claber Elettra Evolution User manual

Elettra Evolution
Elettra Evolution
Pag. 1
INSTALLING THE SOLENOID VALVE. The programmable solenoid valve is fully watertight and will function even if installed perma-
nently under water at a depth of up to one metre (IP68 ingress protection). It can be installed in the open or in a valve box, positio-
ned either horizontally or vertically.To ensure the control unit remains watertight, make certain that it is aligned with and fully inser-
ted in its seat, and that the transparent cover is securely screwed on, with the seal properly positioned in its groove. Warning: be
certain to install the programmable solenoid valve observing the water ow direction indicated by the arrow: "FLOW". To install the
battery and set the programmes, simply lift the lid of the valve box: the solenoid valve can be easily handled inside the box.
FITTING THE BATTERY. Unscrew the transparent cover. Remove the control unit. Unscrew the cap of the battery
housing and connect the battery, observing the correct polarity. Fit the battery inside the housing. Retighten
the cap, checking that the seal is positioned correctly in its seat. Align the control unit with the guide on the
casing and t it back into place. Retighten the transparent cover, checking that the seal is in its seat. Important:
use only 9V alkaline batteries. When tting the battery, the display lights up for 2 seconds, the solenoid valve
closes, and the timer clock will be set automatically to 00:00.
For Elettra Evolution 1”F (cod.): 90826
For Elettra Evolution 1”M (cod.): 90827
For Elettra Evolution 1”F (cod.): 90826
For Elettra Evolution 1”M (cod.): 90827
User manual
User manual
ONLY
ALKALINE
BATTERY
RUNNING
TIME
DAY
SELECT
123456
1
12 23 3
1
12 23 3
ONLY
ALKALINE
BATTERY
RUNNING
TIME
DAY
SELECT
123456
OK!
OK!
max 1m
a
a
b
b
ONLY
ALKALINE
BATTERY
RUNNING
TIME
DAY
SELECT
123456
ONLY
ALKALINE
BATTERY
a
a
b
b
b
b
c
cc
c
ONLY
ALKALINE
BATTERY
RUNNING
TIME
DAY
SELECT
123456
RUNNING
TIME
DAY
SELECT
123456
9V
Alcaline
ONLY
ALKALINE
BATTERY
RUNNING
TIME
DAY
SELECT
123456
9V
Alcaline
a
a
a
a
ONLY
ALKALINE
BATTERY
RUNNING
TIME
DAY
SELECT
123456
RUNNING
TIME
DAY
SELECT
123456
2 sec.
d
d
a
a
b
b
c
c
ONLY
ALKALINE
BATTERY
RUNNING
TIME
DAY
SELECT
123456
b
b

Elettra Evolution
Elettra Evolution
Pag. 2
SETTING THE CURRENT TIME. Pressing the button ENTER, the message OK will appear. Set the current time
using the FORWARD/BACK key buttons. (09:00, for example)
Press ENTER to conrm the setting.
DAILY PROGRAMMING.
The timer is programmed using just 3 buttons, with the aid of a wide display.Each page
has two functions: view program and, pressing ENTER, make changed to program. Pressing forward, the display
will show the other programs of the line.
For Elettra Evolution 1”F (cod.): 90826
For Elettra Evolution 1”M (cod.): 90827
For Elettra Evolution 1”F (cod.): 90826
For Elettra Evolution 1”M (cod.): 90827
User manual
User manual
1
12 23 3
1
12 23 3
ONLY
ALKALINE
BATTERY
RUNNING
TIME
DAY
SELECT
123456
a
a
a
a
a
a
RUNNING
TIME
DAY
SELECT
123456
x 1
b
b
ONLY
ALKALINE
BATTERY
RUNNING
TIME
DAY
SELECT
123456
RUNNING
TIME
DAY
SELECT
123456
x 1
b
b
ONLY
ALKALINE
BATTERY
RUNNING
TIME
DAY
SELECT
123456
a
a
RUNNING
TIME
DAY
SELECT
123456
b
b
ONLY
ALKALINE
BATTERY
RUNNING
TIME
DAY
SELECT
123456
ONLY
ALKALINE
BATTERY
RUNNING
TIME
DAY
SELECT
123456
ONLY
ALKALINE
BATTERY
RUNNING
TIME
DAY
SELECT
123456
back
forward
RUNNING
TIME
DAY
SELECT
123456
b
b
c
c
ONLY
ALKALINE
BATTERY
RUNNING
TIME
DAY
SELECT
123456
RUNNING
TIME
DAY
SELECT
123456
d
d
ONLY
ALKALINE
BATTERY
RUNNING
TIME
DAY
SELECT
123456
RUNNING
TIME
DAY
SELECT
123456
a
a
b
b
ONLY
ALKALINE
BATTERY
RUNNING
TIME
DAY
SELECT
123456
RUNNING
TIME
DAY
SELECT
123456
a
a
b
b
TIME
OPEN PROGRAM 1 (OPEN)
CLOSE PROGRAM 1 (CLOSED)
OPEN PROGRAM 2 (OPEN)
CLOSE PROGRAM 2 (CLOSED)
OPEN PROGRAM 3 (OPEN)
CLOSE PROGRAM 3 (CLOSED)
OPEN PROGRAM 4 (OPEN)
CLOSE PROGRAM 4 (CLOSED)
OPEN PROGRAM 5 (OPEN)
CLOSE PROGRAM 5 (CLOSED)
OPEN PROGRAM 6 (OPEN)
CLOSE PROGRAM6 (CLOSED)

Elettra Evolution
Elettra Evolution
Pag. 3
Press the FORWARD button to view the start time at which the valve opens, for programme 1. Press ENTER to
change the time displayed. Use the FORWARD and BACK key buttons to set the start time (open): for example,
10:26 hours. Press ENTER to conrm the setting. Press FORWARD a second time to view the closing time of the
valve, for programme 1.
The display reads “1=progr. 1 CLOSED”. Use the FORWARD and BACK key buttons to set the required closing time
(close): for example, 10:35 hours. Press ENTER to conrm the setting If subsequent programmes are to be set,
repeat the same procedure.
For Elettra Evolution 1”F (cod.): 90826
For Elettra Evolution 1”M (cod.): 90827
For Elettra Evolution 1”F (cod.): 90826
For Elettra Evolution 1”M (cod.): 90827
User manual
User manual
1
12 23 3
1
12 23 3
a
a
ONLY
ALKALINE
BATTERY
RUNNING
TIME
DAY
SELECT
123456
RUNNING
TIME
DAY
SELECT
123456
b
b
c
c
ONLY
ALKALINE
BATTERY
RUNNING
TIME
DAY
SELECT
123456
RUNNING
TIME
DAY
SELECT
123456
d
d
a
a
RUNNING
TIME
DAY
SELECT
123456
RUNNING
TIME
DAY
SELECT
123456
b
b
a
a
RUNNING
TIME
DAY
SELECT
123456
RUNNING
TIME
DAY
SELECT
123456
b
b
a
a
RUNNING
TIME
DAY
SELECT
123456
RUNNING
TIME
DAY
SELECT
123456
b
b
RUNNING
TIME
DAY
SELECT
123456
RUNNING
TIME
DAY
SELECT
123456
c
c
c
c
RUNNING
TIME
DAY
SELECT
123456
RUNNING
TIME
DAY
SELECT
123456
d
d
a
a
RUNNING
TIME
DAY
SELECT
123456
RUNNING
TIME
DAY
SELECT
123456
b
b
a
a
RUNNING
TIME
DAY
SELECT
123456
RUNNING
TIME
DAY
SELECT
123456
b
b
c
c
RUNNING
TIME
DAY
SELECT
123456
RUNNING
TIME
DAY
SELECT
123456
d
d
Mem.
c
cMem.
c
c
d
d

Elettra Evolution
Elettra Evolution
Pag. 4
WEEKLY PROGRAMMING. Press the FORWARD key button repeatedly until the weekly programming page is displayed.
Press ENTER to make changes to the weekly programming schedule. Number 1 is associated with the current day of the
week on which the rst watering programme is to be set: if the current day is Thursday, for example, then 1=Thursday,
2=Friday, etc. Use the FORWARD and BACK key buttons to position the cursor on the day of the week you wish to select.
Press ENTER to deactivate or reactivate watering for the selected day (the relative number disappears from the display).
For example: 2 (Friday) and 5 (Monday) To quit weekly programming, position the cursor under EXIT and press ENTER.
MANUAL FUNCTION. Press the FORWARD key button to display the manual watering function. Press ENTER to
activate it. Pressing BACK, the timer valve opens, whilst pressing FORWARD the valve will close. This function is
useful for watering plants when required, without deleting the programmes already stored. In any case, the
valve will close automatically after 5 minutes. To quit the manual function before 5 minutes have elapsed, close
the valve and press ENTER.
For Elettra Evolution 1”F (cod.): 90826
For Elettra Evolution 1”M (cod.): 90827
For Elettra Evolution 1”F (cod.): 90826
For Elettra Evolution 1”M (cod.): 90827
User manual
User manual
RUNNING
TIME
DAY
SELECT
123456
ONLY
ALKALINE
BATTERY
RUNNING
TIME
DAY
SELECT
123456
RUNNING
TIME
DAY
SELECT
123456
ONLY
ALKALINE
BATTERY
RUNNING
TIME
DAY
SELECT
123456
RUNNING
TIME
DAY
SELECT
123456
1
12 23 3
1
12 2
a
aa
a
ONLY
ALKALINE
BATTERY
RUNNING
TIME
DAY
SELECT
123456
RUNNING
TIME
DAY
SELECT
123456
b
b
c
c
ONLY
ALKALINE
BATTERY
RUNNING
TIME
DAY
SELECT
123456
d
d
b
b
c
c
d
d
RUNNING
TIME
DAY
SELECT
123456
x 3
RUNNING
TIME
DAY
SELECT
123456
ONLY
ALKALINE
BATTERY
RUNNING
TIME
DAY
SELECT
123456
RUNNING
TIME
DAY
SELECT
123456
x 3
RUNNING
TIME
DAY
SELECT
123456
ONLY
ALKALINE
BATTERY
RUNNING
TIME
DAY
SELECT
123456
RUNNING
TIME
DAY
SELECT
123456
c
c
d
d
RUNNING
TIME
DAY
SELECT
123456
ONLY
ALKALINE
BATTERY
RUNNING
TIME
DAY
SELECT
123456
RUNNING
TIME
DAY
SELECT
123456
a
a
b
b
a
a
b
b
RUNNING
TIME
DAY
SELECT
123456
ONLY
ALKALINE
BATTERY
RUNNING
TIME
DAY
SELECT
123456
RUNNING
TIME
DAY
SELECT
123456
c
c
d
d
RUNNING
TIME
DAY
SELECT
123456
ONLY
ALKALINE
BATTERY
RUNNING
TIME
DAY
SELECT
123456
RUNNING
TIME
DAY
SELECT
123456
a
a
b
b
RUNNING
TIME
DAY
SELECT
123456
ONLY
ALKALINE
BATTERY
RUNNING
TIME
DAY
SELECT
123456
RUNNING
TIME
DAY
SELECT
ONLY
ALKALINE
BATTERY
RUNNING
TIME
DAY
SELECT
123456
RUNNING
TIME
DAY
SELECT
123456
e
e
c
c
d
d

Elettra Evolution
Elettra Evolution
Pag. 5
DELETE PROGRAMMES. To delete a programme, press FORWARD until the display shows the“CLOSED”page for
the programme to be removed (programme 2, for example) Press ENTER, then press the FORWARD and BACK
key buttons simultaneously.
For Elettra Evolution 1”F (cod.): 90826
For Elettra Evolution 1”M (cod.): 90827
User manual
User manual
1
1
a
a
a
a
ONLY
ALKALINE
BATTERY
RUNNING
TIME
DAY
SELECT
123456
RUNNING
TIME
DAY
SELECT
123456
b
b
x 4
RUNNING
TIME
DAY
SELECT
123456
RUNNING
TIME
DAY
SELECT
123456
c
cMem.
Program 1 deleted
For more information and further details, please consult the instruction manual supplied with the product.
2
2
b
b
c
c
ONLY
ALKALINE
BATTERY
RUNNING
TIME
DAY
SELECT
123456
RUNNING
TIME
DAY
SELECT
123456
d
d