTION! DO NOT USE ON ROAD LANES!
• CAUTION! KEEP AWAY FROM FIRE!
• AUTION! BEFORE USE, CHECK THE GOOD WORKING ORDER AND FIXING OF ALL PARTS.
• Use for a child over 1.5 years of age!
• Not to be used by two children simultaneously!
• Adult assembly only!
• The child must wear shoes at all times when using the toy! It is advisable to use helmet and protectors.
• Use only during the day and in places with good lighting.
• Do not let children touch the wheels or stand close to them while the ride on car is moving!
• Iftherearestickersgoingo󰀨,youmuststickthembackorremovethemtoavoidchildrenswallowingthem!
• Donotusetheproductifyoundanymissingordamagedparts!
• Do not use spare parts or other components, which are not supplied by the producer! The producer
 revokesallresponsibilityincasepartsdi󰀨erentfromtheoriginaloneshavebeenused.
• Donotmakechangesormodicationstotheconstruction!Ifnecessary,contacttheretaileroran
authorized service center for advice and repair.
• Use the product only for its purpose!
• Do not allow presence of children under 1,5 years before assembly of the product is complete,
to avoid access to small or loose parts!
• Donottiestringsoraccessoriestotheproductinordertoavoidtheriskofsu󰀨ocation.
• Use only on even playgrounds and at a safe distance from streets or road lanes for vehicles!
• Do not use the product near stairs, escalators, protrusions, swimming pools etc.!
• Keepnylonpackagesawayfromchildrentoavoidriskofsu󰀨ocation!
TO GUARANTEE THE SAFE USE OF THIS PRODUCT FOLLOW
THE WARNINGS, GUIDELINES AND RECOMMENDATIONS IN THIS MANUAL!
• Do not allow children to access or play with the batteries!
• Use only batteries of the designated type and power.
• Donotusebatteriesofdi󰀨erenttypes.
• Do not mix new with used batteries.
• Follow the designated polarity in the battery compartment.
• Remove damaged or worn out batteries.
• Remove the batteries when the product will not be used for long time.
• Donotthrowthebatteriesinopenre.Donottakethebatteriestopieces.
CAUTION! Waste from depleted or unusable batteries must be disposed of separately. It is forbidden
tothrowthemoutincontainersforhouseholdwaste.Disposeofthebatteriesonlyatthespecied
places.
IMPORTANT! WARNINGS AND GUIDELINES FOR BATTERY USE

2
MAIN PARTS
Please check that the described parts are available.
• The toy is intended for a child over 1.5 years of age and weighing up to 20 kg!
• When the child is sitting in it, the ride on car is propelled by the child’s feet.
• Safety bumper
• Foot rest
• Stirring wheel with melodies
• Parent push handle
• Batteries,2pcs,typeАА/1,5V.Batteriesarenotincludedintheset.
MAIN FEATURES OF THE PRODUCT
Part name Photo Qty Part name Photo Qty
Body 1 pc Axle 2 pcs
Stirring wheel 1 pc Parent push
handle 1 pc
Front wheels
and stirring
wheel holder
1 pc Canopy 1 pc
Safety
bumper,
set
1 pc Footrest 1 pc
Rear wheels
holder 1 pc Fixings, Set 1
Backrest 1 pc Fixings,
Set 2
Wheel 4 pcs Wheel cover 4 pcs

3
1. ASSEMBLY OF FRONT WHEELS
1-1 – Place the front wheel on the front axle and insert the axle in the holder opening.
1-2 – Place the other wheel on the front axle.
1-3 – Place washer Ø6 on the axle.
1-4–Insertthexingpinintheaxleopening.
1-5 – Attach the wheel cover with pressure.
IMPORTANT! When attaching the wheel cover, its pins must match the openings in the wheel.
Install the other front wheel following the same actions.
2. ASSEMBLY OF REAR WHEELS
2-1 – Place the rear wheel on the rear axle and insert the axle in the holder opening.
2-2 – Place the other wheel on the rear axle.
2-3 – Place washer Ø6 on the axle.
2-4–Insertthexingpinintheaxleopening.
2-5 – Attach the wheel cover with pressure.
IMPORTANT! When attaching the wheel cover, its pins must match the openings in the wheel.
Install the other front wheel following the same actions.
3. INSTALLING THE BACKREST
Insert the backrest to the body and press until you hear a click.
4. INSTALLING THE REAR WHEELS HOLDER
Place the holder on the down part of the body as shown. Fix it with screws.
5. INSTALLING THE FOOTREST
Placethefootrestonthebottomofthebody(1)andpushitinthedirectionshown(2),inordertoxit.
6. INSTALLING THE FRONT WHEELS AND STIRRING WHEEL HOLDER
6-1 – Insert the holder in the body opening, as shown in the picture.
6-2 – Place the stirring wheel on the holder tube.
6-3–FixitwithscrewМ5х40andwasherМ5.
7. INSTALLING THE SAFETY BUMPER
7-1 – Place on of the bumper arms on the seat (1) and twist it to the stirring wheel.
7-2–Pullthebuttonandpressthebumperagainstthestirringwheel.Releasethebuttoninordertoxit.
7-3 – Install other arm of the bumper the same way.
8. INSTALLING THE PARENT PUSH HANDLE
Insertthehandleinthebackrestopeningandpressrmly.
9. ASSEMBLED TOY.
WARNING! Follow exactly the instructions and sequences for assembly and using the product from the
belowgures.
WARNING!Checkthesecurityofxingafterperforminganyoperation!
Required tools for performing some operations: screwdriver (not included).
The toy assembly operations and functions are described below from 1 to 9.
Use the descriptions below along with the illustration bearing the same number.
ASSEMBLY UNSTRUCTIONS AND FUNCTIONS
ASSEMBLY

4
1-1 1-2
1-3 1-5
2-1
2-2 2-3
1-4
front wheel
front wheel
front axle
държач
holder
xing pin
front axle
washer
rear wheel
rear wheel
rear wheel
rear axle
washer
rear axle
“click”
wheel cover

5
2-4
5
1
2
3 4
2-5
xing pin
“click”
“click”
screws
backrest
footrest
rear wheels
holder
wheel cover

6
6-1 6-2
6-3
7-1
1
2
7-2 7-3
holder
stirring
wheel
holder
screw
button
bumper
bumper
washer

7
FUNCTIONS
• STIRRING WHEEL IWHT MELODIES
Press one of the buttons on the stirring wheel to play melodies and sounds.
Tousethisfunctionyoumustplace2pcsbatteriesoftypeАА/1,5Vinthebatteriescompartment:
1. Unscrew the battery compartment cover by using a screwdriver and remove it.
Note: The battery compartment is located under the stirring wheel.
2.Place2pcsbatteriestypeАА/1,5Vinthebatteriescompartment,followingthebatteriespolarity.
3. Press one of the buttons to check if it is working.
4. Put the cover back and tighten it with a screwdriver.
89
parent push
handle
battery slot
socket cover
for batteries
screw
Necessary batteries: 2pcs type AA/1,5V (LR6)Melodies/sounds buttons

8
• PARENT PUSH HANDLE
1. The parent can push the ride on car by the handle and the child may step on the footrest.
2. Pull out the handle and remove the footrest. The child can ride the car on his own by pushing with
his legs.
WARNING! The handle should be removed when the child is capable to ride the toy unassited.
CARE AND MAINTENANCE INSTRUCTIONS
• Regularly check the plastic parts of the ride on car for any cracks or damage.
• Regularly oil the moving parts.
• Clean the toy by using a damp soft towel or sponge and a mild soap. Do not pour water on the toy.
• Do not clean with aggressive detergents containing abrasive particles, ammonia, bleach or spirit.
• Store the product in a clean and dry place, without moisture and at a safe distance from heat
 sources!Donotsubjecttodirectenvironmentale󰀨ect–sun,rain,moistureorharshtemperature
changes!
• Do not use the product on muddy, sandy or gravel covered terrains, which can damage the moving
parts.
Used materials: plastic, metal
ROCSC023xxx/K401-3
1 2

CHIPOLINO LTD., 1 Goliamokonarsko Shosse Str, Plovdiv, BULGARIA
www.chipolino.com