Cincoze CO-119C/P1201 Series User manual

Open Frame Panel PC
CO-100/P1201 Series
User Manual
Version: V1.02
Open Frame Panel PC
TFT-LCD Open Frame Display Modular Panel PC with
Intel® Elkhart Lake Atom® x6000E Series Processor

CO-100/P1201 Series | User Manual 2
Contents
Preface ...................................................................................................................................................5
Revision..........................................................................................................................................5
Copyright Notice ............................................................................................................................5
Acknowledgement .........................................................................................................................5
Disclaimer.......................................................................................................................................5
Declaration of Conformity..............................................................................................................6
Product Warranty Statement.........................................................................................................6
Technical Support and Assistance..................................................................................................7
Conventions Used in this Manual ..................................................................................................8
Safety Precautions..........................................................................................................................8
Package Contents.........................................................................................................................10
Ordering Information...................................................................................................................10
Chapter 1 Product Introductions .........................................................................................................11
1.1 Overview ................................................................................................................................12
1.2 Highlights................................................................................................................................12
1.3 Key Features...........................................................................................................................13
1.4 Hardware Specification..........................................................................................................14
1.4.1 CO-119C/P1201 Series................................................................................................14
1.4.2 CO-W121C/P1201 Series.............................................................................................18
1.5 System I/O..............................................................................................................................22
1.5.1 Front............................................................................................................................22
1.5.2 Rear.............................................................................................................................22
1.5.3 Right ............................................................................................................................23
1.5.4 Left ..............................................................................................................................23
Chapter 2 Switches & Connectors........................................................................................................24
2.1 Location of Switches and Connectors....................................................................................25
2.1.1 Top View......................................................................................................................25
2.1.2 Bottom View ...............................................................................................................26
2.2 Switches and Connectors Definition......................................................................................27
2.3 Definition of Switches ............................................................................................................28
2.4 Definition of Connectors........................................................................................................30
Chapter 3 System Setup.......................................................................................................................34
3.1 Removing Top Cover...............................................................................................................35
3.2 Installing SO-DIMM Memory .................................................................................................36
3.3 Installing Mini-PCIe Card........................................................................................................37
3.4 Installing M.2 E Key Card........................................................................................................38
3.5 Installing Antenna(s) ..............................................................................................................39
3.6 Installing CPU Thermal Pad ....................................................................................................41
3.7 Installing Top Cover................................................................................................................42

CO-100/P1201 Series | User Manual 3
3.8 Installing SIM Card .................................................................................................................43
3.9 Disassembling Display Module ..............................................................................................44
3.10 Installing SATA Hard Drive....................................................................................................45
3.11 Installing Standard Mount....................................................................................................47
3.11.1 Fixing from front side................................................................................................48
3.11.2 Fixing from rear side .................................................................................................49
3.12 Installing Flat Mount ............................................................................................................50
3.12.1 Fixing from front side................................................................................................54
3.12.2 Fixing from rear side .................................................................................................54
3.13 Disassembling Mounting Brackets .......................................................................................56
Chapter 4 BIOS Setup...........................................................................................................................58
4.1 BIOS Introduction...................................................................................................................59
4.2 Main Setup.............................................................................................................................60
4.3 Advanced Setup .....................................................................................................................61
4.3.1 CPU Configuration.......................................................................................................61
4.3.2 SATA Configuration......................................................................................................62
4.3.3 PCH-FW Configuration ................................................................................................62
4.3.4 Trusted Computing Settings........................................................................................63
4.3.5 ACPI Settings ...............................................................................................................64
4.3.6 F81966 Super IO Configuration...................................................................................64
4.3.7 Hardware Monitor ......................................................................................................66
4.3.8 S5 RTC Wake Settings..................................................................................................66
4.3.9 Serial Port Console Redirection...................................................................................67
4.3.10 USB Configuration.....................................................................................................67
4.3.11 Network Stack Configuration....................................................................................68
4.4 Chipset Setup .........................................................................................................................69
4.4.1 System Agent (SA) Configuration................................................................................69
4.4.2 PCH-IO Configuration..................................................................................................70
4.5 Security Setup ........................................................................................................................72
4.6 Boot Setup..............................................................................................................................73
4.7 Save & Exit..............................................................................................................................74
Chapter 5 Product Application.............................................................................................................75
5.1 Digital I/O (DIO) application...................................................................................................76
5.1.1 Digital I/O Programming Guide...................................................................................76
5.2 Digital I/O (DIO) Hardware Specification ...............................................................................83
5.2.1 DIO Connector Definition............................................................................................83
Chapter 6 Optional Modules and Accessories.....................................................................................85
6.1 Pin Definition & Settings ........................................................................................................86
6.1.1 CFM-IGN101................................................................................................................86
6.2 Installing CFM Modules..........................................................................................................87
6.2.1 CFM-IGN101................................................................................................................87

CO-100/P1201 Series | User Manual 4
6.2.2 CFM-PoE02..................................................................................................................88
6.3Installing Accessories ..............................................................................................................90
6.3.1 VESA Mounting ...........................................................................................................90
6.3.2 URM01 ........................................................................................................................91

CO-100/P1201 Series | User Manual 5
Preface
Revision
Revision
Description
Date
1.00
First Release
2023/03/31
1.01
Correction Made
2023/05/04
1.02
Correction Made
2023/11/30
Copyright Notice
© 2023 by Cincoze Co., Ltd. All rights are reserved. No parts of this manual may be copied, modified,
or reproduced in any form or by any means for commercial use without the prior written permission
of Cincoze Co., Ltd. All information and specification provided in this manual are for reference only
and remain subject to change without prior notice.
Acknowledgement
Cincoze is a registered trademark of Cincoze Co., Ltd. All registered trademarks and product names
mentioned herein are used for identification purposes only and may be trademarks and/or
registered trademarks of their respective owners.
Disclaimer
This manual is intended to be used as a practical and informative guide only and is subject to
change without notice. It does not represent a commitment on the part of Cincoze. This product
might include unintentional technical or typographical errors. Changes are periodically made to the
information herein to correct such errors, and these changes are incorporated into new editions of
the publication.

CO-100/P1201 Series | User Manual 6
Declaration of Conformity
FCC
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.
CE
The product(s) described in this manual complies with all application European Union
(CE) directives if it has a CE marking. For computer systems to remain CE compliant,
only CE-compliant parts may be used. Maintaining CE compliance also requires
proper cable and cabling techniques.
Product Warranty Statement
Warranty
Cincoze products are warranted by Cincoze Co., Ltd. to be free from defect in materials and
workmanship for 2 years from the date of purchase by the original purchaser. During the warranty
period, we shall, at our option, either repair or replace any product that proves to be defective
under normal operation. Defects, malfunctions, or failures of the warranted product caused by
damage resulting from natural disasters (such as by lightening, flood, earthquake, etc.),
environmental and atmospheric disturbances, other external forces such as power line disturbances,
plugging the board in under power, or incorrect cabling, and damage caused by misuse, abuse, and
unauthorized alteration or repair, and the product in question is either software, or an expendable
item (such as a fuse, battery, etc.), are not warranted.
RMA
Before sending your product in, you will need to fill in Cincoze RMA Request Form and obtain an
RMA number from us. Our staff is available at any time to provide you with the most friendly and
immediate service.
◼RMA Instruction
⚫Customers must fill in Cincoze Return Merchandise Authorization (RMA) Request
Form and obtain an RMA number prior to returning a defective product to Cincoze
for service.
⚫Customers must collect all the information about the problems encountered and
note anything abnormal and describe the problems on the “Cincoze Service Form”
for the RMA number apply process.

CO-100/P1201 Series | User Manual 7
⚫Charges may be incurred for certain repairs. Cincoze will charge for repairs to
products whose warranty period has expired. Cincoze will also charge for repairs to
products if the damage resulted from acts of God, environmental or atmospheric
disturbances, or other external forces through misuse, abuse, or unauthorized
alteration or repair. If charges will be incurred for a repair, Cincoze lists all charges,
and will wait for customer’s approval before performing the repair.
⚫Customers agree to ensure the product or assume the risk of loss or damage during
transit, to prepay shipping charges, and to use the original shipping container or
equivalent.
⚫Customers can be sent back the faulty products with or without accessories (manuals,
cable, etc.) and any components from the system. If the components were suspected
as part of the problems, please note clearly which components are included.
Otherwise, Cincoze is not responsible for the devices/parts.
⚫Repaired items will be shipped along with a "Repair Report" detailing the findings
and actions taken.
Limitation of Liability
Cincoze’ liability arising out of the manufacture, sale, or supplying of the product and its use,
whether based on warranty, contract, negligence, product liability, or otherwise, shall not exceed
the original selling price of the product. The remedies provided herein are the customer’s sole and
exclusive remedies. In no event shall Cincoze be liable for direct, indirect, special or consequential
damages whether based on contract of any other legal theory.
Technical Support and Assistance
1. Visit the Cincoze website at www.cincoze.com where you can find the latest information about
the product.
2. Contact your distributor or our technical support team or sales representative for technical
support if you need additional assistance. Please have following information ready before you
call:
⚫Product name and serial number
⚫Description of your peripheral attachments
⚫Description of your software (operating system, version, application software, etc.)
⚫A complete description of the problem
⚫The exact wording of any error messages

CO-100/P1201 Series | User Manual 8
Conventions Used in this Manual
Safety Precautions
Before installing and using this device, please note the following precautions.
1. Read these safety instructions carefully.
2. Keep this User’s Manual for future reference.
3. Disconnected this equipment from any AC outlet before cleaning.
4. For plug-in equipment, the power outlet socket must be located near the equipment and must
be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping it or letting it fall may
cause damage.
7. Make sure the voltage of the power source is correct before connecting the equipment to the
power outlet.
8. Use a power cord that has been approved for using with the product and that it matches the
voltage and current marked on the product’s electrical range label. The voltage and current
rating of the cord must be greater than the voltage and current rating marked on the product.
9. Position the power cord so that people cannot step on it. Do not place anything over the
power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the power source to avoid
damage by transient overvoltage.
12. Never pour any liquid into an opening. This may cause fire or electrical shock.
This indication alerts operators to an operation that, if not strictly observed, may result in
severe injury.
(Cette indication avertit les opérateurs d'une opération qui, si elle n'est pas strictement
observée, peut entraîner des blessures graves.)
WARNING
(AVERTIR)
This indication alerts operators to an operation that, if not strictly observed, may result in
safety hazards to personnel or damage to equipment.
(Cette indication avertit les opérateurs d'une opération qui, si elle n'est pas strictement
observée, peut entraîner des risques pour la sécurité du personnel ou des dommages à
l'équipement.)
CAUTION
(ATTENTION)
This indication provides additional information to complete a task easily.
NOTE

CO-100/P1201 Series | User Manual 9
13. Never open the equipment. For safety reasons, the equipment should be opened only by
qualified service personnel.
If one of the following situations arises, get the equipment checked by service personnel:
⚫The power cord or plug is damaged.
⚫Liquid has penetrated into the equipment.
⚫The equipment has been exposed to moisture.
⚫The equipment does not work well, or you cannot get it work according to the user's
manual.
⚫The equipment has been dropped and damaged.
⚫The equipment has obvious signs of breakage.
14. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type recommended by the manufacturer.
15. Equipment intended only for use in a RESTRICTED ACCESS AREA.
16. Ensure to connect the power cord of power adapter to a socket-outlet with earthing
connection.
17. Dispose of used battery promptly. Keep away from children. Do not disassemble and do not
dispose of in fire.

CO-100/P1201 Series | User Manual 10
Package Contents
Before installation, please ensure all the items listed in the following table are included in the
package.
Item
Description
Q’ty
1
CO-100/P1201 Series Panel PC
1
2
Thermal Pad (for CPU Thermal Block)
1
3
DIO Terminal Block Connector (Female)
1
4
Power Terminal Block Connector (Female)
1
5
Screw Pack
1
6
Remote Power On/Off Terminal Block Connector
1
Note: Notify your sales representative if any of the above items are missing or damaged.
Ordering Information
Model No.
Product Description
CO-119C-R10/P1201-X6425E-R10
19“TFT-LCD SXGA 5:4 Open Frame Display Modular Panel
PC with Intel Atom x6425E Quad Core Processor
CO-119C-R10/P1201-X6211E-R10
19“TFT-LCD SXGA 5:4 Open Frame Display Modular Panel
PC with Intel Atom x6211E Dual Core Processor
CO-W121C-R10/P1201-X6425E-R10
21.5" TFT-LCD Full HD 16:9 Open Frame Panel PC with
Intel Atom x6425E Quad Core Processor
CO-W121C-R10/P1201-X6211E-R10
21.5" TFT-LCD Full HD 16:9 Open Frame Panel PC with
Intel Atom x6211E Dual Core Processor

CO-100/P1201 Series | User Manual 11
Chapter 1
Product Introductions

CO-100/P1201 Series | User Manual 12
1.1 Overview
The CO-100/P1201 is an open-frame panel PC with an Intel® Atom® (Elkhart Lake) processor, rich native I/O
interfaces (GbE LAN, USB 3.2, COM, and DIO), expansion slots (Mini PCIe and M.2 Key E Type 2230), and CFM
(to add PoE and IGN). The major highlight, especially for equipment manufacturers, is the exclusive
adjustable mounting bracket (patent pending) that provides thickness adjustment and two panel-locking
methods that make installation more convenient and reduce the need for customization during integration.
The design fits cabinets of different materials and thicknesses for consistency and its robust design takes into
account the requirements of HMI in harsh industrial environments.
1.2 Highlights

CO-100/P1201 Series | User Manual 13
1.3 Key Features
⚫TFT-LCD with Projected Capacitive Touch
⚫Intel® Elkhart Lake Atom® x6425E/x6211E Processor
⚫1x DDR4 SO-DIMM
⚫Designed with Adjustable Mounting Bracket
⚫Support Flat / Standard / VESA / Rack Mount
⚫Front Panel IP65 Compliant
⚫Wide Operating Temperature
⚫Cincoze Patent CDS Technology Support

CO-100/P1201 Series | User Manual 14
1.4 Hardware Specification
1.4.1 CO-119C/P1201 Series
Model Name
CO-119C
Display
LCD Size
•19” (5:4)
Resolution
•1280 x 1024
Brightness
•350 cd/m2
Contract Ratio
•1000:1
LCD Color
•16.7M
Pixel Pitch
•0.294(H) x 0.294(V)
Viewing Angle
•170 (H) / 160 (V)
Backlight MTBF
•50,000 hrs (LED Backlight)
Touchscreen
Touchscreen Type
•Projected Capacitive Touch
Physical
Dimension (WxDxH)
•472.8 x 397.5 x 63 mm
Weight
•6.91KG
Construction
•One-piece and Slim Bezel Design
Mounting Type
•Flat / Standard / VESA / Rack Mount
Mounting Bracket
•Pre-installed Mounting Bracket with Adjustable Design
( Support 11 different stages of adjustment)
Protection
Ingress Protection
•Front Panel IP65 Compliant
* According to IEC60529
Environment
Operating Temperature
•0°C to 50°C (with Industrial Grade peripherals; Ambient with air flow)
Storage Temperature
•-20°C to 60°C
Humidity
•80% RH @ 50°C (non-condensing)
EMC
•CE, UKCA, FCC, ICES-003 Class A
EMI
•CISPR 32 Conducted & Radiated: Class A
•EN/BS EN 55032 Conducted & Radiated: Class A
•EN/BS EN IEC 61000-3-2 Harmonic current emissions: Class A
•EN/BS EN61000-3-3 Voltage fluctuations & flicker
•FCC 47 CFR Part 15B, ICES-003 Conducted & Radiated: Class A
EMS
•EN/IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
•EN/IEC 61000-4-3 RS: 80 MHz to 1000 MHz: 3 V/m
•EN/IEC 61000-4-4 EFT: AC Power: 1 kV; DC Power: 0.5 kV; Signal: 0.5 kV
•EN/IEC 61000-4-5 Surges: AC Power: 2 kV; Signal: 1 kV

CO-100/P1201 Series | User Manual 15
•EN/IEC 61000-4-6 CS: 3V
•EN/IEC 61000-4-8 PFMF: 50 Hz, 1A/m
•EN/IEC 61000-4-11 Voltage Dips & Voltage Interruptions: 0.5 cycles at 50 Hz
Model Name
P1201
System
Processor
•Intel® Atom® x6425E Processor (1.5M Cache, up to 3.00 GHz, 12W)
•Intel® Atom® x6211E Processor (1.5M Cache, up to 3.00 GHz, 6W)
Memory
•1x DDR4 SO-DIMM Socket
•Supports DDR4 3200MHz Memory Up to 32GB (un-buffered and non-ECC)
BIOS
•AMI BIOS
Graphics
Graphics Engine
•Integrated Intel® UHD Graphics
Maximum Display Output
•Supports Triple Independent Display
CDS
•1x CDS Connector (1920 x 1080 @ 60Hz)
DP
•1x DisplayPort Connector (4096 x 2304 @ 60Hz, According to CPU Specifications)
* Verified maximum resolution: 3840x2160 @ 60Hz
VGA
•1x VGA Connector (1920 x 1200 @60Hz)
Audio
Audio Codec
•Realtek® ALC888, High Definition Audio
Line-out
•1x Line-out, Phone Jack 3.5mm
Mic-in
•1x Mic-in, Phone Jack 3.5mm
I/O
LAN
•2x GbE LAN, RJ45
- GbE1: Intel® I210
- GbE2: Intel® I210
COM
•3x RS-232/422/485 with Auto Flow Control, DB9
USB
•3x 10Gbps USB 3.2 Gen2, Type A
•1x 480Mbps USB 2.0, Type A
DIO
•8x Isolated DIO (4x DI/4x DO), 10-Pin Terminal Block
Storage
SSD/HDD
•1x 2.5” Front Accessible SATA HDD/SSD Drive Bay (SATA 3.0)
mSATA
•1x mSATA Socket (SATA 3.0, shared by Mini-PCIe socket)
Expansion
Mini PCI Express
•1x Full-size Mini-PCIe Socket
SIM Socket
•1x SIM Socket
M.2
•1x M.2 Key E 2230 Socket, Support Wireless Module
CFM (Control Function Module)
•1x CFM IGN Interface for optional CFM-IGN Module Expansion

CO-100/P1201 Series | User Manual 16
Interface
•1x CFM PoE Interface for optional CFM-PoE Module Expansion
CDS (Convertible Display
System) Interface
•1x CDS Interface for Convertible Display Module
Other Function
Clear CMOS Switch
•1x Clear CMOS Switch
Reset Button
•1x Reset Button
Instant Reboot
•Support 0.2sec Instant Reboot Technology
Watchdog Timer
•Software Programmable Supports 256 Levels System Reset
OSD Button
•LCD On/Off, Brightness Up, Brightness Down
Internal Speaker
•AMP 2W + 2W
Status LED Indicator
•Power LED, HDD LED, Temperature LED
Power
Power Button
•1x ATX Power On/Off Button
Power Mode Switch
•1x AT/ATX Mode Switch
Power Input
•9-48VDC, 3-pin Terminal Block
Remote Power On/Off
•1x Remote Power On/Off, 2-pin Terminal Block
Remote Power LED
•1x Remote Power LED, 2-pin Terminal Block
Operating System
Windows
•Windows® 10
Linux
•Supports by project
Physical
Dimension (W x D x H)
•204.5 x 149 x 41.5 mm
Weight Information
•1.54 KG
Mechanical Construction
•Extruded Aluminum with Heavy Duty Metal
Mounting
•Wall/ VESA/ CDS/ DIN Rail
Physical Design
•Fanless Design
•Jumper-less Design
Reliability & Protection
Reverse Power Input Protection
•Yes
Over Voltage Protection
•Protection Range: 51-58V
•Protection Type: shut down operating voltage, re-power on at the present level to recover
Over Current Protection
•15A
CMOS Battery Backup
•SuperCap Integrated for CMOS Battery Maintenance-free Operation
MTBF
•283,091 Hours - Database: Telcordia SR-332 Issue3, Method 1, Case 3
Environment
Operating Temperature
•-40°C to 70°C
* PassMark BurnInTest: 100% CPU, 2D/3D Graphics (without thermal throttling)
* With extended temperature peripherals; Ambient with air flow
* According to IEC60068-2-1, IEC60068-2-2, IEC60068-2-14
Storage Temperature
•-40°C to 85°C

CO-100/P1201 Series | User Manual 17
Relative Humidity
•95%RH @ 70°C (non-Condensing)
Shock
•Operating, 50 Grms (w/ SSD, according to IEC60068-2-27)
Vibration
•Operating, 5 Grms, 5-500 Hz, 3 Axes (w/ SSD, according to IEC60068-2-64)
•Operating, 1 Grms, 10-500 Hz, 3 Axes (w/ SSD, according to IEC60068-2-6)
EMC
•CE, UKCA, FCC, ICES-003 Class A
•EN61000-6-4, EN61000-6-2 (24VDC Input Only)
EMI
•CISPR 32 Conducted & Radiated: Class A
•EN/BS EN 55032 Conducted & Radiated: Class A
•EN/BS EN IEC 61000-3-2 Harmonic current emissions: Class A
•EN/BS EN61000-3-3 Voltage fluctuations & flicker
•FCC 47 CFR Part 15B, ICES-003 Conducted & Radiated: Class A
EMS
•EN/IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
•EN/IEC 61000-4-3 RS: 80 MHz to 1000 MHz: 3 V/m
•EN/IEC 61000-4-4 EFT: AC Power: 1 kV; DC Power: 0.5 kV; Signal: 0.5 kV
•EN/IEC 61000-4-5 Surges: AC Power: 2 kV; Signal: 1 kV
•EN/IEC 61000-4-6 CS: 3V
•EN/IEC 61000-4-8 PFMF: 50 Hz, 1A/m
•EN/IEC 61000-4-11 Voltage Dips & Voltage Interruptions: 0.5 cycles at 50 Hz
Safety
•UL, cUL, CB, IEC/ EN 62368-1
* Product Specifications and features are for reference only and are subject to change without prior
notice. For more information, please refer to the latest product datasheet from Cincoze's website.
Dimension
CO-119C/P1201 Unit: mm

CO-100/P1201 Series | User Manual 18
1.4.2 CO-W121C/P1201 Series
Model Name
CO-W121C
Display
LCD Size
•21.5” (16:9)
Resolution
•1920 x 1080
Brightness
•300 cd/m2
Contract Ratio
•5000:1
LCD Color
•16.7M
Pixel Pitch
•0.24825(H) x 0.24825(V) mm
Viewing Angle
•178 (H) / 178 (V)
Backlight MTBF
•50,000 hrs
Touchscreen
Touchscreen Type
•Projected Capacitive Touch
Physical
Dimension (WxDxH)
•550 x 343.7 x 63.3
Weight
•7.16KG
Construction
•One-piece and Slim Bezel Design
Mounting Type
•Flat / Standard / VESA / Rack Mount
Mounting Bracket
•Pre-installed Mounting Bracket with Adjustable Design
( Support 11 different stages of adjustment)
Protection
Ingress Protection
•Front Panel IP65 Compliant
* According to IEC60529
Environment
Operating Temperature
•0°C to 60°C (with Industrial Grade peripherals; Ambient with air flow)
Storage Temperature
•-20°C to 60°C
Humidity
•80% RH @ 50°C (non-condensing)
EMC
•CE, UKCA, FCC, ICES-003 Class A
EMI
•CISPR 32 Conducted & Radiated: Class A
•EN/BS EN 55032 Conducted & Radiated: Class A
•EN/BS EN IEC 61000-3-2 Harmonic current emissions: Class A
•EN/BS EN61000-3-3 Voltage fluctuations & flicker
•FCC 47 CFR Part 15B, ICES-003 Conducted & Radiated: Class A
EMS
•EN/IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
•EN/IEC 61000-4-3 RS: 80 MHz to 1000 MHz: 3 V/m
•EN/IEC 61000-4-4 EFT: AC Power: 1 kV; DC Power: 0.5 kV; Signal: 0.5 kV
•EN/IEC 61000-4-5 Surges: AC Power: 2 kV; Signal: 1 kV
•EN/IEC 61000-4-6 CS: 3V
•EN/IEC 61000-4-8 PFMF: 50 Hz, 1A/m
•EN/IEC 61000-4-11 Voltage Dips & Voltage Interruptions: 0.5 cycles at 50 Hz

CO-100/P1201 Series | User Manual 19
Safety
•UL, cUL, CB, IEC, EN 62368-1
Model Name
P1201
System
Processor
•Intel® Atom® x6425E Processor (1.5M Cache, up to 3.00 GHz, 12W)
•Intel® Atom® x6211E Processor (1.5M Cache, up to 3.00 GHz, 6W)
Memory
•1x DDR4 SO-DIMM Socket
•Supports DDR4 3200MHz Memory Up to 32GB (un-buffered and non-ECC)
BIOS
•AMI BIOS
Graphics
Graphics Engine
•Integrated Intel® UHD Graphics
Maximum Display Output
•Supports Triple Independent Display
CDS
•1x CDS Connector (1920 x 1080 @ 60Hz)
DP
•1x DisplayPort Connector (4096 x 2304 @ 60Hz, According to CPU Specifications)
* Verified maximum resolution: 3840x2160 @ 60Hz
VGA
•1x VGA Connector (1920 x 1200 @60Hz)
Audio
Audio Codec
•Realtek® ALC888, High Definition Audio
Line-out
•1x Line-out, Phone Jack 3.5mm
Mic-in
•1x Mic-in, Phone Jack 3.5mm
I/O
LAN
•2x GbE LAN, RJ45
- GbE1: Intel® I210
- GbE2: Intel® I210
COM
•3x RS-232/422/485 with Auto Flow Control, DB9
USB
•3x 10Gbps USB 3.2 Gen2, Type A
•1x 480Mbps USB 2.0, Type A
DIO
•8x Isolated DIO (4x DI/4x DO), 10-Pin Terminal Block
Storage
SSD/HDD
•1x 2.5” Front Accessible SATA HDD/SSD Drive Bay (SATA 3.0)
mSATA
•1x mSATA Socket (SATA 3.0, shared by Mini-PCIe socket)
Expansion
Mini PCI Express
•1x Full-size Mini-PCIe Socket
SIM Socket
•1x SIM Socket
M.2
•1x M.2 Key E 2230 Socket, Support Wireless Module
CFM (Control Function Module)
Interface
•1x CFM IGN Interface for optional CFM-IGN Module Expansion
•1x CFM PoE Interface for optional CFM-PoE Module Expansion
CDS (Convertible Display
System) Interface
•1x CDS Interface for Convertible Display Module

CO-100/P1201 Series | User Manual 20
Other Function
Clear CMOS Switch
•1x Clear CMOS Switch
Reset Button
•1x Reset Button
Instant Reboot
•Support 0.2sec Instant Reboot Technology
Watchdog Timer
•Software Programmable Supports 256 Levels System Reset
OSD Button
•LCD On/Off, Brightness Up, Brightness Down
Internal Speaker
•AMP 2W + 2W
Status LED Indicator
•Power LED, HDD LED, Temperature LED
Power
Power Button
•1x ATX Power On/Off Button
Power Mode Switch
•1x AT/ATX Mode Switch
Power Input
•9-48VDC, 3-pin Terminal Block
Remote Power On/Off
•1x Remote Power On/Off, 2-pin Terminal Block
Remote Power LED
•1x Remote Power LED, 2-pin Terminal Block
Operating System
Windows
•Windows® 10
Linux
•Supports by project
Physical
Dimension (W x D x H)
•204.5 x 149 x 41.5 mm
Weight Information
•1.54 KG
Mechanical Construction
•Extruded Aluminum with Heavy Duty Metal
Mounting
•Wall/ VESA/ CDS/ DIN Rail
Physical Design
•Fanless Design
•Jumper-less Design
Reliability & Protection
Reverse Power Input Protection
•Yes
Over Voltage Protection
•Protection Range: 51-58V
•Protection Type: shut down operating voltage, re-power on at the present level to recover
Over Current Protection
•15A
CMOS Battery Backup
•SuperCap Integrated for CMOS Battery Maintenance-free Operation
MTBF
•283,091 Hours - Database: Telcordia SR-332 Issue3, Method 1, Case 3
Environment
Operating Temperature
•-40°C to 70°C
* PassMark BurnInTest: 100% CPU, 2D/3D Graphics (without thermal throttling)
* With extended temperature peripherals; Ambient with air flow
* According to IEC60068-2-1, IEC60068-2-2, IEC60068-2-14
Storage Temperature
•-40°C to 85°C
Relative Humidity
•95%RH @ 70°C (non-Condensing)
Shock
•Operating, 50 Grms (w/ SSD, according to IEC60068-2-27)
Vibration
•Operating, 5 Grms, 5-500 Hz, 3 Axes (w/ SSD, according to IEC60068-2-64)