Clinton 6198 User manual

BARIATRIC
TREATMENT TABLES
MODEL 6198
ASSEMBLY INSTRUCTIONS

Thank you for counting on Clinton to meet your medical
equipment needs by purchasing this quality equipment.
All Clinton equipment is designed and manufactured to
provide years of dependable service because we want you
as a customer now and in the future. Below are easy to follow
instructions on how to properly assemble your equipment.
Please contact us at 800-441-9131 if you experience any
difficulty with the assembly or have questions.
INTENDED USE
Clinton treatment table, model 6198, is specifically
designed and engineered for the use by a single person
at a time, who is attended to and observed by trained
medical/physical therapy personnel. Never leave anyone
on the table unattended. Person’s weight and the
combination of force exerted on the table during treatment
is not to exceed a total of 600 lbs.
A. Legs
B. Frame
C. Top
D. Laminate Shelf
E. Leg Levelers
Tools Required
(2) Allen Wrenches (provided)
(1) Crescent Wrench (provided)
Time Required
• 20–25 Minutes
Hardware
(8) 1 " Sockethead Cap Screw
(4) 13/8 " Flathead Cap Screw
(8)
1/4
" Locknuts
(2) Allen Wrenches
(1) Crescent Wrench
ASSEMBLY INSTRUCTIONS FOR BARIATRIC TREATMENT TABLE
MODEL 6198
MAXIMUM WEIGHT CAPACITY 600 LBS
2
1
Attach the two center support legs using (4)
1" sockethead cap screws secured with 1/4 "
locknuts, using the allen wrench and crescent
wrench provided.
Invert table and swing folded legs into the
upright position. Insert 1" sockethead cap screw
and secure with 1/4 " locknut using the allen
wrench and crescent wrench provided.
Secure all four corner legs.
A
A
A
E
E
E
D
B
C

4
5
3
Adjust the foot levelers on each leg by turn-
ing clockwise to shorten or counter clockwise
to extend the foot. Invert the table and make
adjustments until the table is level and wobble-free.
Apply Velcro® to the top side of the leg brace
and the underside of the shelf, and place into
position.
Attach the spanner using the (4) 13/8 " flathead
cap screws.
6Clean with disinfectant according to Cleaning
Guidelines on back page prior to use.
Limited Warranty
ON FRAME &
ELECTRICAL
COMPONENTS
Limited
Warranty
FOR SAFETY PURPOSES, TAKE TIME TO CHECK
ALL SCREWS, BOLTS AND NUTS TO INSURE THAT
THEY ARE SECURELY TIGHTENED AND THAT THE
TABLE HAS BEEN PROPERLY ASSEMBLED
ACCORDING TO THESE INSTRUCTIONS.

1140 East Edison St., York, PA 17403
800-441-9131 • 717-848-3519
Toll-Free Fax [phone]
Fax [phone]
www.clinton-ind.com
© Copyright, Clinton Industries, Inc.
Clinton Industries warrants manufactured products to be free of defects in materials, workmanship or design
under normal use for five years on all products, from the date of purchase. This warranty does not include
damage resulting from accident, abuse or misuse, alteration, or negligence of the product and expressly
excludes normal wear of parts (including but not limited to vinyl). Contact Clinton for full warranty details.
Warranty
Clinton products are built to be durable. With proper care, your Clinton equipment will provide years of
superior looks and performance. Clean platform with a soft cloth and any mild cleaning agent that may be
required for sanitation. NEVER use abrasive scrubbing agents that may scratch the surfaces. Prior to cleaning
entire surface, test cleaning agents on an inconspicuous area. Note that certain cleaning agents
can be harmful to the surfaces of the product. Periodically check all fasteners to make sure they remain
secure.
Care & Cleaning