Cochlear Nucleus CR230 User manual

Quick Guide to the
Nucleus®CR230
Remote Assistant
Getting started
Quick reference

About
Use the Cochlear™Nucleus®
CR230 Remote Assistant to control
and monitor your Cochlear Nucleus
CP910 or CP920 Sound Processor. If you
are a bilateral recipient, your remote
assistant can control both processors.
NOTE
More information and warnings in the
CR230 Remote Assistant User Guide.

3QUICK GUIDE
ABOUT
Program button
Program button
Program button
Program button
Lock-unlock
slider
Home button
Left/Right
buttons
(Navigate)
USB cable socket
Telecoil button
Up/Down buttons
(Adjust settings)
OK button
(Select)
CR230 Remote Assistant

4NUCLEUS® CR230 REMOTE ASSISTANT
Navigate
Use the left or right
arrow buttons to move
between screens.
12
SENSITIVITY
6
VOLUME
SCAN
2
NOTE
Your remote assistant
may show different
screens, depending on
how it is set up.

5QUICK GUIDE
Home
ABOUT
12
SENSITIVITY
6
VOLUME
SCAN
2
Use the Home button
to return to the
Home screen.

6NUCLEUS® CR230 REMOTE ASSISTANT
Press the OK button from
the Home screen to display
processor status.
Check status
Green means
everything is
working
Sound meter shows
sound being “heard”
by processor
Press
OK
STATUS
SCAN
2
TIP
Use the sound meter
to check whether a
processor or accessory
is working properly.
Processor
battery level

7QUICK GUIDE
Your remote
assistant will
“go to sleep”
when not in
use. Press any
button to
“wake” it again.
SCAN
2
Wake
ABOUT

8NUCLEUS® CR230 REMOTE ASSISTANT
Charge battery
There are three options for charging:
Use the Cochlear™
Nucleus®CR200
Series Charging Kit.
B
OR
AUse the Cochlear™
Nucleus®Battery
Charger and the
Cochlear™
Nucleus®Battery
Charging Kit.

9QUICK GUIDE
POWER
Use the USB port on
a computer.
C
OR

10 NUCLEUS® CR230 REMOTE ASSISTANT
Turn on
Press and hold the
OK button to turn on.
SCAN
2

11QUICK GUIDE
TURN ON
Turn off
Press and hold
the OK button.
Select Switch Off.
SCAN
2OK
SELECT
Reset Settings
Switch Off
Cancel

12 NUCLEUS® CR230 REMOTE ASSISTANT
Lock and unlock
Lock-unlock
slider
Slide up to
unlock, down
to lock.
TIP
Use the lock-unlock slider
to show the battery level
of your remote assistant.

13QUICK GUIDE
TURN ON

14 NUCLEUS® CR230 REMOTE ASSISTANT
SCAN
2
Change programs
Up to four programs may be set up by your clinician.
Use the program buttons to change between programs.
Program button
Program button
Program button
Program button

15QUICK GUIDE
USE
Adjust settings
Use the up and down arrow buttons to adjust settings
such as volume, sensitivity, bass and treble (as set up
by your clinician).
Down
button
Up button
6
VOLUME
TIP
Adjust volume (or
sensitivity, if set up)
directly from the home
screen by pressing the
up or down buttons.

16 NUCLEUS® CR230 REMOTE ASSISTANT
SCAN program
SCAN program (if set up by your clinician) detects and
automatically adjusts your processor to the current
sound environment.
SCAN program
selected
SCAN
2

17QUICK GUIDE
SCAN program icons
SCAN program icons show your current
sound environment.
USE
SCAN On
Speech in noise
SpeechNoise
Music
Quiet
Wind

18 NUCLEUS® CR230 REMOTE ASSISTANT
Wireless Accessories
When a Cochlear Wireless Accessory (Mini Microphone
or TV Streamer) is paired with your processor, use your
remote assistant to start and stop streaming audio.

19QUICK GUIDE
USE
Turn on
Long-press the telecoil
button once to turn
Mini Microphone or
TV Streamer on.
1
1x
On
NOTE
You use the controls on
the Phone Clip to make
and receive calls.

20 NUCLEUS® CR230 REMOTE ASSISTANT
Mini Microphone on
Mini Microphone is streaming audio
to your processor.
Use
2
TV Streamer on
TV Streamer is streaming audio to
your processor.
Phone Clip on
Phone Clip is streaming audio to
your processor.