Cisco SFE2000P User manual

Data Sheet
© 2008–2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 1 of 7
Cisco SFE2000P 24-Port 10/100
Ethernet Switch: PoE
Cisco Small Business Managed Switches
Secure, Flexible Switches for Small Business Network Foundations
Highlights
●Designed for small businesses that require speed, flexibility, and performance
●Power over Ethernet easily and cost-effectively powers wireless access points, video cameras, and other
network-connected endpoints
●Resilient clustering provides the ability to manage several switches as a single switch to support growing
businesses
●Enhanced QoS helps ensure a consistent network experience and supports networked applications including
voice, video, and data storage
●Strong security protects network traffic to keep unauthorized users off the network
●Limited lifetime warranty
Figure 1. Cisco SFE2000P 24-Port 10/100 Ethernet Switch: PoE
Product Overview
The Cisco®SFE2000P 24-Port 10/100 Ethernet Switch (Figure 1) is optimized for maximizing system availability,
with fully redundant stacking and dual images for resilient firmware upgrades. The Cisco SFE2000P is able to secure
the network through IEEE 802.1Q VLANs, IEEE 802.1X port authentication, access control lists (ACLs), denial-of-
service (DoS) prevention, and MAC-based filtering. The enhanced QoS and traffic management features ensure
clear and reliable voice and video communications.
For wireless or voice over IP (VoIP) deployments, the Cisco SFE2000P supports the IEEE 802.3af standard for Power
over Ethernet (PoE). With automatic load sensing, the power control circuitry automatically detects PoE on the end
device before providing power. For safety, each port has independent overload and short-circuit protection, along with
LED indicators for power status. A maximum of 15.4W is available on the Fast Ethernet ports for powering PoE-enabled
wireless access points or VoIP handsets, with a maximum per-device PoE delivery of 180W available for all ports.
The Cisco SFE2000P includes an intuitive, secure management interface, enabling you to better utilize the switch’s
comprehensive feature set, resulting in a better-optimized, more secure network.

Data Sheet
© 2008–2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 2 of 7
Features
●Twenty-four 10/100 Ethernet ports plus four 10/100/100 copper ports
●Two Small Form-Factor Pluggable (SFP) slots (shared with two copper ports) for fiber Gigabit Ethernet
expansion
●IEEE 802.3af PoE delivered over any of the twenty-four 10/100 ports
●Maximum per-switch PoE delivery of 180W for all
●Dual images for resilient firmware upgrades
●12.8-Gbps, non-blocking, store-and-forward switching capacity
●Simplified quality of service (QoS) management using 802.1p, Differentiated Services (Diffserv), or type of
service (ToS) traffic prioritization specifications
●Fully resilient stacking provides optimized growth with simplified management
●ACLs for granular security and QoS implementation
●Can be configured and monitored from a standard web browser
●Secure remote management of the switch via Secure Shell (SSH) Protocol and Secure Sockets Layer (SSL)
encryption
●802.1Q-based VLANs enable segmentation of networks for improved performance and security
●Private VLAN Edge (PVE) for simplified network isolation of guest connections or autonomous networks
●Automatic configuration of VLANs across multiple switches through Generic VLAN Registration Protocol
(GVRP) and Generic Attribute Registration Protocol (GARP)
●User/network port-level security via 802.1X authentication and MAC-based filtering
●Increased bandwidth and added link redundancy with link aggregation
●Enhanced rate-limiting capabilities, including back pressure, multicast, and broadcast flood control
●Port mirroring for noninvasive monitoring of switch traffic
●Mini jumbo frame support (1600 bytes)
●Simple Network Management Protocol (SNMP) v1, v2c, v3 and Remote Monitoring (RMON) support
●Fully rack-mountable using the included rack-mounting hardware
●Simple one-step automated installation and initial configuration
Specifications
Table 1 contains the specifications, package contents, and minimum requirements for the Cisco SFE2000P 24-Port
10/100 Ethernet Switch.
Table 1. Specifications for the Cisco SFE2000P 24-Port 10/100 Ethernet Switch: PoE
Feature Description
Specifications
Ports ●24 RJ-45 connectors for 10BASE-T/100BASE-TX
●Four 10BASE-T/100BASE-TX/1000BASE-T with 2 Gigabit combo ports
●Shared between mini Gigabit Interface Converter (mini-GBIC) ports
●Console port
●Auto medium dependent interface (MDI) and MDI crossover (MDI-X)
●Auto negotiate/manual setting
●RPS port for connecting to redundant power supply unit
Buttons Reset button

Data Sheet
© 2008–2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 3 of 7
Feature Description
Cabling type ●Unshielded twisted pair (UTP) Category 5 or better for 10BASE-T/100BASE-TX
●UTP Category 5 Ethernet or better for 1000BASE-T
LEDs PWR, Fan, Link/Act, PoE, Speed, RPS, Master, Stack ID 1 through 8
PoE
●IEEE 802.3af PoE delivered over any of the twenty-four 10/100 ports
●Power budget allows for max power of 15.4W on up to 12 ports simultaneously
Performance
Switching capacity Up to 12.8 Gbps, nonblocking
Forwarding rate
(based on 64-byte packets) Up to 9.5 mpps
Stacking
Stack operation ●Up to 8 units in a stack (192 ports)
●Hot insertion and removal
●Ring and chain stacking options
●Master and backup master for resilient stack control
●Auto-numbering or manual configuration of units in stack
Layer 2
MAC table size 8000
Number of VLANs 256 active VLANs (4096 range)
VLAN ●Port-based and 802.1Q tag-based VLANs
●Protocol-based VLAN
●Management VLAN
●PVE
●GVRP
Head-of-line (HOL) blocking HOL blocking prevention
Layer 3
Layer 3 options ●Static routing
●Classless interdomain routing (CIDR)
●128 static routes
●IPv4
●Forwarding in silicon – wire-speed forwarding of Layer 3 traffic
IPv6
IPv6 IPv6 Host Mode
IPv6 over Ethernet
Dual IPv6/IPv4 stack
IPv6 Neighbor and Router Discovery(ND)
IPv6 Stateless Address Autoconfiguration
Path MTU Discovery
Duplicate Address Detection (DAD)
ICMPv6
IPv6 over IPv4 network with ISATAP tunnel support
IPv6 QoS Prioritize IPv6 packets in hardware
IPv6 ACL Drop or Rate Limit IPv6 packets in hardware
MLD Snooping Deliver IPv6 multicast packets onlyto the required receivers
IPv6 Applications Web/SSL, Telnet Server/SSH, Ping, Traceroute, SNTP, TFTP, Radius, Syslog, DNS Client

Data Sheet
© 2008–2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 4 of 7
Feature Description
IPv6 RFCs Supported RFC2463 – ICMPv6
RFC3513 – IPv6 Address architecture
RFC 4291 – IP Version 6 Addressing Architecture
RFC 2460 – Internet Protocol v6 (IPv6) Specification
RFC 2461 – Neighbor Discovery for IPv6
RFC 2462 – IPv6 Stateless Address Auto-configuration
RFC 1981 – Path MTU Discovery
RFC 4007 – IPv6 Scoped Address Architecture
RFC3484 – Default address selection mechanism is described by RFC3484
RFC4214 – ISATAP tunneling
RFC4293 – MIB IPv6: Textual Conventions and General Group
RFC 3595 – Textual Conventions for IPv6 Flow Label
Management
Web user interface Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)
SNMP SNMP version 1, 2c, 3 with support for traps
SNMP MIBs ●RFC1213 MIB-2
●RFC2863 interface MIB
●RFC2665 Ether-like MIB
●RFC1493 Bridge MIB
●RFC2674 Extended Bridge MIB (P-bridge, Q-bridge)
●RFC2819 RMON MIB (groups 1,2,3,9 only)
●RFC2737 Entity MIB
●RFC 2618 RADIUS client MIB
●RFC 1215 traps
RMON Embedded RMON software agent supports four RMON groups (history, statistics, alarms, and events) for
enhanced traffic management, monitoring, and analysis
Firmware upgrade ●Web browser upgrade (HTTP) and Trivial File Transfer Protocol (TFTP)
●Dual images for resilient firmware upgrades
Port mirroring Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe
Other management ●Traceroute
●Single IP management
●SSL security for web user interface
●SSH
●RADIUS
●Port mirroring
●TFTP upgrade
●Dynamic Host Configuration Protocol (DHCP) client
●BOOTP
●Simple Network Time Protocol (SNTP)
●Xmodem upgrade
●Cable diagnostics
●Ping
●Syslog
●Telnet client (SSH secure support)
Security
IEEE 802.1X ●802.1X: RADIUS authentication; MD5 hash
●Guest VLAN
●Single/multiple host mode

Data Sheet
© 2008–2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 5 of 7
Feature Description
Access control ●ACLs: drop or rate limit based on:
◦
Source and destination MAC based
◦
Source and destination IP address
◦
Protocol
◦
Port
◦
VLAN
◦
Differentiated services code point (DSCP)/IP precedence
◦
TCP/User Datagram Protocol (UDP) source and destination ports
◦
802.1p priority
◦
Ethernet type
◦
Internet Control Message Protocol (ICMP) packets
◦
Internet Group Management Protocol (IGMP) packets
◦
Up to 1018 rules
Availability
Link aggregation ●Link aggregation using IEEE 802.3ad Link Aggregation Control Protocol (LACP)
●Up to 8 ports in up to 8 groups
Storm control Broadcast and multicast storm protection
DoS prevention DoS attack prevention
Spanning Tree IEEE 802.1D Spanning Tree, IEEE 802.1w Rapid Spanning Tree, IEEE 802.1s Multiple Spanning Tree, Fast
Linkover
IGMP snooping IGMP (v1/v2) snooping limits bandwidth-intensive video traffic to only the requestors. Supports 256 multicast
groups
QoS
Priority levels 4 hardware queues
Scheduling Priority queuing and weighted round-robin (WRR)
Class of service ●Port based
●802.1p VLAN priority based
●IPv4/v6 IP precedence/ToS/DSCP based
●DiffServ
●Classification and remarking ACLs
Rate limiting ●Ingress policer
●Egress rate control
Standards
●802.3 10BASE-T Ethernet
●802.3u 100BASE-TX Fast Ethernet
●802.3ab 1000BASE-T Gigabit Ethernet
●802.3z Gigabit Ethernet
●802.3x flow control
●802.3ad LACP
●802.3af PoE
●802.1d Spanning Tree Protocol (STP)
●802.1Q/p VLAN
●802.1w Rapid STP
●802.1s Multiple STP
●802.1X port access authentication
Environmental
Dimensions
W x D x H 17.32 x 14.70 x 1.73 in. (440 x 375 x 44 mm)
Unit weight 10.89 lb (4.94 kg)
Certification UL (UL 60950), CSA (CSA 22.2), CE Mark, FCC Part 15 (CFR 47) Class A
Operating temperature 32º to 104ºF (0º to 40ºC)
Storage temperature –4º to 158ºF (–20º to 70ºC)
Operating humidity 10% to 90% relative humidity, noncondensing

Data Sheet
© 2008–2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 6 of 7
Feature Description
Storage humidity 10% to 95% relative humidity, noncondensing
Number of fans 2
Acoustic noise 50 dB max.
Power 100–240V AC, 50–60 Hz, internal, universal; also equipped with redundant power supply connector for
external power supply 48V DC
Power consumption ●No PoE supplied: 12V@4A (48W)
●12 ports half-power (7.5W): 138W
●12 ports full-power (15 W): 225W
●24 ports half-power (7.5W): 225W
Package Contents
●Cisco SFE2000P 24-Port 10/100 Ethernet Switch
●Console cable
●AC power cord
●Rack-mount kit
●Quick-start installation guide
Minimum Requirements
●Web-based utility: web browser (Mozilla Firefox 1.5 or later, Internet Explorer 5.5 or later, Netscape 7.01 or later)
●Category 5 Ethernet network cables
●Operating system: Windows 2000, XP or later
Product Warranty
Limited lifetime warranty with return to factory replacement, one year telephone support and software fixes for the warranty term.
Service & Support
Cisco Small Business switches are backed by the Cisco Small Business Support Service, which provides affordable
peace-of-mind coverage. This subscription-based service helps you protect your investment and derive maximum
value from Cisco Small Business products. Delivered by Cisco and backed by your trusted partner, this
comprehensive service includes software updates, access to the Cisco Small Business Support Center, and
expedited hardware replacement.
Cisco Small Business products are supported by professionals in Cisco Small Business Support Center locations
worldwide who are specifically trained to understand your needs. The Cisco Small Business Support Community, an
online forum, enables you to collaborate with your peers and reach Cisco technical experts for support information.
Cisco Limited Lifetime Hardware Warranty
This Cisco Small Business product offers a limited lifetime hardware warranty with return to factory replacement and
a 1-year limited warranty for fans and power supplies. In addition, Cisco offers telephone technical support at no
charge for the first 12 months following the date of purchase and software bug fixes for the warranty term. To
download software updates, go to: http://www.cisco.com/cisco/web/download/index.html.
Product warranty terms and other information applicable to Cisco products are available at
http://www.cisco.com/go/warranty.
For More Information
For more information on Cisco Small Business products and solutions, visit: http://www.cisco.com/smallbusiness.

Data Sheet
© 2008–2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 7 of 7
Printed in USA C78-502067-05 01/11