Citizen 6P27 User manual

FEATURES : ANALOG MULTI-FUNCTION QUARTZ WATCH WITH DAY, DATE AND 24HOUR
A) DISPLAY
B) OPERATION PROCEDURE
C) SETTING THE DAY AND TIME (HOUR, 24 HOUR, MINUTE, SECOND)
D) SETTING THE DATE (BY QUICK OPERATION)
A) DISPLAY
B) OPERATION PROCEDURE
1 SETTING THE DAY
SETTING THE TIME (HOUR, 24HOUR, MINUTE and SECOND)
2 SETTING THE DATE
Cal. 6P27 Instruction manual
24HOUR HAND
DATE
DAY ( OF THE WEEK )
HOUR HAND
SECOND HAND
MINUTE HAND
NORMAL CROWN POSITION
1ST POSITION
2ND POSITION
NORMAL CROWN POSITION
1ST POSITION
2ND POSITION
QUICK OPERATION - DATE (COUNTERCLOCKWISE)
TIME/DAY SETTING (CLOCKWISE)
1 / 3

C) SETTING THE DAY AND TIME (HOUR, 24 HOUR, MINUTE AND SECOND)
The hour, 24 hour, minute, second and day are set by the same operation.
SETTING PROCEDURE
C-1) SETTING THE DAY
Pull the crown out to the 2nd position to stop the second hand at 0 (12 o'clock).
Turn the hour/minute hands in a clockwise direction to set a day
In order to set the day, you must advance the hour hand by 24 hours per day.
NOTE:
* If the day is set by turning the crown counterclockwise, there is the possibility the
date will not change over.
Do not set the day by turning the crown in counterclockwise direction.
* The day changes somewhere between 0:00a.m. and 5:30a.m. or a little later.
C-2) SETTING THE TIME
After setting the day, set the hour (and 24hour) and minute hands.
Turn the hour/minute hands in a clockwise direction to set the time.
To ensure time is set accurately, first turn the minute hand 5 minutes ahead of desired
time and then turn back (in a counterclockwise) to the desired time.
After setting the time, use a time signal to synchronize the watch by pushing crown to
the normal position to start the second hand going.
NOTE: Make sure you have correctly set AM/PM before setting the time.
When the day changes over, it is a.m..
(Day changes over between 0:00a.m. and 5:30a.m. or little later)
Check am./p.m. by the 24hour hand.
HOUR
&24HOUR MINUTE SECONDDAY
2 / 3

D) SETTING THE DATE (BY QUICK OPERATION)
Pull the crown out to the 1st position. Turn the crown counterclockwise to set
the date quickly.
NOTE:
* Do not set the date between the hours 9:00p.m. and 0:30a.m..The date may not change
correctly the next day.
These specifications might be changed without prior notice.
3 / 3