Citizen SDC-384N User manual

D88A1/A2 SIZE=280X72mm
SDC-384N/SDC-395N
HDBD88A1101 XXX
ELECTRONIC CALCULATOR

* POWER SUPPLY English
CITIZEN model SDC-384N/SDC-395N is a dual-powered (high power
solar + back-up battery) calculator operative under any lighting conditions.
-Auto power-off function-
The calculator switches the power off automatically if there has been no
key entry for about 7 minutes.
-Battery change-
If the back-up battery needs to be changed, open the lower cabinet to
remove the old battery and insert a new battery in the indicated polarity.
After changing battery, please use a metal, elliptical object to press the
RESET pad on printed circuit board.
-Reset operation-
If the calculator is lock and further key operations becomes impossible, please
press the center on [MU]&[=] at the same time to release the condition. It will
return all setting to default setting.
*KEY INDEX English
[
CCE
ON
•] : Power on / Clear Entry / Clear key
[00→0] : Right shift key [M+] : Memory plus key
[M–] : Memory minus key [+/–] : ±Sign change key
[R
C
M] : Memory recall / Memory clear key
[MU] : Mark-up / Mark-down Key [GT] : Grand total key
[ ] : Square root key [RATE] : Tax rate setting key
[
TAX
STORE
+
] : Price with Tax key
To store tax rate when pressing [RATE] and [+TAX] keys
[
TAX
RECALL
−
] : Price without Tax key
To recall tax rate when pressing [RATE] and [-TAX] keys
A 0 2 3 F
Decimal place selection switch
– F –
– 0 – 2 – 3 –
– A –
Floating decimal mode
Fixed decimal mode
ADD–mode automatically enters the monetary decimal in
addition and subtraction calculations
5/4
Round-up / Round-off / Round-down switch
The Signs Of The Display Mean The Following:
MEMORY ： Memory TAX ： Amount of tax
–MINUS ： Minus(or negative) –TAX ： Price excluding tax
ERROR ： Overflow-error +TAX ： Price including tax
GT ： Grand total RATE ： Tax rate setting
% ： Tax rate stored
*OPERATION EXAMPLES English
1.Calculation Examples
Before performing each calculation, press the [
C
CE
ON
•] key two times.
Example Key operation Display
2 x 3 = 6 2 [x] 2 [
C
CE
ON
•] 3 [=] GT
6.
7 x 9 = 63 7 [÷] [x] 9 [=] GT 63.
300 x 27% = 81 300 [x] 27 [%] GT 81.
56
11.2 x 100% = 20%
11.2 [÷] 56 [%] GT
20.
300+(300 x 40%)=420 300 [+] 40 [%] GT 420.
300–(300 x 40%)=180 300 [–] 40 [%] GT 180.
1400 x 12% = 168 1400 [x] 12 [%] GT 168.
6 + 4 + 7.5 = 17.5 6 [+] 4 [+] 7.5 [=] GT 17.5
5 x 3 ÷ 0.2 = 75 [
C
CE
ON
•] [
C
CE
ON
•] 5 [x] 3 [÷]
0.2 [=] GT
75.
8 ÷ 4 x 3.7 + 9 =16.4 8 [÷] 4 [x] 3.7 [+] 9 [=] GT 16.4
54= 625 5 [x] [=] [=] [=] GT 625.
1 / 2 = 0.5 2 [÷] [=] GT 0.5
10)3x(2
1
+
= 0.0625
2 [x] 3 [+] 10 [÷] [=] GT 0.0625
A 0 2 3 F
144 = 12 144 [
] 12.
A 0 2 3 F
5/4
$14.90+$0.35–$1.45+
$12.05=$25.85
1490 [+] 35 [–] 145
[+] 1205 [=]
GT
145.
25.85
2.Memory Calculation
[R
C
M] [ R
C
M] [
C
CE
ON
•]
0.
12 [x] 4 [M+] 20 [÷] 2 [M–]
MEMORY
10.
[R
C
M] MEMORY
38.
A 0 2 3 F
5/4
(12 x 4) – (20 ÷ 2)
= 38
[R
C
M] [
C
CE
ON
•]
0.
3.Constant Calculation
2 + 3 = 5 2 [+] 3 [=] GT
5.
4 + 3 = 7 4 [=] GT 7.
3 x 4 = 12 3 [x] 4 [=] GT 12.
A 0 2 3 F
3 x 6 = 18 6 [=] GT 18.
4.Overflow Error Clear (SDC-395N)
12345678901234567
ERROR
1'234'567'890'123'456.
[00→0]
1'234'567'890'123'456.
[x] 10000 [=] ERROR
1’234.567890123456
1234567890123456 x
10000
= 1'234.567890123456
x 1012 [
C
CE
ON
•] [
C
CE
ON
•]
0.
5.Price Mark-Up & Down Calculation
2000+(P x 20%)=P
P= 20%-1
2000 =2'500.00
2500–2000 = 500.00
2000 [÷] 20 [MU]
[MU]
2'500.00
500.00
2000–(P x 20%)=P
P=
20%1
2000
+
=1'666.67
2000 [÷] 20 [+/–] [MU] 1'666.67
A 0 2 3 F
5/4
15000
15000-18000
x100%
= 20.00%
18000 [–] 15000 [MU] 20.00
6.GT-Memory
Pressing [GT] twice before you operate GT function.
GT 30.
GT 20.
GT 150.
GT 200.
GT 30.
GT 230.
230.
A 0 2 3 F
20 + 10 = 30
45 – 25 = 20
50 x 3 = 150
total = 200
200 x 15% = 30
200 + (200 x 15%) =
230
[GT] [GT] 20 [+] 10 [=]
45 [–] 25 [=]
50 [x] 3 [=]
[GT]
[x] 15 [%]
[GT]
[GT]
[
C
CE
ON
•]
0.
All calculation results are automatically accumulated in GT.
7.Tax Calculation
%
3 [RATE] [+TAX]
3.
+TAX
100 [+TAX]
103.
TAX
100+TAX(3%)
= 103
Tax sum = 3 [+TAX]
3.
3 = Tax sum 103 = Tax inclusive value
%
[
C
CE
ON
•] [RATE] [–TAX]
3.
–TAX
206 [–TAX]
200.
TAX
206–TAX(3%)
= 200
Tax sum = 6 [–TAX]
6.
6 = Tax sum 200 = Tax exclusive value

* ALIMENTACIÓN Español
Modelo CITIZEN SDC-384N/SDC-395N funciona gracias a un mecanismo
de doble carga (luz solar y batería de apoyo), lo cual le permite operar
bajo cualquier condición de iluminación.
-Función de desconexión automática-
La calculadora se apaga automáticamente si no ha sido utilizada durante 7
minutos aproximadamente.
-Reemplazado de la pila-
Si la pila de apoyo necestia ser reemplazada, quite los tornillos del parte
inferior y sustituya la pila gastada por una nueva. Coloque la pila en su
posición correcta, con la polaridad indicada. Después de cambiar la
batería pulse la almohadilla RESET en la tarjeta de circuito impreso con
un objeto metálico elíptico.
-Operación de reajuste-
Si la calculadora se bloquea y es imposible realizar ninguna operación, por favor
presione las teclas [MU] y [=] al mismo tiempo para desbloquearla. Esto
devolverá todos los ajustes a los valores predeterminados.
*TECLADO INFORMATIVO Español
[
CCE
ON
•] : Tecla de encendido / Borrar todo / Tecla de borrar entrada
[00→0] : Tecla de anular el digito ultimado
[M+] : Tecla de memoria positiva
[M–] : Tecla de memoria negativa [+/–] : ±Tecla de cambio de signo
[R
C
M] : Tecla de llamada de memoria / Tecla de limpieza de memoria
[MU] : Tecla de subir o bajar precios [GT] : Tecla de importe total
[RATE] : Tecla del Ajuste del Índice de la Tasa
[ ] : Tecla de raíz cuadrada
[
TAX
STORE
+
] : Precio con la tecla de tasa Para almacenar el índice de la tasa
cuando se presionan las teclas [RATE] y [+TAX]
[
TAX
RECALL
−
] : Precio sin la tecla de tasa Para recobrar el índice de la tasa
cuando se presionan las teclas [RATE] y [–TAX]
A 0 2 3 F
Selector del lugar decimal
– F –
– 0 – 2 – 3 –
– A –
Modo decimal flotante
Modo decimal flotante
Modo ADD: ingresa automáticamente el decimal
monetario en cálculos de suma y resta
5/4
Redondeo hacia arriba / Sin redondeo / Redondeo hacia abajo
Los signos del visor significan lo siguiente:
MEMORY ： Memoria TAX ： Cantidad de tasa
–MINUS ： Menos(o negativo) –TAX ： Precio excluyendo la tasa
ERROR ： Error de desbordamiento +TAX ： Precio incluyendo la tasa
GT ： Importe total RATE ： Ajuste del índice de la tasa
% ： Índice de la tasa almacenada
*EJEMPLO DE FUNCIONES Español
1.Ejemplos de calculación
Antes de efectuar cada cálculo, presionar 2 veces la tecla de [
C
CE
ON
•].
Ejemplo Operaci
ó n con la tecla Visualización
2 x 3 = 6 2 [x] 2 [
C
CE
ON
•] 3 [=] GT
6.
7 x 9 = 63 7 [÷] [x] 9 [=] GT 63.
300 x 27% = 81 300 [x] 27 [%] GT 81.
56
11.2 x 100% = 20% 11.2 [÷] 56 [%] GT
20.
300+(300 x 40%)=420 300 [+] 40 [%] GT 420.
300–(300 x 40%)=180 300 [–] 40 [%] GT 180.
1400 x 12% = 168 1400 [x] 12 [%] GT 168.
6 + 4 + 7.5 = 17.5 6 [+] 4 [+] 7.5 [=] GT 17.5
5 x 3 ÷ 0.2 = 75 [
C
CE
ON
•] [
C
CE
ON
•] 5 [x] 3 [÷]
0.2 [=] GT
75.
8 ÷ 4 x 3.7 + 9 =16.4 8 [÷] 4 [x] 3.7 [+] 9 [=] GT 16.4
54= 625 5 [x] [=] [=] [=] GT 625.
1 / 2 = 0.5 2 [÷] [=] GT 0.5
10)3x(2
1
+
= 0.0625 2 [x] 3 [+] 10 [÷] [=] GT
0.0625
A 0 2 3 F
144 = 12 144 [
] 12.
A 0 2 3 F
5/4
$14.90+$0.35–$1.45+
$12.05=$25.85
1490 [+] 35 [–] 145
[+] 1205 [=]
GT
145.
25.85
2.Cálculo de memoria
[R
C
M] [ R
C
M] [
C
CE
ON
•]
0.
12 [x] 4 [M+] 20 [÷] 2 [M–] MEMORY 10.
[R
C
M] MEMORY
38.
A 0 2 3 F
5/4
(12 x 4) – (20 ÷ 2)
= 38
[R
C
M] [
C
CE
ON
•]
0.
3.Constante
2 + 3 = 5 2 [+] 3 [=] GT 5.
4 + 3 = 7 4 [=] GT 7.
3 x 4 = 12 3 [x] 4 [=] GT 12.
A 0 2 3 F
3 x 6 = 18 6 [=] GT
18.
4.Limpieza de error de desbordamiento (SDC-395N)
12345678901234567 ERROR
1'234'567'890'123'456.
[00→0]
1'234'567'890'123'456.
[x] 10000 [=] ERROR
1’234.567890123456
1234567890123456 x
10000
= 1'234.567890123456 x
1012 [
C
CE
ON
•] [
C
CE
ON
•]
0.
5.Cálculo de subir o bajar precios
2000+(P x 20%)=P
P= 20%-1
2000 =2'500.00
2500–2000 = 500.00
2000 [÷] 20 [MU]
[MU]
2'500.00
500.00
2000–(P x 20%)=P
P=
20%1
2000
+
=1'666.67
2000 [÷] 20 [+/–] [MU] 1'666.67
A 0 2 3 F
5/4
15000
15000-18000 x100%
= 20.00%
18000 [–] 15000 [MU] 20.00
6.MEMÓRIA GT
Presionar [GT] dos veces antes de que usted operere con la función GT .
GT 30.
GT 20.
GT 150.
GT 200.
GT 30.
GT 230.
230.
A 0 2 3 F
20 + 10 = 30
45 – 25 = 20
50 x 3 = 150
total = 200
200 x 15% = 30
200 + (200 x 15%) =
230
[GT] [GT] 20 [+] 10 [=]
45 [–] 25 [=]
50 [x] 3 [=]
[GT]
[x] 15 [%]
[GT]
[GT]
[
C
CE
ON
•]
0.
Todos los resultados del cálculo son acumulados automáticamente en el GT
7.Cálculo de impuestos
%
3 [RATE] [+TAX]
3.
+TAX
100 [+TAX]
103.
TAX
100+TAX(3%)
= 103
Suma de impuesto = 3 [+TAX]
3.
3 = Suma de impuesto 103 = Valor con impuesto
%
[
C
CE
ON
•] [RATE] [–TAX]
3.
–TAX
206 [–TAX]
200.
TAX
206–TAX(3%)
= 200
Suma de impuesto = 6 [–TAX]
6.
6 = Suma de impuesto 200 = Valor sin impuesto

* FONTE DE ALIMENTACÃO Português
CITIZEN modelo SDC-384N/SDC-395N tem dupla fonte de alimentação de
energia (energia solar e bateria de reserva), permitindo operar sob qualquer
condição de iluminação.
-Função Auto power-off(desligamento automático)-
A calculadora desliga automáticamente, caso nenhum a tecla seja utilizada por
aproximadamente 7 minutos.
-Troca de bateria-
Se for necessário trocar a bateria de reserva, remova a bateria usada, abrindo a
tampa inferior e coloque uma bateria nova, observando a polaridade indicada.
Depois de trocar a bateria, use um objeto metálico e elíptico para pressionar a
tecla RESET na placa de circuito impresso.
-Operação de Reajuste-
Se a calculadora estiver bloqueada e sem possibilidades de executar as
operações principais adicionais, prima o centro [MU]&[=] ao mesmo tempo para
liberar da condição. Ela retornará todas as definições para a definição padrão.
*ÍNDICE DE TECLAS Português
[CCE
ON
•] : Tecla para Ligar / Tecla para Limpar Entrada / Limpar
[00→0] : Tecla de mudança de digito [+/–] : Tecla para mudar Sinal ±
[M+] : Tecla de mais da memoria [M–] : Tecla de menos da memoria
[R
C
M] : Tecla da rechamada da memória / Tecla para limpar a memória
[MU] : Tecla para Marca Preço para cima / baixo
[GT] : Tecla do Grande Total [ ] : Tecla de Raíz Quadrada
[RATE] : Tecla para Ajuste do Índice da Taxa
[
TAX
STORE
+
] : Preço com a Tecla de Taxa Para armazenar o índice da taxa quando
pressionadas as teclas [RATE] e [+TAX]
[
TAX
RECALL
−
] : Preço sem a Tecla de Taxa Para recuperar o índice da taxa quando
pressionadas as teclas [RATE] e [–TAX]
A 0 2 3 F
Comutador para seleção de casa decimal
– F –
– 0 – 2 – 3 –
– A –
Modalidade de decimal flutuante
Modalidade de decimal fixo
Modalidade ADICIONAR entra automaticamente a decimal
monetária em cálculos de adição e subtração
5/4
Arredondamento para cima / Truncamento / Arredondamento
para baixo
Os Sinais do Visor Significam o Seguinte:
MEMORY ： Memória TAX ： Quantia de taxa
–MINUS ： Menos(ou negativo) –TAX ： Preço excluindo a taxa
ERROR ： Erro por transbordamento +TAX ： Preço incluindo a taxa
GT ： Grande total RATE ： Ajuste do índice da taxa
% ： Índice da taxa armazenada
*EXEMPLOS DE OPERACÃO Português
1.Exemplo de calculos
Antes de executar cada cálculo, pressione a tecla [
C
CE
ON
•] 2 vezes.
Exemplo Operação com a tecla Visualização
2 x 3 = 6 2 [x] 2 [
C
CE
ON
•] 3 [=] GT
6.
7 x 9 = 63 7 [÷] [x] 9 [=] GT 63.
300 x 27% = 81 300 [x] 27 [%] GT 81.
56
11.2 x 100% = 20% 11.2 [÷] 56 [%] GT
20.
300+(300 x 40%)=420 300 [+] 40 [%] GT 420.
300–(300 x 40%)=180 300 [–] 40 [%] GT 180.
1400 x 12% = 168 1400 [x] 12 [%] GT 168.
6 + 4 + 7.5 = 17.5 6 [+] 4 [+] 7.5 [=] GT 17.5
5 x 3 ÷ 0.2 = 75 [
C
CE
ON
•] [
C
CE
ON
•] 5 [x] 3 [÷]
0.2 [=] GT
75.
8 ÷ 4 x 3.7 + 9 =16.4 8 [÷] 4 [x] 3.7 [+] 9 [=] GT 16.4
54= 625 5 [x] [=] [=] [=] GT 625.
1 / 2 = 0.5 2 [÷] [=] GT 0.5
10)3x(2
1
+
= 0.0625 2 [x] 3 [+] 10 [÷] [=] GT
0.0625
A 0 2 3 F
144 = 12 144 [
] 12.
A 0 2 3 F
5/4
$14.90+$0.35–$1.45+
$12.05=$25.85
1490 [+] 35 [–] 145
[+] 1205 [=]
GT
145.
25.85
2.Memória
[R
C
M] [ R
C
M] [
C
CE
ON
•]
0.
12 [x] 4 [M+] 20 [÷] 2 [M–] MEMORY 10.
[R
C
M] MEMORY
38.
A 0 2 3 F
5/4
(12 x 4) – (20 ÷ 2)
= 38
[R
C
M] [
C
CE
ON
•]
0.
3.Constante
2 + 3 = 5 2 [+] 3 [=] GT 5.
4 + 3 = 7 4 [=] GT 7.
3 x 4 = 12 3 [x] 4 [=] GT 12.
A 0 2 3 F
3 x 6 = 18 6 [=] GT
18.
4.Erro por transbordamento (SDC-395N)
12345678901234567 ERROR
1'234'567'890'123'456.
[00→0]
1'234'567'890'123'456.
[x] 10000 [=] ERROR
1’234.567890123456
1234567890123456 x
10000
= 1'234.567890123456 x
1012 [
C
CE
ON
•] [
C
CE
ON
•]
0.
5.Cálculo para marcação de preço para cima & para baixo
2000+(P x 20%)=P
P= 20%-1
2000 =2'500.00
2500–2000 = 500.00
2000 [÷] 20 [MU]
[MU]
2'500.00
500.00
2000–(P x 20%)=P
P=
20%1
2000
+
=1'666.67
2000 [÷] 20 [+/–] [MU] 1'666.67
A 0 2 3 F
5/4
15000
15000-18000 x100%
= 20.00%
18000 [–] 15000 [MU] 20.00
6.GT-MEMÓRIA
Pressione [GT] duas vezes antes de operar a função GT.
GT 30.
GT 20.
GT 150.
GT 200.
GT 30.
GT 230.
230.
A 0 2 3 F
20 + 10 = 30
45 – 25 = 20
50 x 3 = 150
total = 200
200 x 15% = 30
200 + (200 x 15%) =
230
[GT] [GT] 20 [+] 10 [=]
45 [–] 25 [=]
50 [x] 3 [=]
[GT]
[x] 15 [%]
[GT]
[GT]
[
C
CE
ON
•]
0.
Todos os resultados de cálculo são automaticamente acumulados em GT
7.Cálculo da Taxa
%
3 [RATE] [+TAX]
3.
+TAX
100 [+TAX]
103.
TAX
100+TAX(3%)
= 103
Soma da Taxa = 3 [+TAX]
3.
3 = Soma da Taxa 103 = Valor com taxa incluída
%
[
C
CE
ON
•] [RATE] [–TAX]
3.
–TAX
206 [–TAX]
200.
TAX
206–TAX(3%)
= 200
Soma da Taxa = 6 [–TAX]
6.
6 = Soma da Taxa 200 = Valor excluído de Taxa

File name: D88A1_A2_German vision : 10/02/24
* STROMVERSORGUNG Deutsch
Das CITIZEN Modell SDC-384N/SDC-395N wird durch 2 voneinander
unabhängigen Energiequellen versorgt (Entweder durch eine sehr starke
Solarzelle oder durch eine Batterie). Der Rechner arbeitet selbst unter
schlechtesten Lichtbedingungen.
-Automatische Ausschaltung-
Ist der Rechner 7 Minuten nicht in Betrieb, schaltet er sich automatisch ab.
-Batteriewechsel-
Soltte die batterie gewechselt werden, entfernen Sie bitte die Schrauben
vom unterteil und tauschen die alte gegen eine neue batterie aus.
Beachten Sie, daß die batterie richtig, entsprechend der polarität,
eingelegt wird. Drücken Sie nach dem Auswechseln der Batterie mit einem
runden metallenem Objekt auf das RESET Feld auf der bedruckten Platine.
-Zurücksetzen-
Falls der Taschenrechner nicht mehr reagiert und keine Tastenfunktionen
mehr verfügbar sind, drücken Sie bitte gleichzeitig auf [MU]&[=], um den
Zustand zu beheben. Dies wird alle Einstellungen auf die
Standardeinstellungen zurücksetzen.
*ERKLARUNGEN VON SCHLUSSEL Deutsch
[CCE
ON
•] : An / Eingabe löschen / Löschen Taste
[00→0] : Rechts schub taste [M+] : Speicher Plus-Taste
[M–] : Speicher Minus-Taste [+/–] : ±Vorzeicheneingabetaste
[R
C
M] : Speicher Abruf-Taste / Speicher Löschen-Taste
[MU] : Preisangabe-oben / unten Taste [GT] : Gesammtsummentaste.
[ ] : Quadratwurzeltaste [RATE] : Steuerraten-Einstellungstaste
[
TAX
STORE
+
] : Preis mit Steuern Taste Speichern der Steuerrate, wenn die Tasten
[RATE] und [+TAX] gedrückt werden
[
TAX
RECALL
−
] : Preis ohne Steuern Taste Abrufen der Steuerrate, wenn die Tasten
[RATE] und [–TAX] gedrückt werden
A 0 2 3 F
Schalter für Dezimalauswahlplatz
– F –
– 0 – 2 – 3 –
– A –
Gleitkomma-Modus
Festkomma-Modus
ADD–Modus gibt bei Additions- und Subtraktions- rechnungen
automatisch das Dezimalkomma an.
5/4
Abrundenschalter ,Aufrunden
Die Zeichen in der Anzeige haben die folgende Bedeutung:
MEMORY : Speicher TAX : Steuerbetrag
–MINUS : Minus(oder negativ) –TAX : Preis ohne Steuern
ERROR : Überflussfehler +TAX : Preis mit Steuern
GT : Gesamtsumme RATE : Steuerraten-Einstellung
% : Steuerrate gespeichert
*BEISPIEL FÜR DEN bETRIEB Deutsch
1.Berechnungsbeispiele
Drücken Sievor dem Ausführen einer Berechnung jeweils die [
C
CE
ON
•] Taste 2 mal.
Beispiel Tastenkombination Anzeige
2 x 3 = 6 2 [x] 2 [
C
CE
ON
•] 3 [=] GT
6.
7 x 9 = 63 7 [÷] [x] 9 [=] GT 63.
300 x 27% = 81 300 [x] 27 [%] GT 81.
56
11.2 x 100% = 20% 11.2 [÷] 56 [%] GT
20.
300+(300 x 40%)=420 300 [+] 40 [%] GT 420.
300–(300 x 40%)=180 300 [–] 40 [%] GT 180.
1400 x 12% = 168 1400 [x] 12 [%] GT 168.
6 + 4 + 7.5 = 17.5 6 [+] 4 [+] 7.5 [=] GT 17.5
5 x 3 ÷ 0.2 = 75 [
C
CE
ON
•] [
C
CE
ON
•] 5 [x] 3 [÷]
0.2 [=] GT
75.
8 ÷ 4 x 3.7 + 9 =16.4 8 [÷] 4 [x] 3.7 [+] 9 [=] GT 16.4
54= 625 5 [x] [=] [=] [=] GT 625.
1 / 2 = 0.5 2 [÷] [=] GT 0.5
10)3x(2
1
+
= 0.0625 2 [x] 3 [+] 10 [÷] [=] GT
0.0625
A 0 2 3 F
144 = 12 144 [
] 12.
A 0 2 3 F
5/4
$14.90+$0.35–$1.45+
$12.05=$25.85
1490 [+] 35 [–] 145
[+] 1205 [=]
GT
145.
25.85
2.Speicher
[R
C
M] [ R
C
M] [
C
CE
ON
•]
0.
12 [x] 4 [M+] 20 [÷] 2 [M–] MEMORY 10.
[R
C
M] MEMORY
38.
A 0 2 3 F
5/4
(12 x 4) – (20 ÷ 2)
= 38
[R
C
M] [
C
CE
ON
•]
0.
3.Konstant
2 + 3 = 5 2 [+] 3 [=] GT 5.
4 + 3 = 7 4 [=] GT 7.
3 x 4 = 12 3 [x] 4 [=] GT 12.
A 0 2 3 F
3 x 6 = 18 6 [=] GT
18.
4.Korrektur und überlauf-fehleer(SDC-395N)
12345678901234567 ERROR
1'234'567'890'123'456.
[00→0]
1'234'567'890'123'456.
[x] 10000 [=] ERROR
1’234.567890123456
1234567890123456 x
10000
= 1'234.567890123456 x
1012 [
C
CE
ON
•] [
C
CE
ON
•]
0.
5.Preismarkierungs auf & abrundungsrechngung
2000+(P x 20%)=P
P= 20%-1
2000 =2'500.00
2500–2000 = 500.00
2000 [÷] 20 [MU]
[MU]
2'500.00
500.00
2000–(P x 20%)=P
P=
20%1
2000
+
=1'666.67
2000 [÷] 20 [+/–] [MU] 1'666.67
A 0 2 3 F
5/4
15000
15000-18000 x100%
= 20.00%
18000 [–] 15000 [MU] 20.00
6.GT-SPEICHER
Drücken Sie zweimal [GT], bevor Sie die GT-Funktion ausführen.
GT 30.
GT 20.
GT 150.
GT 200.
GT 30.
GT 230.
230.
A 0 2 3 F
20 + 10 = 30
45 – 25 = 20
50 x 3 = 150
total = 200
200 x 15% = 30
200 + (200 x 15%) =
230
[GT] [GT] 20 [+] 10 [=]
45 [–] 25 [=]
50 [x] 3 [=]
[GT]
[x] 15 [%]
[GT]
[GT]
[
C
CE
ON
•]
0.
Alle Berechnungsergebnisse werden automatisch im GT akkumuliert.
7.Steuerberechnung
%
3 [RATE] [+TAX]
3.
+TAX
100 [+TAX]
103.
TAX
100+TAX(3%)
= 103
Steuersumme = 3 [+TAX]
3.
3 = Steuersumme 103 = Wert mit Steuersumme
%
[
C
CE
ON
•] [RATE] [–TAX]
3.
–TAX
206 [–TAX]
200.
TAX
206–TAX(3%)
= 200
Steuersumme = 6 [–TAX]
6.
6 = Steuersumme 200 = Wert ohne Steuersumme

File name: D88A1_A2_French vision : 10/02/24
* ALIMENTATION Français
CITIZEN modèle SDC-384N/SDC-395N à double alimentation (énergie solaire
haute+pile de soutien d’alimentation) qui peut opérer sous n’importe conditions de
lumière.
-Arrêt d’alimentation automatique -
L’alimentation de cette calculatrice se coupe automatiquement si laissée allumée
et non utilisée pendant environ 7 minutes.
-Remplacement de pile-
Lorsque il faut remplacer la pile,enleve les vis de l’étui bas et remplacer la pile
usée et insérer une nouvelle pile selon la polarité indiquée. Après avoir changé la
batterie, utilisez un objet elliptique en métal, pour appuyer sur le coussinet de
REAJUSTEMENT sur le panneau du circuit imprimé.
- Réinitialisation -
Si la calculatrice est verrouillée rendant impossible son utilisation, veuillez appuyez
en même temps sur les touches [MU] et [=] pour la déverrouillée. Cette action a
pour effet de réinitialiser la calculatrice avec les paramètres par défaut.
*SIGNIFICATION DES TOUCHES Français
[CCE
ON
•] : Bouton de Mise en marche / d’annulation / Touche d’annulation de l’Entrée
[00→0] : Touche de correction [M+] : Touche de mémoire plus
[M–] : Touche de mémoire moins [+/–] : ± Touche de changement de Signe
[R
C
M] : Rappeler la mémoire / Effacer la mémoire
[MU] : Touche de hausse / baisse du Prix
[GT] : Touche de Total Général [ ] : Touche Racine carrée
[RATE] : Touche de Réglage du Taux de la Taxe
[
TAX
STORE
+
] : Touche de Prix avec la Taxe Sauvegarder le taux de la taxe en
appuyant sur [RATE] (TAUX) et [+TAX] (TAXE)
[
TAX
RECALL
−
] : Touche de Prix sans la Taxe Rappeler le taux de la taxe en appuyant
sur les touches [RATE] (TAUX) et [–TAX] (TAXE)
A 0 2 3 F
Bouton de sélection d’emplacement de la Décimale
– F –
– 0 – 2 – 3 –
– A –
Mode de Décimale Flottante
Mode de Décimale Fixe
Le mode ADD entre automatiquement la décimale monétaire en
mode de calculs d’addition et de soustraction
5/4
Bouton d’Arrondi supérieur / Arrondi / Arrondi inférieur
Les signes de l’Affichage signifient ce qui suit:
MEMORY ： Mémoire TAX ： Montant de la taxe
–MINUS ： Moins(ou négatif) –TAX ： Prix excluant la taxe
GT ： Total Général +TAX ： Prix incluant la taxe
ERROR ： Erreur-Débordement % ： Taux de la taxe stockée
RATE ： Réglage du taux de la taxe
*EXEMPLES D’OPÉRATIONS Français
1.Exemples de calculs
Avant d’effectuer chaque calcul, pressez la touche [
C
CE
ON
•] 2 fois.
Exemple Touche d’Opération Affichage
2 x 3 = 6 2 [x] 2 [
C
CE
ON
•] 3 [=] GT
6.
7 x 9 = 63 7 [÷] [x] 9 [=] GT 63.
300 x 27% = 81 300 [x] 27 [%] GT 81.
56
11.2 x 100% = 20% 11.2 [÷] 56 [%] GT
20.
300+(300 x 40%)=420 300 [+] 40 [%] GT 420.
300–(300 x 40%)=180 300 [–] 40 [%] GT 180.
1400 x 12% = 168 1400 [x] 12 [%] GT 168.
6 + 4 + 7.5 = 17.5 6 [+] 4 [+] 7.5 [=] GT 17.5
5 x 3 ÷ 0.2 = 75 [
C
CE
ON
•][
C
CE
ON
•] 5 [x] 3 [÷
] 0.2
[=] GT
75.
8 ÷ 4 x 3.7 + 9 =16.4 8 [÷] 4 [x] 3.7 [+] 9 [=] GT 16.4
54= 625 5 [x] [=] [=] [=] GT 625.
1 / 2 = 0.5 2 [÷] [=] GT 0.5
10)3x(2
1
+
= 0.0625 2 [x] 3 [+] 10 [÷] [=] GT
0.0625
A 0 2 3 F
144 = 12 144 [
] 12.
A 0 2 3 F
5/4
$14.90+$0.35–$1.45+
$12.05=$25.85
1490 [+] 35 [–] 145
[+] 1205 [=]
GT
145.
25.85
2.Calcul avec mémoire
[R
C
M] [ R
C
M] [
C
CE
ON
•]
0.
12 [x] 4 [M+] 20 [÷] 2 [M–] MEMORY 10.
[R
C
M] MEMORY
38.
A 0 2 3 F
5/4
(12 x 4) – (20 ÷ 2)
= 38
[R
C
M] [
C
CE
ON
•]
0.
3.Constant Calcul
2 + 3 = 5 2 [+] 3 [=] GT 5.
4 + 3 = 7 4 [=] GT 7.
3 x 4 = 12 3 [x] 4 [=] GT 12.
A 0 2 3 F
3 x 6 = 18 6 [=] GT
18.
4.Correction et dépassement-erreur(SDC-395N)
12345678901234567
ERROR 1'234'567'890'123'456.
[00→0]
1'234'567'890'123'456.
[x] 10000 [=] ERROR 1’234.567890123456
1234567890123456 x
10000
= 1'234.567890123456 x
1012 [
C
CE
ON
•] [
C
CE
ON
•]
0.
5.Calcul de la hausse et de la baisse du prix
2000+(P x 20%)=P
P= 20%-1
2000 =2'500.00
2500–2000 = 500.00
2000 [÷] 20 [MU]
[MU]
2'500.00
500.00
2000–(P x 20%)=P
P=
20%1
2000
+
=1'666.67
2000 [÷] 20 [+/–] [MU] 1'666.67
A 0 2 3 F
5/4
15000
15000-18000 x100%
= 20.00%
18000 [–] 15000 [MU] 20.00
6.Mémoire TG
Pressez [GT] (Total Général) deux fois avant d’utiliser la fonction TG.
GT 30.
GT 20.
GT 150.
GT 200.
GT 30.
GT 230.
230.
A 0 2 3 F
20 + 10 = 30
45 – 25 = 20
50 x 3 = 150
total = 200
200 x 15% = 30
200 + (200 x 15%) =
230
[GT] [GT] 20 [+] 10 [=]
45 [–] 25 [=]
50 [x] 3 [=]
[GT]
[x] 15 [%]
[GT]
[GT]
[
C
CE
ON
•]
0.
Tous les résultats des calculs sont ajoutés automatiquement au Total Général.
7.Calcul de l’impôt
%
3 [RATE] [+TAX]
3.
+TAX
100 [+TAX]
103.
TAX
100+TAX(3%)
= 103
Le montant de la taxe = 3 [+TAX]
3.
3 = Le montant de la taxe 103 = Valeur avec avec taxe
%
[
C
CE
ON
•] [RATE] [–TAX]
3.
–TAX
206 [–TAX]
200.
TAX
206–TAX(3%)
= 200
Le montant de la taxe = 6 [–TAX]
6.
6 = Le montant de la taxe 200 = Valeur hors taxe

File name: D88A1_A2_Italian vision : 10/02/24
* Alimentazione Elettrica Italiano
II calcolatore CITIZEN model SDC-384N/SDC-395N ha due risorse di
potenza : energia solare e batteria di riserva e può funzionare sotto
qualsiasi luce.
-Spegnimento automatico-
La calcolatrice si spegne automaticamente se non immettere nessun dato
in circa 7 minuti.
-Sostituzione della batteria-
Nel caso che sia necessario sostituire la batteria,rimuovere il coperchio
inferiore, togliere la batteria vecchia e inserire una nuova nel
compartimento batteria. Dopo aver cambiato la batteria, si prega di usare
un oggetto di metallo ellittico per premere il tasto RESET (REIMPOSTA)
sullo schema del circuito stampato.
-Operazione per resettare-
Se la calcolatrice si blocca ed è impossibile effettuare una qualsiasi
operazione, si prega di premere i tasti [MU] y [=] contemporaneamente per
sbloccarla. La calcolatrice tornerà alle impostazioni iniziali.
*Indice Tasti Italiano
[CCE
ON
•] : Acceso / Tasto cancella tutto / Cancella immissione
[00→0] : Correzione [M+] : Memoria addizione
[M–] : Memoria sottrazione [+/–] : ±Tasto cambio segno
[R
C
M] : Margine / Cancellazione [MU] : Tasto rialzo / ribasso di prezzo
[GT] : Tasto somma complessiva [ ] : Tasto radice quadrata
[RATE] : Tasto di impostazione dell’Aliquota d’imposta
[
TAX
STORE
+
] : Prezzo con Tasto d’imposta Per memorizzare l’aliquota
d’imposta quando si premono i tasti [RATE] e [+TAX]
[
TAX
RECALL
−
] : Prezzo senza Tasto d’imposta Per richiamare l’aliquota
d’imposta quando si premono i tasti [RATE] e [–TAX]
A 0 2 3 F
Scambio selezione della posizione del decimale
– F –
– 0 – 2 – 3 –
– A –
Modalità decimale mobile
Modalità decimale fissa
La modalità AGGIUNGI introduce automaticamente il
decimale monetario nei calcoli di addizione e sottrazione
5/4
Scambio arrotondamento / arrotondamento per eccesso
I simboli dello Schermo di visualizzazione significano:
MEMORY ： Memoria TAX ： Somma dell’imposta
–MINUS ： Meno(o negativo) –TAX ： Prezzo esclusa l’imposta
ERROR ： Errore di traboccamento aritmetico
+TAX ： Prezzo inclusa l’imposta GT ： Somma complessiva
% ： Aliquota d’imposta memorizzata
RATE ： Impostazione dell’aliquota d’imposta
*Esampio di Operazione Italiano
1.Operazione del calcolo normale
Prima di effettuare ciascun calcolo, premere il tasto [
C
CE
ON
•] 2 volte.
Esempio Operazione con il tasto Visualizzazione
2 x 3 = 6 2 [x] 2 [
C
CE
ON
•] 3 [=] GT
6.
7 x 9 = 63 7 [÷] [x] 9 [=] GT 63.
300 x 27% = 81 300 [x] 27 [%] GT 81.
56
11.2 x 100% = 20% 11.2 [÷] 56 [%] GT
20.
300+(300 x 40%)=420 300 [+] 40 [%] GT 420.
300–(300 x 40%)=180 300 [–] 40 [%] GT 180.
1400 x 12% = 168 1400 [x] 12 [%] GT 168.
6 + 4 + 7.5 = 17.5 6 [+] 4 [+] 7.5 [=] GT 17.5
5 x 3 ÷ 0.2 = 75 [
C
CE
ON
•][
C
CE
ON
•]5 [x] 3 [÷]
0.2 [=] GT
75.
8 ÷ 4 x 3.7 + 9 =16.4 8 [÷] 4 [x] 3.7 [+] 9 [=] GT 16.4
54= 625 5 [x] [=] [=] [=] GT 625.
1 / 2 = 0.5 2 [÷] [=] GT 0.5
10)3x(2
1
+
= 0.0625 2 [x] 3 [+] 10 [÷] [=] GT
0.0625
A 0 2 3 F
144 = 12 144 [
] 12.
A 0 2 3 F
5/4
$14.90+$0.35–$1.45+
$12.05=$25.85
1490 [+] 35 [–] 145
[+] 1205 [=]
GT
145.
25.85
2.Operazione del calcolo memoria
[R
C
M] [ R
C
M] [
C
CE
ON
•]
0.
12 [x] 4 [M+] 20 [÷] 2 [M–] MEMORY 10.
[R
C
M] MEMORY
38.
A 0 2 3 F
5/4
(12 x 4) – (20 ÷ 2)
= 38
[R
C
M] [
C
CE
ON
•]
0.
3.Operzaione del calcolo costante
2 + 3 = 5 2 [+] 3 [=] GT 5.
4 + 3 = 7 4 [=] GT 7.
3 x 4 = 12 3 [x] 4 [=] GT 12.
A 0 2 3 F
3 x 6 = 18 6 [=] GT
18.
4.Cancellazione della capacità di operazione superata(SDC-395N)
12345678901234567 ERROR
1'234'567'890'123'456.
[00→0]
1'234'567'890'123'456.
[x] 10000 [=] ERROR
1’234.567890123456
1234567890123456 x
10000
= 1'234.567890123456 x
1012 [
C
CE
ON
•] [
C
CE
ON
•]
0.
5.Calcolo rialzo / Ribasso di prezzo
2000+(P x 20%)=P
P= 20%-1
2000 =2'500.00
2500–2000 = 500.00
2000 [÷] 20 [MU]
[MU]
2'500.00
500.00
2000–(P x 20%)=P
P=
20%1
2000
+
=1'666.67
2000 [÷] 20 [+/–] [MU] 1'666.67
A 0 2 3 F
5/4
15000
15000-18000 x100%
= 20.00%
18000 [–] 15000 [MU] 20.00
6.MEMORIA GT
Premendo [GT] due volte prima di attivare la funzione GT.
GT 30.
GT 20.
GT 150.
GT 200.
GT 30.
GT 230.
230.
A 0 2 3 F
20 + 10 = 30
45 – 25 = 20
50 x 3 = 150
total = 200
200 x 15% = 30
200 + (200 x 15%) =
230
[GT] [GT] 20 [+] 10 [=]
45 [–] 25 [=]
50 [x] 3 [=]
[GT]
[x] 15 [%]
[GT]
[GT]
[
C
CE
ON
•]
0.
Tutti i risultati del calcolo sono automaticamente accumulati in GT.
7.Calcolo della tassazione
%
3 [RATE] [+TAX]
3.
+TAX
100 [+TAX]
103.
TAX
100+TAX(3%)
= 103
Import della tassa = 3 [+TAX]
3.
3 = Import della tassa 103 = Valore con tassa
%
[
C
CE
ON
•] [RATE] [–TAX]
3.
–TAX
206 [–TAX]
200.
TAX
206–TAX(3%)
= 200
Import della tassa = 6 [–TAX]
6.
6 = Import della tassa 200 = Valore senza tassa

File name: D88A1_A2_Dutch vision : 10/02/24
* Stroomvoorziening Nederlands
De CITIZEN SDC-384N/SDC-395N calculator krijgt haar energie van twee soorten
batterijen: zonne-energie en reserve energie. Zij kan onder alle soorten licht werken.
-Automatische verbreking van de stroomvoorziening-
Als de calculator gedurende 7 minuten niet gebruikt wordt, zal de
Sstroomvoorziening automatisch verbroken worden.
-Het verwisselen van de batterijen-
Wanneer u de batterijvakje wilt verwisselen, moet u eerst het deksel van het
batterijvakje openen en de oude batterijen verwijderen, en daarna de nieuwe
batterijen in het vakje plaatsen. Na het veranderen van de batterij, gebruikt u een
metalen elliptisch voorwerp om op het RESET pad van het gedrukte circuitbord te
drukken.
-Reset bediening-
Wanneer de calculator is vergrendeld en toetshandelingen niet meer mogelijk zijn,
druk dan tegelijkertijd het centrum op [MU] & [=] om deze stand op te heffen. Dit zet
alle instellingen terug naar de standaardinstelling.
*Lijst van druktoetsen Nederlands
[
CCE
ON
•] : Inschakelen / Wissen / Invoer wissen
[00→0] : Veranderen [M+] : Geheugen optellen
[M–] : Geheugen aftrekken [
] : Vierkantswortel-toets
[+/–] : ± Toets voor het veranderen van teken
[R
C
M] : Geheugen / Schrappen [GT] : Toets voor het volledig totaal
[MU] : Toets voor afgeprijsde en verhoogde prijs
[RATE] : Toets voor het instellen van het belastingstarief
[
TAX
STORE
+
] : Toets voor de prijs met belasting om het belastingstarief op te slaan
wanneer u op de toetsen [RATE] en [+TAX] drukt
[
TAX
RECALL
−
] : Toets voor de prijs zonder belasting om het belastingstarief op te
vragen wanneer u op de toetsen [RATE] en [–TAX] drukt
A 0 2 3 F
Schakelaar voor de selectie van de decimale plaatsen
– F –
– 0 – 2 – 3 –
– A –
Drijvende komma decimale modus
Vaste komma decimale modus
De optelmodus gaat automatisch over naar de monetaire decimale
modus bij het optellen en aftrekken
5/4
Schakelaar voor het naar boven / naar beneden afronden
De tekens op het beeldscherm hebben de volgende betekenis:
MEMORY ： Geheugen TAX ： Bedrag van belasting
–MINUS ： Min(of negatief) –TAX ： Prijs zonder belasting
ERROR ： Overflow fout +TAX ： Prijs met belasting
GT ： Volledig totaal RATE ： Belastingstarief instellen
% ： Belastingstarief opslaan
*Voorbeelden van bediening bij gebruik Nederlands
1.Voorbeeldberekeningen
Druk tweemaal op de [
C
CE
ON
•] toets alvorens een bewerking uit te voeren.
Voorbeeld Ingedrukte toetsen Weergaveophet scherm
2 x 3 = 6 2 [x] 2 [
C
CE
ON
•] 3 [=] GT
6.
7 x 9 = 63 7 [÷] [x] 9 [=] GT 63.
300 x 27% = 81 300 [x] 27 [%] GT 81.
56
11.2 x 100% = 20% 11.2 [÷] 56 [%] GT
20.
300+(300 x 40%)=420 300 [+] 40 [%] GT 420.
300–(300 x 40%)=180 300 [–] 40 [%] GT 180.
1400 x 12% = 168 1400 [x] 12 [%] GT 168.
6 + 4 + 7.5 = 17.5 6 [+] 4 [+] 7.5 [=] GT 17.5
5 x 3 ÷ 0.2 = 75 [
C
CE
ON
•] [
C
CE
ON
•] 5 [x] 3 [÷]
0.2 [=] GT
75.
8 ÷ 4 x 3.7 + 9 =16.4 8 [÷] 4 [x] 3.7 [+] 9 [=] GT
16.4
54= 625 5 [x] [=] [=] [=] GT 625.
1 / 2 = 0.5 2 [÷] [=] GT 0.5
10)3x(2
1
+
= 0.0625 2 [x] 3 [+] 10 [÷] [=] GT
0.0625
A 0 2 3 F
144 = 12 144 [
] 12.
A 0 2 3 F
5/4
$14.90+$0.35–$1.45+
$12.05=$25.85
1490 [+] 35 [–] 145
[+] 1205 [=]
GT
145.
25.85
2.Geheugenberekeningen
[R
C
M] [ R
C
M] [
C
CE
ON
•]
0.
12 [x] 4 [M+] 20 [÷] 2 [M–] MEMORY 10.
[R
C
M] MEMORY
38.
A 0 2 3 F
5/4
(12 x 4) – (20 ÷ 2)
= 38
[R
C
M] [
C
CE
ON
•]
0.
3.Berekeningen met een constante
2 + 3 = 5 2 [+] 3 [=] GT 5.
4 + 3 = 7 4 [=] GT 7.
3 x 4 = 12 3 [x] 4 [=] GT 12.
A 0 2 3 F
3 x 6 = 18 6 [=] GT
18.
4.Het schrappen van ingetoetste getallen die de
cberekeningcapaciteit overschrijden (SDC-395N)
12345678901234567 ERROR
1'234'567'890'123'456.
[00→0]
1'234'567'890'123'456.
[x] 10000 [=] ERROR
1’234.567890123456
1234567890123456 x
10000
= 1'234.567890123456 x
1012 [
C
CE
ON
•] [
C
CE
ON
•]
0.
5.Berekening van de afgeprijsde of verhoogde prijs
2000+(P x 20%)=P
P= 20%-1
2000 =2'500.00
2500–2000 = 500.00
2000 [÷] 20 [MU]
[MU]
2'500.00
500.00
2000–(P x 20%)=P
P=
20%1
2000
+
=1'666.67
2000 [÷] 20 [+/–] [MU] 1'666.67
A 0 2 3 F
5/4
15000
15000-18000 x100%
= 20.00%
18000 [–] 15000 [MU] 20.00
6.GT-GEHEUGEN
Druk tweemaal op [GT] alvorens bewerkingen met de GT-functie te beginnen.
GT
30.
GT 20.
GT
150.
GT 200.
GT 30.
GT 230.
230.
A 0 2 3 F
20 + 10 = 30
45 – 25 = 20
50 x 3 = 150
total = 200
200 x 15% = 30
200 + (200 x 15%) =
230
[GT] [GT] 20 [+] 10 [=]
45 [–] 25 [=]
50 [x] 3 [=]
[GT]
[x] 15 [%]
[GT]
[GT]
[
C
CE
ON
•]
0.
Alle berekeningsresultaten worden automatisch in het GT-geheugen geaccumuleerd.
7.Berekening van belastingen
%
3 [RATE] [+TAX]
3.
+TAX
100 [+TAX]
103.
TAX
100+TAX(3%)
= 103
Belastingbedrag = 3 [+TAX]
3.
3 = Belastingbedrag 103 = De waarde inclusief belastingtarief
%
[
C
CE
ON
•] [RATE] [–TAX]
3.
–TAX
206 [–TAX]
200.
TAX
206–TAX(3%)
= 200
Belastingbedrag = 6 [–TAX]
6.
6 = Belastingbedrag 200 = De waarde exclusief belastingtarief

File name: D88A1_A2_Danish vision : 04/02/12
* Strømforsyningen Danish
CITIZEN SDC-384N/SDC-395N regnemaskine er forsynet af to typer
batterier : Solceller og reservebatteriet, hvilken gør det muligt at bruge
regnemaskinen med ethvert baggrundslys.
-Stop stramforsyningen automatisk-
Lommeregneren slukker automatisk for strømmen, hvis der ikke har været
trykket på en tast i ca. 7 minutter.
-Skift batteriet-
Når batteriet skal skiftes, åbner man låget nedenunder, tager batteriet ud,
og sætter det nye batteri på plads. Efter batteriskift, anvend venligst en
elliptisk genstand til at trykke på RESET på printpladen.
-Nulstillingsfunktion-
Hvis lommeregneren låser sig fast, og yderligere tastefunktioner bliver
umulige, så tryk på midten af [MU]&[=] samtidigt for at løse tilstanden. Det
sætter alle indstillinger tilbage til fabriksindstillingen.
*Knappers indeks Danish
[CCE
ON
•] : Tænd / Slet / Slet indtastning [00→0] : Rettelse knap
[M+] : Addition hukommelse knap
[M–] : Subtraktion hukommelse knap [+/–] : ±Skift fortegn
[R
C
M] : Hukommelse knap / Slettelse knap
[MU] : Prismærke op / ned [GT] : Grand total tast
[ ] : Kvadratrod tast [RATE] : Tast til indstilling af moms sats
[
TAX
STORE
+
] : Tast til pris med moms
Lagring af moms sats ved tryk på [RATE] og [+TAX] taster
[
TAX
RECALL
−
] : Tast til pris uden moms
Genkald af moms sats ved tryk på [RATE] og [–TAX] taster
A 0 2 3 F
Knap til valg af decimalplads
– F –
– 0 – 2 – 3 –
– A –
Flydende decimaltaltilstand
Fast decimaltaltilstand
ADD–mode indtaster automatisk valutadecimalen i
additions- og subtraktionsberegninger
5/4
Knap til rund op / rund af / rund ned
Tegnene på displayet har følgende betydning:
MEMORY ： Hukommelse TAX ： Moms mængde
–MINUS ： Minus(eller negativ) –TAX ： Pris eksklusiv moms
ERROR ： Overløbsfejl +TAX ： Pris inklusiv moms
GT ： Grand total RATE ： Moms sats indstilling
% ： Moms sats lagret
*Betjening eksempler Danish
1.Almindelig regningsoperation
Før hver beregning, tryk på [
C
CE
ON
•]tasten to gange.
Eksempel Tastebetjening Vis
2 x 3 = 6 2 [x] 2 [
C
CE
ON
•] 3 [=] GT
6.
7 x 9 = 63 7 [÷] [x] 9 [=] GT 63.
300 x 27% = 81 300 [x] 27 [%] GT 81.
56
11.2 x 100% = 20% 11.2 [÷] 56 [%] GT
20.
300+(300 x 40%)=420 300 [+] 40 [%] GT 420.
300–(300 x 40%)=180 300 [–] 40 [%] GT 180.
1400 x 12% = 168 1400 [x] 12 [%] GT 168.
6 + 4 + 7.5 = 17.5 6 [+] 4 [+] 7.5 [=] GT 17.5
5 x 3 ÷ 0.2 = 75 [
C
CE
ON
•] [
C
CE
ON
•] 5 [x] 3 [÷]
0.2 [=] GT
75.
8 ÷ 4 x 3.7 + 9 =16.4 8 [÷] 4 [x] 3.7 [+] 9 [=] GT 16.4
54= 625 5 [x] [=] [=] [=] GT 625.
1 / 2 = 0.5 2 [÷] [=] GT 0.5
10)3x(2
1
+
= 0.0625 2 [x] 3 [+] 10 [÷] [=] GT
0.0625
A 0 2 3 F
144 = 12 144 [
] 12.
A 0 2 3 F
5/4
$14.90+$0.35–$1.45+
$12.05=$25.85
1490 [+] 35 [–] 145
[+] 1205 [=]
GT
145.
25.85
2.Hukommelse regningsoperation
[R
C
M] [ R
C
M] [
C
CE
ON
•]
0.
12 [x] 4 [M+] 20 [÷] 2 [M–] MEMORY 10.
[R
C
M] MEMORY
38.
A 0 2 3 F
5/4
(12 x 4) – (20 ÷ 2)
= 38
[R
C
M] [
C
CE
ON
•]
0.
3.Regningssystem for konstanter
2 + 3 = 5 2 [+] 3 [=] GT 5.
4 + 3 = 7 4 [=] GT 7.
3 x 4 = 12 3 [x] 4 [=] GT 12.
A 0 2 3 F
3 x 6 = 18 6 [=] GT
18.
4.Slet delen over regningskapaciteten(SDC-395N)
12345678901234567
ERROR
1'234'567'890'123'456.
[00→0]
1'234'567'890'123'456.
[x] 10000 [=] ERROR
1’234.567890123456
1234567890123456 x
10000
= 1'234.567890123456
x 1012 [
C
CE
ON
•] [
C
CE
ON
•]
0.
5.Beregning med prismærke op & ned
2000+(P x 20%)=P
P= 20%-1
2000 =2'500.00
2500–2000 = 500.00
2000 [÷] 20 [MU]
[MU]
2'500.00
500.00
2000–(P x 20%)=P
P=
20%1
2000
+
=1'666.67
2000 [÷] 20 [+/–] [MU] 1'666.67
A 0 2 3 F
5/4
15000
15000-18000 x100%
= 20.00%
18000 [–] 15000 [MU] 20.00
6.GT-HUKOMMELSE
To tryk på [GT] før anvendelse af GT funktion.
GT 30.
GT 20.
GT 150.
GT 200.
GT 30.
GT 230.
230.
A 0 2 3 F
20 + 10 = 30
45 – 25 = 20
50 x 3 = 150
total = 200
200 x 15% = 30
200 + (200 x 15%) =
230
[GT] [GT] 20 [+] 10 [=]
45 [–] 25 [=]
50 [x] 3 [=]
[GT]
[x] 15 [%]
[GT]
[GT]
[
C
CE
ON
•]
0.
Alle beregningsresultater akkumuleres automatisk i GT.
7.Afgiftsberegning
%
3 [RATE] [+TAX]
3.
+TAX
100 [+TAX]
103.
TAX
100+TAX(3%)
= 103
Skatte tal = 3 [+TAX]
3.
3 = Skatte tal 103 = Værdien inklusive skatteprocent
%
[
C
CE
ON
•] [RATE] [–TAX]
3.
–TAX
206 [–TAX]
200.
TAX
206–TAX(3%)
= 200
Skatte tal = 6 [–TAX]
6.
6 = Skatte tal 200 = Værdien undtagen skatteprocent

File name: D88A1_A2_Russian vision : 10/02/24
* СНАБЖЕНИЕ ЭНЕРГИЕЙ Русский
Модель CITIZEN SDC-384N/SDC-395N имеет двойное питание
(солнечные элементы + батарея) испособна работать при любом
освещении.
-Автоматическое отключение питания-
Этот калькулятор обладает функцией автоматического отключения
электропитания, благодаря чему питание отключается, если втечение
7 минут не производилось никаки операций на клавиша .
-Замена элементов питания-
Благодаря двойному питанию, батареи, установленные собратной
стороны устройства, работают длительное время. Если изображение
на дисплее становится неясным, необ одимо заменить батареи.
Снимите крышку снижнего отсека. Извлеките старые батареи и
вставьте новые батареи, соблюдая полярность. После замены
батареек, спомощью тонкого металлического предмета нажмите
кнопку RESET на печатной плате.
-Оперативный сброс-
Если калькулятор «завис» идальнейшие операции скнопками стали
невозможны, для устранения этого состояния нажмите одновременно
среднюю кнопку [MU] и[=]. Это вернет все настройки ви ис одное
состояние.
*НАЗНАЧЕНИЕ КЛАВИШ Русский
[CCE
ON
•] : Включение питания / Сброс числа / Сброс все значений
[00→0] : Клавиша «забой» (клавиша правки числа)
[M+] : Клавиша прибавления врегистр памяти
[M–] : Клавиша вычитания из регистра памяти
[+/–] : ±Перемена знака
[R
C
M] : Клавиша извлечения числа из памяти / Клавиша сброса памяти
[MU] : Рост/падение цены [GT] : Клавиша общей суммы
[ ] : Клавиша извлечения квадратного корня.
[RATE] : Клавиша ввода уровня налога
[
TAX
STORE
+
] : Клавиша ввода цены сналогом
Для записи цены сналогом нажмите клавиши [RATE] и[+TAX]
[
TAX
RECALL
−
] : Клавиша вызова цены без налога
Для вызова нажмите клавиши [RATE] и[-TAX]
A 0 2 3 F
Переключатель места десятичного знака
– F –
– 0 – 2 – 3 –
– A –
Режим плавающей запятой
Режим фиксированной запятой
Режим ADD–автоматический ввод дву десятичны
знаков при сложении ивычитании денежны сумм
5/4
Округление ввер / Округление / Округление вниз
Значение индикаторов экрана:
MEMORY ： Память TAX ： Сумма налога
–MINUS ： Минус (или отрицательное число)
–TAX ： Цена без налога ERROR ： Ошибка переполнения
+TAX ： Цена сналогом GT ： Общая сумма
TAX% ： Записанный уровень налога RATE ： Ввод уровня налога
*ПРИМЕР Русский
1.Примеры расчётов
Перед началом вычислений нажмите клавишу [
CCE
ON
•] 2 раза.
Пример Клавиши Экран
2 x 3 = 6 2 [x] 2 [
C
CE
ON
•] 3 [=] GT
6.
7 x 9 = 63 7 [÷] [x] 9 [=] GT 63.
300 x 27% = 81 300 [x] 27 [%] GT 81.
56
11.2 x 100% = 20% 11.2 [÷] 56 [%] GT
20.
300+(300 x 40%)=420 300 [+] 40 [%] GT 420.
300–(300 x 40%)=180 300 [–] 40 [%] GT 180.
1400 x 12% = 168 1400 [x] 12 [%] GT 168.
6 + 4 + 7.5 = 17.5 6 [+] 4 [+] 7.5 [=] GT 17.5
5 x 3 ÷ 0.2 = 75 [
C
CE
ON
•] [
C
CE
ON
•] 5 [x] 3 [÷]
0.2 [=] GT
75.
8 ÷ 4 x 3.7 + 9 =16.4 8 [÷] 4 [x] 3.7 [+] 9 [=] GT 16.4
54= 625 5 [x] [=] [=] [=] GT 625.
1 / 2 = 0.5 2 [÷] [=] GT 0.5
10)3x(2
1
+
= 0.0625 2 [x] 3 [+] 10 [÷] [=] GT
0.0625
A 0 2 3 F
144 = 12 144 [
] 12.
A 0 2 3 F
5/4
$14.90+$0.35–$1.45+
$12.05=$25.85
1490 [+] 35 [–] 145
[+] 1205 [=]
GT
145.
25.85
2.Операции спамятью
[R
C
M] [ R
C
M] [
C
CE
ON
•]
0.
12 [x] 4 [M+] 20 [÷] 2 [M–] MEMORY 10.
[R
C
M] MEMORY
38.
A 0 2 3 F
5/4
(12 x 4) – (20 ÷ 2)
= 38
[R
C
M] [
C
CE
ON
•]
0.
3.Вычисления сконстантой
2 + 3 = 5 2 [+] 3 [=] GT 5.
4 + 3 = 7 4 [=] GT 7.
3 x 4 = 12 3 [x] 4 [=] GT 12.
A 0 2 3 F
3 x 6 = 18 6 [=] GT
18.
4.Исправление ошибок исброс ошибки при избытке числовых
знаков (SDC-395N) 12345678901234567 ERROR
1'234'567'890'123'456.
[00→0]
1'234'567'890'123'456.
[x] 10000 [=] ERROR
1’234.567890123456
1234567890123456 x
10000
= 1'234.567890123456 x
1012 [
C
CE
ON
•] [
C
CE
ON
•]
0.
5.РАСЧЕТ РОСТА ИПАДЕНИЯ ЦЕН
2000+(P x 20%)=P
P= 20%-1
2000 =2'500.00
2500–2000 = 500.00
2000 [÷] 20 [MU]
[MU]
2'500.00
500.00
2000–(P x 20%)=P
P=
20%1
2000
+
=1'666.67
2000 [÷] 20 [+/–] [MU] 1'666.67
A 0 2 3 F
5/4
15000
15000-18000 x100%
= 20.00%
18000 [–] 15000 [MU] 20.00
6.ПАМЯТЬ GT
Для пере ода врежим GT нажмите клавишу [GT] два раза.
GT 30.
GT 20.
GT 150.
GT 200.
GT 30.
GT 230.
230.
A 0 2 3 F
20 + 10 = 30
45 – 25 = 20
50 x 3 = 150
total = 200
200 x 15% = 30
200 + (200 x 15%) =
230
[GT] [GT] 20 [+] 10 [=]
45 [–] 25 [=]
50 [x] 3 [=]
[GT]
[x] 15 [%]
[GT]
[GT]
[
C
CE
ON
•]
0.
Результаты все вычислений накапливаются впамяти GT.
7.Вычисление налогов
%
3 [RATE] [+TAX]
3.
+TAX
100 [+TAX]
103.
TAX
100+TAX(3%)
= 103
Сумма налога = 3 [+TAX]
3.
3 = сумма налога 103 = сумма сналогом
%
[
C
CE
ON
•] [RATE] [–TAX]
3.
–TAX
206 [–TAX]
200.
TAX
206–TAX(3%)
= 200
Сумма налога = 6 [–TAX]
6.
6 = сумма налога 200= сумма без налога

File name: D88A1_A2_Polish vision : 10/02/24
* ZASILANIE Polish
Kalkulator CITIZEN model SDC-384N/SDC-395N jest zasilany podwójnie (bateria
słoneczna + bateria zwykła) Kalkulator pracuje w każdych warunkach oświetlenia.
-Funkcja automatycznego wylączenia-
Kalkulator wylącza sięautomatycznie w przypadku jeśli żaden z przycisków nie
zostanie naciśnlety w ciągu 7 minut.
-Wymiana baterii-
Jeśli konieczna jest wymiana baterii należy otworzyćdolnąuwagęna odpowiednia
polaryzacje.pokrywę, usunaćstare baterie i wlożyċnowe zwracając. Po wymianie
baterii proszęnacisnąć przycisk RESET na płytce drukowanej przy pomocy
cienkiego metalowego przedmiotu.
-Operacja wymazywania-
Jeśli kalkulator zostanie zablokowany i dalsze działania przy użyciu przycisków
stanąsięniemożliwe, proszęwciśnąć w tym samym czasie środek [MU]&[=] aby
przywrócićdo stanu użyteczności. Kalkulator powróci do ustawieńwyjściowych.
*OPIS KLAWISZY Polish
[CCE
ON
•] : Zasilanie / Kasowanie zawartości pamięci / Kasowanie liczby
[00→0] : Klawisz powrotu
[M+] : Przycisk wprowadzenia do pamięci ze znakiem plus
[M–] : Przycisk wprowadzenia do pamięci ze znakiem minus
[R
C
M] : Klawisz MR (Klawisz wywolania z pamięci) / Klawisz MC (Klawisz kasowania
pamięci)
[MU] : Przyrost / obniżka cen [GT] : Klawisz sumy ogółem
[+/–] : ±Zmiana znaku [ ] : Klawisz pierwiastka
[RATE] : Wprowadzenie wysokości podatku
[
TAX
STORE
+
] : Cena z podatkiem Aby zapisaćwysokość podatku, naciśnij klawisze
[RATE] i [+TAX].
[
TAX
RECALL
−
] : Cena bez podatku Aby wywołaćz pamięci wysokość podatku,
naciśnij klawisze [RATE] i [-TAX].
A 0 2 3 F
Przełącznik liczby miejsc po przecinku
– F –
– 0 – 2 – 3 –
– A –
Tryb zmiennej liczby miejsc po przecinku
Tryb stałej liczby miejsc po przecinku
Tryb ADD–Automatycznie wstawianie dwuch znaków po
przecinku dziesiętnym pod czas dodawania lub odejmowania
sum pieniężnych
5/4
Zaokrąglenie w dół / Zaokrąglenie w górę/ Przełącznik trybu
zaokrąglenia
Znaczenie wskaźników wyświetlacza:
MEMORY ： Pamięć TAX ： Suma podatku
–MINUS ： Minus (lub liczba ujemna) –TAX ： Cena bez podatku
ERROR ： Błąd przepełnienia +TAX ： Cena z podatkiem
% ： Zapisana do pamięci wysokość podatku GT ： Suma ogółem
RATE ： Wprowadzenie wysokości podatku
*PRZYKLADY DZIALAŃPolish
1.Przykladowe obliczenia
Przed rozpoczęciem obliczeńnależy nacisnąć klawisz [
C
CE
ON
•] 2 razy.
Przykład Klawisze Ekran
2 x 3 = 6 2 [x] 2 [
C
CE
ON
•] 3 [=] GT
6.
7 x 9 = 63 7 [÷] [x] 9 [=] GT 63.
300 x 27% = 81 300 [x] 27 [%] GT 81.
56
11.2 x 100% = 20% 11.2 [÷] 56 [%] GT
20.
300+(300 x 40%)=420 300 [+] 40 [%] GT 420.
300–(300 x 40%)=180 300 [–] 40 [%] GT 180.
1400 x 12% = 168 1400 [x] 12 [%] GT 168.
6 + 4 + 7.5 = 17.5 6 [+] 4 [+] 7.5 [=] GT 17.5
5 x 3 ÷ 0.2 = 75 [
C
CE
ON
•] [
C
CE
ON
•] 5 [x] 3 [÷]
0.2 [=] GT
75.
8 ÷ 4 x 3.7 + 9 =16.4 8 [÷] 4 [x] 3.7 [+] 9 [=] GT
16.4
54= 625 5 [x] [=] [=] [=] GT 625.
1 / 2 = 0.5 2 [÷] [=] GT 0.5
10)3x(2
1
+
= 0.0625 2 [x] 3 [+] 10 [÷] [=] GT
0.0625
A 0 2 3 F
144 = 12 144 [
] 12.
A 0 2 3 F
5/4
$14.90+$0.35–$1.45+
$12.05=$25.85
1490 [+] 35 [–] 145
[+] 1205 [=]
GT
145.
25.85
2.Obliczenia z wykorzystaniem pamięci
[R
C
M] [ R
C
M] [
C
CE
ON
•]
0.
12 [x] 4 [M+] 20 [÷] 2 [M–] MEMORY 10.
[R
C
M] MEMORY
38.
A 0 2 3 F
5/4
(12 x 4) – (20 ÷ 2)
= 38
[R
C
M] [
C
CE
ON
•]
0.
3.Stala
2 + 3 = 5 2 [+] 3 [=] GT 5.
4 + 3 = 7 4 [=] GT 7.
3 x 4 = 12 3 [x] 4 [=] GT 12.
A 0 2 3 F
3 x 6 = 18 6 [=] GT
18.
4.Przepełnienie pamięci (SDC-395N)
12345678901234567 ERROR
1'234'567'890'123'456.
[00→0]
1'234'567'890'123'456.
[x] 10000 [=] ERROR
1’234.567890123456
1234567890123456 x
10000
= 1'234.567890123456 x
1012 [
C
CE
ON
•] [
C
CE
ON
•]
0.
5.Przyrost i obniżka cen
2000+(P x 20%)=P
P= 20%-1
2000 =2'500.00
2500–2000 = 500.00
2000 [÷] 20 [MU]
[MU]
2'500.00
500.00
2000–(P x 20%)=P
P=
20%1
2000
+
=1'666.67
2000 [÷] 20 [+/–] [MU] 1'666.67
A 0 2 3 F
5/4
15000
15000-18000 x100%
= 20.00%
18000 [–] 15000 [MU] 20.00
6.PAMIĘĆ GT
Aby przejść do obliczeńw trybie GT, naciśnij [GT] dwa razy.
GT 30.
GT 20.
GT 150.
GT 200.
GT 30.
GT 230.
230.
A 0 2 3 F
20 + 10 = 30
45 – 25 = 20
50 x 3 = 150
total = 200
200 x 15% = 30
200 + (200 x 15%) =
230
[GT] [GT] 20 [+] 10 [=]
45 [–] 25 [=]
50 [x] 3 [=]
[GT]
[x] 15 [%]
[GT]
[GT]
[
C
CE
ON
•]
0.
Wszystkie wyniki obliczeńbędąautomatycznie zapisane w pamięci GT
7.Obliczenie podatku
%
3 [RATE] [+TAX]
3.
+TAX
100 [+TAX]
103.
TAX
100+TAX(3%)
= 103
Suma podatku = 3 [+TAX]
3.
3 = Suma podatku 103 = Inkluzywna wysokość podatku
%
[
C
CE
ON
•] [RATE] [–TAX]
3.
–TAX
206 [–TAX]
200.
TAX
206–TAX(3%)
= 200
Suma podatku = 6 [–TAX]
6.
6 = Suma podatku 200 = Ekskluzywna wysokość podatku

File name : D88A1_A2_Arabic vision : 10/02/24
ﺔﻗﺎﻄﻟا ﺪﻳوﺰﺗ*
ﺔ
ﻴﺑﺮﻋ ﺔﻐﻟ
إﻞﻳدﻮﻣ نCITIZEN SDC-384N/SDC-395Nﺔﻗﺎﻄﻟا ﺔﻴﺋﺎﻨﺛ ﺔﺒﺳﺎﺣ ﺔﻟﺁ ﻲه)ﺔﻴﺴﻤﺸﻟا ﺔﻗﺎﻄﻟا
ةﻮﻘﻟا ﺔﻴﻟﺎﻋ+ﺔﻴﻃﺎﻴﺘﺣا ﺔﻳرﺎﻄﺑ(ﺔﻴﺋﻮﺿ فوﺮﻇ ﺔﻳأ ﺖﺤﺗ ﻞﻤﻌﺗو.
-ﻲﺋﺎﻘﻠﺘﻟا ﺔﻗﺎﻄﻟا فﺎﻘﻳإ ﺔﻔﻴﻇو-
ﻴﺋﺎﻘﻠﺗ ﺎﻬﺴﻔﻧ فﺎﻘﻳﺈﺑ ﺔﺒﺳﺎﺤﻟا ﺔﻟﻵا ﻩﺬه مﻮﻘﺗﻲﻟاﻮﺤﻟ حﺎﺘﻔﻣ لﺎﺧدإ ثﺪﺤﻳ ﻢﻟ اذإ ًﺎ7ﻖﺋﺎﻗد.
-ﺔﻳرﺎﻄﺒﻟا ﺮﻴﻴﻐﺗ-
لﺎﺧدإو ﺔﻤﻳﺪﻘﻟا ﺔﻳرﺎﻄﺒﻟا ﺔﻟازﻹ ﻲﻠﻔﺴﻟا ءﺎﻄﻐﻟا ﺢﺘﻔﺑ ﻢﻗ ،ﺮﻴﻴﻐﺗ ﻰﻟإ ﺔﺟﺎﺤﺑ ﺔﻴﻃﺎﻴﺘﺣﻻا ﺔﻳرﺎﻄﺒﻟا ﺖﻧﺎآ اذإ
ﺎﻬﻴﻟإ رﺎﺸﻤﻟا ﺔﻴﺒﻄﻘﻟا ﺐﺴﺤﺑ ةﺪﻳﺪﺟ ﺔﻳرﺎﻄﺑ.ًﺎﻳوﺎﻀﻴﺑو ًﺎﻴﻧﺪﻌﻣ ًﺎ ﺌ ﻴ ﺷ ماﺪﺨﺘﺳا ءﺎﺟﺮﻟا ،ﺔﻳرﺎﻄﺒﻟا ﺮﻴﻴﻐﺗ ﺪﻌﺑ
عﻮﺒﻄﻤﻟا ةراﺪﻟا حﻮﻟ ﻰﻠﻋ ﻦﻴﻴﻌﺘﻟا ةدﺎﻋإ حﺎﺘﻔﻣ ﻰﻠﻋ ﻂﻐﻀﻠﻟ.
-ﻞﻴﻐﺸﺗ ﻞﻀﻓأ-
ﻰﻠﻋ ﻂﻐﻀﻟا ءﺎﺟﺮﻟا رارزﻷﺎﺑ تﺎﻴﻠﻤﻋ ﺬﻴﻔﻨﺗ رﺬﻌﺗو ،ﺔﺒﺳﺎﺤﻟا ﺔﻟﻵا ﻞﻔﻗ ﺔﻟﺎﺣ ﻲﻓ[MU]&[=]ﻲﻓﺲﻔﻧ
ﺔﻠﻜﺸﻤﻟا ﻩﺬه ﻞﺤﻟ ﺖﻗﻮﻟا.ﻲﺿاﺮﺘﻓﻻا ﻂﺒﻀﻟا ﻰﻟإ عﺎﺿوﻷا ﻞآ اﺬه ﺪﻴﻌﻴﺳ.
حﺎﺘﻔﻤﻟا سﺮﻬﻓ
*
ﺔ
ﻴﺑﺮﻋ ﺔﻐﻟ
]
CCE
ON
•
[:لﺎﺧدﻹا فﺬﺣ/ﻞﻜﻟا فﺬﺣ حﺎﺘﻔﻣ/ﺔﻗﺎﻄﻟا ﻞﻴﻐﺸﺗ.
[00→0]:ﻞﻳﻮﺤﺘﻟﺎﺑ عﻮﺟﺮﻟا حﺎﺘﻔﻣ.[M+]:ةﺮآاﺬﻟا ﻰﻠﻋ ﺔﻓﺎﺿﻹا حﺎﺘﻔﻣ.
[M-]:ةﺮآاﺬﻟا ﻦﻣ حﺮﻄﻟا حﺎﺘﻔﻣ.
]
R
C
M
[:ةﺮآاﺬﻟا ءﺎﻋﺪﺘﺳا حﺎﺘﻔﻣ/ةﺮآاﺬﻟا فﺬﺣ حﺎﺘﻔﻣ.
±:[+ / –]ةرﺎﺷﻹا ﺮﻴﻴﻐﺗ حﺎﺘﻔﻣ[MU]:ﻰﻠﻋﻷا ﻰﻟإ ﺮﻌﺴﻟا ﻢﻴﻠﻌﺗ حﺎﺘﻔﻣ/ﻞﻔﺳﻷا.
]GT: [ﻲﻟﺎﻤﺟﻹا عﻮﻤﺠﻤﻟا حﺎﺘﻔﻣ ]
[:ﻲﻌﻴﺑﺮﺘﻟا رﺬﺠﻟا حﺎﺘﻔﻣ
[RATE]:ﺔﺒﻳﺮﻀﻟا ﻢﺳر داﺪﻋإ حﺎﺘﻔﻣ
]
TA
X
RECALL
−
[:cﺔﺒﻳﺮﻀﻟا حﺎﺘﻔﻣ نود ﻦﻣ ﻢﺳﺮﻟا
dءﺎﻋﺪﺘﺳﻻﻲﺣﺎﺘﻔﻣ ﻰﻠﻋ ﻂﻐﻀﻟا ﺪﻨﻋ ﺔﺒﻳﺮﻀﻟا ﻢﺳر[RATE]و[–TAX].
]
TA
X
STORE
+
[:cﺔﺒﻳﺮﻀﻟا حﺎﺘﻔﻣ ﻊﻣ ﻢﺳﺮﻟا
dﻲﺣﺎﺘﻔﻣ ﻰﻠﻋ ﻂﻐﻀﻟا ﺪﻨﻋ ﺔﺒﻳﺮﻀﻟا ﻢﺳر ﻆﻔﺤﻟ[RATE]و[+TAX].
A 0 2 3 F
ﺔﻳﺮﺸﻌﻟا ﺔﻟﺰﻨﻤﻟا ﺪﻳﺪﺤﺗ حﺎﺘﻔﻣ
– F –
– 0 – 2 – 3 –
– A –
ﻤﻟا ﻂﻤﻧﺔﻤﺋﺎﻌﻟا ﺔﻟﺰﻨ
ﺔﺘﺑﺎﺜﻟا ﺔﻟﺰﻨﻤﻟا ﻂﻤﻧ
حﺮﻄﻟاو ﻊﻤﺠﻟا تﺎﺑﺎﺴﺣ ﻲﻓ ﺔﻳﺪﻘﻨﻟا ﺔﻟﺰﻨﻤﻟا لﺎﺧدﺈﺑ ًﺎ ﻴ ﺋ ﺎ ﻘ ﻠ ﺗ ﺔﻓﺎﺿﻹا ﻂﻤﻧ مﻮﻘﻳ
5/4
ﺮﻳوﺪﺘﻟا حﺎﺘﻔﻣ/ﺮﻳوﺪﺘﻟا ءﺎﻬﻧإ/ﻞﻔﺳﻷا ﻰﻟإ ﺮﻳوﺪﺘﻟا
ﻲﻠﻳﺎﻣ ﻲﻨﻌﺗ ضﺮﻌﻟا ﺔﺷﺎﺷ تﺎﻣﻼﻋ:
MEMORY:ةﺮآاﺬﻟاTAX:ﺔﺒﻳﺮﻀﻟا ﻎﻠﺒﻣ
–MINUS:ﺐﻟﺎﺳ)ﺺﻗﺎﻧ وأ(–TAX:ﺔﺒﻳﺮﻀﻟا ءﺎﻨﺜﺘﺳﺎﺑ ﻢﺳﺮﻟا
ERROR:ﺪﺋاز ﻖﻓﺪﺗ ﺄﻄﺧ+TAX:ﻟاﻢﺳﺮﺔﺒﻳﺮﻀﻟا ﻞﻣﺎﺷ
ﺔﺒﻳﺮﻀﻟا ﻢﺳر ﻆﻔﺣ ﻢﺗ : % ﺔﺒﻳﺮﻀﻟا ﻢﺳر داﺪﻋإ :RATE
GT:عﻮﻤﺠﻤﻟاﻲﻟﺎﻤﺟﻹا
تﺎﻴﻠﻤﻌﻟا ﻰﻠﻋ ﺔﻠﺜﻣأ
*
ﺔ
ﻴﺑﺮﻋ ﺔﻐﻟ
.1أبﺎﺴﺤﻟا ﺔﻠﺜﻣ
[ CCE
ON
•]
لﺎﺜﻤﻟا حﺎﺘﻔﻤﻟا ﺔﻴﻠﻤﻋ ضﺮﻌﻟا
2 x 3 = 6 2 [x] 2 [ CCE
ON
•] 3 [=] GT 6.
7 x 9 = 63 7 [÷] [x] 9 [=] GT 63.
300 x 27% = 81 300 [x] 27 [%] GT 81.
56
11.2 x 100% = 20% 11.2 [÷] 56 [%] GT 20.
300+(300 x 40%)=420 300 [+] 40 [%] GT 420.
300–(300 x 40%)=180 300 [–] 40 [%] GT 180.
1400 x 12% = 168 1400 [x] 12 [%] GT 168.
6 + 4 + 7.5 = 17.5 6 [+] 4 [+] 7.5 [=] GT 17.5
5 x 3 ÷ 0.2 = 75 [CCE
ON
•] [ CCE
ON
•] 5 [x] 3 [÷]
0.2 [=] GT 75.
8 ÷ 4 x 3.7 + 9 =16.4 8 [÷] 4 [x] 3.7 [+] 9 [=] GT 16.4
54= 625 5 [x] [=] [=] [=] GT 625.
1 / 2 = 0.5 2 [÷] [=] GT 0.5
10)3x(2
1
+= 0.0625 2 [x] 3 [+] 10 [÷] [=] GT 0.0625
A 0 2 3 F
144 = 12 144 [ ] 12.
A 0 2 3 F
5/4
$14.90+$0.35–$1.45+
$12.05=$25.85
1490 [+] 35 [–] 145
[+] 1205 [=]
GT
145.
25.85
2.ةﺮآاﺬﻟا بﺎﺴﺣ
[R
C
M] [ R
C
M] [ CCE
ON
•]
0.
12 [x] 4 [M+] 20 [÷] 2 [M–] MEMORY 10.
[R
C
M] MEMORY 38.
A 0 2 3 F
5/4
(12 x 4) – (20 ÷2)
= 38
[R
C
M] [ CCE
ON
•] 0.
3.ﺖﺑﺎﺜﻟا بﺎﺴﺣ
2 + 3 = 5 2 [+] 3 [=] GT 5.
4 + 3 = 7 4 [=] GT 7.
3 x 4 = 12 3 [x] 4 [=] GT 12.
A 0 2 3 F
3 x 6 = 18 6 [=] GT 18.
4.ﺣﺪﺘﻟا ﺄﻄﺧ فﺬﺪﺋاﺰﻟا ﻖﻓ(SDC-395N)
12345678901234567 ERROR 1'234'567'890'123'456.
[00→0] 1'234'567'890'123'456.
[x] 10000 [=] ERROR 1’234.567890123456
1234567890123456 x
10000
= 1'234.567890123456 x
1012 [CCE
ON
•] [ CCE
ON
•] 0.
5.ﻞﻔﺳﻷاو ﻰﻠﻋﻷا ﻰﻟإ ﺮﻌﺴﻟا ﻢﻴﻠﻌﺗ بﺎﺴﺣ
2000+(P x 20%)=P
P= 20%-1
2000 =2'500.00
2500–2000 = 500.00
2000 [÷] 20 [MU]
[MU]
2'500.00
500.00
2000–(P x 20%)=P
P= 20%1
2000
+=1'666.67
2000 [÷] 20 [+/–] [MU] 1'666.67
A 0 2 3 F
5/4
15000
15000-18000 x100%
= 20.00%
18000 [–] 15000 [MU] 20.00
6 .ةﺮآاذ عﻮﻤﺠﻤﻟا ﻲﻟﺎﻤﺟﻹا
ﻰﻠﻋ ﻂﻐﺿا[GT]ﻲﻟﺎﻤﺟﻹا عﻮﻤﺠﻤﻟا ﺔﻔﻴﻇو ﻞﻴﻐﺸﺗ ﻞﺒﻗ ﻦﻴﺗﺮﻣ
GT 30.
GT 20.
GT 150.
GT 200.
GT 30.
GT 230.
230.
A 0 2 3 F
20 + 10 = 30
45 – 25 = 20
50 x 3 = 150
total = 200
200 x 15% = 30
200 + (200 x 15%) =
230
[GT] [GT] 20 [+] 10 [=]
45 [–] 25 [=]
50 [x] 3 [=]
[GT]
[x] 15 [%]
[GT]
[GT]
[CCE
ON
•] 0.
آﻊﻴﻤﺠﺗ ﻢﺘﻳﻲﻟﺎﻤﺟﻹا عﻮﻤﺠﻤﻟا ﻲﻓ بﺎﺴﺤﻟا ﺞﺋﺎﺘﻧ ﺔﻓﺎ 7.ﺔﺒﻳﺮﻀﻟا بﺎﺴﺣ %
3 [RATE] [+TAX] 3.
+TAX
100 [+TAX] 103.
TAX
100+TAX(3%)
= 103
ﺔﺒﻳﺮﻀﻟا عﻮﻤﺠﻣ = 3 [+TAX] 3.
ﺔﺒﻳﺮﻀﻟا عﻮﻤﺠﻣ=3ﺔﻤﻴﻘﻟاﺔﻠﻣﺎﺷﺔﺒﻳﺮﻀﻟا=103
%
[CCE
ON
•] [RATE] [–TAX] 3.
–TAX
206 [–TAX] 200.
TAX
206–TAX(3%)
= 200
ﺔﺒﻳﺮﻀﻟا عﻮﻤﺠﻣ = 6 [–TAX] 6.
ﺔﺒﻳﺮﻀﻟا عﻮﻤﺠﻣ=6ﺔﺒﻳﺮﻀﻟا نود ﻦﻣ ﺔﻤﻴﻘﻟا=020

File name: D88A1_A2_Indonesian vision : 10/02/24
* Sumber tenaga listerlk Bahasa Indonesia
Calculator CITIZEN model SDC-384N/SDC-395N mendapat listerik dari
dua macam baterai : tenaga matahari dan tenaga simpanan, sehingga
calculator ini bisa bekerja dibawah segala macam sinar.
-Sumber tenaga bisa bekerja dan tutup secara otomatis-
Jikalau dalam kira2 7 menit calculator tidak bekerja maka sumber tenaga
akan berhenti bekerja otomatis.
-Cara mengganti baterai-
Jikalau baterai perlu diganti, anda harus membuka dulu kotak baterai dan
mengeluarkan baterai lama. Sesudah itu anda baru bisa memasukkan
baterai yang baru didalam kotak itu. Setelah mengganti baterai, silahkan
gunakan obyek metal berbentuk bulat panjang untuk menekan RESET
pada PCB.
-Cara me-reset-
Jika kalkulator terkunci dan Anda tidak dapat mengoperasikan tombol,
tekan bersama-sama bagian tengah pada [MU]&[=] untuk membuka kunci.
Kalkulator akan kembali ke pengaturan default.
*Daftar fungsi tuts Bahasa Indonesia
[
ON
CE C
] : Tombol Power On /Hapus tombol yang dimasukkan / Tombol Hapus
[00→0] : Koreksi [M+] : Memory penambahan
[M–] : Memory pengurangan [+/–] : ±Tombol pengubah tanda
[R
C
M] : Memory / Penghapusan [GT] : Tombol Total Keseluruhan
[ ] : Tombol akar kuadrat [RATE] : Tombol Pengatur Tarif Pajak
[
TAX
STORE
+
] : Harga dengan Tombol Pajak Untuk menyimpan Tarif Pajak
pada waktu menekan tombol [RATE] dan [+TAX]
[
TAX
RECALL
−
] : Harga tanpa Tombol Pajak Untuk mengembalikan Tarif Pajak
pada waktu menekan tombol [RATE] dan [–TAX]
A 0 2 3 F
Switch pemilihan jumlah desimal
– F –
– 0 – 2 – 3 –
– A –
Mode desimal mengambang
Mode desimal tetap
Mode ADD secara otomatis akan memasukkan desimal
keuangan pada operasi perhitungan penambahan dan
pengurangan
5/4
Switch untuk pembulatan ke atas / pembulatan ke bentuk
yang lebih sederhana / pembulatan ke bawah
Arti dari Tanda-tanda yang Muncul di Layar:
MEMORY ： Memori TAX ： Jumlah Pajak
– MINUS ： Minus(atau negatif) –TAX ： Harga tanpa Pajak
ERROR ： Kesalahan Overflow +TAX ： Harga termasuk Pajak
GT ： Total Keseluruhan % ： Tarif Pajak yang tersimpan
RATE ： Pengatur Tarif Pajak
*Contoh cara pakai Bahasa Indonesia
1.Cara kalkulasi biasa
Sebelum melakukan tiap perhitungan, tekan tombol [
C
CE
ON
•] 2 kali.
Contoh Operasi Tombol Tampilan di Layar
2 x 3 = 6 2 [x] 2 [
C
CE
ON
•] 3 [=] GT
6.
7 x 9 = 63 7 [÷] [x] 9 [=] GT 63.
300 x 27% = 81 300 [x] 27 [%] GT 81.
56
11.2 x 100% = 20%
11.2 [÷] 56 [%] GT
20.
300+(300 x 40%)=420 300 [+] 40 [%] GT 420.
300–(300 x 40%)=180 300 [–] 40 [%] GT 180.
1400 x 12% = 168 1400 [x] 12 [%] GT 168.
6 + 4 + 7.5 = 17.5 6 [+] 4 [+] 7.5 [=] GT 17.5
5 x 3 ÷ 0.2 = 75 [
C
CE
ON
•] [
C
CE
ON
•] 5 [x] 3 [÷]
0.2 [=] GT
75.
8 ÷ 4 x 3.7 + 9 =16.4 8 [÷] 4 [x] 3.7 [+] 9 [=] GT 16.4
54= 625 5 [x] [=] [=] [=] GT 625.
1 / 2 = 0.5 2 [÷] [=] GT 0.5
10)3x(2
1
+
= 0.0625
2 [x] 3 [+] 10 [÷] [=] GT 0.0625
A 0 2 3 F
144 = 12 144 [
] 12.
A 0 2 3 F
5/4
$14.90+$0.35–$1.45+
$12.05=$25.85
1490 [+] 35 [–] 145
[+] 1205 [=]
GT
145.
25.85
2.Cara melakukan kalkulasi dengan memory
[R
C
M] [ R
C
M] [
C
CE
ON
•]
0.
12 [x] 4 [M+] 20 [÷] 2 [M–]
MEMORY
10.
[R
C
M] MEMORY
38.
A 0 2 3 F
5/4
(12 x 4) – (20 ÷ 2)
= 38
[R
C
M] [
C
CE
ON
•]
0.
3.Cara kalkulasi dengan bilangan konstan
2 + 3 = 5 2 [+] 3 [=] GT 5.
4 + 3 = 7 4 [=] GT 7.
3 x 4 = 12 3 [x] 4 [=] GT 12.
A 0 2 3 F
3 x 6 = 18 6 [=] GT
18.
4.Pengnapusan kalkulasi yang melewati(SDC-395N)
12345678901234567
ERROR
1'234'567'890'123'456.
[00→0]
1'234'567'890'123'456.
[x] 10000 [=] ERROR
1’234.567890123456
1234567890123456 x
10000
= 1'234.567890123456
x 1012 [
C
CE
ON
•] [
C
CE
ON
•]
0.
5.Perhitungan mark-up & down harga
2000+(P x 20%)=P
P= 20%-1
2000 =2'500.00
2500–2000 = 500.00
2000 [÷] 20 [MU]
[MU]
2'500.00
500.00
2000–(P x 20%)=P
P=
20%1
2000
+
=1'666.67
2000 [÷] 20 [+/–] [MU] 1'666.67
A 0 2 3 F
5/4
15000
15000-18000
x100%
= 20.00%
18000 [–] 15000 [MU] 20.00
6.GT-MEMORI
Tekanlah [GT] dua kali sebelum Anda mengoperasikan fungsi GT .
GT 30.
GT 20.
GT 150.
GT 200.
GT 30.
GT 230.
230.
A 0 2 3 F
20 + 10 = 30
45 – 25 = 20
50 x 3 = 150
total = 200
200 x 15% = 30
200 + (200 x 15%) =
230
[GT] [GT] 20 [+] 10 [=]
45 [–] 25 [=]
50 [x] 3 [=]
[GT]
[x] 15 [%]
[GT]
[GT]
[
C
CE
ON
•]
0.
Semua hasil kalkulasi dikumpulkan secara otomatis dalam GT.
7.Perhitungan Pajak
%
3 [RATE] [+TAX]
3.
+TAX
100 [+TAX]
103.
TAX
100+TAX(3%)
= 103
Jumlah pajak = 3 [+TAX]
3.
3 = Jumlah pajak 103 = Nilai termasuk pajak
%
[
C
CE
ON
•] [RATE] [–TAX]
3.
–TAX
206 [–TAX]
200.
TAX
206–TAX(3%)
= 200
Jumlah pajak = 6 [–TAX]
6.
6 = Jumlah pajak 200 = Nilai di luar pajak

File name: D88A1_A2_Chinese_100419.doc vision : 10/02/24
* 电源 中文
CITIZEN SDC-384N/SDC-395N 是双重电池计算器(太阳能与电池供电)，可
以在任何光线下操作。
-自动关闭电源-
如果在七分钟左右不进行任何操作计算器的电源将会自动关闭。
-电池更换-
如果需要更换电池，打开下盖取出旧电池，将新电池放在电池槽中。更换电
池后，请用一金属、椭圆形物体压按印刷电路板上的 RESET 板。
-重置操作-
如果计算器锁机且无法进一步操作按键，请同时按下[MU]&[=]按鍵的中
央來解决这个情况。所有设置将返回默认设置。
*按键索引 中文
[CCE
ON
•] : 开机/清除输入/全部清除
[00→0] : 末位删除键
[M+] : 加法记忆键
[M–] : 减法记忆键
[+ / –] : 正负号改变键
[R
C
M] : 显示记忆内容键/清除记忆内容键
[MU] : 标价/降价
[GT] : 总计键
[] : 平方根键
[RATE] : 税收率设定键
[TA
X
STORE
+] : c含税的价格键 d当按 [RATE] 和[+TAX] 键时储存税收率
[TA
X
RECALL
−] : c无税的价格键 d当按 [RATE] 和[–TAX] 键时检索税收率
A 0 2 3 F
小数位设定开关
– F –
– 0 – 2 – 3 –
– A –
浮点小数模式
固定小数位模式
加位模式 自动在加法与减法计算中加入货币小数点
5/4
无条件进入 / 四舍五入 / 无条件舍去 开关
显示屏各标志之意义:
MEMORY：储存器 TAX：税收的量
–MINUS：负号 –TAX：不含税的价格
ERROR：溢位/错误 +TAX：含税的价格
GT：总计 RATE：税收率设定
%：储存的税收率
*操作范例 中文
1.一般计算操作
执行任一计算前，请先按 2次[CCE
ON
•]键。
范例 按键操作 显示
2 x 3 = 6 2 [x] 2 [ CCE
ON
•] 3 [=] GT 6.
7 x 9 = 63 7 [÷] [x] 9 [=] GT 63.
300 x 27% = 81 300 [x] 27 [%] GT 81.
56
11.2 x 100% = 20% 11.2 [÷] 56 [%] GT 20.
300+(300 x 40%)=420 300 [+] 40 [%] GT 420.
300–(300 x 40%)=180 300 [–] 40 [%] GT 180.
1400 x 12% = 168 1400 [x] 12 [%] GT 168.
6 + 4 + 7.5 = 17.5 6 [+] 4 [+] 7.5 [=] GT 17.5
5 x 3 ÷ 0.2 = 75 [CCE
ON
•] [ CCE
ON
•] 5 [x] 3 [÷]
0.2 [=] GT 75.
8 ÷ 4 x 3.7 + 9 =16.4 8 [÷] 4 [x] 3.7 [+] 9 [=] GT 16.4
54= 625 5 [x] [=] [=] [=] GT 625.
1 / 2 = 0.5 2 [÷] [=] GT 0.5
10)3x(2
1
+= 0.0625 2 [x] 3 [+] 10 [÷] [=] GT 0.0625
A 0 2 3 F
144 = 12 144 [ ] 12.
A 0 2 3 F
5/4
$14.90+$0.35–$1.45+
$12.05=$25.85
1490 [+] 35 [–] 145
[+] 1205 [=]
GT
145.
25.85
2.记忆计算的操作
[R
C
M] [ R
C
M] [ CCE
ON
•] 0.
12 [x] 4 [M+] 20 [÷] 2 [M–] MEMORY 10.
[R
C
M] MEMORY 38.
A 0 2 3 F
5/4
(12 x 4) – (20 ÷ 2)
= 38
[R
C
M] [ CCE
ON
•] 0.
3.常数计算
2 + 3 = 5 2 [+] 3 [=] GT 5.
4 + 3 = 7 4 [=] GT 7.
3 x 4 = 12 3 [x] 4 [=] GT 12.
A 0 2 3 F
3 x 6 = 18 6 [=] GT 18.
4.超出运算容量的消除(SDC-395N)
12345678901234567 ERROR 1'234'567'890'123'456.
[00→0] 1'234'567'890'123'456.
[x] 10000 [=] ERROR 1’234.567890123456
1234567890123456 x
10000
= 1'234.567890123456
x 1012 [CCE
ON
•] [ CCE
ON
•]0.
5.标价&降价计算
2000+(P x 20%)=P
P= 20%-1
2000 =2'500.00
2500–2000 = 500.00
2000 [÷] 20 [MU]
[MU]
2'500.00
500.00
2000–(P x 20%)=P
P= 20%1
2000
+=1'666.67
2000 [÷] 20 [+/–] [MU] 1'666.67
A 0 2 3 F
5/4
15000
15000-18000 x100%
= 20.00%
18000 [–] 15000 [MU] 20.00
6.总计储存器
在你操作总计功能前，按[GT] 二次。
GT 30.
GT 20.
GT 150.
GT 200.
GT 30.
GT 230.
230.
A 0 2 3 F
20 + 10 = 30
45 – 25 = 20
50 x 3 = 150
total = 200
200 x 15% = 30
200 + (200 x 15%) =
230
[GT] [GT] 20 [+] 10 [=]
45 [–] 25 [=]
50 [x] 3 [=]
[GT]
[x] 15 [%]
[GT]
[GT]
[CCE
ON
•] 0.
所有的计算结果都被累积在总计中
7.税率计算
%
3 [RATE] [+TAX] 3.
+TAX
100 [+TAX] 103.
TAX
100+TAX(3%)
= 103
税值= 3 [+TAX] 3.
3 =税值 103 =含税值
%
[CCE
ON
•] [RATE] [–TAX] 3.
–TAX
206 [–TAX] 200.
TAX
206–TAX(3%)
= 200
税值= 6 [–TAX] 6.
6 =税值 200 =不含税值

File name: D88A1_A2_Greek version : 10/02/24
* ΤΡΟΦΟ∆ΟΣΙΑ Ελληνικά
Το CITIZEN SDC-384N/ SDC-395N είναι µια αριθµοµηχανή µε διπλή τροφοδοσία
(ηλιακή ενέργεια υψηλής ισχύος + εφεδρική µπαταρία), ηοποία λειτουργεί κάτω
από οποιεσδήποτε συνθήκες φωτισµού.
- Λειτουργία αυτόµατου κλεισίµατος -
Ηαριθµοµηχανή κλείνει αυτόµατα εάν δεν έχει υπάρξει καµία πληκτρολόγηση για 7
περίπου λεπτά.
-Αλλαγή µπαταρίας-
άν χρειαστεί να αλλαχτεί ηεφεδρική µπαταρία, ανοίξτε το κάτω περίβληµα για να
αφαιρέσετε την παλαιά µπαταρία και να εισάγετε µια νέα µπαταρία µε την
υποδεικνυόµενη πολικότητα. Μετά από την αλλαγή µπαταρίας, χρησιµοποιήστε
ένα µεταλλικό, ελλειπτικό αντικείµενο για να πιέσετε το RESET στην πλακέτα
τυπωµένου κυκλώµατος.
-Λειτουργία επαναφοράς-
άν ηαριθµοµηχανή είναι κλειδωµένη και δεν επιτρέπει την περαιτέρω λειτουργία
των πλήκτρων, για να αντιµετωπίσετε το πρόβληµα πιέστε ταυτόχρονα το κέντρο
στο [MU]&[=]. Όλες οι ρυθµίσεις θα επανέλθουν στη ρύθµιση προεπιλογής.
*ΕΥΡΕΤΗΡΙΟ ΠΛΗΚΤΡ Ν Ελληνικά
[
ON
CE C
] : Πλήκτρο ανοίγµατος / διαγραφής πληκτρολόγησης /διαγραφής
[00→0] : Πλήκτρο δεξιάς µετατόπισης [M+] : Πλήκτρο µνήµης συν
[M–] : Πλήκτρο µνήµης πλην [+/–] : Πλήκτρο αλλαγής προσήµου ±
[R
C
M] : Πλήκτρο ανάκλησης µνήµης/Πλήκτρο διαγραφής µνήµης
[MU] : Πλήκτρο αύξησης/µείωσης τιµής [GT] : Πλήκτρο γενικού συνόλου
[ ] : Πλήκτρο τετραγωνικής ρίζας
[RATE] : Πλήκτρο ρύθµισης συντελεστή φόρου
[
S TO R E
+ TA X
] : Πλήκτρο τιµής µε φόρο.
Αποθήκευση συντελεστή φόρου όταν πιέζονται τα πλήκτρα [RATE] και [+TAX]
[
RECALL
-TAX
] : Πλήκτρο τιµής χωρίς φόρο.
Ανάκληση συντελεστή φόρου όταν πιέζονται τα πλήκτρα [RATE] και [-TAX]
A 0 2 3 F
∆ιακόπτης επιλογής θέσης υποδιαστολής
– F –
– 0 – 2 – 3 –
– A –
Λειτουργία µεταβλητού αριθµού δεκαδικών
Λειτουργία σταθερού αριθµού δεκαδικών
Ηλειτουργία προσθήκης εισάγει αυτόµατα το νοµισµατικό
δεκαδικό στις πράξεις πρόσθεσης και αφαίρεσης
5/4
∆ιακόπτης στρογγυλοποίησης προς τα επάνω /
στρογγυλοποίησης / στρογγυλοποίησης προς τα κάτω
Οι ενδείξεις της οθόνης σηµαίνουν τα εξής:
M : µνήµη TAX : Ποσό φόρου
– : Πλην (ήαρνητικό) –TAX : Τιµή χωρίς φόρο
E : Σφάλµα υπερχείλισης +TAX : Τιµή µε φόρο
GT : Γενικό σύνολο RATE : Ρύθµιση συντελεστή φόρου
% : Αποθηκευµένος συντελεστής φόρου
*ΠΑΡΑ∆ΕΙΓΜΑΤΑ ΛΕΙΤΟΥΡΓΙΑΣ Ελληνικά
1.Παραδείγµατα υπολογισµών
Πριν πραγµατοποιήσετε κάθε υπολογισµό, πατήστε 2 φορές το πλήκτρο [
ON
CE C
].
Example Key operation Display
2 x 3 = 6 2 [x] 2 [
C
CE
ON
•] 3 [=] GT
6.
7 x 9 = 63 7 [÷] [x] 9 [=] GT 63.
300 x 27% = 81 300 [x] 27 [%] GT 81.
56
11.2 x 100% = 20% 11.2 [÷] 56 [%] GT
20.
300+(300 x 40%)=420 300 [+] 40 [%] GT 420.
300–(300 x 40%)=180 300 [–] 40 [%] GT 180.
1400 x 12% = 168 1400 [x] 12 [%] GT 168.
6 + 4 + 7.5 = 17.5 6 [+] 4 [+] 7.5 [=] GT 17.5
5 x 3 ÷ 0.2 = 75 [
C
CE
ON
•] [
C
CE
ON
•] 5 [x] 3 [÷]
0.2 [=] GT
75.
8 ÷ 4 x 3.7 + 9 =16.4 8 [÷] 4 [x] 3.7 [+] 9 [=] GT 16.4
54= 625 5 [x] [=] [=] [=] GT 625.
1 / 2 = 0.5 2 [÷] [=] GT 0.5
10)3x(2
1
+
= 0.0625 2 [x] 3 [+] 10 [÷] [=] GT
0.0625
A 0 2 3 F
144 = 12 144 [
] 12.
A 0 2 3 F
5/4
$14.90+$0.35–$1.45+
$12.05=$25.85
1490 [+] 35 [–] 145
[+] 1205 [=]
GT
145.
25.85
2. Yπολογισµός µνήµης
[R
C
M] [ R
C
M] [
C
CE
ON
•]
0.
12 [x] 4 [M+] 20 [÷] 2 [M–] MEMORY 10.
[R
C
M] MEMORY
38.
A 0 2 3 F
5/4
(12 x 4) – (20 ÷ 2)
= 38
[R
C
M] [
C
CE
ON
•]
0.
3. Yπολογισµός σταθεράς
2 + 3 = 5 2 [+] 3 [=] GT 5.
4 + 3 = 7 4 [=] GT 7.
3 x 4 = 12 3 [x] 4 [=] GT 12.
A 0 2 3 F
3 x 6 = 18 6 [=] GT
18.
4. ∆ιαγραφή σφάλµατος υπερχείλισης(SDC-395N)
12345678901234567
ERROR 1'234'567'890'123'456.
[00→0]
1'234'567'890'123'456.
[x] 10000 [=] ERROR 1’234.567890123456
1234567890123456 x
10000
= 1'234.567890123456 x
1012 [
C
CE
ON
•] [
C
CE
ON
•]
0.
5. Υπολογισµος αυξησης & Μειωσης τιµης
2000+(P x 20%)=P
P= 20%-1
2000 =2'500.00
2500–2000 = 500.00
2000 [÷] 20 [MU]
[MU]
2'500.00
500.00
2000–(P x 20%)=P
P=
20%1
2000
+
=1'666.67
2000 [÷] 20 [+/–] [MU] 1'666.67
A 0 2 3 F
5/4
15000
15000-18000 x100%
= 20.00%
18000 [–] 15000 [MU] 20.00
6.Μνήµη GT
Πιέζοντας δύο φορές [GT] πριν να χρησιµοποιήσετε τη λειτουργία GT.
GT 30.
GT 20.
GT 150.
GT 200.
GT 30.
GT 230.
230.
A 0 2 3 F
20 + 10 = 30
45 – 25 = 20
50 x 3 = 150
total = 200
200 x 15% = 30
200 + (200 x 15%) =
230
[GT] [GT] 20 [+] 10 [=]
45 [–] 25 [=]
50 [x] 3 [=]
[GT]
[x] 15 [%]
[GT]
[GT]
[
C
CE
ON
•]
0.
Όλα τα αποτελέσµατα υπολογισµού συσσωρεύονται αυτόµατα στη GT.
7. Yπολογισµός φόρου
%
3 [RATE] [+TAX]
3.
+TAX
100 [+TAX]
103.
TAX
100+TAX(3%)
= 103
Tax sum = 3 [+TAX]
3.
3 = Tax sum 103 = Tax inclusive value
%
[
C
CE
ON
•] [RATE] [–TAX]
3.
–TAX
206 [–TAX]
200.
TAX
206–TAX(3%)
= 200
Tax sum = 6 [–TAX]
6.
6 = Tax sum 200 = Tax exclusive value

WEEE MARK
En If youwant to dispose thisproduct, do notmixwith generalhousehold
waste. There is a separate collection systems for usedelectronicsproducts
in accordancewith legislationunder the WEEEDirective(Directive
2002/96/EC) and is effectiveonlywithin EuropeanUnion.
Ge Wenn Sie dieses Produkt entsorgenwollen,dann tun Sie diesbittenicht
zusammenmit dem Haushaltsmüll. Es gibt im RahmenderWEEE--
Direktiveinnerhalbder EuropäischenUnion (Direktive 2002/96/EC)
gesetzliche Bestimmungen für separate Sammelsysteme für gebrauchte
elektronische Geräte und Produkte.
Sp Si desea deshacerse de esteproducto, no lo mezcle con residuos
domésticos de carácter general. Existe un sistema de recogidaselectiva
de aparatos electrónicosusados,según establece la legislaciónprevista
por la Directiva2002/96/CE sobreresiduos de aparatos eléctricos y
electrónicos(RAEE), vigente únicamente en la Unión Europea.
It Se desiderate gettareviaquesto prodotto, nonmescolatelo ai rifiuti
generici di casa.Esiste un sistema di raccolta separato per i prodotti
elettronici usati in conformità allalegislazione RAEE(Direttiva
2002/96/CE), validasoloall’internodell’Unione Europea.
Du Deponeerditproduct nietbijhetgewonehuishoudelijk afvalwanneer u het
wiltverwijderen. Erbestaatingevolge de WEEE-richtlijn(Richtlijn
2002/96/EG)eenspeciaalwettelijk voorgeschreven verzamelsysteem
voorgebruikte elektronischeproducten,welkalleengeldt binnen de
EuropeseUnie.
JM74932-00F
Da Hvis du vil skille dig af med dette produkt, må du ikke smide det ud sammen
med dit almindelige husholdningsaffald. Der findes et separat indsamlingssys-
tem for udtjente elektroniske produkter i overensstemmelsemed
lovgivningenunderWEEE-direktivet(direktiv 2002/96/EC), som kun er
gældende i den EuropæiskeUnion.
Por Se quiserdeitar fora esteproduto, nãoomisturecomolixo comum. De acordo
com a legislação quedecorre da Directiva REEE – Resíduos de Equipamen-
tos EléctricoseElectrónicos(2002/96/CE), existe um sistema de recolha
separadopara os equipamentos electrónicos fora de uso, em vigorapenas
na União Europeia.
Pol
Fr Si voussouhaitez vousdébarrasser de cet appareil, ne le mettez pas à la
poubelleavec vos orduresménagères. Il existe un système de
récupérationdistinctpourlesvieux appareils électroniquesconformé-
ment à la législationWEEEsur le recyclagedesdéchets des
équipements électriques et électroniques(Directive2002/96/EC) quiest
uniquementvalable dansles pays de l’Unioneuropéenne.
Les appareils et les machinesélectriques et électroniques contiennent
souventdesmatières dangereuses pourl’homme et l’environnement si vous
les utilisez et vousvous en débarrassez de façoninappropriée.
Information for Users on Collection and Disposal of used Batteries.
The symbol in this information sheet means that used batteries
should not be mixed with general household waste.
For proper treatment, recovery and recycling of used batteries,
please take them to applicable collection points.
For more information about collection and recycling of batteries,
please contact your local municipality,your waste disposal service
or the point of sale where you purchased the items.
Information on Disposal in other Countries outside the European Union.
This symbol is only valid in the European Union.
If you wish to discard used batteries, please contact your local authorities
or dealer and ask for the correct method of disposal.