9
RIDING
Your Coboc bike drives like an ordinary bike – only it’s more dynamic. The more
force you use to tread the pedals, the more force is unfolded in the motor. As
soon as you stop treading the pedals, the motor stops supporting you.
WARNING: You are going to be much more dynamic with your Coboc
bike than you are used to. Slowly get used to your Coboc bike.
INFO: Should you ever have the feeling that the motor support is tuning
in too early or too late, meaning at very low or very high pressure on the
pedals, note that you can always re-calibrate the torque sensor. You can
nd all the necessary information at our helpcenter https://support.coboc.biz/
navigating to 'Service und Pege' g'wie kalibriere ich mein Coboc Bike?'.
INFO: In the event of irregularities in operation or other mistakes,
resetting the user interface might help. To do this you need to press and
hold the power button (7) for about 20 seconds. Your bike is going to
signalize a successful reset by briey ashing the LEDs in blue and subsequently
moving the LEDs in green light.
CHARGING
The charging socket (8) is placed right behind the power button (7) at the user
interface. Simply connect the magnetic charging plug to start charging your
Coboc bike.
A full charge of the battery from 1% to 100% usually takes two and a half hours
with the regular Coboc 4A charger. However, the battery is already charged to
90% after two hours, which means that the charging time for the last 10% takes
a bit longer (half an hour).
The ideal outside temperature for battery charging is somewhere between 5ºC
and 35ºC. At temperatures between 0ºC and 40ºC electronics disables charging,
in order to protect the battery from getting damaged.
Quick start guide
COBOC E-DRIVE
Turning your bike on and off
Briey pressing the power button (7) of the user interface,
positioned at the bottom side of the top tube, activates
the Coboc E-Drive. Your LED display (6) is going to show
at least one lit LED, in order to indicate the battery level of
your Coboc bike. Putting more force into the pedals means
unfolding more motor power. As soon as you stop pedaling,
the motor support stops too.
WARNING: Because of the electrical support you
are going to be much faster and dynamic on the
road than you are used to with ordinary bikes. We
suggest you take your time to get used to this new driving
behavior.
Turning your lights on and off (Product line SEVEN/TEN)
Your Coboc bike is equipped with a lighting system. You can turn this system
on and off by pressing down on the power button (7) for 3 seconds. This is also
possible if the Coboc E-Drive is turned off.
Battery level – LEDs are lit up
Errors – LEDs are ashing
(8)
(7)
(6)
5 LEDs are lit up in blue battery level of 80 % to 100 %
4 LEDs are lit up in blue battery level of 60 % to 80 %
3 LEDs are lit up in blue battery level of 40 % to 60 %
2 LEDs are lit up in blue battery level of 20 % to 40 %
1 LED are lit up in blue battery level of 1 % to 20 %
4 LEDs are ashing red something is wrong with the motor cable
3 LEDs are ashing red something is wrong with the bottom bracket
torque sensor
2 LEDs are ashing red other errors
1 LED is ashing blue battery level is too low
