Coaster 460071 User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
460071 (B1-B3)
Twin/Twin Bunkbed
REVISION 0 : 05/14/2012
PAGE 1 OF 7 COASTERFURNITURE.COM
REVISION 1 : 10/08/2012
REVISION 2 : 11/06/2013
REVISION 3 : 01/21/2016
REVISION 4 : 10/07/2020

ITEM:460071(B1-B3)
ASSEMBLY TIME
ARIGHT UPPER
BED END
1PC GLOWER SIDE RAIL 2PCS
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
COASTERFURNITURE.COM
PARTS IDENTIFICATION
30 MINUTES
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2.
This product is for home use only and not intended for commercial establishments.
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
B1PC
CRIGHT LOWER
BED END 1PC
D1PC
EUPPER
GUARD RAIL 4PCS
FUPPER
SIDE RAIL 2PCS
HGUARD SUPPORT 2PCS
IROLL SLAT
(13PCS) 2SETS
J1PC
RIGHT LADDER STILE
K1PC
LLADDER STEP 6PCS
PAGE 2 OF 7
LEFT UPPER
BED END
LEFT LOWER
BED END
LEFT LADDER STILE
(BOX 1)
B1
(BOX 2)
B2
(BOX 3)
B3

HARDWARE IDENTIFICATION
1 LONG BOLT 24PCS 6 SHORT BOLT 6PCS
2BARREL NUT 24PCS 7 FLAT HEAD SCREW 12PCS
3 WOOD DOWEL 48PCS 8 METAL DOWEL 4PCS
4MEDIUM BOLT 6PCS 9 ALLEN WRENCH 1PC
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
(1/4 x 32mm - BLK)
(1/4 x 13mm - BLK)
(10 x 40mm )
(1/4 x 38mm - BLK)
(4 x 30mm - BLK)
(9.5 x 125mm-BLK)
(1/4 x 90mm - BLK)
(4MM - BLK)
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2.
This product is for home use only and not intended for commercial establishments.
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
PAGE 3 OF 7
5HEX NUT SCREW 12PCS
(1/4 x 50mm - BLK)
COASTERFURNITURE.COM
Z-B2(BOX 2) - HARDWARE PACK IS LOCATED IN 460071 (B2)
ITEM:460071(B1-B3)

ASSEMBLY INSTRUCTIONS
STEP 1
PAGE 4 OF 7
STEP 2
STEP 3 STEP 4
H
23
1
1
11 9E
E
F
4
4
4
9
B
EF
HA
7
7
7
7
7
7
I
D
C
G
G
2
31
19
7
7
7
7
7
7
I
COASTERFURNITURE.COM
1.1
1.2
ITEM:460071(B1-B3)

ASSEMBLY INSTRUCTIONS
PAGE 5 OF 7
STEP 7 STEP 8
STEP 5 STEP 6
8
8
8
KK KJ
K
L
KL
KL
KL
KL
KL
K5
K3
K
6
K
6
K
9
K
9
COASTERFURNITURE.COM
ITEM:460071(B1-B3)
COMPLETE

ASSEMBLY INSTRUCTIONS
The length and width of the bunk mattress are as follow:
Upper bunk 37 1/2"- 38 1/2" 6" Maximum
Lower bunk 6" Maximum
1.
2.
3. Surface of mattress must be at least 5 in. (127 mm) below the upper edge of guardrails.
4. Do not allow children under 6 years of age to use the upper bunk.
5. Prohibit more than one person on upper bunk.
6.
7. Do not allow horseplay on or under the bed and prohibit jumping on the bed.
8.
Always use the ladder for entering and leaving the upper bunk.
9. Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
10. Use of a night light may provide added safety precaution for a child using upper bunk.
11.
12. The use of water or sleep flotation mattress is prohibited.
13. Keep these instructions for future reference.
STRANGULATION HAZARD:
14.
REPLACEMENT PARTS:
Always use the recommended size mattress or mattress support or both to help prevent
the likelihood of entrapment or falls.
Periodically check and ensure that the guardrail, ladder, and other components are in
their proper position, free from damage, and that all connectors are tight.
Always use guardrails on both long sides of the upper bunk. If the bunk bed will be placed
next to the wall, the guardrail that runs the full length of the bed should be placed against
the wall to prevent entrapment between the bed and wall.
Never attach or hang items to any part of the bunk bed that are not designed for use with
the bed for example, but not limited to hooks, belts, and jump ropes.
Replacement parts, including additional guardrails may be obtained from any COASTER
Furniture Dealer.
PAGE 6 OF 7
COASTERFURNITURE.COM
74" -75"
Ensure thickness of mattress does not exceed 6” and there must be at least 5” from mattress
sleeping surface to top edge of guardrail.
SAFETY WARNING
Follow the information on the warnings appearing on the upper bunk end structure and on
the carton. Do not remove the warning label from bed.
Width
SIZE OF MATTRESS
Length
74" -75" Thickness
37 1/2"- 38 1/2"
ITEM:460071(B1-B3)

ASSEMBLY INSTRUCTIONS
1.
2.
3.
4.
5.
Any misuse or unauthorized use of the ladder could result in serious or fatal injury.
Failure to follow the above WARNING, and/or failure to follow assembly instructions
completely, will void any and all liability of COASTER COMPANY OF AMERICA for
damages and injury to persons and property.
PAGE 7 OF 7 COASTERFURNITURE.COM
When using beds as bunk beds, the ladder MUST be securely attached to the upper bunk
rail at all times.
When using the beds as two (2) separate floor-standing beds, the ladder MUST be stored
in a separate location where children cannot use the ladder in any manner.
DO NOT use, nor permit children to use, the ladder in any manner whatsoever, other than
to access the top unit when used as bunk beds, and only if the ladder is securely attached
to the top bunk rail, as set forth in the instructions.
WARNING
TO PREVENT SERIOUS OR FATAL INJURY
Coasterfurniture.com | 877-COASTER (262-7837)
ITEM:460071(B1-B3)

Dimension tolerance ±5%
Note :
83.86"
42.52"
18.98"
27.95"
69.61"
COASTERFURNITURE.COM
INNER SIZE: 76.97" x 39.49"
15.75"
10.31"
12.01"
76.97"
17.97"
14.76"
ITEM:460071(B1-B3)