Citizen CT-S2000 User manual

LINE THERMAL PRINTER
MODEL
CT-S2000/CT-S2000DC
CT-S2000L/CT-S2000DCL
User’s Manual

WEEE MARK
,I\RXZDQWWRGLVSRVHWKLVSURGXFWGRQRWPL[ZLWKJHQHUDOKRXVHKROGZDVWH7KHUHLVD
VHSDUDWHFROOHFWLRQV\VWHPVIRUXVHGHOHFWURQLFVSURGXFWVLQDFFRUGDQFHZLWKOHJLVODWLRQXQGHU
WKH:((('LUHFWLYH'LUHFWLYH(&DQGLVHIIHFWLYHRQO\ZLWKLQ(XURSHDQ8QLRQ
:HQQ6LHGLHVHV3URGXNWHQWVRUJHQZROOHQGDQQWXQ6LHGLHVELWWHQLFKW]XVDPPHQPLWGHP
+DXVKDOWVPOO(VJLEWLP5DKPHQGHU:((('LUHNWLYHLQQHUKDOEGHU(XURSlLVFKHQ8QLRQ
'LUHNWLYH(&JHVHW]OLFKH%HVWLPPXQJHQIUVHSDUDWH6DPPHOV\VWHPHIUJHEUDXFKWH
HOHNWURQLVFKH*HUlWHXQG3URGXNWH
6LYRXVVRXKDLWH]YRXVGpEDUUDVVHUGHFHWDSSDUHLOQHOHPHWWH]SDVjODSRXEHOOHDYHFYRV
RUGXUHVPpQDJqUHV,OH[LVWHXQV\VWqPHGHUpFXSpUDWLRQGLVWLQFWSRXUOHVYLHX[DSSDUHLOV
pOHFWURQLTXHVFRQIRUPpPHQWjODOpJLVODWLRQ:(((VXUOHUHF\FODJHGHVGpFKHWVGHV
pTXLSHPHQWVpOHFWULTXHVHWpOHFWURQLTXHV'LUHFWLYH(&TXLHVWXQLTXHPHQWYDODEOH
GDQVOHVSD\VGHO¶8QLRQHXURSpHQQH
/HVDSSDUHLOVHWOHVPDFKLQHVpOHFWULTXHVHWpOHFWURQLTXHVFRQWLHQQHQWVRXYHQWGHVPDWLqUHV
GDQJHUHXVHVSRXUO¶KRPPHHWO¶HQYLURQQHPHQWVLYRXVOHVXWLOLVH]HWYRXVYRXVHQGpEDUUDVVH]
GHIDoRQLQDSSURSULpH
6LGHVHDGHVKDFHUVHGHHVWHSURGXFWRQRORPH]FOHFRQUHVLGXRVGRPpVWLFRVGHFDUiFWHU
JHQHUDO([LVWHXQVLVWHPDGHUHFRJLGDVHOHFWLYDGHDSDUDWRVHOHFWUyQLFRVXVDGRVVHJ~Q
HVWDEOHFHODOHJLVODFLyQSUHYLVWDSRUOD'LUHFWLYD&(VREUHUHVLGXRVGHDSDUDWRV
HOpFWULFRV\HOHFWUyQLFRV5$((YLJHQWH~QLFDPHQWHHQOD8QLyQ(XURSHD
6HGHVLGHUDWHJHWWDUHYLDTXHVWRSURGRWWRQRQPHVFRODWHORDLULILXWLJHQHULFLGLFDVD(VLVWH
XQVLVWHPDGLUDFFROWDVHSDUDWRSHULSURGRWWLHOHWWURQLFLXVDWLLQFRQIRUPLWjDOODOHJLVOD]LRQH
5$(('LUHWWLYD&(YDOLGDVRORDOO¶LQWHUQRGHOO¶8QLRQH(XURSHD
'HSRQHHUGLWSURGXFWQLHWELMKHWJHZRQHKXLVKRXGHOLMNDIYDOZDQQHHUXKHWZLOWYHUZLMGHUHQ(U
EHVWDDWLQJHYROJHGH:(((ULFKWOLMQ5LFKWOLMQ(*HHQ VSHFLDDO ZHWWHOLMN
YRRUJHVFKUHYHQYHU]DPHOV\VWHHPYRRUJHEUXLNWHHOHNWURQLVFKHSURGXFWHQZHONDOOHHQJHOGW
ELQQHQGH(XURSHVH8QLH
+YLVGXYLOVNLOOHGLJDIPHGGHWWHSURGXNWPnGXLNNHVPLGHGHWXGVDPPHQPHGGLWDOPLQGHOLJH
KXVKROGQLQJVDIIDOG'HUILQGHVHWVHSDUDWLQGVDPOLQJVV\VWHPIRUXGWMHQWHHOHNWURQLVNHSURGXNWHU
LRYHUHQVVWHPPHOVHPHGORYJLYQLQJHQXQGHU:(((GLUHNWLYHWGLUHNWLY(&VRP
NXQHUJOGHQGHLGHQ(XURSLVNH8QLRQ
6HTXLVHUGHLWDUIRUDHVWHSURGXWRQmRRPLVWXUHFRPROL[RFRPXP'HDFRUGRFRPDOHJLVODomR
TXHGHFRUUHGD'LUHFWLYD5(((±5HVtGXRVGH(TXLSDPHQWRV(OpFWULFRVH(OHFWUyQLFRV
&(H[LVWHXPVLVWHPDGHUHFROKDVHSDUDGRSDUDRVHTXLSDPHQWRVHOHFWUyQLFRVIRUDGH
XVRHPYLJRUDSHQDVQD8QLmR(XURSHLD
-HĪHOL]DPLHU]DV]SR]E\üVLĊWHJRSURGXNWXQLHZ\U]XFDMJRUD]HP]H]Z\Ná\PL
GRPRZ\PLRGSDGNDPL:HGáXJG\UHNW\Z\:((('\UHNW\ZD(&
RERZLą]XMąFHMZ8QLL(XURSHMVNLHMGODXĪ\ZDQ\FKSURGXNWyZHOHNWURQLF]Q\FK
QDOHĪ\VWRVRZDüRGG]LHOQHVSRVRE\XW\OL]DFML
En
Ge
Fr
Sp
It
Du
Da
Por
Pol

IMPORTANT: This equipment generates, uses, and can radiate radio frequency energy
and if not installed and used in accordance with the instruction manual, may cause
interference to radio communications. It has been tested and found to comply with
the limits for a Class A computing device pursuant to Subpart J of Part 15 of FCC
Rules, which are designed to provide reasonable protection against such interference
when operated in a commercial environment. Operation of this equipment in a
residential area is likely to cause interference, in which case the user at his own
expense will be required to take whatever measures may be necessary to correct
the interference.
CAUTION: Use shielded cable for this equipment.
Sicherheitshinweis
Die Steckdose zum Anschluß dieses Druckers muß nahe dem Gerät angebracht und
leicht zugänglich sein.
For Uses in Canada
This Class A digital apparatus complies with Canadian ICES-003.
This digital apparatus does not exceed the class A limits for radio noise emissions
from digital apparatus, as set out in the radio interference regulations of the Canadian
department of communications.
Pour L’utilisateurs Canadiens
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
Cet appareil numérique ne dépasse pas les limites de carégorie a pour les émissions
de bruit radio émanant d’appareils numériques, tel que prévu dans les réglements
sur l’interférence radio du départment Canadien des communications.
This printer conforms to the following Standards:
The Low Voltage Directive 2006/95/EC, formerly 72/23/EEC,
the EMC Directive 2004/108/EC, formerly 89/336/EEC, the RoHS
Directive 2002/95/EC, and the WEEE Directive 2002/96/EC.
LVD:EN60950-1
EMC : EN55022 Class A
EN61000-3-2
EN61000-3-3
EN55024
This declaration is applied only for 230V model.
Declaration of Conformity

— 1 —
GENERAL PRECAUTIONS
●Before using this product, be sure to read through this manual. After having read
this manual, keep it in a safe, readily accessible place for future reference.
●The information contained herein is subject to change without prior notice.
●Reproduction or transfer of part or all of this document in any means is prohibited
without permission from Citizen Systems.
●Note that Citizen Systems is not responsible for any operation results regardless
of missing, error, or misprinting in this manual.
●Note that Citizen Systems is not responsible for any trouble caused as a result of
using options or consumables that are not specified in this manual.
●Except explained elsewhere in this manual, do not attempt to service, disassemble,
or repair this product.
●Note that Citizen Systems is not responsible for any damage attributable to
incorrect operation/handling or improper operating environments that are not
specified in this manual.
●Data is basically for temporary use and not stored for an extended period of time
or permanently. Please note that Citizen Systems is not responsible for damage
or lost profit resulting from the loss of data caused by accidents, repairs, tests or
other occurrence.
●If you find loss of information, error, or uncertain matter, please contact your
Citizen Systems dealer.
●If you find any disordered or missing page(s), contact your Citizen Systems dealer
for replacement.
CITIZEN is a registered trade mark of Citizen Holdings Co., Japan
CITIZEN es una marca registrada de Citizen Holdings Co., Japón
Company names and product names in this manual are trademarks or
registered trademarks of relevant companies.
Copyright c 2008 by CITIZEN SYSTEMS JAPAN CO., LTD.

— 2 —
SAFETY PRECAUTIONS ... WHICH SHOULD BE STRICTLY OBSERVED
Before using this product for the first time, carefully read these SAFETY PRECAUTIONS.
Improper handling may result in accidents (fire, electric shock or injury).
In order to prevent injury to operators, third parties, or damage to property, special
warning symbols are used in the User’s Manual to indicate important items to be strictly
observed.
●After having read this Manual, keep it in a safe, readily accessible place for future
reference.
●Some of the descriptions contained in this manual may not be relevant to some printer
models.
The following describes the degree of hazard and damage that could occur if the printer
is improperly operated by ignoring the instructions indicated by the warning symbols.
This symbol is used to alert your attention to important items.
WARNING
Neglecting precautions indicated by this symbol may result in injury or damage to
properties.
CAUTION
This symbol is used to alert you to the danger of electric shock or electrostatic
damage.
This symbol denotes a request to unplug the printer from the wall outlet.
This symbol is used to indicate useful information, such as procedures, instructions
or the like.
This symbol is used to indicate prohibited actions.
Neglecting precautions indicated by this symbol may result in fatal or serious injury.

— 3 —
■Do not use or store this product in a place where it will be exposed
to:
* Flames or moist air.
* Direct sunlight.
* Hot airflow or radiation from a heating device.
* Salty air or corrosive gases.
* Ill-ventilated atmosphere.
* Chemical reactions in a laboratory.
* Airborne oil, steel particles, or dust.
* Static electricity or strong magnetic field.
•Neglecting these warnings may result in printer failure, overheating,
emission of smoke, fire, or electric shock.
PRECAUTIONS ON PRINTER INSTALLATION
■Do not drop any foreign object nor spill liquid into the printer. Do not
place any object on the printer either.
■Do not drop any metallic object such as paper clip, pin or screw into
the printer.
■Do not place a flower vase, pot or cup containing water on the printer.
■Do not spill coffee, soft drinks or any other liquid into the printer.
■Do not spray insecticide or any other chemical liquid over the printer.
•Ametallic foreign object, if accidentally dropped into the printer, may
cause printer failure, fire, or electric shock. Should it occur,
immediately turn the printer off, unplug it from the supply outlet,
and call your local Citizen Systems dealer.
Do not handle the printer in the following ways:
■Do not allow the printer to sustain strong impacts or hard jolts (e.g.,
trampling, dropping, striking with a hard edge).
■Never attempt to disassemble or modify the printer.
•Neglecting to handle properly may result in printer failure,
overheating, emission of smoke, fire, or electric shock.
WARNING
■Install, use, or store the printer out of the reach of children.
•Electric appliances could cause an unexpected injury or accident if
they are handled or used improperly.
•Keep the power cord and signal cables out of the reach of children.
Also children should not be allowed to gain access to any internal
part of the printer.
•The plastic bag the printer came in must be disposed of properly or
kept away from children. Wearing it over the head may lead to
suffocation.

— 4 —
Do not use the printer under the following conditions.
■A state subject to vibration or unstable state.
■A state with this product slanted.
• Otherwise dropping may cause injury.
• Poor print quality may occur.
■A state where the printer ventilation holes are obstructed by a nearby
wall or other equipment.
■A state where any object is placed on the printer
■A state where the printer is covered or wrapped by a cloth or bed
clothing
•Be careful about internal heat buildup, which could cause fire and
deform the case.
■Avoid using the printer near a radio or TV set or from supplying it
from the same outlet as these appliances.
■Avoid using the printer interconnected with a cable or cord that has
no protection against noise. (For interconnections, use shielded or a
twisted pair of cables and ferrite cores, or other anti-noise devices.)
■Avoid using the printer with a device that is a strong source of noise.
•The printer may have an adverse effect on nearby radio or TV
transmissions. There may also be cases when nearby electrical
appliances adversely influence the printer, causing data errors or
malfunction.
■A state where this product is installed vertically or sidelong.
•Malfunction, failure, or electric shock may result.
CAUTION
■Use the printer with its grounding post connected to a convenient
grounding facility.
•If leakage occurs electric shock may result.
■Do not connect the printer’s grounding post onto any of the following
facilities:
* Utility gas piping
• A gas explosion could result.
* Telephone line ground
* Lightning rod
• If lightning strikes a large surge of current may cause fire or
shock.
* Utility water pipes
• Plastic water pipes should not be used for grounding. (Those
approved by a Waterworks Department may be used.)
■Before connecting or disconnecting the grounding lead to or from
the printer, always unplug it from supply outlet.

— 5 —
PRECAUTIONS IN HANDLING THE PRINTER
Please observe the following precautions for power source and power
cord:
■Do not plug or unplug the power cord with a wet hand.
■Use the printer only at the specified supply voltage and frequency.
■Use only the specified AC adapter with the printer.
■Check to make sure that the supply outlet from which the printer is
powered has a sufficient capacity.
■Do not supply the printer from a power strip or current tap shared
with other appliances.
■Do not plug the power cord into a supply outlet with dust or debris
left on its plug.
■Do not use a deformed or damaged power cord.
■Do not move the printer while the printer power is on.
•Neglecting to handle properly may result in printer failure, emission
of smoke, fire, or electric shock.
•An overload may cause the power cord to overheat or fire or the circuit
breaker to trip.
■Do not allow anything to rest on the power cord. Do not place the
printer where the power cord will be trampled on.
■Do not use or carry the printer with its power cord bent, twisted, or
pulled.
■Do not attempt to modify the power cord unnecessarily.
■Do not lay the power cord in the neighbor of a heating device.
•Neglecting these cautions may cause wires or insulation to break,
which could result in leakage, electric shock, or printer failure. If the
power cord sustains damage, contact your Citizen Systems dealer.
■Do not leave things around the supply outlet.
■Supply power to the printer from a convenient wall outlet, readily
accessible in an emergency.
•The printer may not be immediately shut down in an emergency.
■Insert the power plug fully into the outlet.
■If the printer will not be used for a long time, leave it disconnected
from its supply outlet.
■Hold the plug and connector when plugging or unplugging the power
cord or signal cable after turning off the printer and the appliance
connected to it.
WARNING

— 6 —
Caution label is attached on the position shown in the following figure. Carefully
read the precautions in handling before using the printer.
THIS LABEL INDICATES THE
RISK OF ANY INJURY DUE TO
“HIGHTEMPERATURE” OFTHE
PRINT HEAD.
To prevent possible malfunction or failure observe the following.
■Avoid operating the printer without paper properly loaded.
■Avoid the use of paper not complying with specifications.
•May result in poor print quality.
■Avoid using torn pieces of paper or spliced with plastic adhesive
tapes.
■Avoid forcibly pulling already loaded paper by hand.
■Avoid wedging the paper into the printer.
•May jam paper. To release, refer to “Removing Jammed Paper” in
this manual.
■Avoid using a sharp pointed device to operate panel keys.
■Be sure to firmly insert the cable plug into its mating socket.
•Across connection may damage the printer’s internal electronics or
the host system’s hardware.
■Only use the printer with devices that have designated solenoid
specifications for the cash drawer interface connector.
•Neglecting this caution may result in malfunction or failure.
CAUTION
■Do not transport this printer with the paper roll inside.
•Printer failure or breakage may occur.

— 7 —
Observe the following precautions for daily maintenance.
■When cleaning the printer, always turn it off and unplug it from the
supply outlet.
■Use a soft, dry cloth for cleaning the surface of the printer case.
■For severe stains, use a soft cloth slightly dampened with water.
■Never use organic cleaning solvent such as alcohol, paint thinner,
trichloroethylene, benzene, or ketone. Never use a chemically
processed cleaning cloth.
■To remove paper dust, use a soft brush.
CAUTION
•The thermal head is at a dangerously high temperature immediately
after printing. Allow it to cool off before launching maintenance work.
DAILY MAINTENANCE
To prevent injury and printer failures from worsening, observe the
following:
■Do not touch the printing surface of the thermal head.
■Do not touch any of the moving parts (e.g., paper cutter, gears, active
electrical parts) while the printer is working.
■In case of trouble do not attempt to repair the printer. Ask Citizen
Systems service for repair.
■Be careful that the printer cover does not entrap your hands or fingers.
■Be careful with sharp edges on the printer. Do not allow them to
injure you or damage property.
•May result in electric shock, burn, or injury.
CAUTION
If the printer emits smoke, an odd smell, or unusual noise while printing,
immediately abort the current print session and unplug the printer from
the supply outlet.

— 8 —
THE TABLE OF CONTENTS
1. GENERAL OUTLINE .................................................................... 9
1.1 Features ..........................................................................................9
1.2 Unpacking .....................................................................................10
1.3 Model Classification .....................................................................10
1.4 Basic Specifications .....................................................................11
2. EXPLANATION OF PRINTER PARTS........................................12
2.1 Printer Appearance ......................................................................12
2.2 Printer Cover Inside .....................................................................14
2.3 Other Built-in Functions ...............................................................14
3. PREPARATION ...........................................................................15
3.1 Connecting the AC Power Cord ..................................................15
3.2 Connecting Interface Cables .......................................................16
3.3 Connecting the Cash Drawer ......................................................17
3.4 Precautions in Installing the Printer ...........................................18
3.5 Partition for Paper Roll ................................................................18
3.6 Setting DIP Switch .......................................................................19
3.7 Adjusting the Paper Near-end Sensor ........................................20
4. MAINTENANCE AND TROUBLESHOOTING ........................... 21
4.1 Setting/Replacing the Paper Roll ................................................21
4.2 Removing Jammed Paper ...........................................................21
4.3 Cleaning the Print Head ...............................................................22
4.4 Self-printing ..................................................................................23
4.5 Hexadecimal Dump Printing .......................................................23
4.6 Error Indication .............................................................................24
5. OTHER ....................................................................................... 24
5.1 External Views and Dimensions .................................................24
5.2 Printing Paper ...............................................................................25
5.3 Manual Setting of Memory Switch.............................................26
5.4 Selecting Paper Type ...................................................................29
5.5 Adjusting the Sensitivity of Paper Sensor .................................29
5.6 Printing Paper ...............................................................................31

— 9 —
1. GENERAL OUTLINE
The CT-S2000/CT-S2000DC are thermal line printers designed for use with a
broad array of terminal equipment including data, POS, and kitchen terminals.
With extensive features, they can be used in a wide range of applications.
1.1 Features
●Compact, easy-to-use universal design.
●Drop-in Paper Roll mechanism facilitating easy paper handling and head
cleaning.
●Drip-proof design
●High speed (220 mm/s) printing.
●Versatile Roll Capacity with ability to use 83 mm, 80 mm, 60 mm and 58
mm wide paper rolls.
●Can use paper roll with a maximum of 102 mm diameter.
●Equipped with USB interface as standard
●Replaceable interface board.
●High-speed parallel interface (Parallel interface model)
●Built-in cash drawer interface.
●Auto cutter mechanism provided as a standard.
●User customization such as memory switch setting are available.
●Page mode. Now you can arrange pages freely.
●Registration of user-defined characters and logos into flash memory.
●Barcode & 2D Barcode printing is supported.
●2-color printing is supported (When specified paper is used).
●Error indication is available with LED or buzzer.
[Only CT-S2000L, CT-S2000DCL]
●High-speed printing at a maximum of 220 mm/s is possible (* 154 mm/s at
standard density on label paper).
●Usable with label paper of 57.5 mm, 59.5 mm, and 79.5 mm wide other than
82.5 mm wide.
●Automatic adjustment of paper sensor sensitivity is available.usable without
step.
*Description marked “*L” in this manual is the description for CT-S2000L/CT-S2000DCL. Read this
manual after confirming your model in use.

— 10 —
1.2 Unpacking
When unpacking the printer, confirm that the following are provided:
●Printer: 1
●AC adapter (Option, only for CT-S2000DC): 1
●AC power cord (Option, only for CT-S2000DC): 1
●Sample paper roll: 1 roll
●Quick start guide: 1
●CD-ROM: 1
CT-S2000
(AC power type) Sample paper roll
CD-ROM
AC power cord
1.3 Model Classification
The printer models are classified by the following designation method:
CT-S2000DC
(DC power supply type)
AC adapter
(Option)
CT - S2000 RS E - BK -
Label/Black mark
No marking: Standard
L: Label
M: Black mark
Body case color
WH: Cool white
BK: Black
GR: Dark Grey
Interface
PA: IEEE1284 & USB
RS: RS-232C & USB
UB: USB only (Option)
ET:Ethernet+USB
Power supply
No marking: AC power type
(built-in power supply)
DC: DC power supply type
Character set, AC cable,
E: Europe
U: USA
Sample paper roll
AC power cord
(Option)
Quick start guide
CD-ROM
Quick start guide

— 11 —
1.4 Basic Specifications
Item Specifications
Model CT-S2000 PA, CT-S2000 RS, CT-S2000DC PA, CT-S2000DC RS
Print method Line thermal dot print method
Print width *1 80 mm/640 dots, 72 mm/576 dots, 54.5 mm/436 dots,
54 mm/432 dots
Dot density 8 ×8 dots/mm (203 dpi)
Print speed 220 mm/s (Fastest, print density 100 %), 1760 dot lines/s
Number of print
columns *2
Character size *4 Font A: 1.50 ×3.00 mm
Font B: 1.13 ×3.00 mm
Font C: 1.00 ×2.00 mm
Character type Alphanumeric, International, PC437 PC850/852/857/858/860/863/864/
865/866/WPC1252/Katakana/Thai code 18
User memory 384 KB (Capable of registering user-defined characters and logos)
Types of bar code UPC-A/E, JAN (EAN) 13/8 columns, ITF, CODE 39, CODE 128,
CODABAR, CODE 93, PDF417, QR Code
Line spacing 4.23 mm (1/6 inch)
Paper roll Thermal paper roll: 83 mm/80 mm/60 mm/58 mm
×Maximum φ102 mm
Paper thickness: 65-85 µm
Interfacing Serial (RS-232C compliant), Parallel (IEEE 1284 compliant), USB, Ethernet
Cash drawer interface 2 cash drawers are supported.
Input buffer 4k bytes/45 bytes
Supply voltage DC 24 V ±7%
Power consumption Approx. 70W (in normal printing)
AC adapter Rated input: AC 100 to 240 V, 50/60 Hz, 150 VA
Rated output: DC 24 V, 1.9A (35AD1, 35AD2), 2.1A (36AD1, 36AD2)
Model 35AD1 or 36AD1 for CT-S2000 /
Model 35AD2 or 36AD2 for CT-S2000DC
Weight CT-S2000:Approx. 2 kg, CT-S2000DC:Approx. 1.8 kg
Outside dimensions 147 (W) ×207 (D) ×147 (H) mm
Operating temperature 5 to 45°C, 10 to 90% RH (No condensation)
and humidity
Storage temperature −20 to 60°C, 10 to 90% RH (No condensation)
and humidity
Reliability Print head life: 150 km, 2 ×108pulses (At normal temperature/
humidity with recommended paper used)
Auto cutter life:2 million cuts (At normal temperature/
humidity with recommended paper used)
Safety standard *3 UL, C-UL, FCC Class A, TÜV-GS, CE Marking
+0
−1
83mm 80mm 60mm 58mm
Font A 53 48 36 35 12 ×24
Font B 71 64 48 46 9 ×24
Font C 80 72 54 52 8 ×16
Number of print columns
(columns)
Dot configuration
(Dot)
Paper width
Font
+0
−1
+0
−1
+0
−1

— 12 —
2. EXPLANATION OF PRINTER PARTS
2.1 Printer Appearance
Printer cover
Power switch Operation panel
Cover open button
Rear connector
(Front view) (Rear view)
●Printer cover
Paper is loaded under this cover.
●Cover open button
To refill or replace paper, open the printer cover by lifting the cover open
button.
●Power switch
This switch turns the printer power ON/OFF.
Notes:
*1: When paper width is 83, 80, 60, 58 mm
*2: The number of printable columns is selectable with a Memory Switch.
The number of columns in this table refers to typical model. Printer varies partly in the number
of columns depending on printer specifications.
*3: This rating is obtained by the use of specified AC adapter (35AD1, 35AD2, 36AD1 or 36AD2).
*4: As each character size includes the space inside the character font, actual character looks
smaller.

— 13 —
●POWER LED
Illuminated when the printer power is on and off when the printer power is
off. May blink or light in a special mode or in case of failure.
●ERROR LED
Illuminated or blinks when paper is empty or in case of failure.
The interval length of blinking represents the type of error.
●FEED button
Pressing this button once causes the paper to feed one line. The longer the
button is pressed, the more paper is fed.
In case of auto cutter error, press the FEED button after removing the cause
of the error.
POWER LED
FEED button
ERROR LED
Interface connector
(Serial, parallel, Ethernet, etc.)
Cash drawer
kick-out connector
Power connector
(DC power supply type)
Rear Connectors
Interface board
mounting screws
Operation Panel
AC inlet
(AC power type)
USB connector
See 4.6 Error Indication
●Interface connector (Serial, parallel, Ethernet, etc.)
Connects to the interface cable. A DIP switch is provided on the serial interface
board.
●Cash drawer kick-out connector
Connects to the cable from the cash drawer.
●AC inlet (AC power type)
Connects to AC power cord
●Power connector (DC power supply type)
Connects to the cable from AC adapter.

— 14 —
2.3 Other Built-in Functions
●Buzzer
This printer has a built-in buzzer. It is operated in case of an error, operation,
or by a command.
●User memory
Allows downloading of user-defined characters and logo data in the
nonvolatile memory. This data remains stored even after the printer power
is off. For the registration method, refer to Command Reference Manual in
separate document. To acquire the Command Reference Manual, contact your
Citizen Systems dealer.
●Memory switch
Setting of various kinds of functions can be stored in nonvolatile memory.
The functions are valid even if the printer power is turned off.
2.2 Printer Cover Inside
●Paper feed roller
Feeds paper as part of print
mechanism.
●Paper-near-end sensor
Detects near paper end, change
position in accordance with the
outer diameter of paper core.
●Auto cutter
Cuts the paper with a command
at the end of printing. Cutting
method is selectable between
partial cut and full cut with a
command.
●Print (thermal) head
Prints characters and/or graphic
data on thermal paper.
●Paper-end sensor
Stops printing when this sensor
detects paper end.
Print (thermal) head
Paper-end sensor
Auto cutter
Paper-near-end
sensor
Paper feed roller
See 4.6 Error Indication

— 15 —
3. PREPARATION
3.1 Connecting the AC Power Cord
1. Tu rn off the printer power.
2. ●For AC power type (with built-in power supply), connect the AC power
cord to the AC inlet at the back of the printer and plug the AC power cord
into the wall outlet.
●For DC power type, connect the AC adapter cable connector to the power
connector at the back of the printer with its flat surface facing interface
connector side.Then connect the AC power cord to the AC inlet of the AC
adapter and then plug the AC power cord to the wall outlet.
CAUTION!
■Use only the specified AC adapter with the printer.
■When disconnecting a cable, DO NOT pull out by the cable. Always hold the plug.
■Always keep the AC power supply away from other noise generating equipment.
■DO NOT pull the AC power cord. Otherwise fire, electric shock, or power disconnection
may result.
■If lightning is approaching, unplug the AC power cord from the wall outlet. Otherwise
fire or electric shock may result.
■Keep the power cord away from heat generating appliances. Otherwise the shield of
power cord may be fused resulting in a fire or electric shock.
■If the printer will not be used for a long time, leave it disconnected from its supply
outlet.
■Avoid locating the AC power cord in places which may cause tripping or falling.
AC inlet
AC power cord
AC power type
(built-in power supply) DC power supply type
AC power cord
AC inlet
Cable connector
Power connector
AC adapter
Flat side

— 16 —
Printer
Pin Signal
2TXD
3RXD
4RTS
6DSR
7SG
20 DTR
PC
Signal Pin
FG 1
TXD 2
RXD 3
CTS 5
DSR 6
SG 7
DTR 20
3.2 Connecting Interface Cables
Confirm that the power switch is OFF and connect the interface cable.
Orient the interface cable terminal correctly and insert it into the interface
connector.
CAUTION!
■For the method of using the Ethernet interface, refer to Separate volume.
■When disconnecting the cable, always hold the connector.
■Be careful not to insert the USB interface cable into the cash drawer kick-out connector.
Serial Interface Parallel Interface
For serial interface cable, use the one with the following connection.
25-pin - 25-pin cable 9-pin - 25-pin cable
Printer
Pin Signal
1FG
2TXD
3RXD
4RTS
6DSR
7SG
20 DTR
PC
Signal Pin
RXD 2
TXD 3
DTR 4
SG 5
DSR 6
CTS 8
USB Interface
CAUTION!
Avoid locating the interface cable in places which may cause tripping or falling.

— 17 —
CAUTION!
DO NOT connect any other device than the specified cash drawer to the cash drawer
kick-out connector. (DO NOT connect a telephone line either.)
3.3 Connecting the Cash Drawer
Cash drawer
kick-out connector
Cash drawer cable connector
(1) Connector Pin Configuration
(2) Electrical characteristics
1) Driving voltage: 24 VDC
2) Driving current: Approx. 1A max. (shall not exceed 510 ms.)
3) DRSW signal: Signal levels: “L” = 0 to 0.5 V, “H” = 3 to 5 V
(3) DRSW signal
DRSW signal status can be tested with
the DLE+EOT, GS+a, or GS+r command or
at pin 34 on the parallel interface port.
(4) Drive Circuit (printer side)
No. Signal Function
1FG Frame Ground
2DRAWER 1 Drawer 1 drive signal
3DRSW Drawer switch input
4VDR Drawer drive power supply
5DRAWER 2 Drawer 2 drive signal
6GND Common ground on circuits
61
Connector used:
TM5RJ3-66 (Hirose)
or equivalent
Applicable connector:
TM3P-66P (Hirose) or
equivalent
CAUTION!
■No output is produced while printing.
■The cash drawers 1 and 2 cannot be driven simultaneously.
■A solenoid used for the cash drawer should be of 24 Ωor more. The output current
should be kept at 1A or less; otherwise, breakdown or burning could occur.
VDR
1
2
3
4
5
6
VDR
5V
1. Confirm that the power switch is OFF.
2. Confirm the top and bottom of the cash
drawer cable connector and insert it into
the cash drawer kick-out connector at the
back of the printer.
3. Screw the cash drawer's ground wire to the
body of the printer.