Citizen H060 User manual

INSTRUCTION MANUAL

ENGLISH
FRANÇAIS
ESPAÑOL
DEUTSCH
ITALIANO
PORTUGUÊS
中文（繁体字）
中文（簡体字）

1
Thank you for your purchase of this Citizen watch.
Before using the watch, read this instruction manual carefully to ensure correct use.
After reading the manual, store it in a safe place for future reference.
Visit the Citizen website (http://www.citizenwatch-global.com/) to view visual guides
for operation of your watch. Some models may be equipped with external features
(calculation scale, tachymeter, etc.). Visual guides for operation of such external
features can also be found on the website.
To check the movement number
A case number—4 alphanumeric characters and 6 or
more alphanumeric characters—is engraved on the
case back. (Figure on the right)
The first 4 characters of the case number represent
the movement number of the watch.
In the example on the right, “ ” is the
movement number.
Engraving position example
The engraving position may differ
depending on watch model.

2
Safety precautions — IMPORTANT
This manual may contain certain safety advisories. Your watch should be used in
accordance with these advisories at all times to ensure optimal enjoyment of your
watch and to prevent injury to yourself, other persons and/or damage to property.
Understand the meaning of the following symbols and read pages from 56 to 67.
■ Safety advisories are categorized and depicted in this manual as follows:
DANGER Highly likely to cause death or serious injury
WARNING Can cause serious injury or death
CAUTION Can or will cause minor or moderate injury or damage
■ Important instructions are categorized and depicted in this manual as follows:
Warning (caution) symbol followed by instructions that should be
followed or precautions that should be observed.
Warning (caution) symbol followed by prohibited matters.

3
Before using this watch
The following must be done before using the watch:
●Checking the power reserve ➞Page 16
Check the charge level of the watch.
●Setting the World Time ➞Page 18
Select the city or time difference for which you want to indicate the time and date.
●Checking the time signal reception ➞Page 17
Check the result of the time signal reception.
This watch has a rechargeable cell which is charged by
exposing the dial to light.
Expose the dial to direct sunlight regularly to charge the watch.
For details of charging, see pages 9to 15.

4
Band adjustment
We recommend seeking the assistance of an experienced watch technician for sizing
of your watch. If adjustment is not done correctly, the bracelet may unexpectedly
become detached leading to loss of your watch or injury.
Consult your nearest an authorized service center.
Protective stickers
Be sure to remove any stickers covering the metal parts (back cover, band, clasp) or
glass of the watch before use. Otherwise, perspiration or moisture may enter the gaps
between the protective stickers and the parts, which may result in a skin rash and/or
corrosion of the metal parts.
How to use a specially designed crown/push button
Some models are equipped with a specially designed crown and/or push button to
prevent accidental operation.
Before using this watch Before using this watch

5
Screw down crown and screw down push button
Unlock the crown prior to operate your watch.
Unlock Lock
Screw down
crown
Rotate the crown
counterclockwise until it
releases from the case.
Push the crown in to the case.
With gentle pressure towards the
case, rotate the crown clockwise
to secure it to the case. Be sure
to tighten firmly.
Screw
down push
button
Rotate the locking screw
counterclockwise, and
loosen until it stops.
Rotate the locking screw
clockwise, and tighten firmly.
Recessed buttons
Press the button with a narrow-tipped object such as a
wooden toothpick.
• Metal objects may cause marring or scratching of
the button.
Before using this watch Before using this watch

6
Table of contents
Component identification..........8
Recharging your watch..............9
Checking the power reserve.....16
Checking the time signal
reception ..............................17
Setting the World Time............18
Notes on the time signal
reception ..............................26
Receiving the time signal manually
(On demand reception)..........34
Switching Summer Time and
standard time .......................36

7
Adjusting the time/calendar
manually...............................42
Checking and correcting the
current reference position .....46
Troubleshooting......................50
Resetting the watch—
All Reset................................54
Eco-Drive watch handling
precautions...........................56
Water resistance .....................58
Precautionary items and usage
limitations ............................61
Specifications..........................68

8
NO
ON
OFF
RX
OK
-
7
-
9
-
1
1
+
1
2
+
1
1
+
9
+
7
-
5
-
3
-
1
O
+
1
+
3
+
5
7
Component identification
The illustrations in this instruction manual may differ from the actual appearance of
your watch.
Hour hand
Second hand
Minute hand
Lower right button ( )
Date indicator
City or time difference
Signal reception indication
• OK/NO: Reception result
• RX: Reception in progress
Summer Time indication
(ON/OFF) Crown position
Crown

9
Recharging your watch
This watch has a rechargeable cell which is charged by
exposing the dial to light, such as direct sunlight or
fluorescent lamps.
After taking off the watch, put it in a location where the dial
is exposed to bright light, such as by a window.

10
The charge of the watch is low if the
second hand rotates counterclockwise
when you check the power reserve (page 16)
or the time signal reception (page 17).
You can operate the watch as usual.
However, the watch needs to be charged.
After rotating
counterclockwise ...
Indicates the
reception result
Recharging your watch Recharging your watch

11
In addition, for optimal performance, perform the following:
• Expose the watch with the dial facing towards direct sunlight for five to six hours
at least once a month.
• Avoid leaving the watch in a dark place for long periods of time.
Caution
• When the watch is regularly covered with long sleeves, it may not be charged
sufficiently. Try to keep the watch exposed to light sufficient for charging.
• Do not charge the watch at a high temperature (about +60˚C (140˚F) or higher).
Recharging your watch Recharging your watch

12
Charging time by environment
Below are the approximate times required for charging when exposing the watch dial
to light continuously. Please use this table as a reference only.
Environment Illuminance
(lx)
Charging time (approx.)
To work for
one day
To start working
normally when the cell
is discharged
To become fully
charged when the cell is
discharged
Outdoors (sunny) 100,000 4 minutes 2.5 hours 35 hours
Outdoors (cloudy) 10,000 13 minutes 3 hour 70 hours
20 cm (7-7/8
inches) away from
a fluorescent lamp
(30W)
3,000 45 minutes 6 hours 220 hours
Interior lighting 500 4.5 hours 30 hours ✽
Recharging your watch Recharging your watch

13
Recharging your watch Recharging your watch
✽To charge the rechargeable cell fully, it is recommended to expose the dial to
direct sunlight. A fluorescent lamp or interior lighting does not have sufficient
illumination to charge the rechargeable cell fully.
• When fully charged, the overcharging prevention function works automatically.
The accuracy or parts of the watch will not be affected by extra charging.
Run time
Fully charged to fully discharged:
Approximately ten months (at normal operation)
Approximately three years (with power save feature)

14
When the watch reaches a low charge state—insufficient charge warning
function
When the power reserve becomes low, the second hand
moves once every two seconds—This is the insufficient
charge warning function. Charge the watch by exposing
the dial to light.
• When the watch is sufficiently charged, the second hand
will move normally.
• If you have not charged the watch for several days since
the insufficient charge warning movement began, the
watch will run out of power and stop.
Caution
Even when the second hand moves once every two seconds, the current time and
date are indicated. However, operations and signal reception are not possible.
Recharging your watch Recharging your watch

15
Power save feature
When the watch is not exposed to light for a long period of time, such as when you
store it in the dark, the minute hand and second hand automatically stop to save
power. However, the watch still keeps the time.
• When the crown is in position or , the power save feature will not activate.
• The power save feature can not be activated manually.
To cancel the power save feature
When the watch is exposed to light sufficient for charging, the power save feature is
automatically canceled and normal time indication will resume.
After the power save feature is canceled, you should receive the time signal manually.
See pages 34 and 35.
• The power save feature cannot be canceled by operating the crown or buttons.
Recharging your watch Recharging your watch

16
Checking the power reserve
1. Ensure that the crown is in position .
2. Press the lower right button briefly.
The second hand moves to indicate the power reserve.
The second hand
indicates “OK” or “NO”
The watch is sufficiently charged.
The second hand rotates
counterclockwise, then
indicates “OK” or “NO”
The charge of the watch is low.
Charge the watch. See pages 9
to 15.
• “OK” and “NO” indicate the reception result of the time
signal and no relationship to the power reserve.
3. Press the lower right button briefly to finish the
procedure.
The current time is indicated.
• The current time will be indicated automatically after 10
seconds even without pressing the button.

17
Checking the time signal reception
1. Ensure that the crown is in position .
2. Press the lower right button briefly.
The second hand indicates the
reception result.
OK Reception has succeeded.
NO Reception has failed.
When reception has failed, see page
32.
3. Press the lower right button
briefly to finish the procedure.
The current time is indicated.
• The current time will be indicated automatically after 10
seconds even without pressing the button.
When reception
has succeeded
NO
RX
OK
-
7
-
9
-
1
1
+
1
2
+
1
1
+
9
+
7
7
-
7
-
9
-
1
1
+
1
2
+
1
1
+
9
+
7
-
5
-
3
-
1
O
+
1
+
3
+
5

18
By setting the city or time difference from UTC, the local time and date is shown.
Select the city or time difference to indicate the current time and date.
• Whether you select the city or time difference depends on the appearance of your
watch.
Watch appearance for setting the city Watch appearance for setting the time difference
See pages 19 and 22 to 25. See pages 20 to 25.
Setting the World Time
City indication
NO
ON
OFF
RX
OK
-
7
-
9
-
1
1
+
1
2
+
1
1
+
9
+
7
-
5
-
3
-
1
O
+
1
+
3
+
5
7
NO
RX
OK
-
7
-
9
-
1
1
+
1
2
+
1
1
+
9
+
7
-
5
-
3
-
1
O
+
1
+
3
+
5
Time difference
indication