Citizen C470 User manual

C470/C471 Abbreviated instruction
• To see details of specifications and operations, refer to the instruction manual: C470/C471 instruction manual
English
Component identification
Button
B
Button
A
Button
M
Hour hand
Mode indication
Second hand
Minute hand
Crown
Digital display
• Actual appearance may differ from the illustration.
Using EL lights
The EL lights are turned on when you press button
A
while the crown is pushed
in and the mode is [TME], [CAL] or [SET].
Setting the time
Setting the time of the analog section
1.
Pull out the crown when the second hand points 0 second.
The second hand stops.
2.
Rotate the crown to set the time.
• Move the hands 4 or 5 minutes forward and move them back to the right
time to set the time more precisely.
3.
Push in the crown in accordance with a reliable time source to
finish the procedure.
The second hand starts moving.
Setting the time of the digital section
• Press button
M
to cancel setting of the time of the digital section.
• The setting is automatically canceled in about 2 minutes without any operation
during the setting.
1.
Press and release the upper left button Mrepeatedly to change
the mode to [TME].
2.
Press and release the lower left button Brepeatedly to
indicate an area name you want on the digital display.
• For area names, refer to the table on “Using the world time”.
• Pressing and releasing button
A
while Pressing and holding button
B
also
change the area name indication.
3.
Press and hold the lower left button Bfor about 1 second.
[S.T.] and [ON] or [OF] (off) starts blinking and the time becomes adjustable.
• The blinking part is the target to adjust.
4.
Press and release the lower left button Brepeatedly to change
the target to be set.
• Each time you press button
B
, the target changes as follows:
Summer time Second
MinuteHour12/24-hour basis
Normal time
indication
5.
Press and release the lower right button Ato adjust the target.
• Press button
A
in accordance with a reliable time source when setting the
second.
• Pressing and holding button
A
changes indication continuously when
setting the minute and the hour.
• “A” or “P” is displayed to indicate AM or PM in 12-hour basis indication.
6.
Repeat steps 4 and 5 to set other targets.
7.
Press and release the upper left button Mto finish the
procedure.

C470/C471 Abbreviated instruction
Using the world time
1.
Press and release the upper left button Mrepeatedly to change
the mode to [TME].
• Choose [CAL] to see calendar.
2.
Press and release the lower left button Brepeatedly to choose
an area name on the digital display.
The time or calendar of the chosen area is indicated on the digital display.
• Pressing and releasing button
A
while Pressing and holding button
B
also
change the area name indication.
Table of time zones and representative areas
• The time zone in the table is based on UTC (Coordinated Universal Time).
• Countries or regions may change time zones for various reasons.
Time
zone Area name Representative area
0UTC
Coordinated Universal
Time
LON
London
+1 PAR
Paris
ROM
Rome
+2 CAI
Cairo
IST
Istanbul
+3 MOW
Moscow
KWI
Kuwait
+4 DXB
Dubai
+5 KHI
Karachi
+5.5 DEL
New Delhi
+6 DAC
Dhaka
+7 BKK
Bangkok
+8
SIN
Singapore
HKG
Hong Kong
BJS
Beijing
Time
zone Area name Representative area
+9 TYO
Tokyo
+10 SYD
Sydney
+11 NOU
Noumea
+12 AKL
Auckland
–10 HNL
Honolulu
–9 ANC
Anchorage
–8 LAX
Los Angeles
–7 DEN
Denver
–6 CHI
Chicago
MEX
Mexico City
–5 NYC
New York
YMQ
Montreal
–4 CCS
Caracas
–3 RIO
Rio de Janeiro
BUE
Buenos Aires
Setting the calendar
The calendar of this watch does not have to be adjusted manually until Thursday,
December 31, 2099 including leap years. (perpetual calendar)
• Press button
M
to cancel setting of the calendar.
• The setting is automatically canceled in about 2 minutes without any operation
during the setting.
1.
Press and release the upper left button Mrepeatedly to change
the mode to [CAL].
2.
Press and release the lower left button Brepeatedly to
indicate an area name you want on the digital display.
• For area names, refer to the table on “Using the world time”.
• Pressing and releasing button
A
while Pressing and holding button
B
also
change the area name indication.
3.
Press and hold the lower left button Bfor about 1 second.
The month indication starts blinking and the calendar becomes adjustable.
• The blinking part is the target to adjust.
4.
Press and release the lower left button Brepeatedly to change
the target to be set.
• Each time you press button
B
, the target changes as follows:
Normal calendar
indication Month
Year Date
5.
Press and release the lower right button Ato adjust the target.
• Pressing and holding button
A
changes indication continuously.
6.
Repeat steps 4 and 5 to set other targets.
7.
Press and release the upper left button Mto finish the
procedure.
• The day of week is set automatically.

C470/C471 Abbreviated instruction
Using the zone-set function
You can hide unnecessary ones in the 30 areas and UTC, which the watch can
indicate the time of; you can also activate/deactivate summer time for those areas
separately.
• Press button
M
to cancel setting.
• The setting is automatically canceled in about 2 minutes without any operation
during the setting.
1.
Press and release the upper left button Mrepeatedly to change
the mode to [SET].
2.
Press and release the lower left button Brepeatedly to choose
an area name on the digital display.
• Pressing and releasing button
A
while Pressing and holding button
B
also
change the area name indication.
3.
Press and hold the lower left button Bfor about 1 second.
“ON” or “OF” and the area name starts blinking and display/hide of the area
becomes adjustable.
4.
Press and release the lower right button Ato select “ON”
(display) or“OF”(hide) of the area.
5.
Press and release the lower left button B.
“ON” or “OF” and “S.T.” (summer time) starts blinking and the summer time
setting becomes adjustable.
6.
Press and release the lower right button Ato set the summer
time.
7.
Repeat steps 2 to 6 to set other areas.
8.
Press and release the upper left button Mto finish the
procedure.
Resetting the watch — All Reset
1.
Pull out the crown.
2.
Press and release buttons A, Band Mat the same time.
All the digital indication lights up.
3.
Push in the crown.
The alarm sounds and the digital indication is turned off.
After All Reset
After All Reset, set the time and calendar and other settings. Set also the alarm.