Cisco SFE1000P - Small Business Managed Switch User manual

Data Sheet
© 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 1 of 5
Cisco SFE1000P 8-Port 10/100 Ethernet Switch:
PoE/Fanless
Cisco Small Business Managed Switches
Secure, Reliable, Managed Ethernet Switching with PoE
Highlights
●Power over Ethernet easily and cost-effectively powers wireless access points, video
cameras, and other network-connected endpoints
●Strong security protects network traffic to keep unauthorized users off the network
●Intelligent QoS helps ensure a consistent network experience and supports networked
applications including voice, video, and data storage
●Compact size and fanless design are ideal for areas with limited space
Figure 1. Cisco SFE1000P 8-Port 10/100 Ethernet Switch: PoE/Fanless
Product Overview
The Cisco®SFE1000P 8-Port 10/100 Ethernet Switch (Figure 1) is an 8-port fully managed 10/100
Ethernet switch with two Gigabit copper or optical interfaces for connecting to a core switch.
For wireless or voice over IP (VoIP) deployments, the Cisco SFE1000P supports the IEEE 802.3af
standard for Power over Ethernet (PoE). With automatic load sensing, the power control circuitry
automatically detects PoE on end devices before providing power. (PoE is limited to the fixed
10BASE-T/100BASE-TX ports.) The unit can provide maximum output power of up to 15.4W per
PoE port on four ports, or up to 7.5W per PoE port on eight ports simultaneously. It provides
independent overload and short-circuit protection for each port. LED indicators indicate the power
status for each PoE port.
With the enhanced quality of service (QoS) and traffic-management features provided by the Cisco
SFE1000P, voice and video data can be prioritized, ensuring clear and reliable voice
communications. An intuitive, secure management interface enables you to easily set up the QoS
parameters, along with the other advanced security and performance features, resulting in an
optimized, more secure network.

Data Sheet
© 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 2 of 5
Features
●Eight 10/100 switched RJ-45 ports deliver up to 200 Mbps of throughput per port
●Two 10/100/1000 switched RJ-45/ mini Gigabit Interface Converter (mini-GBIC) combo
ports
●PoE on the 10/100 ports supplies up to the IEEE 802.3af maximum: 15.4W per port for up
to four ports, or 7.5W per port on eight ports
●5.6-Gbps nonblocking, store-and-forward switching mechanism
●Simplified QoS management enabled by queuing techniques using 802.1p, Differentiated
Services (DiffServ), or type of service (ToS) traffic prioritization specifications
●WebView management allows configuration and monitoring of the switch using a standard
web browser
●Secure remote management of the switch via Secure Shell (SSH) and Secure Sockets
Layer (SSL) channel network protocols
●802.1q-based VLANs enable segmentation of networks for improved performance and
security
●Private VLAN Edge (PVE) simplifies network isolation for guest connections or autonomous
networks
●Automatic configuration of VLANs across multiple switches through Generic VLAN
Registration Protocol (GVRP)/ Generic Attribute Registration Protocol (GARP)
●Automatic medium dependent interface (MDI) and MDI crossover (MDI-X) detection
●User/network port-level security via 802.1X authentication and MAC-based filtering
●Increased bandwidth (up to 8x) and link redundancy with Link Aggregation Control Protocol
(LACP)
●Enhanced rate-limiting capabilities, including back pressure to control the rate of data flow
into and out of a port
●Provides multicast, broadcast, and flood control
●Port mirroring for noninvasive monitoring of switch traffic
●Jumbo frame support up to 1632 bytes
●Supports Simple Network Management Protocol (SNMP) v1, v2c, and v3
●Fully rack-mountable using included rack-mounting hardware
Specifications
Table 1 contains the specifications, package contents, and minimum requirements for the Cisco
SFE1000P 8-Port 10/100 Ethernet Switch.
Table 1. Specifications for the Cisco SFE1000P 8-Port 10/100 Ethernet Switch: PoE/Fanless
Specifications
Ports ●8 RJ-45 connectors for 10BASE-T and 100BASE-TX
●2 RJ-45 connectors for 10BASE-T/100BASE-TX/1000BASE-T with 2 SFP slots
●Console port
●Auto MDI/MDI-X
●Auto-negotiate/manual setting
Buttons None

Data Sheet
© 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 3 of 5
Cabling type ●Unshielded twisted pair (UTP) Category 5 or better for 10BASE-T/100BASE-TX
●UTP Category 5 Ethernet or better for 1000BASE-T
LEDs 10/100 Link/Act, PoE, 2 Giga Link/Act, Speed, System
Power over Ethernet
802.3af compliant Supplies up to IEEE standard maximum of 15.4W on four 10/100 ports or up to 7.5W on
eight 10/100 ports
Performance
Switching capacity 5.6 Gb nonblocking
Forwarding rate 4.17 mpps wire-speed performance
Layer 2
MAC table size 8000
Number of VLANs 256 active VLANs (4096 range)
VLAN Port-based and 802.1q tag-based VLANs; management VLAN
Head-of-line (HOL) blocking HOL blocking prevention
Management
Web user interface Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)
SNMP SNMP version 1, 2c, and 3 with support for traps
SNMP MIBs RFC1213 MIB-2, RFC2863 interface MIB, RFC2665 Ether-like MIB, RFC1493 bridge MIB,
RFC2674 extended bridge MIB (P-bridge, Q-bridge), RFC2819 RMON MIB (groups 1,2,3,9
only), RFC2737 entityMIB, RFC 2618 RADIUS client MIB, RFC 1215 traps, and private
PoE MIB
Remote Monitoring (RMON) Embedded RMON software agent supports 4 RMON groups (history, statistics, alarms, and
events) for enhanced traffic management, monitoring, and analysis
Firmware upgrade Web browser upgrade (HTTP) and Trivial File Transfer Protocol (TFTP)
Port mirroring Traffic on a port can be mirrored to another port for analysis with a network analyzer or
RMON probe
Other management ●Traceroute
●SSL
●SSH
●RADIUS
●SSL security for web user interface
●Dynamic Host Configuration Protocol (DHCP) client
●BOOTP
●Simple Network Time Protocol (SNTP)
●Xmodem upgrade
●Cable diagnostics
●Ping
●Telnet client (SSH secure support)
Security
IEEE 802.1x 802.1x - RADIUS authentication, MD5 encryption
Access control lists (ACLs) Drop or rate limit based on source and destination MAC or IP address, protocol,
ToS/DSCP, port, VLAN, and Ether type
Availability
Link aggregation Using IEEE 802.3ad LACP, up to 8 ports in up to 8 groups
Storm control Broadcast, multicast, and unknown unicast
Spanning Tree IEEE 802.1D Spanning Tree, IEEE 802.1w Rapid Spanning Tree, and IEEE 802.1s Multiple
Spanning Tree
IGMP (v1/v2) snooping ●Provides for fast client joins and leaves of multicast streams and limits bandwidth-
intensive video traffic to only the requestors
●Supports 256 multicast groups
Quality of Service
Priority levels 4 hardware queues
Scheduling Priority queuing and weighted round-robin (WRR)

Data Sheet
© 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 4 of 5
Class of service ●Port based
●802.1p VLAN priority based
●IPv4/v6 IP precedence/ToS/DSCP-based
●TCP/ User Datagram Protocol (UDP) port-based
●DiffServ
●Classification and re-marking ACLs
Rate limiting ●Ingress policer
●Egress rate control
Standards
●802.3 10BASE-T Ethernet
●802.3u 100BASE-TX Fast Ethernet
●802.3ab 1000BASE-T Gigabit Ethernet
●802.3z Gigabit Ethernet
●802.3x flow control
●802.3 ad LACP
●802.3af PoE, 802.1D Spanning Tree Protocol (STP)
●802.1Q/p VLAN
●802.1w Rapid STP
●802.1s Multiple STP
●802.1x port access authentication
Environmental
Dimensions
W x H x D 12.01 x 1.73 x 6.69 in. (305 x 44 x 170 mm)
Weight 3.02 lb (1.37 kg)
Power External AC power adapter
Certification FCC Part 15 Class A, CE Class A, UL, cUL, CE mark, CB
Operating temperature 32°to 104°F (0°to 40°C)
Storage temperature -4°to 158°F (-20°to 70°C)
Operating humidity 10% to 90%, noncondensing
Storage humidity 10% to 95%, noncondensing
Package Contents
●Cisco SFE1000P 8-port 10/100 Ethernet Switch
●AC power adapter with power cord
●Two rack-mounting kits with 8 screws
●CD-ROM with user guide (PDF)
●Registration card
●Console cable
Minimum Requirements
●Web-based configuration: Java-enabled web browser
●Category 5 Ethernet network cable
●TCP/IP, network adapter, and network operating system (such as Microsoft Windows or Linux) installed on each computer
in the network
Product Warranty
5-year limited hardware warranty with return to factory replacement and 90-day limited software warranty.
Cisco Limited Warranty for Cisco Small Business Series Products
This Cisco Small Business product comes with a 5-year limited hardware warranty with return to
factory replacement and a 90-day limited software warranty. In addition, Cisco offers software
application updates for bug fixes and telephone technical support at no charge for the first 12
months following the date of purchase. To download software updates, go to:
http://www.cisco.com/go/smallbiz.

Data Sheet
© 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 5 of 5
Product warranty terms and other information applicable to Cisco products are available at
http://www.cisco.com/go/warranty.
For More Information
For more information on Cisco Small Business products and solutions, visit:
http://www.cisco.com/smallbusiness.
Printed in USA C78-501232-00 11/08