Cisco 8020 User manual

Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: [phone]
800 553-NETS (6387)
Fax: [phone]
Cisco Video Surveillance 8020/8030 IP Camera
Reference Guide
Release 1.0.0
July 12, 2017

NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED
WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.
THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT
SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE
OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.
The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB’s public
domain version of the UNIX operating system. All rights reserved. Copyright © 1981, Regents of the University of California.
NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS” WITH
ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT
LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF
DEALING, USAGE, OR TRADE PRACTICE.
IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING,
WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO
OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this
URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership
relationship between Cisco and any other company. (1110R)
Copyright © 2017 Cisco Systems, Inc. All rights reserved.

ii
Cisco Video Surveillance 8020/8030 IP Camera Reference Guide
CONTENTS
Preface v
Overview v
Organization v
Obtaining Documentation and Support v
CHAPTER 1Getting Started 1-1
Overview 1-1
Physical Description 1-2
Hardware Installation 1-4
Cisco Video Surveillance 8020 IP Camera Hardware Installation 1-5
Cisco Video Surveillance 8030 IP Camera Hardware Installation 1-9
LED Definitions 1-16
Hardware Reset 1-17
MicroSD/SDHC/SDXC Card Capacity 1-17
Network Deployment 1-17
General Connection (PoE) 1-17
Network Connection 1-18
Auto Focus 1-20
CHAPTER 2Accessing the IP Camera 2-1
Using Web Browsers 2-1
Performing the Initial Setup of the IP Camera 2-2
Using RTSP Players 2-3
Using 3GPP-Compatible Mobile Devices 2-3
CHAPTER 3IP Camera Main Page 3-1
Live Video Window for H.264 or H.265 Video Streams 3-3
Live Video Window for MJPEG Video Streams 3-5
CHAPTER 4Client Settings 4-1
H.265/H.264 Media Options 4-1
H.265/H.264 Protocol Options 4-1
Two Way Audio 4-2

Contents
iii
Cisco Video Surveillance 8020/8030 IP Camera Reference Guide
MP4 Saving Options 4-2
Local Streaming Buffer Time 4-2
Joystick settings 4-2
CHAPTER 5Configuration 5-1
Accessing the Settings Pages 5-2
System > General settings 5-3
System > Homepage layout 5-3
General settings 5-3
Theme Options 5-4
System > Logs 5-5
Log server settings 5-5
System log 5-6
Access log 5-6
System > Parameters 5-6
System > Maintenance 5-6
General settings > Upgrade firmware 5-6
General settings > Reboot 5-7
General settings > Restore 5-7
Import/Export files 5-7
Media > Image 5-8
General settings 5-8
Day/Night settings 5-9
Image settings 5-10
Exposure 5-10
Lens configuration 5-12
Focus 5-12
Focus Window 5-13
Privacy Mask 5-13
Media > Video 5-14
Stream settings—Mode - Resolution and Frame rate 5-14
Media > Audio 5-19
Network > General settings 5-19
Network Type Tab 5-19
Network > Streaming protocols 5-21
HTTP streaming 5-21
RTSP Streaming 5-22
Network > QoS (Quality of Service) 5-24

Contents
iv
Cisco Video Surveillance 8020/8030 IP Camera Reference Guide
Requirements for QoS 5-24
QoS models 5-24
Network > SNMP (Simple Network Management Protocol) 5-25
SNMP Configuration 5-25
Security > User accounts 5-25
Privilege Management 5-26
Account Management 5-26
Security > HTTPS (Hypertext Transfer Protocol over SSL) 5-26
Create and Install Certificate Method 5-26
Security > Access List 5-27
General Settings 5-27
Filter 5-28
Administrator IP address 5-29
Security > IEEE 802.1X 5-29
Security > SSH 5-30
PTZ > PTZ settings 5-30
Digital PTZ Operation (E-PTZ Operation) 5-30
Patrol Settings 5-31
Event > Event settings 5-31
Event 5-31
Add server 5-33
Action 5-34
Add media 5-35
Customized Script 5-37
Applications > Motion detection 5-37
How does Motion Detection Work? 5-38
Applications > DI and DO 5-38
Applications > Tampering detection 5-38
Applications > Audio detection 5-39
Applications > Package management 5-41
Application > PIR 5-41
Recording > Recording settings 5-42
Recording Settings 5-42
Local storage > SD card management 5-44
SD card status 5-44
SD card format 5-44
SD card control 5-44
Local storage > Content management 5-45

Contents
v
Cisco Video Surveillance 8020/8030 IP Camera Reference Guide
Searching and Viewing the Records 5-45
Search Results 5-45

v
Cisco Video Surveillance 8020/8030 IP Camera Reference Guide
Preface
Overview
This document provides information about installing deploying, and using the Cisco Video Surveillance
8020 IP Camera and the 8030 IP Camera.
Organization
This manual is organized as follows:
Obtaining Documentation and Support
For information about obtaining documentation, submitting a service request, and gathering additional
information, see the monthly What’s New in Cisco Product Documentation. This document also lists
new and revised Cisco technical documentation. It is available at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed
and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free
service and Cisco currently supports RSS version 2.0.
Chapter 1, “Getting Started” Provides information about getting started with
and understanding the IP Camera
Chapter 2, “Accessing the IP Camera” Explains how to access the IP camera through web
browsers and RTSP players
Chapter 3, “IP Camera Main Page” Describes the layout of the main page of the IP
camera web based interface
Chapter 4, “Client Settings” explains how to select the stream transmission
mode and saving options on the local computer
Chapter 5, “Configuration” Describes the IP camera settings options

vi
Cisco Video Surveillance 8020/8030 IP Camera Reference Guide
Preface
Obtaining Documentation and Support

CHAPTER
1-1
Cisco Video Surveillance 8020/8030 IP Camera Reference Guide
1
Getting Started
This chapter provides information about getting started with and understanding the IP camera. It
includes the following sections:
•Overview, page 1-1
•Physical Description, page 1-2
•Hardware Installation, page 1-4
•LED Definitions, page 1-15
•Hardware Reset, page 1-15
•MicroSD/SDHC/SDXC Card Capacity, page 1-15
•Network Deployment, page 1-15
•Auto Focus, page 1-18
Overview
The Cisco Video Surveillance 8020 (indoor) and 8030 (indoor/outdoor) IP Cameras are high-definition,
full-functioned video endpoints with industry-leading image quality and processing power. The cameras
are capable of 5MP resolution at 30 frames per second (fps) while optimizing network usage with H.264,
H.265, or MJPEG compression. Contact closures and two-way audio allow integration with
microphones, speakers, and access control systems. With their open, standards-based design, the
cameras provide ideal platforms for integration and operation as independent devices or as part of a
Cisco video surveillance network.
Key features and benefits of the Cisco Video Surveillance cameras include:
•True high-definition video—The cameras stream crisp and clear 5MP video at 30 fps while
maintaining low network bandwidth.
•Streaming—The cameras can stream H.264, H.265, and MJPEG video simultaneously. Each video
stream can be configured with individual resolution, quality, and frame-rate settings.
•Day/night operation—The cameras provide true day/night functionality, and include an infrared (IR)
filter that automatically switches to night mode in low-light scenes. This function can be set to
manual, automatic, or scheduled control.
•Flexible power option—The cameras support Power over Ethernet (PoE) 802.3af Class 0 for 8020
models, 802.3at Class 4 for 8030 models, and 12 VDC for both models.
•Mounting options—The cameras can be installed to either a ceiling or wall.

1-2
Cisco Video Surveillance 8020/8030 IP Camera Reference Guide
Chapter 1 Getting Started
Physical Description
•Motion Detection and Event notification—The cameras can examine designated areas for activity
and notify users or other applications when they detect activity that exceeds a predefined sensitivity
and threshold. The cameras also provide one digital input and one digital output that can be used to
initiate specific actions when an alarm is detected.
Physical Description
The following figures illustrate the camera:
•Figure 1-1—Cisco Video Surveillance 8020 IP Camera inner view
•Figure 1-2 —Cisco Video Surveillance 8020 IP Camera outer view
•Figure 1-3 —Cisco Video Surveillance 8030 IP Camera physical view
Figure 1-1 Cisco Video Surveillance 8020 IP Camera Inner View
1Reset button
2RJ45 Ethernet port
3IR LEDs
4Motorized or fixed lens
5PIR
6Microphone
7SD/SDHC/SDXC Card Slot
8Terminal block