Coaster 107891 User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
107891
Dining Table
REVISION 0 : 05/16/2019
PAGE 1 OF 5
COASTERFURNITURE.COM

ITEM:107891 (B1-B3)
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
WARNING!
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME 30 MINUTES
PARTS IDENTIFICATION
B1 ( BOX 1) B3 ( BOX 3)
A TOP MARBLE 1PCS D BASE 2PCS
B2 ( BOX 2)
B TOP FRAME 1PCS
C pedestal 4PCS
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
PAGE 2 OF 5 COASTERFURNITURE.COM

ITEM:107891 (B1-B3)
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
WARNING!
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
2. This product is for home use only and not intended for commercial establishments.
HARDWARE IDENTIFICATION
Z-B2 (BOX 2) - HARDWARE PACK IS LOCATED IN 107872N (B2)
1 FLAT WASHER D20*2 20PCS
2SHORT BOLT
(M8*25mm) 12PCS
3 ALLEN WRENCH 1PCS
4SHORT BOLT
(M8*40mm) 8PCS
5 GLASS REST 6PCS
6 DIA8*10MM 4PCS
Hardware pack is located in 107891 B2
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
PAGE 3 OF 5 COASTERFURNITURE.COM

ITEM:107891 (B1-B3)
ASSEMBLY INSTRUCTIONS
STEP 1
STEP 2
STEP 3
STEP 4
PAGE 4 OF 5 COASTERFURNITURE.COM

ITEM:192071 (B1-B2)
PAGE 5 OF 5 COASTERFURNITURE.COM