Coaster 108812 User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
108812
Dining Chair
Date:10/16/2020
PAGE 1 OF 5
COASTERFURNITURE.COM

ITEM:108812
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
WARNING!
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME 10 MINUTES
PARTS IDENTIFICATION
B1 ( BOX 1)
ASEAT AND
BACK 2PCS
B BASE 2PCS
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
PAGE 2 OF 5 COASTERFURNITURE.COM

ITEM:108812
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
WARNING!
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
2. This product is for home use only and not intended for commercial establishments.
HARDWARE IDENTIFICATION
Z-B1 (BOX 1) - HARDWARE PACK IS LOCATED IN 108812
1ALLEN WRENCH
8mm 1PC
2SHORT BOLT
(M8*35mm) 8PCS
3FLAT WASHER
(Dia10mm) 8PCS
Hardware pack is located in 108812
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
PAGE 3 OF 5 COASTERFURNITURE.COM

ITEM:108812
ASSEMBLY INSTRUCTIONS
STEP 1
STEP 2
PAGE 4 OF 5 COASTERFURNITURE.COM

ITEM:108812
PAGE 5 OF 5 COASTERFURNITURE.COM