Coaster 708097 User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
708097
End Table
REVISION 0 : 04/13/2023 PAGE 1 OF 5 COASTERFURNITURE.COM

ITEM: 708097
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME
HARDWARE IDENTIFICATION
1ALLEN WRENCH
(M4 - BLK)
1PC
2BOLT
(M6 x 35mm - RBW)
4PCS
3LOCK WASHER
(M6 - RBW)
4PCS
4FLAT WASHER
(M6 - RBW)
4PCS
5CAM BOLT
(24MM - SR)
4PCS
6CAM NUT
(15/15+16 Z1 BRIGH - SR)
4PCS
7PLASTIC DOWEL
(M8 x 30mm - BLK)
4PCS
8WAFER HEAD SCREW
(M4 x 38mm - BLK)
2PCS
9FLAT HEAD SCREW
(M4 x 38mm - RBW)
6PCS
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
COASTERFURNITURE.COM
2PCSAPRONB
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
15 MINUTES
PARTS IDENTIFICATION
A TOP 1PC
1PC
PAGE 2 OF 5
C LEG FRAME 2PCS
D SHELF

ITEM: 708097
ASSEMBLY INSTRUCTIONS
STEP 1
STEP 2
STEP 3
COASTERFURNITURE.COM
PAGE 3 OF 5

ITEM: 708097
ASSEMBLY INSTRUCTIONS
STEP 4
STEP 5
COASTERFURNITURE.COM
PAGE 4 OF 5

ITEM: 708097
ASSEMBLY INSTRUCTIONS
STEP 6
STEP 7
COASTERFURNITURE.COM
PAGE 5 OF 5

COASTERFURNITURE.COM
Note: Dimension tolerance ±5%
22.00" 22.00"
23.75"
3.00"
16.00"
18.25"
21.00" 21.00"
18.25"
ITEM: 708097