Clevertronics FBS2LED-DIF Series User manual

1948794
V1.1
18 April 2019
THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK
240V 600mm Odyssey Quantum LED Strip Batten
Installation & Maintenance Instruction Leaflet
Victoria (Head Office & Manufacturing)
195 Chesterville Rd
Moorabbin VIC 3189
Phone: [phone]
Fax: [phone]
New South Wales
Phone: [phone]
Fax: [phone]
Queensland
Phone: [phone]
Fax: [phone]
South Australia/Northern Territory
Phone: [phone]
Fax: [phone]
Western Australia
Phone: [phone]
Fax: [phone]
New Zealand
Phone: [phone]
Designed in Australia to comply with the requirements
of AS2293.3: 2005 and AS/NZS CISPR15: 2017
Models:
FBS2LED-DIF-zz
Spare Parts:
Options:
Microwave Sensor
zz=MS
DALI Driver
zz-DD
8002695
PCA: LED Strip 8S6P, ALS-13-840-0-02
1330029
LED Driver - 40W, 500-1050mA, 15-50V
1330038
LED DALI Driver - 25W, 350-1050mA, 20-50V (-DD Option)
1190117
SENSOR:Microwave Motion, IP20, MC602S
Important:
It is illegal for anyone, except for a licensed electrician to install or maintain this product. Before installation,
ensure that the electricity supply has been switched off and isolated. Installation must be carried out in
accordance with the relevant Australian and International Standards.

1948794
V1.1
18 April 2019
Installation:
This Odyssey Quantum LED Strip batten can be wall or ceiling mounted.
•Refer Images below for the mounting hole and cable access.
•Remove the diffuser.
•Remove the cover plate and disconnect the LED strip connector. Unhook the lanyard
•Position the batten in the desired location.
•Mark out the fixing points on the mounting surface.
•Install appropriate fixing hardware.
•Route power supply cables through the access hole as the rear of the fitting or the ends if using
surface conduit (punch out the knock-outs in the plastic end caps)
•Fasten the batten to the surface.
•Terminate the supply cable to the terminals marked L, N and E (240V AC/50Hz)
•Attach the cover plate to lanyard, Re-connect the LED strip connector and Re-attach the cover
plate onto the body of the batten.
•Re-install the diffuser
Dimensions:
Warranty:
For Product Warranty information and Terms and Conditions of Sales please refer to our website
http://clevertronics.com.au/terms-conditions-sale-australia-nz/
PAGE INTENTIONALLY LEFT BLANK