Cincoze CO-100/P1301 Series User manual

CO-100/P1301 Series
User Manual
Open Frame Panel PC
TFT-LCD Open Frame Panel PC with Intel® Alder Lake N Series Processor
Version: V1.00
Open Frame Panel PC

CO-100/P1301 Series | User Manual 2
Contents
Preface..................................................................................................................................................5
Revision ........................................................................................................................................5
Copyright Notice ..........................................................................................................................5
Acknowledgement .......................................................................................................................5
Disclaimer.....................................................................................................................................5
Declaration of Conformity............................................................................................................6
Product Warranty Statement.......................................................................................................6
Technical Support and Assistance................................................................................................7
Conventions Used in this Manual ................................................................................................8
Safety Precautions........................................................................................................................8
Package Contents.........................................................................................................................9
Ordering Information .................................................................................................................10
Chapter 1 Product Introductions .......................................................................................................11
1.1 Overview ..............................................................................................................................12
1.2 Specifications .......................................................................................................................14
1.2.1 CO-119C-R10/P1301 Series.........................................................................................14
1.2.2 CO-W121C-R10/P1301 Series .....................................................................................18
1.3 External Layout.....................................................................................................................22
1.3.1 Front ............................................................................................................................22
1.3.2 Rear..............................................................................................................................22
1.3.3 Left...............................................................................................................................23
1.3.4 Right.............................................................................................................................23
Chapter 2 Introduction to Switches & Connectors ............................................................................24
2.1 Location of Switches and Connectors ..................................................................................25
2.1.1 Top View......................................................................................................................25
2.1.2 Bottom View................................................................................................................25
2.2 Switches and Connectors Definition ....................................................................................26
2.3 Definition of Switches ..........................................................................................................27
2.4 Definition of Connectors......................................................................................................29
2.5 Optional Module Pin Definition & Settings..........................................................................33
2.5.1 CFM-IGN101 Module...................................................................................................33
Chapter 3 System Setup.....................................................................................................................34
3.1 Removing Top Cover.............................................................................................................35
3.2 Installing SO-DIMM Memory ...............................................................................................36
3.3 Installing M.2 Key B Card......................................................................................................37
3.3.1 M.2 Key B type 3052....................................................................................................37
3.3.2 M.2 Key B type 3042....................................................................................................38
3.4 Installing M.2 Key E Card......................................................................................................39

CO-100/P1301 Series | User Manual 3
3.5 Installing Antenna(s) ............................................................................................................40
3.6 Installing CPU Thermal Pad ..................................................................................................42
3.7 Installing Top Cover..............................................................................................................43
3.8 Installing SATA Hard Drive ....................................................................................................44
3.9 Installing SIM Card................................................................................................................46
3.10 Installing CFM Modules......................................................................................................47
3.10.1 CFM-IGN101 ..............................................................................................................47
3.10.2 CFM-PoE02 ................................................................................................................48
3.11 Disassembling the CO Display Module ..............................................................................50
3.12 Installing Standard Mount..................................................................................................50
3.12.1 Fixing from front side ................................................................................................51
3.12.2 Fixing from rear side..................................................................................................52
3.13 Installing Flat Mount ..........................................................................................................53
3.13.1 Fixing from front side ................................................................................................57
3.13.2 Fixing from rear side..................................................................................................58
3.14 Disassemble the mounting brackets..................................................................................59
3.15 Installing VESA Mount........................................................................................................61
3.16 Installing Rack Mount.........................................................................................................62
Chapter 4 BIOS Setup.........................................................................................................................64
4.1 BIOS Introduction.................................................................................................................65
4.2 Main Setup...........................................................................................................................66
4.3 Advanced Setup ...................................................................................................................67
4.3.1 CPU Configuration .......................................................................................................67
4.3.2 SATA Configuration .....................................................................................................68
4.3.3 PCH-FW Configuration.................................................................................................68
4.3.4 Trusted Computing Settings........................................................................................69
4.3.5 ACPI Settings................................................................................................................71
4.3.6 F81966 Super IO Configuration...................................................................................71
4.3.7 Hardware Monitor.......................................................................................................73
4.3.8 S5 RTC Wake Settings..................................................................................................73
4.3.9 Serial Port Console Redirection...................................................................................74
4.3.10 USB Configuration .....................................................................................................74
4.3.11 Network Stack Configuration ....................................................................................75
4.3.13 CSM Configuration ....................................................................................................75
4.3.14 NVMe Configuration..................................................................................................76
4.4 Chipset Setup .......................................................................................................................77
4.4.1 System Agent (SA) Configuration ................................................................................77
4.4.2 PCH-IO Configuration ..................................................................................................78
4.5 Security Setup ......................................................................................................................80
4.6 Boot Setup............................................................................................................................81

CO-100/P1301 Series | User Manual 4
4.7 Save & Exit............................................................................................................................82
Chapter 5 Product Application...........................................................................................................83
5.1 Where to download drivers? ...............................................................................................84
5.2 Where to find the technical documents? ............................................................................84

CO-100/P1301 Series | User Manual 5
Preface
Revision
Revision
Description
Date
1.00
First Released
2024/01/25
Copyright Notice
© 2024 by Cincoze Co., Ltd. All rights are reserved. No parts of this manual may be copied,
modified, or reproduced in any form or by any means for commercial use without the prior written
permission of Cincoze Co., Ltd. All information and specification provided in this manual are for
reference only and remain subject to change without prior notice.
Acknowledgement
Cincoze is a registered trademark of Cincoze Co., Ltd. All registered trademarks and product names
mentioned herein are used for identification purposes only and may be trademarks and/or
registered trademarks of their respective owners.
Disclaimer
This manual is intended to be used as a practical and informative guide only and is subject to
change without notice. It does not represent a commitment on the part of Cincoze. This product
might include unintentional technical or typographical errors. Changes are periodically made to the
information herein to correct such errors, and these changes are incorporated into new editions of
the publication.

CO-100/P1301 Series | User Manual 6
Declaration of Conformity
FCC
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.
CE
The product(s) described in this manual complies with all application European
Union (CE) directives if it has a CE marking. For computer systems to remain CE
compliant, only CE-compliant parts may be used. Maintaining CE compliance also
requires proper cable and cabling techniques.
Product Warranty Statement
Warranty
Cincoze products are warranted by Cincoze Co., Ltd. to be free from defect in materials and
workmanship for 2 years (2 Years for PC Module, 1 Year for Display Module) from the date of
purchase by the original purchaser. During the warranty period, we shall, at our option, either
repair or replace any product that proves to be defective under normal operation. Defects,
malfunctions, or failures of the warranted product caused by damage resulting from natural
disasters (such as by lightening, flood, earthquake, etc.), environmental and atmospheric
disturbances, other external forces such as power line disturbances, plugging the board in under
power, or incorrect cabling, and damage caused by misuse, abuse, and unauthorized alteration or
repair, and the product in question is either software, or an expendable item (such as a fuse,
battery, etc.), are not warranted.
RMA
Before sending your product in, you will need to fill in Cincoze RMA Request Form and obtain an
RMA number from us. Our staff is available at any time to provide you with the most friendly and
immediate service.
◼RMA Instruction
⚫Customers must fill in Cincoze Return Merchandise Authorization (RMA) Request
Form and obtain an RMA number prior to returning a defective product to Cincoze
for service.
⚫Customers must collect all the information about the problems encountered and

CO-100/P1301 Series | User Manual 7
note anything abnormal and describe the problems on the “Cincoze Service Form”
for the RMA number apply process.
⚫Charges may be incurred for certain repairs. Cincoze will charge for repairs to
products whose warranty period has expired. Cincoze will also charge for repairs to
products if the damage resulted from acts of God, environmental or atmospheric
disturbances, or other external forces through misuse, abuse, or unauthorized
alteration or repair. If charges will be incurred for a repair, Cincoze lists all charges,
and will wait for customer’s approval before performing the repair.
⚫Customers agree to ensure the product or assume the risk of loss or damage during
transit, to prepay shipping charges, and to use the original shipping container or
equivalent.
⚫Customers can be sent back the faulty products with or without accessories
(manuals, cable, etc.) and any components from the system. If the components
were suspected as part of the problems, please note clearly which components are
included. Otherwise, Cincoze is not responsible for the devices/parts.
⚫Repaired items will be shipped along with a "Repair Report" detailing the findings
and actions taken.
Limitation of Liability
Cincoze’ liability arising out of the manufacture, sale, or supplying of the product and its use,
whether based on warranty, contract, negligence, product liability, or otherwise, shall not exceed
the original selling price of the product. The remedies provided herein are the customer’s sole and
exclusive remedies. In no event shall Cincoze be liable for direct, indirect, special or consequential
damages whether based on contract of any other legal theory.
Technical Support and Assistance
1. Visit the Cincoze website at www.cincoze.com where you can find the latest information about
the product.
2. Contact your distributor or our technical support team or sales representative for technical
support if you need additional assistance. Please have following information ready before you
call:
⚫Product name and serial number
⚫Description of your peripheral attachments
⚫Description of your software (operating system, version, application software, etc.)
⚫A complete description of the problem
⚫The exact wording of any error messages

CO-100/P1301 Series | User Manual 8
Conventions Used in this Manual
Safety Precautions
Before installing and using this device, please note the following precautions.
1. Read these safety instructions carefully.
2. Keep this User’s Manual for future reference.
3. Disconnected this equipment from any AC outlet before cleaning.
4. For plug-in equipment, the power outlet socket must be located near the equipment and
must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping it or letting it fall may
cause damage.
7. Make sure the voltage of the power source is correct before connecting the equipment to the
power outlet.
8. Use a power cord that has been approved for using with the product and that it matches the
voltage and current marked on the product’s electrical range label. The voltage and current
rating of the cord must be greater than the voltage and current rating marked on the product.
9. Position the power cord so that people cannot step on it. Do not place anything over the
power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the power source to avoid
damage by transient overvoltage.
12. Never pour any liquid into an opening. This may cause fire or electrical shock.
This indication alerts operators to an operation that, if not strictly observed, may result
in severe injury.
(Cette indication avertit les opérateurs d'une opération qui, si elle n'est pas strictement
observée, peut entraîner des blessures graves.)
WARNING
(AVERTIR)
This indication alerts operators to an operation that, if not strictly observed, may result
in safety hazards to personnel or damage to equipment.
(Cette indication avertit les opérateurs d'une opération qui, si elle n'est pas strictement
observée, peut entraîner des risques pour la sécurité du personnel ou des dommages à
l'équipement.)
CAUTION
(ATTENTION)
This indication provides additional information to complete a task easily.
(Cette indication fournit des informations supplémentaires pour effectuer facilement
une tâche.)
NOTE
(NOTE)

CO-100/P1301 Series | User Manual 9
13. Never open the equipment. For safety reasons, the equipment should be opened only by
qualified service personnel.
If one of the following situations arises, get the equipment checked by service personnel:
⚫The power cord or plug is damaged.
⚫Liquid has penetrated into the equipment.
⚫The equipment has been exposed to moisture.
⚫The equipment does not work well, or you cannot get it work according to the user's
manual.
⚫The equipment has been dropped and damaged.
⚫The equipment has obvious signs of breakage.
14. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type recommended by the manufacturer.
15. Equipment intended only for use in a RESTRICTED ACCESS AREA.
16. Ensure to connect the power cord of power adapter to a socket-outlet with earthing
connection.
17. Dispose of used battery promptly. Keep away from children. Do not disassemble and do not
dispose of in fire.
Package Contents
Before installation, please ensure all the items listed in the following table are included in the
package.
Item
Description
Q’ty
1
CO-100/P1301 Series Panel PC
1
2
Power Terminal Block Connector
1
3
Thermal Pad (for CPU Thermal Block)
1
4
Screw Pack
5
5
Remote Power On/Off Terminal Block Connector
1
6
DIO Terminal Block Connector
2
Note: Notify your sales representative if any of the above items are missing or damaged.

CO-100/P1301 Series | User Manual 10
Ordering Information
Available Models
Model No.
Product Description
CO-119C-R10/P1301-N97-R10
19“TFT-LCD SXGA 5:4 Open Frame Display Modular
Panel PC with Intel® Processor N97 Quad Core
Processor and Projected Capacitive Touch
CO-119C-R10/P1301-X7425E-R10
19“TFT-LCD SXGA 5:4 Open Frame Display Modular
Panel PC with Intel® Atom® x7425E Quad Core
Processor and Projected Capacitive Touch
CO-W121C-R10/P1301-N97-R10
21.5" TFT-LCD Full HD 16:9 Open Frame Display
Modular Panel PC with Intel® Processor N97 Quad
Core Processor and Projected Capacitive Touch
CO-W121C-R10/P1301-X7425E-R10
21.5" TFT-LCD Full HD 16:9 Open Frame Display
Modular Panel PC with Intel® Atom® x7425E Quad
Core Processor and Projected Capacitive Touch

CO-100/P1301 Series | User Manual 11
Chapter 1
Product Introductions

CO-100/P1301 Series | User Manual 12
1.1 Overview
Cincoze open frame industrial panel PC series (CO-100/P1301) is equipped with an Intel® Alder Lake-N processor, rich I/O interfaces
(2.5 GbE LAN, USB3.2 Gen2x1, COM, DIO, etc.), and flexible expansion. The biggest highlight is its adjustable mounting bracket
design (Patent No.: D224544, D224545, I802427) that allows flexible adjustment and multi-stage locking to greatly improve the
convenience of installation in cabinets of various materials and thicknesses, effectively reducing the degree of customization
required by equipment manufacturers when integrating with equipment. Its rugged design takes into account the application
requirements for field-side HMI in harsh industrial environments
Key Features
• 19”~21.5” TFT-LCD with Projected Capacitive Touch
• Onboard Intel® Alder Lake-N Processor N97 and Atom® x7425E Processor
• 1x DDR5 SO-DIMM Socket, Supports up to 4800MHz & 16GB Memory
• 1x M.2 Key E Type 2230 Socket for Wireless/Intel CNVi Module Expansion
• 1x M.2 Key B Type 3042/3052 Socket for 5G/Storage/Add-on Card Expansion
• Front Panel IP65 Compliant
• Designed with Adjustable Mounting Bracket
• Supports Flat / Standard / VESA / Rack Mount
• Supports Cincoze Patent CDS Technology (Patent No. M482908)
AI & Multitasking Performance
The CO-100/P1301 is equipped with an Intel Alder Lake-N quad-core processor
based on the Intel® 7 process. Compared with the previous generation Elkhart
Lake platform, the CPU single-thread performance is improved by up to 130%, and
the multi-thread performance is improved by 109%. The built-in UHD graphics
chip improves AI inference, with 6.85 times the object recognition performance.
Convenient Upgrades & Repairs
Cincoze Convertible Display System (CDS) patented technology makes field-side
maintenance and future upgrades easier. Replacing a display or improving
system performance only requires replacing a single module, which significantly
cuts upgrade costs.

CO-100/P1301 Series | User Manual 13
Easy to Install
The exclusive adjustable mounting bracket has thickness adjustment options and
supports multiple locking methods (panel and boss types), providing a simpler and
more convenient integration for industrial machines using flat mount and standard
mount
Integrated Structure
The flexible and reliable design of the open-frame architecture panel PC
enables deployment in equipment machines, and after removing the mounting
bracket can be installed directly using the VESA mount for standalone use, or
installed in a 19” rack for display function.
Wide Temps, Safe & More Reliable
The CO-100/P1301 series features a series of industrial-grade protections, such as a
fanless design, wide operating temperature range (0°C to 60°C), wide range DC
power input (9 to 48VDC), and IP65 dustproof/water resistant front panel for
field-side HMI applications in harsh industrial environments

CO-100/P1301 Series | User Manual 14
1.2 Specifications
1.2.1 CO-119C-R10/P1301 Series
Model Name
CO-119C
Display
LCD Size
•19” (5:4)
Resolution
•1280 x 1024
Brightness
•350 cd/m2
Contract Ratio
•1000:1
LCD Color
•16.7M
Pixel Pitch
•0.294(H) x 0.294(V)
Viewing Angle
•170 (H) / 160 (V)
Backlight MTBF
•50,000 hrs (LED Backlight)
Touchscreen
Touchscreen Type
•Projected Capacitive Touch
Physical
Dimension (WxDxH)
•472.8 x 397.5 x 63 mm
Weight
•6.91KG
Construction
•One-piece and Slim Bezel Design
Mounting Type
•Flat / Standard / VESA / Rack Mount
Mounting Bracket
•Pre-installed Mounting Bracket with Adjustable Design
( Support 11 different stages of adjustment)
Protection
Ingress Protection
•Front Panel IP65 Compliant
* According to IEC60529
Environment
Operating Temperature
•0°C to 50°C (with Industrial Grade peripherals; Ambient with air flow)
Storage Temperature
•-20°C to 60°C
Humidity
•80% RH @ 50°C (non-condensing)
EMC
•CE, UKCA, FCC, ICES-003 Class A
EMI
•CISPR 32 Conducted & Radiated: Class A
•EN/BS EN 55032 Conducted & Radiated: Class A
•EN/BS EN IEC 61000-3-2 Harmonic current emissions: Class A
•EN/BS EN61000-3-3 Voltage fluctuations & flicker
•FCC 47 CFR Part 15B, ICES-003 Conducted & Radiated: Class A
EMS
•EN/IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
•EN/IEC 61000-4-3 RS: 80 MHz to 1000 MHz: 3 V/m
•EN/IEC 61000-4-4 EFT: AC Power: 1 kV; DC Power: 0.5 kV; Signal: 0.5 kV
•EN/IEC 61000-4-5 Surges: AC Power: 2 kV; Signal: 1 kV

CO-100/P1301 Series | User Manual 15
•EN/IEC 61000-4-6 CS: 3V
•EN/IEC 61000-4-8 PFMF: 50 Hz, 1A/m
•EN/IEC 61000-4-11 Voltage Dips & Voltage Interruptions: 0.5 cycles at 50 Hz
Model Name
P1301
System
Processor
•Onboard Intel® Alder Lake-N Series Processor:
- Intel® Processor N97 4 Cores Up to 3.60 GHz, TDP 12W
- Intel Atom® x7425E 4 Cores Up to 3.40 GHz, TDP 12W
Memory
•1x DDR5 4800MHz SO-DIMM Socket
Supports Un-buffered and Non-ECC Type, Up to 16GB
BIOS
•AMI BIOS
Graphics
Graphics Engine
•Integrated Intel® UHD Graphics
Maximum Display Output
•Supports Triple Independent Display
CDS
•1x CDS Connector (1920 x 1080 @ 60Hz)
DP
•1x DisplayPort Connector (4096 x 2304 @ 60Hz)
* Verified maximum resolution: 3840x2160 @ 60Hz
VGA
•1x VGA Connector (1920 x 1200 @60Hz)
Audio
Audio Codec
•Realtek® ALC888, High Definition Audio
Line-out
•1x Line-out, Phone Jack 3.5mm
Mic-in
•1x Mic-in, Phone Jack 3.5mm
I/O
LAN
•2x 2.5GbE LAN, RJ45
- GbE1 / GbE2: Intel® I225
COM
•2x RS-232/422/485 with Auto Flow Control Support 5V/12V, DB9
USB
•3x 10Gbps USB 3.2 Gen2x1, Type A
•1x 480Mbps USB 2.0, Type A
DIO
•8x Isolated DIO (4 in/4 out), 10-Pin Terminal Block
Storage
SSD/HDD
•1x 2.5” Front Accessible SATA HDD/SSD Bay
M.2 SSD
•1 x M.2 SSD Shared by M.2 Key B Socket
Expansion
M.2 Key B Socket
•1x M.2 Key B Type 3042/3052 Socket for 5G/Storage/Add-on Card Expansion
M.2 Key E Socket
•1x M.2 Key E Type 2230 Socket for Wireless/Intel CNVi Module Expansion
SIM Socket
•1x Front Accessible SIM Socket
CFM (Control Function Module)
•1x CFM Interface for optional IGN Module Expansion

CO-100/P1301 Series | User Manual 16
Interface
•1x CFM Interface for optional PoE Module Expansion
Other Function
Clear CMOS Switch
•1x Clear CMOS Switch
Reset Button
•1x Reset Button
Instant Reboot
•Support 0.2sec Instant Reboot Technology
Watchdog Timer
•Software Programmable Supports 256 Levels System Reset
OSD Button
•LCD On/Off, Brightness Up, Brightness Down
Internal Speaker
•AMP 2W + 2W
Status LED Indicator
•Power LED, HDD LED
Power
Power Button
•1x ATX Power On/Off Button
Power Mode Switch
•1x AT/ATX Mode Switch
Power Input
•9-48VDC, 3-pin Terminal Block
Remote Power On/Off
•1x Remote Power On/Off, 2-pin Terminal Block
Remote Power LED
•1x Remote Power LED, 2-pin Terminal Block
Operating System
Windows
•Windows® 10
Linux
•Supports by project
Physical
Dimension (W x D x H)
•204.5 x 149 x 46.5 mm
Weight Information
•1.57 KG
Mechanical Construction
•Extruded Aluminum with Heavy Duty Metal
Mounting
•Wall/ VESA/ CDS/ DIN Rail
Physical Design
•Fanless Design
•Jumper-less Design
Reliability & Protection
Reverse Power Input Protection
•Yes
Over Voltage Protection
•Protection Range: 51-58V
•Protection Type: shut down operating voltage, re-power on at the present level to recover
Over Current Protection
•15A
CMOS Battery Backup
•SuperCap Integrated for CMOS Battery Maintenance-free Operation
MTBF
•306,338 Hours - Database: Telcordia SR-332 Issue3, Method 1, Case 3
Environment
Operating Temperature
•-40°C to 70°C
* PassMark BurnInTest: 100% CPU, 2D/3D Graphics (without thermal throttling)
* With extended temperature peripherals; Ambient with air flow
* According to IEC60068-2-1, IEC60068-2-2, IEC60068-2-14
Storage Temperature
•-40°C to 70°C
Relative Humidity
•95%RH @ 70°C (non-Condensing)

CO-100/P1301 Series | User Manual 17
Shock
•Operating, 50 Grms, Half-sine 11 ms Duration (w/ SSD, according to IEC60068-2-27)
Vibration
•Operating, 1 Grms, 10-500 Hz, 3 Axes (w/ SSD, according to IEC60068-2-6)
•Operating, 5 Grms, 5-500 Hz, 3 Axes (w/ SSD, according to IEC60068-2-64)
EMC
•CE, UKCA, FCC, ICES-003 Class A
•EN61000-6-4, EN61000-6-2 @ DC-input 24V
EMI
•CISPR 32 Conducted & Radiated: Class A
•EN/BS EN 55032 Conducted & Radiated: Class A
•EN/BS EN IEC 61000-3-2 Harmonic current emissions: Class A
•EN/BS EN61000-3-3 Voltage fluctuations & flicker
•FCC 47 CFR Part 15B, ICES-003 Conducted & Radiated: Class A
EMS
•EN/IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
•EN/IEC 61000-4-3 RS: 80 MHz to 1000 MHz: 10 V/m
•EN/IEC 61000-4-4 EFT: AC Power: 2 kV; DC Power: 1 kV; Signal: 1 kV
•EN/IEC 61000-4-5 Surges: AC Power: 2 kV; Signal: 1 kV
•EN/IEC 61000-4-6 CS: 10V
(**Compliant with the standard when utilizing shielded ethernet cable.)
•EN/IEC 61000-4-8 PFMF: 50 Hz, 30A/m
•EN/IEC 61000-4-11 Voltage Dips & Voltage Interruptions: 1 cycles at 60 Hz
* Product Specifications and features are for reference only and are subject to change without prior
notice. For more information, please refer to the latest product datasheet from Cincoze's website.
Dimension
CO-119C/P1301 Unit: mm

CO-100/P1301 Series | User Manual 18
1.2.2 CO-W121C-R10/P1301 Series
Model Name
CO-W121C
Display
LCD Size
•21.5” (16:9)
Resolution
•1920 x 1080
Brightness
•300 cd/m2
Contract Ratio
•5000:1
LCD Color
•16.7M
Pixel Pitch
•0.24825(H) x 0.24825(V) mm
Viewing Angle
•178 (H) / 178 (V)
Backlight MTBF
•50,000 hrs
Touchscreen
Touchscreen Type
•Projected Capacitive Touch
Physical
Dimension (WxDxH)
•550 x 343.7 x 63.3
Weight
•7.16KG
Construction
•One-piece and Slim Bezel Design
Mounting Type
•Flat / Standard / VESA / Rack Mount
Mounting Bracket
•Pre-installed Mounting Bracket with Adjustable Design
( Support 11 different stages of adjustment)
Protection
Ingress Protection
•Front Panel IP65 Compliant
* According to IEC60529
Environment
Operating Temperature
•0°C to 60°C (with Industrial Grade peripherals; Ambient with air flow)
Storage Temperature
•-20°C to 60°C
Humidity
•80% RH @ 50°C (non-condensing)
EMC
•CE, UKCA, FCC, ICES-003 Class A
EMI
•CISPR 32 Conducted & Radiated: Class A
•EN/BS EN 55032 Conducted & Radiated: Class A
•EN/BS EN IEC 61000-3-2 Harmonic current emissions: Class A
•EN/BS EN61000-3-3 Voltage fluctuations & flicker
•FCC 47 CFR Part 15B, ICES-003 Conducted & Radiated: Class A
EMS
•EN/IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
•EN/IEC 61000-4-3 RS: 80 MHz to 1000 MHz: 3 V/m
•EN/IEC 61000-4-4 EFT: AC Power: 1 kV; DC Power: 0.5 kV; Signal: 0.5 kV
•EN/IEC 61000-4-5 Surges: AC Power: 2 kV; Signal: 1 kV
•EN/IEC 61000-4-6 CS: 3V
•EN/IEC 61000-4-8 PFMF: 50 Hz, 1A/m

CO-100/P1301 Series | User Manual 19
•EN/IEC 61000-4-11 Voltage Dips & Voltage Interruptions: 0.5 cycles at 50 Hz
Safety
•UL, cUL, CB, IEC, EN 62368-1
Model Name
P1301
System
Processor
•Onboard Intel® Alder Lake-N Series Processor:
- Intel® Processor N97 4 Cores Up to 3.60 GHz, TDP 12W
- Intel Atom® x7425E 4 Cores Up to 3.40 GHz, TDP 12W
Memory
•1x DDR5 4800MHz SO-DIMM Socket
Supports Un-buffered and Non-ECC Type, Up to 16GB
BIOS
•AMI BIOS
Graphics
Graphics Engine
•Integrated Intel® UHD Graphics
Maximum Display Output
•Supports Triple Independent Display
CDS
•1x CDS Connector (1920 x 1080 @ 60Hz)
DP
•1x DisplayPort Connector (4096 x 2304 @ 60Hz)
* Verified maximum resolution: 3840x2160 @ 60Hz
VGA
•1x VGA Connector (1920 x 1200 @60Hz)
Audio
Audio Codec
•Realtek® ALC888, High Definition Audio
Line-out
•1x Line-out, Phone Jack 3.5mm
Mic-in
•1x Mic-in, Phone Jack 3.5mm
I/O
LAN
•2x 2.5GbE LAN, RJ45
- GbE1 / GbE2: Intel® I225
COM
•2x RS-232/422/485 with Auto Flow Control Support 5V/12V, DB9
USB
•3x 10Gbps USB 3.2 Gen2x1, Type A
•1x 480Mbps USB 2.0, Type A
DIO
•8x Isolated DIO (4 in/4 out), 10-Pin Terminal Block
Storage
SSD/HDD
•1x 2.5” Front Accessible SATA HDD/SSD Bay
M.2 SSD
•1 x M.2 SSD Shared by M.2 Key B Socket
Expansion
M.2 Key B Socket
•1x M.2 Key B Type 3042/3052 Socket for 5G/Storage/Add-on Card Expansion
M.2 Key E Socket
•1x M.2 Key E Type 2230 Socket for Wireless/Intel CNVi Module Expansion
SIM Socket
•1x Front Accessible SIM Socket
CFM (Control Function Module)
Interface
•1x CFM Interface for optional IGN Module Expansion
•1x CFM Interface for optional PoE Module Expansion

CO-100/P1301 Series | User Manual 20
Other Function
Clear CMOS Switch
•1x Clear CMOS Switch
Reset Button
•1x Reset Button
Instant Reboot
•Support 0.2sec Instant Reboot Technology
Watchdog Timer
•Software Programmable Supports 256 Levels System Reset
OSD Button
•LCD On/Off, Brightness Up, Brightness Down
Internal Speaker
•AMP 2W + 2W
Status LED Indicator
•Power LED, HDD LED
Power
Power Button
•1x ATX Power On/Off Button
Power Mode Switch
•1x AT/ATX Mode Switch
Power Input
•9-48VDC, 3-pin Terminal Block
Remote Power On/Off
•1x Remote Power On/Off, 2-pin Terminal Block
Remote Power LED
•1x Remote Power LED, 2-pin Terminal Block
Operating System
Windows
•Windows® 10
Linux
•Supports by project
Physical
Dimension (W x D x H)
•204.5 x 149 x 46.5 mm
Weight Information
•1.57 KG
Mechanical Construction
•Extruded Aluminum with Heavy Duty Metal
Mounting
•Wall/ VESA/ CDS/ DIN Rail
Physical Design
•Fanless Design
•Jumper-less Design
Reliability & Protection
Reverse Power Input Protection
•Yes
Over Voltage Protection
•Protection Range: 51-58V
•Protection Type: shut down operating voltage, re-power on at the present level to recover
Over Current Protection
•15A
CMOS Battery Backup
•SuperCap Integrated for CMOS Battery Maintenance-free Operation
MTBF
•306,338 Hours - Database: Telcordia SR-332 Issue3, Method 1, Case 3
Environment
Operating Temperature
•-40°C to 70°C
* PassMark BurnInTest: 100% CPU, 2D/3D Graphics (without thermal throttling)
* With extended temperature peripherals; Ambient with air flow
* According to IEC60068-2-1, IEC60068-2-2, IEC60068-2-14
Storage Temperature
•-40°C to 70°C
Relative Humidity
•95%RH @ 70°C (non-Condensing)
Shock
•Operating, 50 Grms, Half-sine 11 ms Duration (w/ SSD, according to IEC60068-2-27)