Coaster 709647 User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
709647
End Table
Date 10/25/2019
PAGE 1 OF
COASTERFURNITURE.COM

ITEM:709647(B1-B2)
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
WARNING!
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME 30 MINUTES
PARTS IDENTIFICATION
B1 ( BOX 1)
A top glass 1PCS
B2 ( BOX 2)
B Frame 1PCS
C legs 4PCS
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
PAGE 2 OF 5 COASTERFURNITURE.COM

ITEM:709647(B1-B2)
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
WARNING!
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
2. This product is for home use only and not intended for commercial establishments.
HARDWARE IDENTIFICATION
Z-B2 (BOX 2) - HARDWARE PACK IS LOCATED IN 709647 (B2)
1 Glass Rest 4pcs
2ALLEN WRENCH
8mm 1PC
3SHORT BOLT
(M8*35mm) 16PCS
4Flat washer
(Dia10mm) 16PCS
5plastic leg
(M8*10mm) 4PCS
Hardware pack is located in 709647 B2
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
PAGE 3 OF 5 COASTERFURNITURE.COM

ITEM:709647(B1-B2)
ASSEMBLY INSTRUCTIONS
STEP 1
STEP 1
STEP 3
STEP 4
PAGE 4 OF 5 COASTERFURNITURE.COM

ITEM:709647(B1-B2)
PAGE 5 OF 5 COASTERFURNITURE.COM