Cochlear Baha remote control 2 User manual

Cochlear™Baha®Quick Guide
Cochlear™Baha®Remote Control 2
Pre-paired sound
processors do not need
to be paired again. If your
sound processor is not
pre-paired, instructions
on how to easily pair it
with your Remote Control
2 are on the last page of
this guide.
Benefits of your Cochlear Baha Remote Control 2
• Allows you to discreetly adjust your Baha 4 Sound Processor
• Provides large buttons for simple volume or program changes
• Allows you to monitor your or your child’s sound processor
• Makes streaming to other wireless accessories easy
Note: The Baha Remote Control 2 can be paired to two Baha 4 Sound Processors
for those with a bilateral fitting.
Getting startedProduct overview
Charging the battery
On/Off control Sound processor
microphone mute
Streaming
(optional TV
Streamer or Mini
Microphone)
Home button Program change
Display
Increase volume
Decrease volume
Select left Sound
Processor only
Pairing button
Select right Sound
Processor only
Before using your Remote Control 2, you need to
fully charge the battery. To charge it, plug in the
charging cable as shown to the right. Then plug the
other end into a power outlet. During charging the
bars in the battery meter will be showing one, two
and three bars continuously. When fully charged all
three bars will be shown continuously.

Support
For full details about the Cochlear Baha Remote Control 2, please refer to the User Manual.
For full details about the Cochlear Baha 4 Sound Processor, please refer to the User Manual part A.
For further support and videos, visit the Cochlear website: www.cochlear.com
Using the Remote Control 2
Turning your Remote Control 2 ON and OFF
• To turn your Remote Control 2 ON slide the switch on the side of the Remote Control 2 down to the
ON position. A white ”I” icon will be visible on the base of the switch and the display will turn on.
• To turn your Remote Control 2 OFF, slide the ON/OFF switch up to the OFF position.
Activate streaming
Connected to streaming device.
A
No streaming device found.
A
If your sound processor is
paired with more than one
wireless accessory press once,
twice, or three times to toggle
between the accessories. If
you cannot connect to your
wireless accessory, move
closer to it and try again.
Deactivating streaming
Home: Stop streaming and
return to program 1 and
default volume settings
Stop streaming and return
to the last used program
and volume settings
Switching between sides
Select your left or right
sound processor if you use
2 sound processors.
A
Left and right hearing
instrument volume selected.
A
Left and right streaming
volume selected.
The batteries are low in the Baha Sound Processor and need to be replaced:
Remote Control 2 displays
In the left sound processor.
Everyday
In the right sound processor.
Everyday
The battery is low in the
Remote Control 2 and need
to be charged.
Everyday
The Phone Clip is active.
TVEveryday
Cochlear™Baha®Quick Guide
Cochlear™Baha®Remote Control 2

Cochlear Americas
13059 East Peakview Avenue
Centennial, CO 80111 USA
Telephone: [phone]
Support: 1 800 483 3123
Cochlear Canada Inc.
2500-120 Adelaide Street West
Toronto, ON M5H 1T1 Canada
Telephone: [phone]
Fax: [phone]
www.Cochlear.com/US
©Cochlear Limited 2014. All rights reserved. Hear now. And always and other trademarks and registered
trademarks are the property of Cochlear Limited or Cochlear Bone Anchored Solutions AB. The names of
actual companies and products mentioned herein may be the trademarks of their respective owners.
BUN300 ISS1 AUG14
Pairing with your Baha Sound Processor
ASwitch off your Baha 4 Sound Processor:
By opening the
battery door and
removing the battery.
By pressing the
“Off/volume down” button.
OR
Make sure the Remote Control 2 is fully charged and is turned ON.
CThe ‘search’ icon will display on the screen and
the Remote Control will now be in pairing mode
for 20 seconds.
FSearching and connecting to the hearing instruments
DWhile pairing mode is active, you can switch on your sound processor in two different ways:
By inserting the
battery and closing
the battery door.
By pressing the
“On/volume up” button.
OR
Connected to left
hearing instrument
and searching for right
hearing instrument Everyday
Press the pairing button on the Remote Control
once using the tip of a pen or similar object.
B
ESuccessful pairing will be indicated by an audible
melody played in the sound processor.
Searching for both
hearing instruments.
Cochlear™Baha®Quick Guide
Cochlear™Baha®Remote Control 2
Not everyone with hearing loss is a candidate for a Baha. All surgical procedures include an element of risk, and it is impossible to guarantee success. For complete information
regarding the risks and benefits of a Baha procedure, please refer to the Instructions for use for the Baha implant available at www.Cochlear.com/US/BahaIndications