Coaster 801542 User manual

COASTERFURNITURE.COM
Fine Furniture for every stage of life
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
PAGE 1 OF 6
REVISION 0 : 04/20/2017
REVISION 1 : 07/01/2019
801542
BOOKCASE

801542
ITEM:
COASTERFURNITURE.COM
PAGE 2 OF 6
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIME
PARTS IDENTIFICATION
30 MINUTES
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
WARNING!
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store immediately.
2. This product is for home use only and not intended for commercial establishments.
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
Z
ASHELF 4 PCS
BTOP PANEL 1 PC
CMETAL FRAME 2 PCS
DSUPPORT BAR 1 PC
HARDWARE IDENTIFICATION
NO DESCRIPTION FIGURE Q’TY
1LARGE BOLT
M6x44mm BLK 20 PCS
2SHORT BOLT
M6x15mm BLK 4 PCS
3ALLEN WRENCH
4mm SR 1 PC

801542
ITEM:
PAGE 3 OF 6 COASTERFURNITURE.COM
2
3
x 4
2
DB
1
x 20
3
A
A
A
A
C
C
B
1
3
STEP 1
STEP 2

801542
ITEM:
PAGE 4 OF 6 COASTERFURNITURE.COM
STEP 3
COMPLETE

801542
ITEM:
PAGE 5 OF 6 COASTERFURNITURE.COM
Note : Dimension tolerance ±5%
360mm(14.25")
800mm(31.5")
1600mm(63")
89mm(3.5")
338mm(13.31")
290mm(11.42")
800mm(31.5")
338mm(13.31")
338mm(13.31")
338mm(13.31")

ANTI-TIPPING INSTALLMENT INSTRUCTIONS
FURNITURE TIPPING RESTRAINT
WARNING
Injury may result from tipping furniture.
This restraint may protect against tipping furniture.
Do not allow children to climb on furniture.
This restraint is not a substitute for proper adult supervision.
Failure to detach this restraint before moving the furniture
may result in injury and damage.
1. To attach the anti-tip strap, securely mount one end to the top of the case piece with
the 5/8” screw.
2. Position the case piece against the wall in the desired location.
3. Pull the anti-tip strap taut and mark the position of where you will secure the other end
on the wall.
4. Drill a 1-1/4” hole in the spot you marked.
5. Tap in plastic wall plug.
6. Fasten anti-tip strap with wall screw provided.
(Please install the anti-tiping kit in the middle of the case piece if only have one set of anti-tipping kit.)
WALL
PAGE 6 OF 6 COASTERFURNITURE.COM