Cisco MGX 8850 PXM45 How to use

Corporate Headquarters:
Copyright © 2003 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Release Notes for Cisco MGX 8850 (PXM45),
MGX 8850 (PXM1E), and MGX 8830, Software
Release 3.0.10
Contents
These release notes are part OL-2914-01 Rev. D0, July 3, 2003
About Release 3.0.10 ........................................................................................................................3
Type of Release ..........................................................................................................................3
Locating Software Updates ........................................................................................................3
Release Note Document Changes ..............................................................................................3
New Features and Enhancements in Release 3.0.10......................................................................... 4
AXSM-E Double Density.......................................................................................................... 4
PXM1E-16-T1E1 with PNNI-IMA Trunking............................................................................ 4
AXSM-32-T1E1-E with PNNI-IMA Trunking .........................................................................4
PXM-UI-S3/B Back Card ..........................................................................................................5
MCC-16-E1 ................................................................................................................................5
RBBN-16-T1E1 .........................................................................................................................5
PXM1E Online Diagnostics .......................................................................................................5
FRSM-12-T3E3 Online Diagnostics ..........................................................................................6
MGX-SRME.............................................................................................................................. 6
MGX-VISM-PR-8T1/8E1 .........................................................................................................6
Alarm Filtering........................................................................................................................... 7
Enhancements ............................................................................................................................7
Service Class Template File Information................................................................................... 7
System Requirements ........................................................................................................................8
Software/Firmware Compatibility Matrix ................................................................................. 8
Hardware Supported ................................................................................................................11
New and Modified Commands................................................................................................ 23
Enable the FRSM, AUSM, and CESM Card cls and clr Commands ......................................24
Limitations, Restrictions, and Notes ...............................................................................................25
Release 3.0.10 Limitations....................................................................................................... 25
Release 3.0.00 Limitations .......................................................................................................33
VISM Limitations.................................................................................................................... 40
RPM-PR and RPM-XF Limitations .........................................................................................41
Restrictions for Release 3.0.10 ................................................................................................41
Restrictions for Release 3.0.00 ................................................................................................ 41
Other Limitations and Restrictions.......................................................................................... 42

2
Release Notes for Cisco MGX 8850 (PXM45), MGX 8850 (PXM1E), and MGX 8830, Software Release 3.0.10 OL-2914-01 Rev D0, July 3, 2003
Contents
Limitations and Restrictions for 2.1.x .............................................................................................43
General Limitations, Restrictions, and Notes ..........................................................................43
APS Management Information................................................................................................ 46
Installing and Upgrading to Release 3.0.10 ....................................................................................54
Important Upgrade Notes .........................................................................................................54
Installation and Upgrade Procedures....................................................................................... 55
Caveats ............................................................................................................................................55
MGX 8830 Caveats .................................................................................................................55
MGX 8850 Caveats ................................................................................................................. 69
Known Route Processor Module or MPLS Caveats.............................................................. 107
MGX-RPM-XF-512 Caveats .................................................................................................107
Acronyms ......................................................................................................................................107
Documentation.............................................................................................................................. 108
Related Documentation ..........................................................................................................108
Obtaining Documentation .............................................................................................................115
World Wide Web ...................................................................................................................116
Documentation CD-ROM...................................................................................................... 116
Ordering Documentation .......................................................................................................116
Documentation Feedback ......................................................................................................116
Obtaining Technical Assistance ....................................................................................................117
Cisco.com ..............................................................................................................................117
Technical Assistance Center ..................................................................................................117

3
Release Notes for Cisco MGX 8850 (PXM45), MGX 8850 (PXM1E), and MGX 8830, Software Release 3.0.10
OL-2914-01 Rev D0, July 3, 2003
About Release 3.0.10
About Release 3.0.10
These release notes describe the system requirements, new features, and limitations that apply to
Release 3.0.10 of the MGX 8850 and the MGX 8830 multiservice switch. These notes also contain Cisco
support information.
Release 3.0.00 introduced the MGX 8850 (PXM45) to both PNNI scaling via an enhanced connection
count (up to 250K connections) and IP/MPLS scaling with the MGX-RPM-XF-512. Release 3.0.10
strengthens the low- and mid-range MGX routing nodes (PXM1E and PXM45) through an increase in
the available T1/E1 ATM port density with a 16-port card for the PXM1E and a 32-port card for the
PXM45, both with IMA capability.
These release notes accompany the technical manuals listed in the “Related Documentation” section on
page 108.
For information about MGX 8950 Release 3.0.10, see the Release Notes for Cisco MGX 8950 Software
Release 3.0.10.
Type of Release
Release 3.0.10 is a hardware and software release for the MGX 8830 PNNI routing switch.
Release 3.0.10 is a hardware and software release for the MGX 8850 (PXM1E) switch.
Release 3.0.10 is a hardware and software release for the MGX 8850 (PXM45) switch.
Locating Software Updates
Software updates are located at Cisco Connection Online (CCO) at the following location:
http://www.cisco.com/kobayashi/sw-center/wan/wan-planner.shtml
Release Note Document Changes
These changes have been made to this document since the Rev. B0, October 24, 2002 revision.
•Fixed typographical errors.
•Removed non-supported SRM-3T3/C card from hardware tables and from Limitations section.
•Added the caution about replacing T1 or T3 cards with E1 or E3 cards (or vice versa) to use the
clrsmcnf command.
•Added syntax for enableaxsmbaps command to clarify usage.
•Added limitation about when configuring virtual interfaces on AXSM cards, that the physical
interface must be of the same ATM header type.
•Added missing SMB-4-155 back card for the AXSM-8-155-E front card.

4
Release Notes for Cisco MGX 8850 (PXM45), MGX 8850 (PXM1E), and MGX 8830, Software Release 3.0.10 OL-2914-01 Rev D0, July 3, 2003
New Features and Enhancements in Release 3.0.10
New Features and Enhancements in Release 3.0.10
Release 3.0.10 contains these new features:
•AXSM-E Double Density
•PXM1E-16-T1E1 with PNNI-IMA Trunking
•AXSM-32-T1E1-E with PNNI-IMA Trunking
•PXM1E Online Diagnostics
•FRSM12 Online Diagnostics
•MGX-SRME
•MGX-VISM-PR-8T1/8E1
•Alarm Filtering
AXSM-E Double Density
This feature doubles the number of ports previously available with each AXSM-E Service Module. Each
AXSM-E Service Module supports up to two back cards. Previous to Release 3.0.10, only one was
supported. The actual bandwidth supported by each card remains constant at 622 Mbps, but the
additional ports allow better scaling of service provider networks using ABR with VS/VD support and
per-connection traffic shaping.
This feature is supported on the MGX 8850 (PXM45) switch.
PXM1E-16-T1E1 with PNNI-IMA Trunking
PXM1E-16-T1E1 is a new PXM1E front card with support for two back cards RBBN-16-T1E1 and
MCC-16-E1. PXM1E will provide up to 16 T1 or E1 ports with IMA Versions 1.0 and 1.1 support for
PNNI trunking.
Note UNI support for the interfaces will be provided in a future software release.
T1 or E1 links (but not a mix) can be grouped to form IMA groups of links 1 to 16 in a single group.
Both RBBN-16-T1E1 and the MCC-16-E1 back cards support 1:1 redundancy on PXM1E-16-T1E1. The
maximum number of connections supported in a shelf with PXM1E-16-T1E1 as the processor card is
13,500 connections.
The PXM1E-16-T1E1 card is supported in the MGX 8830 and the MGX 8850 (PXM1E) switches.
AXSM-32-T1E1-E with PNNI-IMA Trunking
The AXSM-32-T1E1-E card is a double-height service module used on the PXM-45 based MGX 8850
platform. In this release, the AXSM-32-T1E1-E supports ATM cell transfer over a total of 32 T1/E1
interfaces. Up to two back cards of the same type (RBBN-16-T1E1 or MCC-16-E1) are supported with
16 T1/E1 interfaces per backcard. The AXSM-32-T1E1-E card supports a maximum of 32,096
connections. It supports enhanced traffic management capabilities with per-VC/VP traffic shaping and
ABR with VS/VD along with multilevel statistics.

5
Release Notes for Cisco MGX 8850 (PXM45), MGX 8850 (PXM1E), and MGX 8830, Software Release 3.0.10
OL-2914-01 Rev D0, July 3, 2003
New Features and Enhancements in Release 3.0.10
In this release, IMA Versions 1.0 and 1.1 are supported (PNNI trunking only).
Note UNI IMA will be available in a subsequent software release.
PXM-UI-S3/B Back Card
The PXM-UI-S3/B back card provides four serial ports and two Ethernet ports and Stratum-3 clock
functionality for the PXM1E front cards.
MCC-16-E1
The MCC-16-E1 back card has sixteen E1 miniature coaxial connectors.
RBBN-16-T1E1
The RBBN-16-T1E1 back card has a "ribbon" type connector that supports sixteen T1 or E1 ports.
PXM1E Online Diagnostics
The feature provides the capability to configure a hardware-oriented test to check the health of the PXM
cards—both active and standby. The test can be run in the active, standby, or both modes at the same
time. The test is nonintrusive and runs with minimum overhead. The capability is provided as an option.
The failure of online diagnostics in the active PXM1E card results in a switchover to the standby PXM1E
card. The failure of the online diagnostics in the standby PXM1E card results in declaring the standby
PXM1E card as failed. The feature is available for all the different PXM1E cards:
•4OC3/STM1
•8 T3/E3
•16 T1/E1
•T3E3/155
Table 1 describes the PXM1E online diagnostics feature support levels for devices within the PXM1E
cards.
Table 1 PXM1E Devices and Online Diagnostic Feature Support
Device Supported by Online Diagnostics?
Atlas 0 Yes
Atlas 1 No
QE 0 No
QE 1 Yes
CBC 0 No
CBC 1 No
Disk No

6
Release Notes for Cisco MGX 8850 (PXM45), MGX 8850 (PXM1E), and MGX 8830, Software Release 3.0.10 OL-2914-01 Rev D0, July 3, 2003
New Features and Enhancements in Release 3.0.10
FRSM-12-T3E3 Online Diagnostics
This feature provides the capability to configure a hardware-oriented test to check the health of the
FRSM-12-T3E3 card—both active and standby. The test can be run in active, standby, or both modes at
the same time. The test is nonintrusive and runs with minimum overhead. The capability is provided as
an option. The failure of online diagnostics in the active FRSM-12-T3E3 card results in a switchover to
the standby FRSM-12-T3E3 card. The failure of the online diagnostics in the standby FRSM-12-T3E3
card results in declaring the standby FRSM-12-T3E3 card as failed. The failure of the standalone
FRSM-12-T3E3 card results in the card being placed in the failed state but the card will not be reset.
MGX-SRME
This feature provides channelization and redundancy support for MGX-VISM-PR in a MGX 8850
(PXM45) chassis. The MGX-SRME card can take one OC-3 or one STM-1 as ingress, channelize the
signal to a T1 or an E1 and distribute to an MGX-VISM-PR 8T1 or an MGX-VISM-PR 8E1 card via a
distribution bus inside the MGX8850 (PXM45) chassis. For redundancy, a MGX-VISM-PR card can be
configured as a standby card, so if one active MGX-VISM-PR card fails, MGX-SRME reroutes the
traffic to the standby card. MGX-SRME also provides automatic protection switching (APS) capabilities
on the ingress line. If one line fails, the other line takes over. APS protocols include GR-253, ITU-T
Annex A and Annex B.
MGX-VISM-PR-8T1/8E1
This feature provides support for the MGX-VISM-PR-8T1/8E1 card on the MGX 8830 platform, and
provides the capability for voice applications in this switch.
R7k CPU/Nile4o No
ATMizer SAR No
UMCC FPGA No
DMA Controller No
ELMER FPGA No
BRAM No
UIS3 FPGA No
SUNI Framer No
QJET Framer No
Table 1 PXM1E Devices and Online Diagnostic Feature Support (continued)
Device Supported by Online Diagnostics?

7
Release Notes for Cisco MGX 8850 (PXM45), MGX 8850 (PXM1E), and MGX 8830, Software Release 3.0.10
OL-2914-01 Rev D0, July 3, 2003
New Features and Enhancements in Release 3.0.10
Alarm Filtering
The Alarm Filtering feature works in conjunction with Cisco WAN Manager (CWM) 11.0.10 to display
a filtered integrated shelf alarm. The filtered integrated shelf alarm ignores all lines, ports, connections
and feeder alarms reported by a given node. When the CWM GUI displays a group of nodes in group
mode, the group's integrated alarm is the aggregation of all filtered alarms reported by the nodes in the
group, and all trunk/line alarms reported by these nodes.
Enhancements
The product enhancement requests (PERs) in Table 2 were introduced in Release 3.0.10.
ServiceClass Template File Information
This section contains service class template (SCT) file information for Release 3.0.10.
AXSM-E
The following are the new AXSM-E SCT files introduced for this release:
•SCT 52—Policing enabled, for ATM T1/E1 application, maximum VC/CoSB cell threshold setting
is the same between SCT 52 and 53.
•SCT 53—Policing disabled, for ATM T1/E1 application, maximum VC/CoSB cell threshold setting
is the same between SCT 52 and 53.
•SCT 54—Policing enabled, IMA group with 1 to 4 links, maximum VC/CoSB cell threshold setting
is the same between SCT 54 and 55.
•SCT 55—Policing disabled, IMA group with 1 to 4 links, maximum VC/CoSB cell threshold setting
is the same between SCT 54 and 55.
•SCT6—Policing disabled, used for trunks.
The following are checksums for the new AXSM-E SCT file:
•AXSME_SCT.PORT.52.V1—Check sum = 0x199550ec = 429215980
Table 2 List of Product Enhancement Requests in MGX Release 3.0.10
Enhancement
Number Purpose
2291 The persistent topology feature provides CWM with a persistent view of the network, regardless of the
current operational status of the nodes in the network. Topology information (IP address, node ID, feeder
port ID, etc.) is stored in the persistent topology database for each node in the network. If a node is
disconnected from the network due to some error scenario (the link went down, the node rebooted, etc.),
CWM would still be able to retrieve information about this node from the persistent topology database.
Starting with this release, the persistent topology database contains information on the routing and feeder
nodes in the network.
5055 CLI commands provided to display VC/CoS thresholds in the AXSM-E QE.
5068 dspport on AXSM-E card and dsppnport on PXM card should display the same number of SVCs.
5267 Better clock resolution provided for tstdelay on AXSM-E cards.

8
Release Notes for Cisco MGX 8850 (PXM45), MGX 8850 (PXM1E), and MGX 8830, Software Release 3.0.10 OL-2914-01 Rev D0, July 3, 2003
System Requirements
•AXSME_SCT.PORT.53.V1—Check sum = 0xf6d53485 = 4141167749
•AXSME_SCT.CARD.52.V1—Check sum = 0xde496f2 = 233084658
•AXSME_SCT.PORT.54.V1—Check sum = 0x2a96b5b9 = 714519993
•AXSME_SCT.PORT.55.V1—Check sum = 0x5403c5ac = 1409533356
•AXSME_SCT.PORT.6.V1—Check sum = 0xb69ce935 = 3063736629
FRSM12
The following is the new FRSM12 SCT file introduced for this release:
•SCT 7—Enable WFQ for all ATM service types as the default.
The following are checksums for the new FRSM12 SCT file:
•FRSM12_SCT.CARD.7.V1—Check sum = 0x587dd247 = 1484640839
•FRSM12_SCT.PORT.7.V1—Check sum = 0x58d9a42a = 1490658346
PXM1E
The following are the new PXM1E SCT files introduced for this release:
•SCT 52—Policing enabled.
•SCT 53—Policing disabled.
•SCT 54—Policing enabled.
•SCT 55—Policing disabled.
•SCT6—Policing disabled, used for trunks.
The following are checksums for the new PXM1E SCT files:
•PXM1E_SCT.PORT.52.V1—Check sum = 0x199550ec = 429215980
•PXM1E_SCT.PORT.53.V1—Check sum = 0xf6d53485 = 4141167749
•PXM1E_SCT.PORT.54.V1—Check sum = 0x2a96b5b9 = 714519993
•PXM1E_SCT.PORT.55.V1—Check sum = 0x5403c5ac = 1409533356
•PXM1E_SCT.PORT.6.V1—Check sum = 0xb69ce935 = 3063736629
System Requirements
This section describes software compatible with this release, and lists the hardware supported in this
release.
Software/Firmware Compatibility Matrix
Table 3 lists Cisco WAN or Cisco IOS products that are interoperable with Release 3.0.10.

9
Release Notes for Cisco MGX 8850 (PXM45), MGX 8850 (PXM1E), and MGX 8830, Software Release 3.0.10
OL-2914-01 Rev D0, July 3, 2003
System Requirements
MGX and RPM Software Version Compatibility Matrix
Table 4 lists the software that is compatible for use in a switch running Release 3.0.10 software.
Table 3 MGX 3.0.10 Compatibility Matrix
Product N N-1 N-2 Other Releases
CWM 11.0.10 11.0.00 10.5.10 patch 1 10.5.10 patch 2,
10.4.10 patch 3
MGX 8230, 8250, and
MGX 8850 (1.x only) 1.2.11 1.2.10 1.1.42 1.1.34
MGX 8850, PXM45 3.0.10 3.0.00 2.1.80 2.1.76, 2.0.15
MGX 8850, PXM1E 3.0.10 3.0.00 — —
MGX 8830 3.0.10 3.0.00 — —
MGX 8950 3.0.10 3.0.00 2.1.80 2.1.76
BPX/IGX 9.3.42 9.3.36 9.2.42 —
BXM FW MFW MFV MFR —
UXM FW ACH ACH ABT —
URM FW XBB XBB XBA —
MGX 8220 5.0.18 4.1.12 — —
SES 3.0.10 3.0.00 1.1.75 1.0.14
MGX-RPM-PR-256/512 12.2(13)T 12.2(11)T1 12.2(8)T4 —
MGX-RPM-XF-512 12.2(11)YP 12.2(8)YP — —
Table 4 MGX and RPM Software Version Compatibility Matrix
Board Pair Boot Software
Minimum
Boot Code
Version Runtime Software
Latest
Firmware
Version
Minimum
Firmware
Version
PXM45 pxm45_003.000.010.001_bt.fw 3.0.10 pxm45_003.000.010.001_mgx.
fw 3.0.10 3.0.10
PXM45/B
PXM1E-4-155 pxm1e_003.000.010.001_bt.fw 3.0.10 pxm1e_003.000.010.001_mgx.
fw
(MGX 8850 chassis only)
3.0.10 3.0.10
PXM1E-8-T3E3
PXM1E-16-T1E1
PXM1E-COMBO
See note below.
PXM1E-4-155 pxm1e_003.000.010.001_bt.fw 3.0.10 pxm1e_003.000.010.001_m30.
fw
(MGX 8830 chassis only)
3.0.10 3.0.10
PXM1E-8-T3E3
PXM1E-16-T1E
PXM1E-COMBO
See note below.

10
Release Notes for Cisco MGX 8850 (PXM45), MGX 8850 (PXM1E), and MGX 8830, Software Release 3.0.10 OL-2914-01 Rev D0, July 3, 2003
System Requirements
AXSM-1-2488 axsm_003.000.010.001_bt.fw 3.0.10 axsm_003.000.010.001.fw 3.0.10 3.0.10
AXSM-16-155
AXSM-4-622
AXSM-16-T3/E3
AXSM-1-2488/B
AXSM-16-155/B
AXSM-4-622/B
AXSM-16-T3E3/B
AXSM-16-T3E3-E axsme_003.000.010.001_bt.fw 3.0.10 axsme_003.000.010.001.fw 3.0.10 3.0.10
AXSM-8-155-E
AXSM-16-T3E3-E
AXSM-32-T1E1-E
FRSM-12-T3E3 frsm12_003.000.010.001_bt.fw 3.0.10 frsm12_003.000.010.001.fw 3.0.10 3.0.10
MGX-VISM-PR-8T
1vism_8t1e1_VI8_BT_3.1.00.fw 3.1.00 vism_8t1e1_003.051.000.000.f w (CALEA version)
vism_8t1e1_003.001.000.000.f
w (non-CALEA version)
3.51.0.0
(CALEA)
,3.1.00
(non-CAL
EA)
3.51.0.0
(CALEA)
,3.1.00
(non-CA
LEA)
MGX-VISM-PR-8E
1
MGX-SRME — — — — —
AX-CESM-8E1 cesm_8t1e1_CE8_BT_1.0.02.f
w1.0.02 cesm_8t1e1_020.000.002.000.f w20.0.2.0 20.0.2.0
AX-CESM-8T1
MGX-CESM-8T1/B
MGX-AUSM-8T1/
Bausm_8t1e1_AU8_BT_1.0.02.f w1.0.02 ausm_8t1e1_020.000.002.000. fw 20.0.2.0 20.0.2.0
MGX-AUSM-8E1/
B
AX-FRSM-8E1 frsm_8t1e1_FR8_BT_1.0.02.f
w1.0.02 frsm_8t1e1_020.000.002.000.f w20.0.2.0 20.0.2.0
AX-FRSM-8E1-C
AX-FRSM-8T1
AX-FRSM-8T1-C
MGX-FRSM-HS2/
Bfrsm_vhs_VHS_BT_1.0.04.fw 1.0.04 frsm_vhs_020.000.002.000.fw 20.0.2.0
MGX-RPM-PR-256 rpm-boot-mz.122-11.T1 12.2(11)T
1rpm-js-mz.122-11.T1 12.2(11)T 112.2(11)T 1
MGX-RPM-PR-512
MGX-RPM-XF-512 rpmxf-boot-mz.122-11.YP 12.2(11)Y
Prpmxf-js-mz.122-11.YP 12.2(11)Y P12.2(11) YP
Table 4 MGX and RPM Software Version Compatibility Matrix (continued)
Board Pair Boot Software
Minimum
Boot Code
Version Runtime Software
Latest
Firmware
Version
Minimum
Firmware
Version

11
Release Notes for Cisco MGX 8850 (PXM45), MGX 8850 (PXM1E), and MGX 8830, Software Release 3.0.10
OL-2914-01 Rev D0, July 3, 2003
System Requirements
Note The PXM1E-COMBO card is also known as the PXM1E-T3E3-155 card.
Additional Notes
The SNMP MIB release for 3.0.10 is mgxmibs3010.tar.
Table 5 shows the various types of APS protocols that are supported on the AXSM/A and AXSM/B
cards, and the MGX release that provides the support.
Hardware Supported
This section lists:
•MGX 8850 (PXM45) Product IDs, 800 part numbers, and revision levels
•MGX 8850 (PXM1E) Product IDs, 800 part numbers, and revision levels
•MGX 8830 Product IDs, 800 part numbers, and revision levels
Front and back card types, and whether APS connectors are supported for
•MGX 8850 (PXM45)
•MGX 8850 (PXM1E)
•MGX 8830
New Hardware in Release 3.0.10
The following new hardware is supported by the Release 3.0.10 software. Features enabled by the
hardware are described in the “New Features and Enhancements in Release 3.0.10” section on page 4.
•PXM1E-16-T1E1 front card, PXM-UI-S3/B back card, MCC-16-E1 back card, RBBN-16-T1E1
back card
•AXSM-32-T1E1-E front card, MCC-16-E1 back card, RBBN-16-T1E1 back card
APS Connectors
Table 6 lists MGX 8850 (PXM45) APS connectors.
Table 5 APS Protocol Support
Op Mode (APS Protocol)
Card Types
AXSM/A AXSM/B
Op_A mode (GR253) Release 2.1.x and
higher Release 2.1.x and higher
Op_B mode (GR253,
ITU-T Annex A/B) — Release 3.0.00 and higher

12
Release Notes for Cisco MGX 8850 (PXM45), MGX 8850 (PXM1E), and MGX 8830, Software Release 3.0.10 OL-2914-01 Rev D0, July 3, 2003
System Requirements
Table 7 lists MGX 8850 (PXM1E) APS connectors.
Table 8 lists MGX 8830 APS connectors.
Note The PXM1E-COMBO card is also known as the PXM1E-T3E3-155 card.
Note The MGX-SRME card does not need the APS-CON connector for APS.
Table 6 MGX 8850 (PXM45) APS Connectors
Hardware MGX-8850-APS-CON (800-20640-01) MGX-APS-CON (800-05307-01)
AXSM-16-155 Yes Yes
AXSM-16-155/B Yes Yes
AXSM-4-622 Yes Yes
AXSM-4-622/B Yes Yes
AXSM-1-2488 Yes Yes
AXSM-1-2488/B Yes Yes
AXSM-8-155-E Yes Yes
AXSM-2-622-E Yes Yes
MGX-SRME Yes No
Table 7 MGX 8850 (PXM1E) APS Connectors
Hardware MGX-8850-APS-CON (800-20640-01) MGX-APS-CON (800-05307-01)
PXM1E-4-155 Yes Yes
PXM1E-COMBO
(See note below) Yes Yes
MGX-SRME Yes No
Table 8 MGX 8830 APS Connectors
Hardware MGX-8830-APS-CON (800-05308-02)
PXM1E-4-155 Yes
PXM1E-COMBO
(See note below) Yes
MGX-SRME No

13
Release Notes for Cisco MGX 8850 (PXM45), MGX 8850 (PXM1E), and MGX 8830, Software Release 3.0.10
OL-2914-01 Rev D0, July 3, 2003
System Requirements
MGX 8850 (PXM45) Product IDs and Card Types
Table 9 lists Product IDs, 800 part numbers, and revision levels for the MGX 8850 (PXM45).
Table 9 Card Numbers and Revisions Supported in Release 3.0.10 for MGX 8850 (PXM45)
Product ID 800 Part Number Minimum Revision
PXM-UI-S3 800-05787-02 -A0
PXM-HD 800-05052-03 -A0
PXM45 800-06147-07 -B0
PXM45/B 800-09266-04 -A0
AXSM-1-2488 800-05795-05 -A0
AXSM-1-2488/B 800-07983-02 -A0
AXSM-2-622-E 800-18521-02 -A0
AXSM-4-622 800-05774-09 -B0
AXSM-4-622/B 800-07910-05 -A0
AXSM-8-155-E 800-18520-02 -A0
AXSM-16-155 800-05776-06 -A0
AXSM-16-155/B 800-07909-05 -A0
AXSM-16-T3E3 800-05778-08 -A0
AXSM-16-T3E3/B 800-07911-05 -A0
AXSM-16-T3E3-E 800-18519-02 -A0
AXSM-32-T1E1-E 800-22229-01 -A0
SMFLR-1-2488 800-06635-04 -A0
SMFSR-1-2488 800-05490-05 -A0
SMFXLR-1-2488 800-05793-05 -A0
SMFLR-1-2488/B 800-08847-01 -A0
SMFSR-1-2488/B 800-07255-01 -A0
SMFXLR-1-2488/B 800-08849-01 -A0
SMFIR-1-622/C 800-07410-02 -A0
SMFLR-1-622/C 800-07411-02 -A0
SMFIR-2-622 800-05383-01 -A1
SMFLR-2-622 800-05385-01 -A1
SMFIR-2-622/B 800-07412-02 -B0
SMFLR-2-622/B 800-07413-02 -B0
MMF-4-155/C 800-07408-02 -A0
SMFIR-4-155/C 800-07108-02 -A0
SMFLR-4-155/C 800-07409-02 -A0
SMB-4-155 800-07425-02 -A0

14
Release Notes for Cisco MGX 8850 (PXM45), MGX 8850 (PXM1E), and MGX 8830, Software Release 3.0.10 OL-2914-01 Rev D0, July 3, 2003
System Requirements
MMF-8-155-MT 800-04819-01 -A1
SMFIR-8-155-LC 800-05342-01 -B0
SMFLR-8-155-LC 800-05343-01 -C0
MMF-8-155-MT/B 800-07120-02 -A0
SMFIR-8-155-LC/B 800-07864-02 -B0
SMFLR-8-155-LC/B 800-07865-02 -B0
SMB-8-E3 800-04093-02 -A0
SMB-8-T3 800-05029-02 -A0
MCC-16-E1 800-19853-02 -A0
RBBN-16-T1E1 800-21805-03 -A0
FRSM-12-T3E3 800-18731-02 -A0
SMB-6-T3E3 800-08799-01 -A0
MGX-VISM-PR-8E1 800-07991-02 -A0
MGX-VISM-PR-8T1 800-07990-02 -A0
AX-RJ48-8T1 800-02286-01 -A0
AX-R-RJ48-8T11800-02288-01 -A0
AX-RJ48-8E1 800-02408-01 -A0
AX-R-RJ48-8E11800-02409-01 -A0
AX-SMB-8E1 800-02287-01 -A0
AX-R-SMB-8E11800-02410-01 -A0
MGX-SRME 800-14224-02 -A0
MGX-SMFIR-1-155 800-14460-02 -A0
MGX-STM1-EL-1 800-14479-02 -A0
MGX-RPM-PR-256 800-07178-02 -A0
MGX-RPM-PR-512 800-07656-02 -A0
MGX-RPM-XF-512 800-09307-06 -A0
MGX-MMF-FE 800-03202-02 -A0
MGX-RJ45-4E/B 800-12134-01 -A0
MGX-RJ45-FE 800-02735-02 -A0
MGX-XF-UI 800-09492-01 -A0
MGX-1GE 800-18420-03 -A0
MGX-1OC12POS-IR 800-08359-05 -A0
MGX-GE-LHLX 30-1299-01 -A0
MGX-GE-SX 30-1301-01 -A0
MGX-GE-ZX 10-1439-01 -A0
Table 9 Card Numbers and Revisions Supported in Release 3.0.10 for MGX 8850 (PXM45)
(continued)
Product ID 800 Part Number Minimum Revision

15
Release Notes for Cisco MGX 8850 (PXM45), MGX 8850 (PXM1E), and MGX 8830, Software Release 3.0.10
OL-2914-01 Rev D0, July 3, 2003
System Requirements
Table 10 lists MGX 8850 (PXM45) front and back card types and whether APS connectors are
supported.
MGX-APS-CON2800-05307-01 -A0
MGX-8850-APS-CON1800-20640-01 -A0
1. R means that this is a redundant card.
2. Either connector works for the AXSM cards in the MGX 8850 (PXM45).
Table 9 Card Numbers and Revisions Supported in Release 3.0.10 for MGX 8850 (PXM45)
(continued)
Product ID 800 Part Number Minimum Revision
Table 10 MGX 8850 (PXM45) Front and Back Card Types and Supported APS Connectors
Front Card Type Back Card Types Supports APS Connector (MGX APS-CON or MGX-8850-APS-CON)
PXM45 PXM-HD —
PXM-UI-S3 —
PXM45/B PXM-HD —
PXM-UI-S3 —
AXSM-1-2488 SMFSR-1-2488 Yes
SMFLR-1-2488 Yes
SMFXLR-1-2488 Yes
AXSM-1-2488/B SMFSR-1-2488/B Yes
SMFLR-1-2488/B Yes
SMFXLR-1-2488/B Yes
AXSM-2-622-E SMFIR-1-622/C Yes
SMFLR-1-622/C Yes
AXSM-4-622 SMFIR-2-622 Yes
SMFLR-2-622 Yes
AXSM-4-622/B SMFIR-2-622/B Yes
SMFLR-2-622/B Yes
AXSM-8-155-E SMB-4-155 Yes
MMF-4-155/C Yes
SMFIR-4-155/C Yes
SMFLR-4-155/C Yes
AXSM-16-155 MMF-8-155-MT Yes
SMFIR-8-155-LC Yes
SMFLR-8-155-LC Yes

16
Release Notes for Cisco MGX 8850 (PXM45), MGX 8850 (PXM1E), and MGX 8830, Software Release 3.0.10 OL-2914-01 Rev D0, July 3, 2003
System Requirements
MGX 8850 (PXM1E) Product IDs and Card Types
Table 11 contains Product IDs, 800 part numbers, and revision levels for the MGX 8850 (PXM1E).
AXSM-16-155/B SMB-4-155 Yes
MMF-8-155-MT/B Yes
SMFIR-8-155-LC/B Yes
SMFLR-8-155-LC/B Yes
AXSM-16-T3E3,
AXSM-16-T3E3/B
AXSM-16-T3E3-E
SMB-8-T3 —
SMB-8-E3 —
AXSM-32-T1E1-E MCC-16-E1 —
RBBN-16-T1E1 —
FRSM-12-T3E3 SMB-6-T3E3 —
MGX-VISM-PR-8T1 AX-RJ48-8T1 —
AX-R-RJ48-8T1 —
MGX-VISM-PR-8E1 AX-SMB-8E1 —
AX-R-SMB-8E1 —
AX-RJ48-8E1 —
AX-R-RJ48-8E1 —
MGX-SRME MGX-SMFIR-1-155 Yes
MGX-STM1-EL-1 Yes
MGX-RPM-PR-256
MGX-RPM-PR-512 MGX-MMF-FE —
MGX-RJ45-4E/B —
MGX-RJ45-FE —
MGX-RPM-XF-512 MGX-XF-UI —
MGX-1GE —
MGX-1OC12POS-IR —
MGX-GE-LHLX1—
MGX-GE-SX1—
MGX-GE-ZX1—
1. Small form factor pluggable optical transceivers for MGX-1GE back card.
Table 10 MGX 8850 (PXM45) Front and Back Card Types and Supported APS Connectors
(continued)
Front Card Type Back Card Types Supports APS Connector (MGX APS-CON or MGX-8850-APS-CON)

17
Release Notes for Cisco MGX 8850 (PXM45), MGX 8850 (PXM1E), and MGX 8830, Software Release 3.0.10
OL-2914-01 Rev D0, July 3, 2003
System Requirements
Table 11 Card Numbers and Revisions Supported in Release 3.0.10 for MGX 8850 (PXM1E)
Product ID 800 P/N Minimum Revision
PXM1E-4-155 800-18588-03 -A0
PXM1E-8-T3E3 800-18590-03 -A0
PXM1E-16-T1E1 800-18658-04 -A0
PXM1E-COMBO (See note
below) 800-18604-03 -A0
MMF-4-155/C 800-07408-02 -A0
SMFIR-4-155/C 800-07108-02 -A0
SMFLR-4-155/C 800-07409-02 -A0
PXM-UI-S3/B 800-21557-01 -A0
SMB-8-T3 800-05029-02 -A0
SMB-8-E3 800-04093-02 -A0
MGX-T3E3-155 800-18698-02 -A0
MMF-1-155-SFP110-1308-01 -A0
SMFLR-1-155-SFP110-1280-01 -A0
SMFIR-1-155-SFP 10-1283-01 -A0
MCC-16-E1 800-19853-02 -A0
RBBN-16-T1E1 800-21805-03 -A0
MGX-VISM-PR-8T1 800-07990-02 -A0
MGX-VISM-PR-8E1 800-07991-02 -A0
MGX-SRME 800-14224-02 -A0
MGX-SMFIR-1-155 800-14460-02 -A0
MGX-STM1-EL-1 800-14479-02 -A0
MGX-RPM-PR-256 800-07178-02 -A0
MGX-RPM-PR-512 800-07656-02 -A0
MGX-MMF-FE 800-03202-02 -A0
MGX-RJ45-4E/B 800-12134-01 -A0
MGX-RJ45-FE 800-02735-02 -A0
MGX-AUSM-8T1/B 800-04809-01 -A0
MGX-AUSM-8E1/B 800-04810-01 -A0
AX-CESM-8E1 800-02751-02 -A0
AX-CESM-8T1 800-02750-02 -A0
MGX-CESM-8T1/B 800-08613-02 -A0
AX-FRSM-8T1 800-02437-04 -A0
AX-FRSM-8E1 800-02438-04 -A0
AX-FRSM-8T1-C 800-02461-04 -A0

18
Release Notes for Cisco MGX 8850 (PXM45), MGX 8850 (PXM1E), and MGX 8830, Software Release 3.0.10 OL-2914-01 Rev D0, July 3, 2003
System Requirements
Table 12 lists MGX 8850 (PXM1E) front and back card types and whether APS connectors are
supported.
AX-FRSM-8E1-C 800-02462-04 -A0
MGX-FRSM-HS2/B 800-17066-01 -A0
AX-SMB-8E1 800-02287-01 -A0
AX-R-SMB-8E12800-02410-01 -A0
AX-RJ48-8E1 800-02408-01 -A0
AX-R-RJ48-8E12800-02409-01 -A0
AX-RJ48-8T1 800-02286-01 -A0
AX-R-RJ48-8T12800-02288-01 -A0
MGX-12IN1-8S 800-18302-01 -A0
SCSI2-2HSSI/B3800-05463-02 -A0
800-05501-01 -A0
MGX-8850-APS-CON 800-20640-01 -A0
MGX-APS-CON 800-05307-01 -A0
1. These cards are required only if you need modular optics with the
PXM1E-COMBO back card.
2. R means that this is a redundant card.
3. The SCSI2-2HSSI/B card has two different 800 part numbers, and both part
numbers are valid.
Table 11 Card Numbers and Revisions Supported in Release 3.0.10 for MGX 8850 (PXM1E)
(continued)
Product ID 800 P/N Minimum Revision
Table 12 MGX 8850 (PXM1E) Front and Back Card Types and Supported APS Connectors
Front Card Type Back Card Types Needs APS-CON?
PXM1E-4-155 MMF-4-155/C Yes
SMFIR-4-155/C Yes
SMFLR-4-155/C Yes
PXM-UI-S3/B —
PXM1E-8-T3E3 SMB-8-T3 —
SMB-8-E3 —
PXM-UI-S3/B —
PXM1E-16-T1E1 PXM-UI-S3/B —
MCC-16-E1 —
RBBN-16-T1E1 —

19
Release Notes for Cisco MGX 8850 (PXM45), MGX 8850 (PXM1E), and MGX 8830, Software Release 3.0.10
OL-2914-01 Rev D0, July 3, 2003
System Requirements
PXM1E-COMBO (See
note below.) MGX-T3E3-155 —
MMF-1-155-SFP21—
SMFLR-1-155-SFP1—
SMFIR-1-155-SFP1—
PXM-UI-S3/B —
MGX-VISM-PR-8T1 AX-RJ48-8T1 —
AX-R-RJ48-8T1 —
MGX-VISM-PR-8E1 AX-SMB-8E1 —
AX-R-SMB-8E1 —
AX-RJ48-8E1 —
AX-R-RJ48-8E1 —
MGX-SRME MGX-SMFIR-1-155 Yes
MGX-STM1-EL-1 Yes
MGX-RPM-PR-256
MGX-RPM-PR-512 MGX-MMF-FE —
MGX-RJ45-4E/B —
MGX-RJ45-FE —
MGX-AUSM-8T1/B AX-RJ48-8T1 —
AX-R-RJ48-8T1 —
AX-RJ48-8E1 —
AX-R-RJ48-8E1 —
MGX-AUSM-8E1/B AX-SMB-8E1 —
AX-R-SMB-8E1 —
AX-RJ48-8E1 —
AX-R-RJ48-8E1 —
AX-CESM-8E1 AX-SMB-8E1 —
AX-R-SMB-8E1 —
AX-RJ48-8E1 —
AX-R-RJ48-8E1 —
MGX-CESM-8T1/B AX-RJ48-8T1 —
AX-R-RJ48-8T1 —
AX-FRSM-8T1 AX-RJ48-8T1 —
AX-R-RJ48-8T1 —
Table 12 MGX 8850 (PXM1E) Front and Back Card Types and Supported APS Connectors
(continued)
Front Card Type Back Card Types Needs APS-CON?

20
Release Notes for Cisco MGX 8850 (PXM45), MGX 8850 (PXM1E), and MGX 8830, Software Release 3.0.10 OL-2914-01 Rev D0, July 3, 2003
System Requirements
Note The PXM1E-COMBO card is also known as the PXM1E-T3E3-155 card.
MGX 8830 Product IDs and Card Types
Table 13 lists Product IDs, 800 part numbers, and revision levels for the MGX 8830.
AX-FRSM-8E1 AX-SMB-8E1 —
AX-R-SMB-8E1 —
AX-RJ48-8E1 —
AX-R-RJ48-8E1 —
AX-FRSM-8T1-C AX-RJ48-8T1 —
AX-R-RJ48-8T1 —
AX-FRSM-8E1-C AX-SMB-8E1 —
AX-R-SMB-8E1 —
AX-RJ48-8E1 —
AX-R-RJ48-8E1 —
MGX-FRSM-HS2/B SCSI2-2HSSI/B —
MGX-12IN1-8S —
1. Small form factor pluggable optical transceivers for PXM1E-COMBO back card.
Table 12 MGX 8850 (PXM1E) Front and Back Card Types and Supported APS Connectors
(continued)
Front Card Type Back Card Types Needs APS-CON?
Table 13 Card Numbers and Revisions Supported in Release 3.0.10 for MGX 8830
Product ID 800 P/N Minimum Revision
PXM1E-4-155 800-18588-03 -A0
PXM1E-8-T3E3 rta800-18590-03 -A0
PXM1E-16-T1E1 800-18658-04 -A0
PXM1E-COMBO (See
note below) 800-18604-03 -A0
MMF-4-155/C 800-07408-02 -A0
SMFIR-4-155/C 800-07108-02 -A0
SMFLR-4-155/C 800-07409-02 -A0
PXM-UI-S3/B 800-21557-01 -A0
SMB-8-T3 800-05029-02 -A0
SMB-8-E3 800-04093-02 -A0
MGX-T3E3-155 800-18698-02 -A0
MMF-1-155-SFP110-1308-01 -A0