Citizen MLT-289 User manual

0^07874
CITIZEN
PRINTER MECHANISM
Product Guide
ПРИНТЕРЫ СИТНЗЕВ
TEJL(095) 970-94-03
WWWCITIZEN-PRINTERS.RU
[email protected]U

А
CITIZEN PRINTERS —
builtwith allthe featuresand specificationsrequired to
satisfy the toughestjobs.
No matterwhat the application is, Citizen hasa printer to meetyourmostdemandingneeds. With a complete line ofPOS
Printers andOEM mechanisms to choose from,Citizenmakes it easy foryouto find the right printer forthe right job.
Select from oneofthe industry'swidestvarieties ofdot matrix and thermal printers with standardfeatureslikesemi-
automaticpaperloading,compactdesign, and high-speed performance. Notto mention a range of optionsthatinclude
winders,autocutters, and multicolorribbons.When it comes to quality, reliability and longlastingvalue you know youcan
depend on Citizen. All Citizenproducts are backed bythe resources and reputation ofa worldwide leader inPOS printers
andOEM mechanisms.
.
-
A
*4.
к

CONTENTS
I LineThermalPrinterMechanisms
I Dot Impact Printer Mechanisms
Accessories/Options
18 ControlBoards/Chips
19 Cutters
20 Ribbons/Winders
21 AccessoryReferenceTable
DP-61XF
DP-61X Series
15
DP-654/6

Line Thermal Printer Mechanisms
Type Classification
(i) Model
PPU-700 P E ppu-700
@ Interface (3) Character set
P: Parallel K: Japan
R: Serial U:US
E: Europe
Specifications
Printingmethod
Printingwidth
Line thermal dot printing
80mm/640 dots(paper width 83mm)
72mm/576 dots(paper width 80mm)
60mm/480 dots(paperwidth67mm)
54mm/432dots(paper width 58mm)
8 dots/mm
150 mm/sec, (max),1200dot-lines/sec.
Dot pitch
Printingspeed
Number of columns 53 columns(Font A),71 columns(Font B)
Font size
Fonts
Barcode type
Logo registration/
print
Line spacing
Printingpaper
Interface
Inputbuffer
Command
Sensors
Power sourcevoltage
Power consumption
Weight
1.25 mm x^.OO mm (Font A:12x 24 dots)
] 0.88 mmx 2.13 mm (Font B:9 x 17 dots)
Alphanumeric,Internationalcharacters,
Codepages PC437,Katakana,PC850,PC852,
PC857, PC860,PC863,PC865,PC866,
Windowscode
UPC-A/E, JAN(EAN)13/8columns, ITF, CODE39,
[CODE128 CODABAR, CODE93
Capable of registeringuser-definedcharacters
and logos into flash memory.
4.23 mm (1/6inches);selectable by commands
Thermal paperroll: Paper width83/80/67/58 mm
Paper roll diameter 203mmor less
Paper thickness 0.065 - 0.150 mm
Core diameter : 12mm (paperthickness :
0.065 - 0.080 mm) 25.4 mm (paperthikness :
0.080-0.150 mm)
Recommended paper : TF-50KS-E, TF-62KS-E
(NipponPaperindustries)
Serial (RS-232C), Parallel (IEEE1284 comliant,
Bi-directionalcommunication)
4K bytes (72 bytesselectable with a DIP switch)
ESC/POS
Paper near end sensor (adjustable, for PHU series)
(photointerrupter)
Paper end sensor(mechanicalswitch)
Black marksensor(photointerrupter)
Cover opensensor(mechanicalswitch)
Paper out sensor(photo interrupter)
24V ±7%
100W
PPU: 2.1kg (incl. controlPCB)
! PHU:0.95 kg (excl. roll paper)
External dimensions PPU:163.2(incl.controlPCB) x 176x 143mm
(Wx D x H) PHU: 114.4-138.9 x 122.6 x 137.2mm
Operating temperature/
humidity
Storage temperature/
humidity
Reliability
Safety standard
5 - 40°C, 35- 85%RH (No condensation)
-20 ~ 60°C, 10- 90%RH (No condensation)
Mechanism : 20,000,000 lines
Thermalhead : 100,000,000 pulses or100km
Auto cutter : 1,000,000cuts(whenusing 65- 85um)
UL, C-UL, FCC class A, TUV-CE marking
3 ) LineThermalPrinterMechanisms

Type Classification
MLT-288 H
©Model
MLT-288
MLT-289
LT-286
r2)
Paper path (MLT-288)
H: Curl
V: Straight
KIOSK Unit
PaperPaper
PPU-231 Type 11
Features
1 Easy paperhandling
• Paperautoloading
• Paperretractablefunction
Specifications
Printing method
Printing width
Dot pitch
Printing speed
Number of columns
Line thermal dot printing
72mm/576 dots
8 dots/mm
Font size
Fonts
Barcode type
Line spacing
Printing paper
62.5mm/sec. [Max.](500dot-lines/sec.)
48 columns(Font A), 64 columns(Font B)
1.25mm x 3.00mm(Font A:12x 24 dots)
0.88mm x 3.00mm(Font B:9 x 24 dots)
Alphanumeric, International characters
UPC-A, JAN (EAN) 13 col./8 col., ITF, CODE39,
CODE128,CODABAR
4.23mm(1/6")Selectable by command set
(Min. 1/203inch).
Interface
| Inputbuffer
Command
Sensors
Power sourcevoltage
Power consumption
j Weight
External dimensions
(WxDxH)
Operating temperature/
humidity
Storage temperature/
humidity
Reliability
Safety standard
Thermal roll paperwidth:80mm
External diameter: 0203mm (with paper holder unit)
Internaldiameter:025.4mm
Paper thickness: 60to 85цт
Recommended paper: TF-50KS-E, TF-62KS-E
(NipponPaperIndustries)
Serial (RS-232C) or Parallel (IEEE1284 comTiantT"
Bi-directionalcommunication)
4K bytes
ESC/POS
Paper near end sensor (adjustable, forPHU series)
Paper end sensor(for PMU series)
Black marksensor(option)
24V±7%
100W
PPU: 1.6kg (incl. controlPCB)
PHU: 0.9kg (excl. roll paper)
PPU: 153.7 x 160 x 172mm
PHU:132.2 x 120x 125.2mm
5 - 40°C, 35~ 85%RH (No condensation)
-20~ 60°C, О ~ 90%RH (No condensation)
Specifications
Printing method
Total dots
Dot density
Printing width
Printing speed
: Paper feeding pitch
; Sensors Headtemperature
Paperpresence
Head-up
Voltage range VH
Vdd
Current Head (VH=5V)
consumption Motor (VH=5V)
Recommended Width
paper Thickness
Line thermal dot printing
384 dots/line
8 dots/mm
48mm
Max. 400 dot-lines/sec.
0.125mm
Thermistor
Photo-interrupter
Mechanicalswitch
DC 4.2 - 8.5V
DC 4.755.25V
Max. Approx. 2.3A
Max.Approx.0.5A
58mm
60 - 72um
Paper (Manufacturer)
Reliability Headpulse-resistance
Headwear-resistance
Environment Operation
Storage
External dimensions (Wx D x H)
KF50-HAD (Shin-Oji)
50,000,000 pulses or more
50km or more
Weight
Temperature: 0 - 45°C
Humidity: 35 - 85%RH
Temperature: -20 - 60°C
Humidity: 10 - 90% RH
75 x 56.5 x 21mm
Approx. 82g
Accessories
Controlboard О BD2-2860U Controlchip Q 202PC-04
Gate array О 202LA-00
Head:50,000,000 pulses or30km
Autocutter:300,000cuts
UL, C-UL, FCC class A, TUV-CEmarking
|Эт|ргг
PPU series PHU series 31AD
•Printer presenter unit -Paper holdingunit -Power supplyunit
PRU senes PMU series
•Presenter unit 'Printer mechanis
202LAOO
Interface
Number of columns
Font
Command set
Barcode
Firmware location
Buffer
Supporting devices
Dimensions
Source voltage
Gate array
Parallel and RS-232C
Font A:32
Font B:42
Font A: 12x24 dots
Font B: 9x24
ESC/POS
Supported
Masked CPU
2k bytes
Auto cutter, Paper sensor, Head-up,
LF switch, Error LED, Paper outLED
80x80mm
5.0±5%
202LA-00
Autocutter О ACS-224
Cutting method
Paper width
Max. cutting frequency
Voltage*
Current (peak)
Operating temperature
Size
Weight
Reliability
Number oftab left
(F) ull cut blade type
(P) artical cut blade type
Slide cutting
45— 69mm
0.06-0.15 mm
20 cuts/min
5V ±10%
2.8A
0-45 С
80x55.7x15 mm
140g
500,000 cu
None
None or 1 tab
'For somemodels,othervoltages are also available.
Line ThermalPrinterMechanisms

Line ThermalPrinterMechanisms
Type Classification
MLT-288 H
Paper path (MLT-288)
H: Curl
V: Straight
Model
MLT-288
MLT-289
LT-286
Specifications
Printing method
Total dots
i Dot density
Printing width
Printing speed
Paper feeding pitch ! 0.125mm
SensorsHeadtemperatureThermistor
Line thermal dot printing
Jth
ted
384 dots/lines
8 dots/mm
48mm
Max. 420 dot-lines/sec.
Specifications
Printing method
Total dots
Dot density
Printingwidth
Printingspeed
Linethermal dot printing
384 dots/lines
8 dots/mm
Voltage range
Paper presence
Head-up
VH
Vdd
Current
consumption
Head(VH=5V)
Motor(VH=5V)
Recommended Width
Photo-interrupter
Mechanicalswitch
DC 4.2-8.5V
DC 4.75-5.25V
paper
Reliability
Environment
Thickness
Paper (Manufacturer)
Head pulse-resistance
Head wear-resistance
Operation
Storage
External dimensions (Wx D x H)
Weight
Max.Approx. 1.7A
Max.Approx. 0.5A
58mm
60- 72ЦГП
TF50KS-E2C (NipponPaper)
100,000,000 pulses or more
50km or more
Temperature: 0 ~ 45°C
Humidity: 35 - 85% RH
Temperature: -20~ 60°C
Humidity: 10~ 90%RH
72.7 x 38x 15mm
Approx. 45g
Paper feedingpitch
Sensors Headtemperature
Paper presence
Head-up
Voltage range VH
Vdd
Current Head(VH=5V)
consumption
Motor (VH=5V)
Recommended Width
paper Thickness
48mm
Max. 420 dot-lines/sec.
0.125mm
Thermistor
Photo-interrupter
Mechanicalswitch
DC 4.2-8.5V
Reliability
Environment
Paper (Manufacturer)
Headpulse-resistance
Headwear-resistance
Operation
Storage
External dimensions (Wx D x H)
Weight
DC 4.75 - 5.25V
Max.Approx. 1.7A
Max. Approx. 0.5A
58mm
65um
TF50KS-E2C (NipponPaper)
100,000,000 pulses or more
50km or more
Temperature: б ~ 45°C
Humidity: 35~ 85%RH
Temperature: -20~ 60°C
Humidity: 10- 90% RH
76.8 x37 x 16mm
Approx. 50g
Accessories
Controlboard О BD2-2880U Gate array О 202LA-00
Accessories
Controlboard О BD2-2880UGatearray О 202LA-00
BD2-2880U
tfA
202LA-00
Auto cutter О
Interface
Number of columns
Font
Command set
Barcode
Firmwarelocation
Buffer
Supportingdevices
Dimensions
Sourcevoltage
Gate array
ACS-228
Cutting method
Paper width
thickness
Parallel and RS-232C
Font A:32
Font B: 42
Font A: 12x24 dots
Font B: 9x24 dots
ESC/POS
Supported
Flash memory
2k bytes
Auto cutter, Paper sensor, Head-up sensor,
LF switch, Error LED, Paper outLED
75x80mm
5.0±S%
202LA-00
Slide cutting
45 69mm
0.06 -0.15 mm
Interface
^gm^^a^—. Number of columns
Font
ijHflL • «__>___^^^_
•1 Command set
Barcode
BD2-2880U Firmware location
Buffer
^^^^ Supporting devices
202LA-00 Dimensions
Source voltage
Gate array
Parallel and RS-232C
Font A:32
Font B:42
Font A: 12x24 dots
Font B: 9x24 dots
ESC/POS
Supported
Flash memory
2k bytes
Auto cutter, Paper sensor, Head-up sensor,
LF switch,ErrorLED,Paper outLED
75x80mm
5.0±5%
202LA-00
Max.cuttingfrequency 20 cuts min
;
'~~~~*? у
/*^^L_ •]
^^^t^^Jy'
ACS-228
Voltage*
Current (peak)
5V ±10%
2.8A
Operating temperature 0 — 45°C
Size
Weight
Reliability
Number oftab left
(F)ull cut bladetype
80x55.7x15 mm
140g
500,000 cuts
None
(P)artical cut bladetypeNone or1 tab
*For somemodels,othervoltages are alsoavailable.
Line ThermalPrinterMechanisms

Type Classified
^•••B
MLT-388
Specifications
Printing method Line thermal dot printing
Total dots 576 dots/lines
Dot density 8 dots/mm
Printing width 72mm
Printing speed Max. 480 dot-lines/sec.
Paper feeding pitch 0.125mm
Sensors HeadtemperatureThermistor
PaperpresencePhoto-interrupter
Head-up Mechanicalswitch
Voltage range VHDC4.2— 8.5V
Vp DC 4.2 -8.5V
Vdd DC 4.75 - 5.25V
Current Head (Vp=5V) Max.Approx.2.5A
consumption Motor (Vp=5V) Max.Approx. 0.5A
Recommended Width 800/-1mm
paper Thickness 65цт
Paper (Manufacturer)TF50KS-E2D(NipponPaper)
Reliability Headpulse-resistance 10,000,000 pulses or more
Headwear-resistance50km or more
Environment OperationTemperature: 0 - 45°C
Humidity: 35~ 85%RH
StorageTemperature: -20~ 60°C
Humidity: 10 - 90% RH
External dimensions (Wx D x H) 99.5 x 41x 21mm
Weight Approx. 95g
1 Specifications
Printing method
' Total dots
Dot density
Printing width
Line thermal dot printing
576 dots/lines
8 dots/mm
72mm
Printing speedMax. 480 dot-lines/sec.
Paper feeding pitch
Sensors Headtemperature
Paper presence
Head-up
Voltage range VH
0.125mm
Thermistor
Photo-interrupter
Mechanical switch
DC 4.2 - 8.5V
Vp , DC 4.2 -8.5V
Vdd DC 4.75 -5.25V
Current Head (Vp=5V)
consumption Motor(Vp=5V)
Recommended Width
paper Thickness
| Paper(Manufacturer)
Reliability Headpulse-resistance
I Headwear-resistance
Environment Operation
Storage
External dimensions (Wx D x H)
Weight
Max. Approx. 2.5A
Max. Approx. 0.5A
80 0/-1mm
65|am
TF50KS-E2D (Nippon Paper)
10,000,000 pulses or more
50km or more
Temperature: 0 ~ 45°C
Humidity: 35~ 85%RH
Temperature: -20~ 60°C
Humidity: 10- 90% RH
99.5x41 x21mm
Approx. 95g
Accessories
Control board О BD2-3880U Gate array Q 202LA-00
Interface Parallel and RS-232C
^^^^^^^.^ Number of columns Font A:48
Font Font A: 12x24dots
Command set ESC/POS
BD2-3880U !?.arCOde . Supported
rirmware location Hashmemory
Buffer 2k bytes
^^^^^ Supporting devicesAutocutter,Paper sensor, Head-upsensor,
^j^Hp LF switch, ErrorLED,Paper outLED
202LA-00 Dimensions 80x90mm
Source voltage 5.0+5%
Gate array 202LA-00
Accessories
Control board Q BD2-3890U Gate array Q 202LA-00
Interface Pare
Number of columns Fon
_ ^ Fon
Font Fon
Fon
Command setESC
BD2-3890U "0rCOde . 'UP
Firmware location Flos
Buffer 2kfc
^^J^L Supporting devices Aut
202LA-00 Dimensions 80x
Source voltage 5.0:
Gate array 202
llel and RS-232C
A:48
B: 64
A: 12x24dots
B: 9x24dots
/POS
Dorted
i memory
ytes
э cutter,Paper sensor, Head-upsensor,
witch, ErrorLED,Paper outLED
90mm
-5%
LA-00
Line Thermal Printer Mechanisms ( 6

Line Thermal Printer Mecha
Type Classification
LT-1 2 2 ОН A
© (2) (3)® ©
©Size
2: 2inchclass
3: Sinch class
(D Voltage
2: 24V
@Type
0: Standard
Paper
Ф Paper path
H: Curl
V: Straight
(5) Paper pressure
None: Standard (60-105цт)
A: For thick paper (110-150цт)
Paper
Specifications 1 Specifications
Printing method
Total dots
Dot density
Printing width
Printing speed
Paper feeding pitch
Sensors Headtemperature
Paper presence
Head-up
Voltage range VH
Vdd
Current Head
consumption
Motor
Recommended Width
PaPer Thickness
Paper (Manufacturer)
Reliability Headpulse-resistance
Line thermal dot printing
432 dots/lines
8 dots/mm
54mm
Max. 640 dot-lines/sec.
0.125mm
Thermistor
Photo-sensor
Photo-sensor
DC 21.6 -26.4V
DC 4.755.25V
Max.Approx. 5.2A
Max.Approx.0.41A
58mm
60— 105цт (Standard)
110- 150um(Atype)
TF50KS-E2C (NipponPaper)etc.
50,000,000pulses or more
Headwear-resistance50km or more
Environment Operation
Storage
External dimensions (Wx D x H)
Weight
Temperature: 0 - 45°C
Humidity: 35 ~ 85%RH
Temperature: -20~ 60°C
Humidity: 10 - 90% RH
91. 5 x 58x 20mm
Approx. 87g
Printing method
Total dots
Dot density
Printing width
Printing speed
Paper feeding pitch
Sensors Headtemperature
Paper presence
Head-up
Voltage range VH
Vdd
Current Head
consumption
Motor
Recommended Width
P°per Thickness
Paper(Manufacturer)
Line thermal dot printing
576 dots/lines
8 dots/mm
72mm
Max. 640 dot-lines/sec.
0.125mm
Thermistor
Photo-sensor
Photo-sensor
DC 21.6 -26.4V
DC 4.75 -5.25V
Max.Approx. 5.2A
Max.Approx.0.41 A
80mm
60 — 105цт (Standard)
110-150цт(А1уре)
TF50KS-E2C (NipponPaper)etc.
Reliability Headpulse-resistance 50,000,000 pulses or more
Headwear-resistance50km or more
Environment Operation
Storage
External dimensions (Wx D x H)
Weight
Temperature: 0 - 45°C
Humidity: 35 - 85% RH
Temperature: -20~ 60°C
Humidity: 10 - 90% RH
108x 58x 20mm
Approx. 99g
Accessories 1 Accessories
Control board О BD2-1220U Gate array О 202LA-00
Interface Parallel andRS 232C
__^^^^^^_ Number of columns 36/48
HM FontFont A: 12x24dots
Q| Font B: 9x24dots
Command set ESC/POS
BarcodeSupported
BD2-1220U Firmware location Flash memory
Buffer 4k bytes
^^^^ Supporting devicesAutocutter, Paper sensor. Head up sensor,
^^^^ LF switch,ErrorLED.Paper out LED
Dimensions90x65mm
202LA-00 Source voltage 5.0+5% and 24V±5%
Gate array 202LA-00
Autocutter О ACS-225
Cutting method Slide cutting
Paper width 45—69mm
thickness 0.06 - 0.15 mm
. __^^ Max. cutting frequency 20 cuts min
"* -Л Voltage* 24V ±10%
*!^«IL-— У Current (peak) 0.8A
^^•^5^ Operating temperature 0 — 45°C
Size80x55.7x15 mm
ACS-225 Weight 140g
Reliability 500,000cuts
Number oftab left
(F)ull cut blade type None
(P)artical cut blade typeNone or1 tab
Control board О BD2-1220U Gate array О 202LA-00
Interface Pa
-—5^^^^™™* Number of columns 48
Command set ES(
BD2-1220U Firmware location Fla
Buffer 4k
^^^k Supporting devices Au
Dimensions 90
202LA-00 Source voltage 5. С
Gate array 20
Auto cutter О ACS-235
alleland RS-232C
/64
tA: 12x24dots
tB: 9x24dots
sported
Dytes
to cutter,Paper sensor, Head-up sensor,
switch, ErrorLED,Paper outLED
к65тт
2LA-00
Cutting method Slide cutting ^^ЛЯ^Ш
Paper width 50 — 89mm
thickness 0.06 -0.15 mm Ж ^^
Max. cutting frequency 20 cuts min
'fSftjj. Voltage* 24V ±10% *Ч*Л ''
•^jiiiii, .? Current (peak) 0.8A
Operating temperature 0- 45°C
Size102x55.7x15 mm
ACS-235
Weight 180g
Example for
Reliability 500,000cuts
Number oftab left
(P)artical cut blade type None or1 tab
( 7 J LineThermalPrinterMechanisms
'For some models, other voltages are also available.

Type Classification
LT-1 2 2 1С
© @(3) (4)
©Size
2: 2inchclass
3: Sinch class
® Voltage
2: 24V
@}ЧУре
1: Removable platen model
@Cutter
None: Standard
C: With cutter
Specifications
Printing method Linethermal dot printing
Total dots 432 dots/lines
Dot density 8 dots/mm
Printing width 54mm
Printing speed Max. 640dot lines/sec.
Paper feeding pitch 0.125mm
SensorsHeadtemperatureThermistor
Paper presencePhoto-sensor
Head-up MechanicalSwitch
Voltage range VH DC 21.6 - 26.4V
Vdd DC 4.75 -5.25V
Current HeadMax.Approx. 5.2A
consumption MotorMax.Approx.0.41A
Recommended Width 58mm
PaPer Thickness 60— 105|jm (Standard)
110- 150|jm (A type)
Paper (Manufacturer) TF50KS-E2C (NipponPaper)etc.
Reliability Headpulse-resistance 50,000,000 pulses or more
Headwear-resistance50km or more
Environment OperationTemperature: 0 ~ 45°C
Humidity: 35 - 85% RH
StorageTemperature: -20 ~ 60С
Humidity: 10- 90% RH
External dimensions (WxDxH) 91. 5 x 58x 20mm (LT-1221)
101.3 x 61.5 x 37.2mm(LT-1221C)
Weight Approx. 85g (LT-1221)
Approx. 273g(LT-1221C)
Accessories
Control board О BD2-1221 U Gate array О 202LA-00
Interface Parallel and RS-232C
Number of columns 32/42
Firmware location Flashmemory
Buffer 4k bytes
^^^k SupportingdevicesAuto cutter, Paper sensor, Head up sensor,
^^^m LF switch, ErrorLED, Paper outLED
Dimensions90x65mm
202LA-00 Sourcevoltage 5.0±5% and 24V±5%
Gate array 202LA-00
AutO CUtter О ACS-220C/CF (Auto cutter onlyfor 1221C)
Cutting method Slide cutting
Paper width 58mm
thickness0.06 - 0.15 mm
Max.cuttingfrequency 20 cuts/min
^~~> Voltage* 24V ±10%
, ^^^ .') Current (peak) 0.8A
Operatingtemperature 0 45°C
Size 102x55.7x15 mm
ACS-220C/CF
Weight 180g
Reliability300,000 cuts
Number oftab left
(F)ull cut bladetypeNone
(P)artical cut blade typeNone or1 tab
Specifications
Printing method
Total dots
Dot density
Printing width
Printing speed
Paper feeding pitch
Sensors Head temperature
Paper presence
Head-up
Voltage range VH
Vdd
Current Head
consumption Motor
Recommended Width
P°Per Thickness
Paper (Manufacturer)
Reliability Head pulse-resistance
Head wear-resistance
Environment Operation
Storage
External dimensions (Wx D x H)
Weight
I Accessories
Line thermal dot printing
576 dots/lines
8 dots/mm
72mm
Max. 640 dot-lines/sec.
0.125mm
Thermistor
Photo-sensor
MechanicalSwitch
DC 21.6 -26.4V
DC 4.755.25V
Max. Approx. 5.2A
Max.Approx.0.41A
80mm
60— 105цт (Standard)
110- 150um (A type)
TF50KS-E2C (NipponPaper)etc.
50,000,000 pulses or more
50km or more
Temperature: 0 ~ 45°C
Humidity: 35 - 85% RH
Temperature: -20 - 60°C
Humidity: 10- 90% RH
108x 58x 20mm (LT-1321)
119 x 61.5 x 37.2mm(LT-1321 C)
Approx. 97g (LT-1321)
Approx. 330g(LT-1321C)
Control board О BD2-1221U Gate array О 202LA-00
Interface Parallel and RS-232C
Number of columns 32/42
• Font Font A: 12x24 dots
Font B: 9x24 dots
Command set ESC/POS
Barcode Supported
1221U Firmware location Flashmemory
Buffer 4k bytes
^^^k SupportingdevicesAuto cutter, Paper sensor, Head up sensor,
^^^Ш LF switch, ErrorLED, Paper outLED
Dimensions90x65mm
202LA-00 Sourcevoltage 5.0±5% and 24V±5%
Gate array 202LA-00
Auto cutter О ACS-230C/CF (Auto cutter only for 1321 С)
Cutting method
Paperwidth
thickness
Max.cuttingfrequency
•^^^ Voltage*
£*^^^^ Current (peak)
Operating temperature
ACS230C/CF Weight
Reliability
Number oftab left
(F)ull cut blade type
(p)artical cut blade type
Slide cutting
58 mm
0.06-0.15 mm
20 cuts/min
24V ±10%
0.8A
0-45°C
102x55. 7x15 mm
180g
300,000 cuts
None
None or1tab
'For some models, other voltages are also available.
Line Thermal Printer Mechanisms ( 8

Line ThermalPrinterMechanisms
Type Classification
LT-4 8 1V
®@(D0
©Size
2: 2 inch class
4: 4 inchclass
@ Dot density
8: 8 dots/mm
(3, Type
281: 60mm. 24V
481: 112mm, 24V
©Paper path(for LT-481)
H: Curlpath
V: Straight path
Paper Paper
Specifications
Printing method
Total dots
Dot density
Printingwidth
Printing speed
Paper feedingpitch
Sensors Headtemperature
Paperpresence
Head-up^
Vp
Vdd
Head
Motor
Line thermal dot printing
448 dots/lines
8 dots/mm
56mm
Max. 101.6mm/sec.
(813dot-lines/sec.)
0.125mm
[ Thermistor
Photo-interrupter
Voltagerange
Current
consumption
Recommended Width
PQPer Paper (Manufacturer
Mechanical switch
24yJDC±50/o
5V DC+5%
0.9A
I 0.39A
59.5mm
1
' TF50SY-EY, TF50KS-E2C
Reliability
Environment
Headpulse-resistance
Headwear-resistance
Mechanical life (MCBF)
Operation
Storage
External dimensions (Wx D
(NipponPaper)
100,000,000 pulses or more
100km or more
23,600,000 lines
Temperature: 5 ~ 40°C
Humidity: 35~ 80%RH
Temperature: -20 ~ 60°C
Humidity: 10- 90% RH
111/5 x 53.5 x 40.8mm
Weight Approx. 300g
Accessories
Auto cutter
О AC-5/5F О АС-7
О ACS-229
Cutting method
Paper width
thickness
Max. cutting frequency
Voltage*
Current (peak)
Operating temperature
Size
Weight
Reliability
Number oftab left
(F)ull cut blade type
(P)artical cut blade type
Guillotine
59.5 ±0.5mm
0.065 mm
6 cuts/min
24V ±10%
1.3A
5 - 40°C
70x55x31.7 mm
160g
300,000 cuts
None or 1 tab
Several tabs
Rota ry
59.5 ±0.5mm
0.15 mm
10 cuts/min
24V ±10%
1.3A
5-40°C
96.5x85.5x40 mm
150g
500.000 cuts
None or1 tab
Several tabs
Slide cutting
45 -69mm
0.06-0.15 mm
20 cuts/min
24V ±10%
0.8A
0 - 45°C
80x55.7x15 mm
140g
500,000 cuts
None
None or1 tab
LT-481
Features
Low noise printing
High-speed printing
Highresolution
• Highreliability due to heavy
duty design
Specifications
Printing method
Total dots
Dot density
Printing width
Printing speed
Paper feeding pitch
Sensors Headtemperature
Paperpresence
Head-up
Voltage range Vp
Vdd
Current Head
consumption
Motor
Recommended Width
paper Paper (Manufacturer)
Reliability Headpulse-resistance
Headwear-resistance
Mechanical life(MCBF)
Environment Operation
Storage
External dimensions (Wx D x H)
Weight
Accessories
Line thermal dot printing
832 dots/lines
8 dots/mm
104mm
Max. 100mm/sec.
(800dot-lines/sec.)
0.125mm
Thermistor
Photo-interrupter
Machanicalswitch
24V DC±5%
5V DC±5%
1.6A
0.48A
111.5mm
TF50SY-EY, TF50KS-E2C
(Nippon Paper)
100,000,000 pulses or more
100km or more
8,000,000 lines
Temperature: 5 - 40°C
Humidity: 35- 80% RH
Temperature: -20~ 60°C
Humidity: 10 ~ 90%RH
161x 60X 41mm
Approx. 420g
Auto cutter
О АС-6
О ACS-249
Cutting method
Paper width
thickness
Max. cutting frequency
Voltage*
Current (peak)
Operating temperature
Size
Weight
Reliability
Number oftab left
(F)ull cut blade type
(P)artical cut blade type
Guillotine
111.5 ±0.5mm
0.065 mm
6 cuts mm
24V ±10%
1A
5 - 40°C
130x55x21.5 mm
260g
300,000 cuts
None or1 tab
Several tabs
Slide cutting
55 - 115mm
0.06-0.13 mm
20 cuts min
24V ±10%
08A
0-45°C
130x55.7x15 mm
220g
300,000 cuts
None
None or1 tab
'For some models, other voltages are also available.
9 ) LineThermalPrinterMechanisms

LT-483CF
iJSize
4: 4 inchclass
@ Dot density
8: 8 dots/mm
(3) Type
483: 2 station. 112mm. 24V
(4) Cutter
C: With cutter
None: No Cutter
P: Partial cut blade
LT-1322
®@<D
CO Size
3: 3 inch class
2: 2 station model
Paper Paper
Paper Paper
Specifications
Printing method
Total dots
Dot density
Printing width
Printing speed
Paper feeding pitch
Sensors Headtemperature
Paper presence
Head-up
Voltage range Vp
Vdd
Current Head
consumption
Motor
Recommended Width
paper
paper
(Manufacturer)
Reliability Head pulse-resistance
Headwearresistance
Environment Operation
Storage
Line thermal dot printing
832 dots/lines
8 dots/mm
44mm x 2
Max.100mm/sec.
(800dot-lines/sec.)
0.125mm
Thermistor
Photo-interrupter
Mechanical switch
24V DC±5%
5V DC±5%
1.2A
0.96A
49.5mm x2
TF50KS-E2C (Nippon Paper)
100,000,000 pulses or more
100km or more
Temperature: 5 - 40°C
Humidity: 35 - 80% RH
Temperature: -20 - 60°C
Humidity: 10~ 90%RH
External dimensions (Wx D x H) LT483: 155.2 x 60x 71.5mm
LT483CF: 155.2 X 67x 98.9mm
Specifications
Printing method
Total dots
Dot density
Printing width
Printing speed
Paper feeding pitch
Sensors Headtemperature
Paper presence
Head-up
Voltage range Vp
!
Vdd
Current Head
consumption Motor
Recommended Width
paper Paper(Manufacturer)
Reliability Headpulse-resistance
Headwear-resistance
Environment Operation
Line thermal dot printing
248 dots/lines x 2
8 dots/mm
38mm x2
Max.80mm/sec.
(640dot-lines/sec.)
0.125mm
Thermistor
Photo-interrupter
Photo-sensor
24V DC±10%
5V DC±5%
4.5A
0.4A
38mm x 2
TF50KS-E2C (NipponPaper)
50,000,000 pulses or more
50km or more
Temperature: 0 ~ 45°C
Humidity: 35- 85% RH
Storage Temperature: -20~ 60°C
Humidity: 10~ 90%RH
External dimensions (Wx D x H)120x 58x 24.5mm
Weight Approx. 97g
Weight
LT483: Approx.560g
LT483CF: Approx.750g
LT483CP: Approx. 760g
Accessories
Autocutter
Cuttingmethod
Paper width
thickness
Max.cuttingfrequency
Voltage'
Current (peak)
Operatingtemperature
Size
Weight
Reliability
Number oftab left
(F)ull cut bladetype
(P)artical cut bladetype
О AC-4P/4F
Guillotine
49.5 ±0.5 mm
0.063 mm
6 cuts mm
24V ±10%
1.3A
5 - 40°C
60x55x23 mm
260g
300,000 cuts
None or1 tab
Several tabs
Paper winder О AW-4H/4V
"For some models, other voltages are also available.
Line ThermalPrinterMechanisms (lOJ

Even as demand for thermalprinters is
growing, dot impact printers are still
requiredaround the world,withdemand
continuouslystrong.Theyfeature plain
paperprinting and high-speed printing, and
are indispensable for check and validation
applications. As with thermal printers, JCBM
emphasizes the development ofdot impact
printersbased onits precisionequipment
technology. In this wayit also makes a point
of offeringproducts that meetcustomer
needs in this printer category.
A
MD-910-SSA
© ® ®
fi'<
Type
910: 24 columns
911: 40 columns
(2) Knob
SS: No knob
HS: Horizontalknob
VS: Vertical knob
Paper
Specifications
Printing method
Printing direction
Printing speed
Number of columns
Font
Number of wires
Character size (Wx H)
Character pitch
Serial impact dot matrix
One-way printing
Approx. 2.5 lines/sec.
24 columns: 144 dots/line
5x7 matrix
8 pins (4 pins X 2 heads)
Approx. 1.7x 2.4mm
1.98mm(Interval of columns)
Motor
Dot pulsesensor
Home pulsesensor
Printingsensor
Paperfeedingsolenoid
Connecting method
Driving voltage
Printingpaper
Copy
Ink ribbon
Paper feedingspeed
External dimensions
(WxDxH)
Weight
Operatingtemperature
Storage temp, range
Reliability
Accessories
3.52mm (Interval of lines)
Voltage:5.0V DC/ Peak current:Approx. 1A /
Average current: 0.3A max.
Photo interrupter
Leaf switch
Voltage: 5.0 ?^V DC/ Resistance: 1.7 ±0.3£J (25"C)
Voltage: 5.0?!V DC / Resistance: 9 ±2Q (25C)
Copper foil patterns at 2.54mm pitch.
3.5 - 5.5V DC
57.5 ±0.5mm
Original print + 1 copy
Special ribboncartridge of black or purple
Approx. 5 lines/sec.
90x45.5 x 16mm
105g±10%
О ~ 50°C
-25 ~70 С
MCBF: 1.5 millionlines
Controlboard (J CBM-909-2D
Interface Parallel and serial
Number of columns 24
CBM-909-2D
Font
Command set
Firmware location
Buffer
Supportingdevices
Dimensions
Source voltage
5x7 (including half dot)
Unique
Masked CPU
1 line
LF switch,On-line switch
80x55.5mm
4.0+0.7 -1.0V
Custom controlchip 909PC-2DU
Control chip О 909PC-2DU
Paper winder О AW-5 (notsupported by свм-909)
Ink ribbon О IR-91, IR-91L {Long life)
11 ) Dot ImpactPrinterMechanisms

(3) Specialfeature
None: Regularmodel
A: Cold temperature model
Type Classification
DP-420 D F
® (D®
ф Type
420: 7 pin head
430: 9 pin head
@ Ribbon
D: 2 color
® Paperfeedmethod
F: Frictionfeed
Paper
roll
MD-911
Features
Specifications
Printingmethod
Printing direction
Printingspeed
Number of columns
Font
Number of wires
Charactersize (W x H)
Character pitch
Motor
Dot pulsesensor
Home pulsesensor
Printing sensor
Paper feedingsolenoid
Connecting method
Driving voltage
Printingpaper
Copy
Ink ribbon
Paper feedingspeed
External dimensions
(WxDxH)
Weight
Operatingtemperature
Storage temp, range
Compact design
Light weight
5V operation
Number of columns: 40 columns
Knob model (type V or type H)
Serialimpact dot matrix
One-way printing
Approx. 1.8 lines/sec.
40 columns: 180 dots/line
4x7 matrix
8 pins (4 pins x 2 heads)
Approx. 1.1x 2.4mm
1.17mm (Interval of columns)
3.52mm (Interval of lines)
Voltage:5.0V DC/ Peakcurrent:Approx. 1A /
Average current: 0.3A max.
Photo interrupter
Leaf switch
Voltage: 5.0 ?iV DC/ Resistance: 1.7 ±О.ЗП (25°С)
Voltage: 5.0 ?2
5
V DC/ Resistance: 9 ±2Li (25C)
Copper foil patterns at 2.54mm pitch.
3.5 - 5.5V DC
57.5 ±0.5mm
Original print + 1 copy
Special ribbon cartridge of black or purple
Approx. 3.6 lines/sec.
90 x 45.5 x 16mm
105g±10%
О ~ 50°C
-25 - 70°C
Specifications
Model DP-420 DP-430
Printingmethod
Printing direction
Printingspeed
Number of columns
Font
Number of wires
Character size (Wx H)
Characterpitch
Line spacing
Motor
Reset pulsesensor
Dot pulsesensor
Home position sensor
Paper out sensor
Black marksensor(option)
Printingsolenoid
Printingfeedsolenoid
Colorchangesolenoid
Connectingmethod
Paper feeding
Printing paper
Copy
Ink ribbon
Serial impact dot matrix
Bi-directional
Approx. 3.0 lines/sec.
42 columns, 189 dots/line
7x7 matrix 7x9 matrix
7 pins 9 pins
1.31 x 2.4mm 1.31 x 3.1mm
1.52mm
4.23 or 2.82mm(1/6 or1/9 inch)
Minimum 1.41mm (1/18 inch)
Voltage: 24V ±5%V DC/ Current: Peak Approx. 1A/
Average less than 0.2A
Photo interrupter
Photo interrupter
Photo interrupter
Photo interrupter
Photo interrupter
Voltage: 24V±5% V DC/ Resistance: 17П (25°C)
Voltage: 24V±5%V DC/ Resistance: 34£J (25CC)
Voltage: 24V±5%V DC/ Resistance: 3412 (25C)
FFC orFPC cable
Friction feed or sprocketfeed
Friction feed: 76 +0.5 x 083mm
Friction feed: original + 1 copy
Exclusive ink ribbon cartridge
Reliability MCBh 1
Accessories
Control board О CBM-909-4D
Interface
Number of columns
Font
• Command set
Buffer
CBM909-4D Supporting devices
Dimensions
Source voltage
Custom control chip
0 million lines
Parallel and serial
40
4x7 (including half dot)
Unique
2 color (Black/red), black or purple
Paper feeding speed Approx. 28 lines/sec.
Externaldimensions (Wx D x H)120x 90x 45mm
Weight Approx. 470g
Operating temp, range 0 ~ 50rC
Reliability Mechanism: MCBF 2.5 million lines
Head: 80 million characters
1 Accessories
LF switch. On-line switch
80x55. 5mm
909PC-4DU
Control chip О 909PC-4DU ^1^
^L^ "•~~-v
Paper winder О AW- 5 (not supported by свм-909) f^K^J*
4Hr
1 L (Lon9 life) ^*^^й»
Auto cutter О ACS-234
Cutting method Slidecutting
Paper width 50 — 89mm
thickness 0.06 — 0.15 mm
Max. cutting frequency 20 cuts mm
^^^^^ Voltage* 24V ±10%
^^^ BM| Current (peak) 0.8A
il^^^^^^taj/
Operating temperature 0 - 45°C
Size102x55.7x15 mm
Weight 180g
Reliability 500,000 cuts
Number oftab left
(F)ull cut blade type None
(P)artical cut blade type None or 1 tab
Paper winder О AW-2FA
Ink ribbon О IR ;ЛРШ^
^^^^y
Dot Impact Printer Mechanisms

Type Classification
DP-575L12A
©© ® ®
1 Type @ Printingdirection ijf1 Voltage
555: 24 columns L: Left to right 12: 12V
575: 40 columns R: Right to left 1 7: 1 7V
Paper
roll
3) Specialfeature
None: Regularmodel
A: Cassetteribbonmodel
58
mm
69
DP575
P-555/5
Compactdesign
Lightweight
•2 color printing
• 12V operation
1.25 X 2.75mm
1.5mm
Model
Printing method
Printing direction
Printing speed
Number of columns
Font
Charactersize (Wx H)
Characterpitch
Line spacing
Motor
Dot pulsesensor
Homeswitch
Printingsolenoid
Main solenoid
Colorchangesolenoid
Connecting method
Ink ribbon
Paper feedingspeed
Printingpaper
External dimensions (WD H)
Weight
Operating temp, range
Paper feedingtraction
Reliability
Accessories
Control board О СВМ-505 Control chip О 505РС-2А/2О
DP-555 DP-575
Serial dot impactmethod
L Series Left to right (Horizontalj.R Series Right to left (Horizontal)
Approx. 1.9 lines/sec.Approx. 1.2 lines/sec
24 columns 40 columns
5x7 matrix
1.7X 2.75mm
2mm
5.5mm
Voltage: 12V±1 V DC/ Peak current: Approx. 2.5A(12V, 25C)
Average current: Approx. 0.25A
Photo interrupter
Voltage: 5VDC -20V DC/ Current: ЮОцА - 3mA (Resistance load)
Voltage: 12V±1V DC/ Resistance: 4.910.5П (25°C)
Energized time: 2 dot pulses (700±50uS) / Peak current: Approx. 2A
Voltage: 12V+1V DC/ Resistance: 18.4+1П (25C)
Energized time: 16ms±10% (Max. of5 continuous seconds)
Voltage: 12V+1V DC/ Resistance: 18.4+1Q (25C)
Energized time: 20±2ms(Max. of5 continuous seconds)
Flexible cable (SMCD 18x 91 ES10)
Color 2 colors(Red and black),black or purple
Spool diameter: 30mm or 35mm, width: 13mm
Approx. 8 lines/sec.
57.5 ± 0.5mm
Approx. 450g
О ~ 50°C
Morethan100g {Citizen recommendedpaper)
Printer mechanism MCBF: 1.5 million lines Dot head 50 million characters
PC-2A/20
Interface
Number of columns
Font
Command set
Firmware location
Buffer
Dimensions
Source voltage
Custom control chip
Parallel, RS 232C, Currentloop orTTL
DP-555: 24. DP-575: 40
5x7 dots
CBM standard
Masked CPU
1 line
135x95mm(PF), 155x119mm (RF),
5V±5% and 13V±1.0V
PC-2A/20
Autocutter О AC-3/3F
AC -3/3 F
Cutting method
Paper width
thickness
Max. cuttingfrequency
Voltage*
Current (peak)
Operating temperature
Size
Weight
Reliability
Number oftab left
(F)ull cut bladetype
(P)artical cut bladetype
Guillotine
76±0.5 mm
0.06 - 0.085 mi
20 cuts/mm
12V±10%
1.2A
0 40°C
93x74x25 mm
200g
300.000 cuts
None or1 tab
2 or3 tabs
Paper winder О NW-58 (DP-sss)
О NW-69 (DP 575)
Ink ribbon О IR-01
"For some models, other voltages are also available.
13 Dot ImpactPrinterMechanisms

Type Classification
DP-614DFCV
®(2)(3) v4) (5)
©Type
610: 23 columns
612: 28 columns
614: 40 columns(360dots)
617: 40 columns(400dots)
©Ribbon
D: 2 color
M: 1 color
(3) Paperfeedingmethod
F: Frictionfeeding
P: Sprocketfeeding
\4) Character / Graphic
C: Characteronly
G: Graphic
© Validationsensor
None: No validation
V: Equipped
Specifications
Model
Printingmethod
Printingdirection
Printingspeed
Number of columns
Font
Charactersize (Wx H)
Line spacing
Motor
Dot pulsesensor
Homepositionsensor
Paperfeedingmotor
Printing solenoid
Color changesolenoid
Connectorterminals
DP-610 DP-612 DP-614 DP-617
Approx. 3.5 lines/sec.Approx. 3.0 lines/sec.Approx. 2.4 lines/sec.
28 columns, 280 dots/line 40 columns, 360 dots/line 40 columns, 400 dots/line
1.5 x 2.4mm1.36 X 2.4mm 1.2 x 2.4mm
Paper feeding
Printingpaper
Copy
Paper feedpower
Ink ribbon
Paperfeedingspeed
External dimensions (Wx D x H)
Weight
Operating temp, range
Reliability
Serial dot impactmethod
Bi-directional
Approx. 4.0 lines/sec.
23 columns, 230 dots/line
7x9 matrix
1.8 x 2.4mm
1/6 inch
Voltage: 24VDC \ V DC/ Peak current:Max. 21A (12V, 25°C) / Average current: Approx.0.2A or less
Photo interrupter
Photo interrupter
Voltage: 24V DC IV DC/ Resistance: 48£2 (25°C)/ Driving pulse width: 30DP, Approx.20ms
Voltage: 24V ±1V DC/ Resistance: Mil (24V DC, 25°C)
Voltage: 24V DC IV DC / Resistance: 48i2 (24V DC,25C)
Connector 1 (S16B-PH-K-S (16P): Counterpart PHR-16 (16P)manufactured by JST)
Connector 2 (S10B-PH-K-SC (10P):Counterpart PHR-10 (10P)manufactured by JST)
Friction feed or sprocketfeed
Frictionfeed:76mmRollpaper x 083mm / Sprocketfeed: 76 ~ 89mmfanfoldpaper
Friction feed: original + 1 copy/ Sprocketfeed: original + 2 copies
More than 100g(Citizenrecommendedpaper)
Two colors(Red and black) / Singlecolor(Black or purple)
Approx. 25 lines/sec.Approx. 21 lines/sec.Approx. 18 lines/sec.
Two colors: 137x 136x 63.5mm / Singlecolor: 134x 136x 63.5mm
Approx.690g
0-50 С
Printer: MCBF 4.0 million lines / Head: 80 million characters
rox. 15 lines/sec.
Accessories
Control board Q CBM-606
Interface
Number of columns
Я^^ЬЯ*Й^№
Font
Command set
Firmware location
Buffer
Supporting devices
CBM-606
Dimensions
Source voltage
Parallel, RS-232C,
Current loop or RS-422
DP-610: 23
DP-612: 28
DP-614: 40
DP617: 40
7x7 dots(includinghalfdot)
CBM standard
EPROM
7k bytes or2 lines
Auto cutter. Auto winder,
Paper end sensor,
LED's (Power/Error/On-line},
Switches (LF/One-line)
114x152mm
5.0±5% and 24±1.0V
Auto cutter
Cutting method
Paper widtb
thickness
Max.cuttingfrequency
Voltage*
Current(peak)
Operating temperature
Size
Weight
Reliability
Number oftab left
(F)ull cut bladetype
(P)artical cut bladetype
О AC-2/2F
Guillotine
76±0.5 mm
0.06-0.085 mm
20 cuts min
24V +10%
0.8A
0 - 40°C
99x74x30 mm
200g
300,000 cuts
None or1 tab
2 or3 tabs
,-— ^>
<v™%
^
О АС-134
Guillotine
50 -89mm
0.06-0.09 mm
20 cuts min
24V ±10%
0.8A
0 - 45°C
120x57x15 mm
160g
300,000 cuts
None or1 tab
2 or3 tabs
О ACS-236
Slide cutting
50 -89mm
0.06-0.15 mm
20 cuts min
24V ±10%
0.8A
0-45°C
102x55.7x15 mm
180g
500.000 cuts
None
None or1 tab
." .' ..
Paper winder О AW-2FA
Ink ribbon О IR-61
-.»
AC 134
"For some models, other voltages are also available.
Dot ImpactPrinterMechanisms 14

Type Classification
DP-654 D F С V
ф © ® (4) (5)
фТуре ® Ribbon
654: 40 columns(360dots) D:2 color
657: 40 columns (400dots) M: 1 color
(3) Paperfeedingmethod
F: Frictionfeeding
P: Sprocketfeeding
(4, Paperpath
C: Characteronly
G: Graphic
,5) Paperpressure
None: No validation
V: Equipped
DP-654/657
Features
• High-speed printing
• High reliability
•2 color printing (black/red)
• Number of columns:
DP-654 40 columns(360dots)
DP-657 40 columns(400dots)
Paper
roll [
76
Ftype
SprocketJ
76-
«q:
O*7
B
•
Ptype
• 24V operation
• Sprocketfeedingmodel (P type)
• Graphic model (G type)
Specifications
Model
Printing method
Printing direction
Printing speed
Number of columns
Font
Character size (Wx H)
Line spacing
Motor
Reset pulse sensor
Dot pulse sensor
Home positionsensor
Printing solenoid
Paper feedingsolenoid
Connector terminals
DP-654
Serial impact dot matrix
Bi-directional
3.6 IPS ±10%
40 columns, 360 dots/line
7 x 7 or7 x 9 (half-dot)
1.36 x 2.4mm
1/6 inch
DP-657
3.0 IPS ±10%
40 columns, 400 dots/line
1.2 x 2.4mm
1/9 inch (DR617DFG)
Connecting method
Paper feeding
Ink ribbon
Paper feeding speed
Printing paper
External dimensions (Wx
Weight
Operating temp, range
Storage temp, range
Reliability
DxH)
Voltage: 24V *JV DC/ Peak current:Approx. 1.5A/Average less than0.3A
Mechanicalleafswitch
Photo interrupter
Photo interrupter
Voltage: 24V+1V DC/ Resistance: 17Q (24V DC, 25°C)
Voltage: 24V IDC Resistance: ЗЗП+10%
Connector 1 (S16B-PH-K-S (16P):Counterpart PHR-16 (16P)manufactured by JST)
Connector 2 (S10B-PH-K-SC (8P):Counterpart PHR-10 (8P)manufactured by JST)
Pin connector
Frictionfeeding or sprocketfeeding
Dedicated ink ribboncartridge (Red/Black or singlecolor Black)
18 lines/sec.
Receipt and journal 37~ 38mm,Outer dia Max.083mm
137 x 138x 63.5mm
Approx.690g
0 - 50°C
-25 - 70°C
Mechanism:MCBF 4.0 million lines / Head: 80 million characters
Accessories
Paper winder О AW-2FA
Ink ribbon О IR-61>^^^^b
^
Auto cutter
Cutting method
Paper width
thickness
Max. cutting frequency
Voltage*
Current (peak)
Operating temperature
Size
Weight
Reliability
Number oftab left
(F)ull cut blade type
(P)artical cut blade type
О AC-2/2F
Guillotine
76±0.5 mmMa
0.06 0.085 mm
20 cuts rnin
24V ±10%
0.8A
0 40°C
99x74x30 mm
200g
300,000 cuts
None or1 tab
2 or 3 tabs
О АС-134
Guillotine
50 -89mm
0.060.09 mm
20 cuts mm
24V ±10%
0.8A
0 - 45"C
120x57x15 mm
160g
300,000 cuts
None or1 tab
2 or3 tabs
О ACS-236
Slide cutting
50 - 89mm
0.06 -0.15 mm
20 cuts 'min
24V ±10%
0.8A
0-45°C
102x55.7x15 mm
180g
500,000 cuts
None
None or1 tab
( 15 ) Dot ImpactPrinterMechanisms
*For somemodels, other voltages are alsoavailable.

Type Classification
DP-624MPCS
© ®@®(D
©Type
622: 28 columns
624: 40 columns(360 dots)
627: 40 columns(400dots)
@ Ribbon (3) Paper feedingmethod
M: 1 color F: Frictionfeeding
P: Sprocketfeeding
® Copy capability
None:standard
C:4 copies
(5) Auto loading sensor
None: No sensor
S: withsensor
Specification
Model
DP-622 DP-624
DP-627
Printingmethod
Printing direction
Printing speed
Number of columns
Font
Character size (Wx H)
Line spacing
Motor
Dot pulsesensor
Home positionsensor
Paper feedingmotor
Serial dot impactmethod
Bi-directional
Approx. 4.2 lines/sec.
28 columns, 280 dots/line
7x9 matrix
1.5x2.4mm
Approx. 3.6 lines/sec.
40 columns, 360 dots/line
1.36 x 2.4mm
I Approx. 3.0 lines/sec.
40 columns, 400 dots/line
1.2 x 2.4mm
Printingsolenoid
Connector terminals
Paper feeding
Printingpaper
Copy
Paper feeding power
Ink ribbon
Paper feedingspeed
External dimensions (Wx D x H)
Weight
Operating temp, range
Reliability
Min.1/144inch
Voltage: 24V DC'JV DC/ Peakcurrent:Max.1.5A
Average current:Approx. 0.3A or less
Photo interrupter
Photo interrupter
4 shase 48 polespermanentmagnettypesteppingmotor
24VDC ±10%(Drivevoltage) / 5VDC ±15%(Holdvoltage)
Meancurrent:Approx. 300mA/ Holdcurrent: Approx. 150mA
Voltage: 24 ±1V DC/ Resistance: 17Q (24V DC, 25°C)
Connector 1 (53156-1710(17P):Counter part 51049-1700(17P)manufactured by Molex)
Connector 2 (53015-0610 (6P): Counter part 51004-0600(6P)manufactured by Molex)
Connector 3 (51004-0600(6P):Counterpart57014-0610(6P)manufactured by Molex)
Friction feeding or sprocketfeeding
Frictionfeeding:76mm roll paper x 083mm / Sprocketfeeding: 76- 89mmfanfoldpaper
Frictionfeeding: original + 1 copy / Sprocketfeeding:original + 2 copies
Morethan100g(Citizenrecommendedpaper)
Single color(Black or purple)
Approx. 25 lines/sec.
140.9 x 153.2 x 63.5mm
Approx.730g
0 - 50°C
Printer:MCBF 5.0 million lines / Head: 80 million characters
Accessories
Control board О CBM-626PF (Parallel interface)/RF (Serial interface) Auto cutter О AC-134/134F
Interface
Number of columns
я^^пвееэЕ^в
Font
Command set
^P^* Firmwarelocation
Supporting devices
CBM-626
Dimensions
Source voltage
Parallel, RS-232C, Cuttingmethod
Current loop Paper width
thickness
Max.cuttingfrequency
DP-627: 40 ^^Ц^^^ Voltage*
x7 dots (including half dot) ,<<^^ B^ Current(peak)
CBM standard
ь-~2|^1^_
Operatingtemperature
EPROM size
3k bytes or2 lines AC-134/134F Weight
Auto cutter, Auto winder. Reliability
Paper end sensor,
LED's (Power/Error/On-line),
Switches (LF/One-line)
114x152mm
5.0±5%and 24±1.0V
Paper winder О AW-2FA
Ink Ribbon О IR-61 ^^^^^^
^^
Number oftab left
(F)ull cut bladetype
(P)artical cut bladetype
Guillotine
50- 89mm
0.06-0.09 mm
20 cuts/min
24V ±10%
0.8A
0 - 40°C
102x57x15 mm
160g
300,000 cuts
None or1 tab
2 or3 tabs
'For some models,othervoltages are alsoavailable.
Dot ImpactPrinterMechanisms f 16j

t Impact Pr
Type Classification
® Validation sensor
ПР filfl U Q P
V
Equipped
Ur-UJU V-0 U
None: No
validation
©Stamp
S: Equipped
None: No stamp
® Cutter
C: Equipped
None: No cutter
DP-730FRCB
©@(D
® Validationsensor
R:No validationsensor
M: Multi-line validation sensor
P: 1 line L7R sensor
None: 1 linerightsensor
© Cutter
C: Equipped
None: No cutter
(3) Stamp/Winder
None: No stamp/winder
B: Bothequipped
S: Stamponly
W: Winderonly
Paper
P-730/7
Paper
roll
Paper
roll
45 45
mm
atures
Specification
Model
Printing method
Printingdirection
Font
Number of columns (validation)
Number of total dot/line (half dot)
Number of wires
Printing speed
Character size (Wx H)
Line spacing
Character pitch
Ink ribbon
DP-630
Motor
Reset pulse sensor
Dot pulse sensor
Home positionsensor
Printing solenoid
Paper feeding solenoid
Connecting method
Paper feeding
Printingpaper
Receipt and journal
Paper feeding speed
External dimensions (Wx D x H)
Weight
Operating temp, range
Storage temp, range
Reliability Mechanism
Head
Serial impact dot matrix
Bi-directional
7x9 matrix
18 columns x 2 (40 columns)
180 (360) dots
9 pins(dotpitch0.353mm)
Approx. 3.0 lines/sec.
1.36 x 2.4mm
5.08mm
Character = 1.59mm
Exclusive ink ribboncartridge
(single color,black or purple) IR-61
Voltage: 24V+1/-2V DC
Current: Peak Approx. 1A
Average less than0.2A
Mechanical leafswitch
Photo interrupter
Photo interrupter
Voltage: 24V+1VDC
Resistance: 1712
Voltage: 24V+1/-2V DC
Resistance: 3212+10%
Pin connector
Frictionfeed
37-38mm
Outer dia Max.083mm
18 lines/sec.
134 x 136 x 63.5mm
Approx. 690g
О - 50°C
-25 ~ 70°C
MCBF 2.5 million lines
50 million characters
Specification
Mode)
Printing method
Printing direction
Font
Number of columns (validation)
Number of total dot/line (halfdot)
Number of wires
Printing speed
Character size (Wx H)
Line spacing
Characterpitch
Ink ribbon
Ultracompactdesign
2 stationprintermechanism
(Receipt and journal)
Validationprinting(option)
J3P-730 DP-740
Serial impact dot matrix
Bi-directional
7x9 matrix 24x24 (half dot)
24 columns x 2 (55 columns) 10 columns X 2 (23 columns)
248 (495) dots 310 (620) dots
24 pins
3.44 x 3.44mm
Motor
Reset pulse sensor
Dot pulse sensor
Home positionsensor
Printing solenoid
Paper feeding solenoid
Connecting method
Paper feeding
Printing paper
Receipt and journal
Validation
Paper feeding speed
External dimensions (Wx D x H)
Weight
Operating temp, range
Storage temp, range
Reliability Mechanism
Head
9 pins (dotpitch 0.353mm)
Approx. 3.0 lines/sec.
1.36 x 2.4mm or 1.36 x3.1mi
4.23mm(1/6inch)
Character = 1.59mm3.67mm
Exclusive ink ribboncartridge
(single color,black or purple) IR-71
Voltage: 24V ±10% / Current: Peak Approx. 2.5A
Average less than 0.45A
Mechanicalleafswitch
Photo interrupter
с
Photo interrupter
Voltage: 24V±10% / Resistance: 10.5£hh10%
Voltage: 24V ±10%
Resistance: 34£2±10%
Pin connector
Frictionfeed
44.5±0.5mm
Outer dia Max.083mm
135-210 (W)x 70 (H)mm
30 lines/sec.
151 x 234.6 x 123.7mm
Approx. 1,250g
0 - 50°C
-25 - 70°C
MCBF 4 million lines
100 million characters
Options
• Validation sensor • Autocutter • Paperwinder
• Paper near end sensor • Mark sensor • Stamp
Accessories
Pdper winder О PW-2
Ink Ribbon О IR-61
Options
• Validationsensor • Autocutter • Paperwinder
• Papernear end sensor • Marksensor • Stamp
Accessories
Ink Ribbon О IR-71
17 Dot Impact Printer Mechanisms

Accessories / Option
*+ Control Boards
BD2-1220/1221 BD2-2860 BD2-2880 BD2-3880/3890 СВМ-505 СВМ-606 СВМ-626 СВМ-909
Parallel and RS-232C Parallel and RS-232C
LT-1220/1221: 32/42
17-1320/1321:48/64
Font
Command set
Bar-code
Firmware location
Buffer
Font A: 32
Font B:42
Parallel, RS-232C,
Current loop orTTL
pP-6110/612/614/611 D P-6 2 2/6 24/627
Parallel, RS-232C,
Current loop
or RS-422
Parallel, RS-232C,
Current loop
MD-910/911
Parallel and serial
Font A:32
Font B: 42
Font A: 12x24 dots , Font A: 12x24 dots
Font B: 9x24 dotsFont B: 9x24 dots
ESC/PpS
Suppoted
Supporting devices
Flash memory
4k bytes
Auto cutter
Paper sensor
Head-upsensor
LF switch
Error LED
Paper outLED_
Dimensions (WxD) 90x65mm
Source voltage 5.0±5% and 24V±5%
Custom control chip
Gate array
ESC POS
Suppoted
Masked CPU
2k bytes
Auto cutter
Paper sensor
Head-upsensor
LF switch
Error LED
Paper out LED
Font A: 12x24 dots
Font B: 9x24 dots
ESC/POS_
80x80mm
5.0±5%
202PC-04
202LA-00
Suppoted
Flash memory
2k bytes
Auto cutter
Pa per sensor
Head-upsensor
LF switch
Error LED
Paper outLED
80x75mm
Font A:48
Font B: 64
ontA: 12x24 dots
ontB: 9x24 dots
ESC/POS
Suppoted
Flash memory
2k bytes
Auto cutter
Paper sensor
Head-upsensor
LF switch
Error LED
Pa peroutLED
DP-555: 24
DP-575: 40
5x7 dots
CBM standard
-
Masked CPU
1 line " _
14"wQ4mm /Pf\
DP-610: 23
DP-612: 28
DP-614: 40
DP-617: 40
7x7 dots
(including halfdot)
CBM standard
i—
i EPROM
J 7 К bytes or2 lines
Auto cutter
Auto cutter
Paper end sensor
LED's (Power/Error/
On-line)
Switches (LF/On-line)
DP-622:28
DP-624: 40
DP-627: 40
7x7 dots
(including half dot)
CBM standard
-
EPROM
3K bytes or2 lines
Auto cutter
Auto cutter
Paper end sensor
LED's(Power Error/
On-line)
Switches (LF/On-line)
MD-910:24
MD-911:40
MD-910:5x7
MD-911:4x7
(including half dot)
Unique
-
Masked CPU
1 line
LF switch
On-line switch
5.0±5%
202LA-00
90x80mm
5.0±5%
0x55.5mm
5V±5J and 13±1.0V 5.0±5% and 2411.0V 5.0±5% and 24+1.0V
PC-2A 20
202LA-00
4.0+0.7/-1.0V
909PC-2D 4D
»* Control Chips/Gate Array
Type
Control chipControlchipControlchipControlchipControlchip
909PC-2DU
909PC-4DU
Controlchip
Accessories/Options (18

Accessories / Options
>*• Cutters
ACS-220 ACS-230
Cutting method
Paper width
thickness
Max.cuttingfrequency
Voltage*
Current (peak)
Operatingtemperature
Size
Weight
Reliability
Number oftab left
(F}ull cut bladetype
(P)artical cut blade type
Applicablemechanism
(Cuttermodelname with
mountingbracket and
paperguide)
^r3
Guillotine
38 -69 mm
0.06 -0.09 mm
20 cuts/min
24V ±10%
0.8A
0-45°C
80x57 x 15mm
130g
300,000 cuts
None or1 tab
2 or Stabs
LT-1220(AC-125)
""^Ч
^
Guillotine
50-89 mm
0.06-0.09 mm
20 cuts/min
24V ±10%
0.8A
0-45°C
102x57x 15mm
160g
300,000 cuts
None or 1 tab
2 or3 tabs
DP-6xx(AC-134)
LT-1320(AC-135)
^
Slide cutting
45-69 mm
0.06 -0.15mm
20 cuts/min
24V ±10%
0.8A
0 - 45°C
80X 55.7 X 15mm
140g
500,000 cuts
None
None or1 tab
LT-286 (ACS-224) 5V
LT-1220 (ACS-225)
MLT-288 (ACS-228) 5V
LT-281 (ACS-229)
^5555*/
Slide cutting
50-89 mm
0.06-0.15 mm
20 cuts/min
24V ±10%
0.8A
0 - 45°C
102 x 55. 7 X 15mm
180g
500,000 cuts
None
None or1 tab
DP-400 (ACS-234)
DP410 (ACS-234)
LT-1320(ACS-235)
DP-600 (ACS-236)
MLT-388 (ACS-238) 5V
'***
Slide cutting
55 - 115 mm
0.06 -0.13mm
20 cuts/min
24V ±10%
0.8A
0-45°C
130X 55.7 x 15mm
220g
300,000 cuts
None
None or1 tab
LT481 (ASC-249)
Cutting method
Paper width
thickness
Max. cutting frequency
Voltage*
Current(peak)
Operatingtemperature
Size
Weight
Reliability
Number oftab left
(F)ull cut blade type
(P)artical cut bladetype
Applicablemechanism
(Cuttermodelname with
<*%
fc^li-
\<^
Guillotine
76 ±0.5 mm
0.06 -0.085 mm
20 cuts/min
24V ±10%
0.8A
0 - 40°C
99x74x30 mm'
200g
300,000 cuts
None or1 tab
2 or3 tabs
*~j,*t
;? /;*-
-*\
Guillotine
76 ±0.5 mm
0.06-0.085 mm
20 cuts/min
12V±10%
1.2A
0 - 40°C
93 x 74x 25mm
200g
300,000 cuts
None or1 tab
2 or3 tabs
^
Guillotine
49. 5 ±0.5 mm
0.063 mm
6 cuts/min
24V ±10%
1.3A
5-40°C
60x55x 23mm
260g
300,000 cuts
None or1 tab
Several tabs
г%Г/г^
-4^Y-
^
Guillotine
59. 5 ±0.5 mm
0.065 mm
6 cuts/min
24V ±10%
1 ЗА
5-40°C
70x55x31.7 mm
160g
300,000 cuts
None or1 tab
Several tabs
^^ '
Guillotine
111. 5 ±0.5 mm
0.065 mm
6 cuts/min
24V ±10%
1A
5 - 40°C
130x55x21.5 mm
260g
300,000 cuts
None or1 tab
Several tabs
•**>
^^
Rotary
59.5+0.5 mm
0.15 mm
10 cuts/min
24V ±10%
1.3A
5 - 40°C
96.5x85.5x40 mm
150g
500,000 cuts
None or1tab
Several tabs
mounting bracket and
paper guide)
DP61X(AC-2) DP-5XX(AC-3)
LT-483 (AC-4) LT-281 (AC-5)
LT-481 (AC-6) LT-281 (AC-7)
*For some models, other voltages are also available.
19) Accessories / Options