
Setting up your own PIN code. –New PIN must contain 6 digits
1. Open the safe as per the instructions above leaving bolt work in the
open position
To change your combination from factory setting you must have the
door open with the bolt work in the open position. (flush with the door)
2. Press the Star * button, you will hear a single beep followed by the
hash # button You will hear a single beep.
3. Enter the factory code of 1,2,3,4,5,6 & the number one (1) button will
light up Green. (Diagram 1)
4. Enter your new 6 digit PIN number, you will hear two (2) beeps
(diagram 2)
5. Entre your new 6 digit PIN number again, you will see the number One
(1) button light up green.(diagram 3)
6. With the door still open check that your new PIN code has been
accepted.
7. Operate the lock 5 times without closing the door to ensure the new
PIN code has been accepted be sure to press the * button and then
your new combo.
8. If unsure repeat the steps above.