CLS Miriam GII Dynamic White User manual

www.cls-led.com www.cls-led.com
- 8 - - 1 -
CLS Manuals
CLS Miriam GII Dynamic White
Version 1.0 January 2012
CLS Miriam GII Dynamic White
2007 CLS-LED BV. All rights reserved. Information subject to change without notice, CLS-LED BV and all affiliated companies disclaim
liability for injury, damage direct or indirect loss, consequential or economic loss or any other loss occasioned by the use of, inability to
use or reliance on the information contained in this manual. No part of this manual may be reproduced, in any form or by any means,
without permission in writing from CLS-LED BV. Other legal information can be found in our General conditions to be found on the
back of your CLS-LED BV invoice or on our website www.cls-led.com/Conditions.pdf

CLS Manuals
CLS Atmosphere LED-panel
www.cls-led.com www.cls-led.com
- 2 - - 7 -
CLS Manuals
Optional accessories
• 707028 CLS Zense DMX controller + built in 4 amp RGB dimmer
• 707030 CLS ACX60 DMX controller for max. 60 channels
• Y140010 CLS Miriam barndoor
• Y140025 CLS Miriam GII RGB/DW extension cable IP65 5 mtrs
• Y140027 CLS Miriam GII RGB/DW extension cable IP65 10 mtrs
• Y140030 CLS Miriam RGB/DW connection cable XLR3-connector 5mtr
• Y140040 CLS Miriam RGB/DW DMX cable outdoor
• Y140050 CLS Miriam RGB/DW connector set male/female IP65
• Y140060 CLS Miriam RGB/DW DMX terminator IP65
SAFETY INFORMATION
Warning! This product is for professional use only, not for domestic use.
Read this manual before powering up or installing the CLS Miriam GII. Follow the instructions
listed below and observe all warnings in this manual.
INTRODUCTION
Thank you for selecting the CLS Miriam GII Dynamic White. The Miriam Dynamic White offers the possibility
to easily adjust the colour temperature of the light from warm white to cold white (2700K - 5000K). The CLS
Miriam GII DW can be used indoor and outdoor through its waterproof (IP65) housing. With these qualities
the CLS Miriam GII DW is mountable almost everywhere.
NOTE: It is important to read this manual before you install this product.
CLS Miriam GII Dynamic White
Included items
The CLS Miriam GII is shipped in one package containing the following items:
• 1 x CLS Miriam GII
• 1 x user manual
Available Miriam GII Dynamic White spots
• 140210 CLS Miriam GII DW superspot 12° 31xRebel 110-240VAC IP65
• 140220 CLS Miriam GII DW spot 15° 31xRebel 110-240VAC IP65
• 140230 CLS Miriam GII DW medium flood 32° 31xRebel 110-240VAC IP65
• 140240 CLS Miriam GII DW ellipt. 14x36° 31xRebel 110-240VAC IP65
• 140250 CLS Miriam GII DW wide flood 44° 31xRebel 110-240VAC IP65
• 140260 CLS Miriam GII DW very wide flood 120° 31xRebel 110-240VAC IP65
Protection from electric shock
• Disconnect the power supply from AC power before installing, dismounting or maintaining the unit.
• Make sure all connectors are connected properly.
• Use only a source of AC power that complies with local building and electrical codes and has both
overload and ground-fault protection.
• Refer all service to a qualified technician.
LIST OF SYMBOLS
Multiple connection
Daisychain connectivity
Installation depth
In centimeters
Swivel
Fixture is horizontally rotatable,
indicated in degrees
Swivel
Fixture is vertically rotatable,
indicated in degrees
Mounting hole
In centimeters
Application area
Indoor or outdoor
Application area
Floor, wall or ceiling
Protection class
One, two or three
Cable length
Maximum cable attached
to the fixture in centimeters
Lifespan
Of the light source in hours
Driver
Inclusive or exclusive
Pressure
Maximum pressure on
the fixture in kg/cm2
Weight
In grams/kilograms
Curve
Minimal bending curve
in centimeters
LED pitch
Pitch between the
LEDs in millimeters
Power supply
In VAC, VDC or milliAmpere
Power consumption
In VA or Watt
IP value
Ingress Protection classifies the
degrees of protection provided
against the intrusion of the product
Housing
Housing material
Cutting length
Indicated by the
cutting marks
DMX channels
Numbers of DMX channels
on a product
LEDs
Kind of LED used in the
fixture
50 cm
Lenses
Availble lenses,
indicated in degrees
Plug & play
Easy connection using the
SmartConnect system
Colour temperature
White in different Kelvin values;
Cold white, neutral white, warm
white or extra warm white
Colour
Available colours;
Amber, blue, red or green
Colour changing
RGB, RGB-W, RGB-A
or Dynamic White
DMX input
Fixture works on DMX512
protocol
Combined product
Compose your own fixture
Warranty
3 years warranty on the product
Energy label
Conformité Européenne
CE marking for free marketability of
industrial goods within the EU
54º 8º 12 x 50º
Luxeon
1 x
3000K 2700K
6300K 4000K
DMX
512
A
Max.
700 mA
Max.
3 Watt
100~240
VAC
100~240
VDC
Max.
20 VA
IP40
Aluminum
Brushed
RGB-W
RGB RGB-A

CLS Manuals
CLS Atmosphere LED-panel
www.cls-led.com www.cls-led.com
- 6 - - 3 -
CLS Manuals
CLS Miriam GII Dynamic White
TECHNICAL SPECIFICATIONS
LED: Luxeon Rebel
Lenses: Superspot 12º, spot 15º, medium flood 32º,
elliptical 14x36º, wide flood 44º, very wide flood 120º
Colour: Dynamic White 2700K - 5000K
Power supply: 110 ~ 240 VAC
Power consumption: Max. 110 VA
Housing: Aluminum
IP value: IP65
Cable length: 1 meter (power) 2 x 3 meter (DMX)
DMX input: DMX512
DMX output channels: 512 channels
Weight: 4,8 kg
Measurements: ø 225 mm x 310 mm (d)
Ambient temperature: -10 ºC to +40 ºC
Protection from injury due to falls
• Verify that all covers and mounting hardware is securely fastened.
• Block the access around the work area whenever installing or removing the unit.
Protection from burns and fire
• Do not install the product near a heat source.
• Do not install the product in a corrosive, flammable or explosive area.
• Do not modify the product, or install other than genuine parts.
• Do not operate the product if the ambient temperature exceeds 40º C.
• Do not stare into the LED, this can cause damage to the eyes.
ATTENTION!
ThE CLS MIrIAM GII DyNAMIC whITE IS AN IP65 OuTDOOr uNIT,
buT uNDEr NO CIrCuMSTANCES CAN bE uSED uNDEr wATEr!
WARNING

CLS Manuals
CLS Atmosphere LED-panel
www.cls-led.com www.cls-led.com
- 4 - - 5 -
CLS Manuals
CLS Miriam GII Dynamic White
The CLS Miriam GII DW can be installed
by using the mounting hole. Drill a hole to
secure it in the wall, floor, ceiling, etc. Drill
a second hole for the power wire and DMX
cables.
Adjust the Miriam GII DW to the
preferred position by turning the
unit towards or away from the wall.
Connect the DMX cables to the DMX
controller, then put the power wire in the
earthed socket.
The CLS Miriam GII DW is ready to use.
270o
OFFFCNCH %
123456
270o
OFFFCNCH %
123456
WHITE COLOUR OPERATION
The White Colour of the CLS Miriam GII DW can easely be adjusted.
To enter the program press the two buttons at the same time for 5 seconds.
The first digit represents the colour (if there is only white LEDs then there is
only one color). 0 and 1 in the first digit will each represent 15 and
16 white LEDs separately.
First digit: 0 = 15 Cold white LEDs
1 = 16 warm white LEDs
The second digit represents the lighting intensity level from 0 to 9 to
change each white colour intensity on the lamp.
Second digit: 0 = 0% 2 = 22% 4 = 44% 6 = 66% 8 = 88%
1 = 11% 3 = 33% 5 = 55% 7 = 77% 9 = 100%
MEASUREMENTS
ø 225 mm 310 mm
INSTALLATION
This section shows how to install the CLS Miriam GII Dynamic White.
IN OUT
100~240 VAC
Button 1
Display
DMX in / out
Button 2
Test mode operation
To check if all colours work properly, it is possible to put the CLS Miriam GII DW in a test mode. Simply
adjust the address to 0. The Miriam GII DW will show all colours in a stepping/fade order. Make sure to reset
the address when testing is done.
Master/Slave operation
The CLS Miriam GII DW can also operate in a master/slave mode. The CLS Miriam GII DW has a built-in
programme with two speed selections P1 (fast) and P2 (slow). To select the master/slave mode, press the
up or down button on the back of the CLS Miriam GII DW. This selection is also stored. When the master
slave/mode is selected, there can only be one master. All other Miriam GII DW's must be addressed as slave
on address 1.