Chroma Space Force User manual

Manual Yoke Space ForceTM Quick Start Guide V1.5 P/N: 650-0903
Quick Start Guide
Chroma-Q®
Space ForceTM
Manual Yoke Installation
For a full product manual please visit www.chroma-q.com
Part Number: CHSFPV
Model: 650-9010

Manual Yoke Space ForceTM Quick Start Guide V1.5 P/N: 650-0903
Knob Black
M10X1.5-20 mm
1. Items in the Kit: Space Force Offset Yoke (650-9010)
Items
Part Number
Qty.
Space Force Yoke Bracket M12 Blk
650-0035
2
Yoke Offset
650-0055
1
Knob M10x1.5 - 20mm Black
648-0113
1
Spigot for Yoke
900-0621
1
Adjustable Handle Offset Yoke
900-0672
1
Friction Disc 12mm ID, 63mm OD
900-0613
1
Friction Disc 16mm ID, 63mm OD
900-0595
1
Thrust Bearing 12mm ID, 26mm OD, 9mm thick (set of 3)
900-0614
2
Bushing Flanged 12mm ID, 25mm Blk
412-5012-0
1
Washer Spring 12mm ID
412-2822-0
1
Screw M12X40 SHSC Blk
412-1440-0
1
Bolt M12x30 Hex Head Blk
412-1930-0
1
Screw M4x8 FH Phillips Blk
440-1108-0
8
Washer Flat 1/2"
350-2114-4
1
Bag 4 x 6 Zip lock
900-0638
1
2. Tools Required
➢Screwdriver PZ1 x 80mm for the Side Bracket screws (Minimum torque: 5.5 in-lb.)
➢19 mm (or adjustable) wrench/spanner
➢10 mm Allen key
3. Installation Procedure

Manual Yoke Space ForceTM Quick Start Guide V1.5 P/N: 650-0903
1. Install the Yoke Brackets (650-0035) on both sides of space force unit using PZ1 x
80mm screw driver. Tighten the screws (440-1108-0) to make a solid connection.
2. On the yoke arm with the 12mm hole, place the Friction Disc (900-0613) in between the
Yoke (650-0055) and the Yoke Bracket (650-0035). Place the Friction Disc in parallel to
the Yoke Bracket and then place the Yoke opposite and in line with it.
3. Place the Thrust Bearing set (900-0614) on outer side of the Yoke, and then install the
Adjustable Handle (900-0672).
4. Press and spin clockwise the Adjustable Handle to allow the threaded screw to go into
the threaded hole of the Yoke Bracket. Rotate until the joint is tightened.
6. On the yoke arm with the16 mm diameter hole, place the Friction Disc (900-0595) in
between Yoke Bracket and the Yoke, then slide the Bushing Flanged 12MM BLK (412-
5012-0) in slot, insert the M12X30 Bolt (412-1930-0) with the 2nd Thrust Bearing (900-
0614) between Bushing and Bolt using a wrench. Tighten the Bolt completely to make a
solid connection.
Space Force Yoke
Bracket M12 BLK
(650-0035)
Friction Disc 12mm ID,
63mm OD (900-0613)
Thrust Bearing
12mm ID, 26mm
OD (900-0614)
9mm Thick
Adjustable Handle
Offset Yoke
(900-0672)
Offset Yoke
(650-0055)

Manual Yoke Space ForceTM Quick Start Guide V1.5 P/N: 650-0903
Screw M12X40
SHSC Blk
(412-1440-0)
Washer Spring
12mm ID
(412-5012-0)
Washer
Flat 1/2"
(350-2114-4)
Offset Yoke
(650-0055)
Offset Yoke
(650-0055)
Spigot for Yoke
(900-0621)
Knob M10x1.5 -
20mm Black
(648-0113)
7. Attach the Spigot to the Yoke using the M12X40 SHSC Screw, placing the ½” washer
and 12 mm spring washer in between. Use appropriate Allen key to tighten the M12X40
Screw to make a solid connection. Attach the Knob to the spigot.
Screw M4X8 FH
Philips BLK
(440-1108-0)
Friction Disc 16mm
ID, 63mm OD
(900-0595)
Bushing Flanged 12mm
ID, 25mm OD BLK
(412-5012-0)
Offset Yoke
(650-0055)
Bolt M12X30
Hex Head Blk
(412-1930-0)
Thrust
Bearing
12mm ID,
26mm OD,
9mm Thick
(900-00614)

Manual Yoke Space ForceTM Quick Start Guide V1.5 P/N: 650-0903
Offset Yoke (650-0055)

Manual Yoke Space ForceTM Quick Start Guide V1.5 P/N: 650-0903
Chroma-Q Space force with Offset Yoke Accessory

Manual Yoke Space ForceTM Quick Start Guide V1.5 P/N: 650-0903
Disclaimer
Dimensions and illustrative drawings contained herein are accurate to the company’s
knowledge at the time of printing, however specifications are subject to change without
notice.
Further Information
Please refer to the Chroma-Q Space ForceTM manual for more detailed information. A copy
of the manual can be found at the Chroma-Q website –
http://www.chroma-q.com/support/downloads.asp

Manual Yoke Space ForceTM Quick Start Guide V1.5 P/N: 650-0903
Approvals & Disclaimer
The information contained herein is offered in good faith and is believed to be
accurate. However, because conditions and methods of use of our products are
beyond our control, this information should not be used in substitution for
customer's tests to ensure that Chroma-Q products are safe, effective, and fully
satisfactory for the intended end use. Suggestions of use shall not be taken as
inducements to infringe any patent. Chroma-Q sole warranty is that the product
will meet the Chroma-Q sales specifications in effect at the time of shipment. Your
exclusive remedy for breach of such warranty is limited to refund of purchase price
or replacement of any product shown to be other than as warranted.
Chroma-Q reserves the right to change or make alteration to devices and their
functionality without notice due to on-going research and development.
The Chroma-Q Space Force has been designed specifically for the lighting
industry. Regular maintenance should be performed to ensure that the products
perform well in the entertainment environment.
If you experience any difficulties with any Chroma-Q products please contact your
selling dealer. If your selling dealer is unable to help please contact
[email protected]. If the selling dealer is unable to satisfy your servicing
needs, please contact the following for full factory service:
Outside North America: North America:
Tel: [phone] Tel: [phone]
Fax: [phone] Fax: [phone]
[e-mail]@chroma-q.com
For further information please visit the Chroma-Q website at www.chroma-com.
Chroma-Q is a trademark, for more information on this visit
www.chroma-q.com/trademarks.
The rights and ownership of all trademarks are recognized.