Cisco 800 Series How to use

Corporate Headquarters: Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Copyright © 2002. Cisco Systems, Inc. All rights reserved. 78-12776-04
Release Notes for the Cisco 800 Series Routers
for Cisco IOS Release 12.1(5)YC
March 25, 2002
These release notes describe new features and significant software components for the Cisco 800 Series
Routers that support Cisco IOS Release 12.1(5)YC3. These release notes are updated as needed to
describe new memory requirements, new features, new hardware support, software platform deferrals,
microcode or modem code changes, related document changes, and any other important changes. Use
these release notes with the Cross-Platform Release Notes for Cisco IOS Release 12.1 located on
Cisco.com and the Documentation CD-ROM.
For a list of the software caveats that apply to Release 12.1(5)YC3, refer to the section “Caveats” and
to the online Caveats for Cisco IOS Release 12.1 T document. The caveats document is updated for
every 12.1 T maintenance release and is located on Cisco.com and the Documentation CD-ROM.
Contents
These Release Notes describe the following topics:
•System Requirements, page 2
•New and Changed Information, page 10
•Limitations and Restrictions, page 15
•Important Notes, page 18
•Caveats, page 23
•Documentation Updates
•Related Documentation, page 25
•Obtaining Documentation, page 34
•Obtaining Technical Assistance, page 35

2
Release Notes for the Cisco 800 Series Routers for Cisco IOS Release 12.1(5)YC
78-12776-04
System Requirements
System Requirements
This section describes the system requirements for Cisco IOS Release 12.1(5)YC3 and includes the
following sections:
•Memory Requirements, page 2
•Hardware Supported, page 3
•Determining Your Software Release, page 4
•Upgrading to a New Software Release, page 4
•Feature Set Tables, page 4
Memory Requirements
Table 1 Memory Requirements for the Cisco 800 Series Routers
Platforms Image Name Image
Required
Flash
Memory
Required
DRAM
Memory
Runs
From
Cisco 811
and 813
Routers
IP c800-y6-mw 8 MB 8 MB RAM
IP Plus c800-sy6-mw 8 MB 8 MB RAM
IP/IPX Plus c800-nsy6-mw 8 MB 8 MB RAM
IP/FW c800-oy6-mw 8 MB 8 MB RAM
IP/FW Plus IPSec c800-osy656i-mw 8 MB 12 MB RAM
IP/IPX/FW Plus IPSec c800-nosy656i-mw 8 MB 12 MB RAM
IP/FW/Plus IPSec 3DES c800-k2osy6-mw 8 MB 12 MB RAM
IP/IPX/FW/Plus IPSec 3DES c800-k2nosy6-mw 8 MB 12 MB RAM
Cisco 827
and Cisco
827_4V
Routers
Cisco 820 Series IOS IP c820-y6-mz 8 MB 16 MB RAM
Cisco 820 Series IOS IP/Voice c820-v6y6-mz 8 MB 24 MB RAM
Cisco 820 Series IOS IP/FW
Plus IPSec 56
c820-osy656i-mz 8 MB 24 MB RAM
Cisco 820 Series IOS
IP/FW/Voice Plus IPSec 56
c820-osv6y656i-mz 8 MB 24 MB RAM
Cisco 820 Series IOS
IP/IPX/Voice Plus
c820-nsv6y6-mz 8 MB 24 MB RAM
Cisco 820 Series IOS IP/FW
Plus IPSec 3DES
c820-k2osy6-mz 8 MB 24 MB RAM
Cisco 820 Series IOS
IP/IPX/FW Plus IPSec 3DES
c820-k2nosy6-mz 8 MB 24 MB RAM
Cisco 820 Series IOS
IP/IPX/FW/Voice Plus IPSec
3DES
c820-k2nosv6y6-mz 8 MB 24 MB RAM

3
Release Notes for the Cisco 800 Series Routers for Cisco IOS Release 12.1(5)YC
78-12776-04
System Requirements
Hardware Supported
Cisco IOS Release 12.1(5)YC3 supports the following Cisco 800 series routers:
•Cisco 811 and Cisco 813
•Cisco 827 and Cisco 827-4V
For detailed descriptions of new hardware features, see New and Changed Information, page 10.
Cisco 811 and 813 Routers
The Cisco 811 and 813 Routers provide the following key hardware features:
•Flash memory: Default is 8 MB and is expandable to 12 MB. Additional Flash memory is installed
using Intel “Mini-Card” technology.
•Dynamic RAM: Default is 8 MB and is expandable to 16 MB, which must be obtained from
Cisco Systems.
•The central processing unit is a 33 MHz MPC 850 processor.
•Routers mounted on a wall.
Table 2 lists the supported interfaces for the Cisco 811 and 813 routers.
Cisco 827 and Cisco 827-4V Routers
The Cisco 827 and Cisco 827-4V Routers provide the following key hardware features:
•The routers provide connection to an ADSL network or telephones and fax machines through an
ADSL port.
•Flash memory: Default is 12 MB and is expandable to 20 MB. If 12 MB of Flash is installed, 8 MB
is used for the Cisco IOS images and 4 MB hosts the ROMMON and NVRAM. Additional memory
can be added using Flash cards.
•Cisco 827 Router Dynamic RAM: Default is 16 MB of DRAM and is expandable to 32 MB.
•Cisco 827-4V Router Dynamic RAM: Default is 24 MB and is expandable to 32 MB. The Cisco
827-4V Router also contains an 8-MB DIMM card.
•The central processing unit is a 50 MHz MPC 855T RISC processor.
•Color-coded ports and cable reduce the chance of cabling errors.
•Routers can be stacked or mounted on a wall.
•The routers provide locking power connectors and a Kensington-compatible locking slot.
Table 2 Supported Interfaces for the Cisco 811 and 813 Routers
Router Ethernet LAN Ports Ethernet WAN Ports
Analog Phone
Ports
Console
Ports
Cisco 811 One 10BaseT (RJ-45) •One ISDN BRI U,
integrated DSU (RJ-11),
•One ISDN BRI S/T (R-J45)
–RJ-45
Cisco 813 One 10BaseT (RJ-45)
4-port hub
•One ISDN BRI U,
integrated DSU (RJ-11),
•One ISDN BRI S/T (R-J45)
Two (RJ-11) RJ-45

4
Release Notes for the Cisco 800 Series Routers for Cisco IOS Release 12.1(5)YC
78-12776-04
System Requirements
Table 3 lists the supported interfaces for the Cisco 827 and Cisco 827-4V routers.
Determining Your Software Release
To determine the version of Cisco IOS software running on your Cisco 800 series router, log in to the
router and enter the show version EXEC command:
router> show version
Cisco Internetwork Operating System Software
IOS (tm) 800 Software (C800-Y6-MW), Version 12.1(5)YC2, RELEASE SOFTWARE
Upgrading to a New Software Release
For general information about upgrading to a new software release, see Cisco IOS Upgrade Ordering
Instructions located at:
http://www.cisco.com/warp/public/cc/cisco/mkt/ios/prodlit/957_pp.htm
Feature Set Tables
The Cisco IOS software is packaged in feature sets consisting of software images—depending on the
platform. Each feature set contains a specific set of Cisco IOS features. Release 12.1(5)YC3 supports
the same feature sets as Releases 12.1 and 12.1 T, but Release 12.1(5)YC3 can include new features
supported by the Cisco 800 Series Routers. Table 4 lists the feature sets supported by the Cisco 800 Series
Routers.
Table 3 Supported Interfaces for the Cisco 827 and Cisco 827-4V Routers
Router Ethernet Ports ADSL Ports Telephone Ports Console Ports
Cisco 827 One 10BaseT (RJ-45) RJ-11 – RJ-45
Cisco 827-4V One 10BaseT (RJ-45) RJ-11 Four (RJ-11) RJ-45
Table 4 Feature Sets Supported by the Cisco 800 Series Routers
Image Name Feature Set Matrix Terms Software Image Platform
Cisco 800 Series IOS IP IP c800-y6-mw Cisco 811 and
813 routers
Cisco 800 Series IOS IP Plus IP, Plus c800-sy6-mw
Cisco 800 Series IOS IP/FW IP, FW c800-oy6-mw
Cisco 800 Series IOS IP/FW Plus IPSec 56 IP, FW, Plus, IPSec 56 c800-osy656i-mw
Cisco 800 Series IOS IP/IPX Plus IP, IPX, Plus c800-nsy6-mw
Cisco 800 Series IOS IP/IPX/FW Plus IPSec 56 IP, IPX, FW, Plus, IPSec 56 c800-nosy656i-mw
Cisco 800 Series IOS IP/FW Plus IPSec 3DES IP, FW, Plus, IPSec, 3DES c800-k2osy6-mw
Cisco 800 Series IOS IP/IPX/FW Plus IPSec 3DES IP, IPX, FW, Plus, IPSec,
3DES
c800-k2nosy6-mw

5
Release Notes for the Cisco 800 Series Routers for Cisco IOS Release 12.1(5)YC
78-12776-04
System Requirements
Table 5 lists the features and feature sets supported by the Cisco 811 and 813 Routers in Cisco IOS
Release 12.1(5)YC3. Table 6 lists the features and feature sets supported by the Cisco 827 and Cisco
827-4V Routers in Cisco IOS Release 12.1(5)YC3. The tables use the following conventions:
•Yes—The feature is supported in the software image.
•No—The feature is not supported in the software image.
Note These feature set tables only contain a selected list of features. These tables are not
cumulative—nor do they list all the features in each image.
Cisco 820 Series IOS IP IP c820-y6-mz Cisco 827 and
Cisco 827-4V
routers
Cisco 820 Series IOS IP/Voice IP, Voice c820-v6y6-mz
Cisco 820 Series IOS IP/FW Plus IPSec 56 IP, FW, Plus, IPSec 56 c820-osy656i-mz
Cisco 820 Series IOS IP/FW/Voice Plus IPSec 56 IP, FW, Voice, Plus, IPSec 56 c820-osv6y656i-mz
Cisco 820 Series IOS IP/IPX/Voice Plus IP, IPX, Voice, Plus c820-nsv6y6-mz
Cisco 820 Series IOS IP/FW Plus IPSec 3DES IP, FW, Plus, IPSec, 3DES c820-k2osy6-mz
Cisco 820 Series IOS IP/IPX/FW Plus IPSec 3DES IP, IPX, FW, Plus, IPSec,
3DES
c820-k2nosy6-mz
Cisco 820 Series IOS IP/IPX/FW/Voice Plus IPSec
3DES
IP, IPX, FW, Voice, Plus,
IPSec, 3DES c820-k2nosv6y6-mz
Table 4 Feature Sets Supported by the Cisco 800 Series Routers (continued)
Image Name Feature Set Matrix Terms Software Image Platform
Table 5 Feature List by Feature Set for the Cisco 811 and 813 Routers
Feature Sets
Features In IP
IP
Plus
IP/IPX
Plus IP/FW
IP/FW
Plus
IPSec 56
IP/FW/
IPX/Plus
IPSec 56
IP/FW/
Plus
IPSec
3DES
IP/FW/
IPX/Plus
IPSec
3DES
Address Conservation
NAT Yes Yes Yes Yes Yes Yes Ye s Yes
Ease of Use and Deployment
Aut o SPID / S WITCH Co n nect i o n Yes Yes Yes Yes Yes Yes Ye s Yes
Cisco Fast Step Software, Version
2.5
Yes Yes Yes Yes Yes Yes Ye s Yes
Configuration Express Yes Yes Yes Yes Yes Yes Yes Yes
Easy IP Phase I and II Yes Yes Yes Yes Yes Yes Yes Yes
TF T P C l i ent Server Yes Yes Yes Yes Yes Yes Ye s Yes
INS 64 Telephone Features (813 model only)
Cal l B l o ckin g on C a ller ID Yes Yes Yes Yes Yes Yes Ye s Yes
Cal ler ID Yes Yes Yes Yes Yes Yes Ye s Yes

6
Release Notes for the Cisco 800 Series Routers for Cisco IOS Release 12.1(5)YC
78-12776-04
System Requirements
Cal l Wa iting Yes Yes Yes Yes Yes Yes Ye s Ye s
Dis tinc t ive Ringin g Yes Yes Yes Yes Yes Yes Ye s Ye s
E Ya Yo Yes Yes Yes Yes Yes Yes Ye s Ye s
I Numb e r Yes Yes Yes Yes Yes Yes Ye s Ye s
IS D N Voi c e P r iori t y Yes Yes Yes Yes Yes Yes Ye s Ye s
Nar iwa ke Yes Yes Yes Yes Yes Yes Yes Ye s
Troublesome Call Refusing Yes Yes Yes Yes Yes Yes Yes Yes
Voice Warp Yes Yes Yes Yes Yes Yes Ye s Ye s
Voice Warp Select Yes Yes Yes Yes Yes Yes Yes Yes
LAN
IP Yes Yes Yes Yes Yes Yes Ye s Ye s
IPX NoNoYes No No Yes No Yes
NetBIOS Access Lists, Name
Caching
Yes Yes Yes Yes Yes Yes Ye s Ye s
Transp a r ent Brid g ing Yes Yes Yes Yes Yes Yes Ye s Ye s
Management
CiscoView Yes Yes Yes Yes Yes Yes Yes Yes
SN M P, Te lnet, Conso l e Port Yes Yes Yes Yes Yes Yes Ye s Ye s
SN T P Yes Yes Yes Yes Yes Yes Ye s Ye s
Sy s log Yes Yes Yes Yes Yes Yes Ye s Ye s
TACACS + No Yes Yes No Yes Ye s Yes Yes
Routing
IP En hanc e d I G R P No Yes Yes No Yes Ye s Yes Yes
IP Multicast (Relay Only) No Yes Yes No Yes Yes Yes Yes
IP-Policy Routing Yes Yes Yes Yes Yes Yes Yes Yes
IPX WAN No No Yes No No Yes No Yes
RIP, RIPv2, Triggered RIP Yes Yes Yes Yes Yes Yes Yes Yes
Security (Basic)
GRE Tu nnelin g No Yes Yes No Yes Ye s Yes Yes
NAT Yes Yes Yes Yes Yes Yes Yes Yes
PAP, CHAP, Local Password,
MSCHAP
Yes Yes Yes Yes Yes Yes Ye s Ye s
Table 5 Feature List by Feature Set for the Cisco 811 and 813 Routers (continued)
Feature Sets
Features In IP
IP
Plus
IP/IPX
Plus IP/FW
IP/FW
Plus
IPSec 56
IP/FW/
IPX/Plus
IPSec 56
IP/FW/
Plus
IPSec
3DES
IP/FW/
IPX/Plus
IPSec
3DES

7
Release Notes for the Cisco 800 Series Routers for Cisco IOS Release 12.1(5)YC
78-12776-04
System Requirements
Route and Router Authentication Yes Yes Yes Yes Yes Yes Yes Yes
To ken Car d Au then t icati o n Yes Ye s Ye s Yes Yes Ye s Ye s Yes
Security (Enhanced)
Cisco IOS Firewall No No No Yes Yes Yes Yes Yes
Context Based Access Control Lists No No No Yes Yes Yes Yes Yes
Denial of Service Detection No No No Yes Yes Yes Yes Yes
IPSec Encryption w/ 56-bit DES No No No No Yes Yes Yes Yes
Java Blocking No No No Yes Yes Yes Yes Yes
Real-time Alerts No No No Yes Yes Yes Yes Yes
Voice Features (Supplementary)
Call Conference Yes Yes Yes Yes Yes Yes Yes Yes
Call Hold / Retrieve Yes Yes Yes Yes Yes Yes Yes Yes
Cal l Trans f er Yes Yes Yes Yes Yes Yes Ye s Yes
Voice Prio r i ty Yes Yes Yes Yes Yes Yes Ye s Yes
Intercom (5)YC Yes Yes Yes Yes Yes Yes Yes Yes
Redial (5)YC Yes Yes Yes Yes Yes Yes Yes Yes
Local Call Transfer (5)YC Yes Yes Yes Yes Yes Yes Yes Yes
Volume Adjustment (5)YC Yes Yes Yes Yes Yes Yes Yes Yes
Distinctive Ringing (5)YC Yes Yes Yes Yes Yes Yes Yes Yes
Su b a ddres s e s for P orts (5 ) Y C Yes Yes Yes Yes Yes Yes Yes Ye s
Si l e nt FAX C alls (5 ) Y C Yes Yes Yes Yes Yes Yes Yes Ye s
WAN
Frame Relay (Leased Line Only) Yes Yes Yes Yes Yes Yes Yes Yes
IS D N Yes Yes Yes Yes Yes Yes Ye s Yes
IS D N L e a se L ine Yes Yes Yes Yes Yes Yes Ye s Yes
ML-PPP, PPP Compression Yes Yes Yes Yes Yes Yes Yes Yes
Su p p ort for PIAFS (5 ) Y C Yes Yes Yes Yes Yes Yes Yes Ye s
WAN Optimization
BOD Yes Yes Yes Yes Yes Yes Ye s Yes
DDR Yes Yes Yes Yes Yes Yes Ye s Yes
IPX and SPX Spoofing No Yes No No No Yes No Yes
ISDN Caller ID Callback Yes Yes Yes Yes Yes Yes Yes Yes
Snapshot Routing Yes Yes Yes Yes Yes Yes Yes Yes
Table 5 Feature List by Feature Set for the Cisco 811 and 813 Routers (continued)
Feature Sets
Features In IP
IP
Plus
IP/IPX
Plus IP/FW
IP/FW
Plus
IPSec 56
IP/FW/
IPX/Plus
IPSec 56
IP/FW/
Plus
IPSec
3DES
IP/FW/
IPX/Plus
IPSec
3DES

8
Release Notes for the Cisco 800 Series Routers for Cisco IOS Release 12.1(5)YC
78-12776-04
System Requirements
STAC Co m p ress i on Yes Yes Yes Yes Yes Yes Ye s Ye s
Weighted Fair Queuing Quality of
Service
Yes Yes Yes Yes Yes Yes Ye s Ye s
X.25 ID No Yes Yes No Yes Yes Yes Yes
Table 6 Feature List by Feature Set for the Cisco 827 and Cisco 827-4V Routers
Feature Sets
Features In IP
IP/
Voice
IP/FW
Plus
IPSec 56
IP/FW/
Voice
Plus
IPSec 56
IP/IPX/
Voice
Plus
IP/FW
Plus
IPSec
3DES
IP/IPX/
FW Plus
IPSec
3DES
IP/IPX/
FW/Plus
Voice
IPSec
3DES
Address Conservation
DHCP Client Address Negotiation Yes Yes Yes Yes Yes Yes Yes Yes
IP C P A d d ress Nego t iati o n Yes Yes Yes Yes Ye s Yes Yes Ye s
NAT Many to One (PAT) Yes Yes Yes Yes Yes Yes Yes Yes
NAT Many to Many ( M u lti- NAT) Yes Yes Yes Yes Ye s Yes Yes Ye s
Bandwidth Optimization
Net B IOS Name Cachi ng Yes Yes Yes Yes Ye s Yes Yes Ye s
STAC Co m p ress i on Yes Yes Yes Yes Ye s Yes Yes Ye s
Business-Class Quality of Service
ATM T X Ring Prog r a m ming (5 ) Y B Yes Yes Yes Yes Yes Yes Yes Yes
CBR, VBRrt, VBRnrt, UBR Traffic
Classes
Yes Yes Yes Yes Ye s Yes Yes Ye s
Class-Based Weighted Fair Queuing Yes Yes Yes Yes Yes Yes Yes Yes
IP Policy R outi n g Yes Yes Yes Yes Ye s Yes Yes Ye s
LFI/LLQ (5)YB No Yes Yes Yes Yes Yes Yes Yes
Per-Virtual Circuit Queuing Yes Yes Yes Yes Yes Yes Yes Yes
Per-Virtual Circuit Shaping Yes Yes Yes Yes Yes Yes Yes Yes
Weighted Random Early Detection Yes Yes Yes Yes Yes Yes Yes Yes
Business-Class Security
GRE Tu nnelin g No Yes Yes Yes Ye s Yes Yes Ye s
IP (and IPX when applicable) Basic
and Extended Access Lists
Yes Yes Yes Yes Ye s Yes Yes Ye s
Table 5 Feature List by Feature Set for the Cisco 811 and 813 Routers (continued)
Feature Sets
Features In IP
IP
Plus
IP/IPX
Plus IP/FW
IP/FW
Plus
IPSec 56
IP/FW/
IPX/Plus
IPSec 56
IP/FW/
Plus
IPSec
3DES
IP/FW/
IPX/Plus
IPSec
3DES

9
Release Notes for the Cisco 800 Series Routers for Cisco IOS Release 12.1(5)YC
78-12776-04
System Requirements
Net B IOS Acces s Lists Ye s Yes Ye s Yes Yes Ye s Yes Yes
PAP, CHAP, Local Password Yes Yes Yes Yes Yes Yes Yes Yes
Route and Router Authentication Yes Yes Yes Yes Yes Yes Yes Yes
Ease of Use and Deployment
Cis c o Fas t Step Soft war e Yes Yes Yes Yes Yes Yes Yes Yes
Easy IP Phase I and II Yes Yes Yes Yes Yes Yes Yes Yes
PPPoE MTU Adjustment (5)YB Yes Yes Yes Yes Yes Yes Yes Yes
Enhanced Security
Cisco IOS Firewall (3)XG No No Yes Yes No Yes Yes Yes
Context-Based Access Control Lists (3)XG No No Yes Yes No Yes Yes Yes
Denial-of-Service Detection (3)XG No No Yes Yes No Yes Yes Yes
IPSec Encryption with 3DES and
L2TP
(3)XG No No No No No Yes Yes Yes
Java Blocking (3)XG No No Yes Yes No Yes Yes Yes
Real-Time Alerts (3)XG No No Yes Yes No Yes Yes Yes
LAN
IP Yes Yes Yes Yes Ye s Yes Yes Ye s
IPX NoNoNoNoYesNoYesNo
Transparent Bridging Yes Yes Yes Yes Yes Yes Yes Yes
Management
Cis c oVi ew Yes Yes Yes Yes Ye s Yes Yes Ye s
Ope n DSL (5 ) Y C Yes Yes Yes Yes Yes Yes Yes Yes
SN T P No Yes Yes Yes Ye s Yes Yes Ye s
SNMP, Telnet, Console Port Yes Yes Yes Yes Yes Yes Yes Yes
Sy s log No Yes Yes Yes Ye s Yes Yes Ye s
TACACS+ (also a security feature) Yes Yes Yes Yes Yes Yes Yes Yes
TFTP Client and Server Yes Yes Yes Yes Yes Yes Yes Yes
Routing
IP Enhanced IGRP No No Yes Yes No Yes Yes No
IP Multicast (relay only) Yes Yes Yes Yes Yes Yes Yes Yes
IP - P olicy Routi n g Yes Yes Yes Yes Ye s Yes Yes Ye s
IPX RIP/SAP IPX WAN No No No No Yes No Yes No
Table 6 Feature List by Feature Set for the Cisco 827 and Cisco 827-4V Routers (continued)
Feature Sets
Features In IP
IP/
Voice
IP/FW
Plus
IPSec 56
IP/FW/
Voice
Plus
IPSec 56
IP/IPX/
Voice
Plus
IP/FW
Plus
IPSec
3DES
IP/IPX/
FW Plus
IPSec
3DES
IP/IPX/
FW/Plus
Voice
IPSec
3DES

10
Release Notes for the Cisco 800 Series Routers for Cisco IOS Release 12.1(5)YC
78-12776-04
New and Changed Information
New and Changed Information
New Software Features in Release 12.1(5)YC1
Cisco 827 and Cisco 827-4V Routers
The following new software features are supported by the Cisco 827 and Cisco 827-4V routers for
Cisco IOS Release 12.1(5)YC3 and above:
OpenDSL
This feature implements auto-provisioning of the Cisco 827 and Cisco 827-4V routers.
Auto-provisioning operates at bootup, and includes two procedures: Device Authentication and Image
Maintenance. The router will be authenticated at bootup using its vendor ID and serial number. It then
requests the Proxy Element to download its configuration file, and configures itself from CLIs in this
file. It then polls for configuration changes, and downloads a new image and configuration file, if
available, to retrieve the latest changes.
RIP, R IPv2 Yes Yes Yes Yes Ye s Yes Yes Ye s
Voice Features (Cisco 827-4V only)
G.711, G.729a, G.723.1 Codecs
with High-Performance DSP
Support
No Yes No Yes Yes N o No Ye s
Loop-Start Key-System or Direct
Phone Support
No Yes No Yes Yes N o No Ye s
RAS Gatekeeper Communications
Protocol
No Yes No Yes Yes N o No Ye s
VoIP H.323 No Yes No Yes Yes No No Yes
Table 6 Feature List by Feature Set for the Cisco 827 and Cisco 827-4V Routers (continued)
Feature Sets
Features In IP
IP/
Voice
IP/FW
Plus
IPSec 56
IP/FW/
Voice
Plus
IPSec 56
IP/IPX/
Voice
Plus
IP/FW
Plus
IPSec
3DES
IP/IPX/
FW Plus
IPSec
3DES
IP/IPX/
FW/Plus
Voice
IPSec
3DES