Coffee Queen CAFELINO TRIO User manual

User manual
CQ CAFÉLINO TRIO
Rev. 110511
U / EN
Your retail dealer
...............................................................................
...............................................................................

1. Contents.
1. Contents sid. 2
2. General 3
3. Component overview, front 4
3. Component overview, inside machine 5
3. Component overview, programming switch 6
3. Component overview, function buttons 7
4. SERVICE; Installation and Start-up
Position machine 8
Hook up water to machine 8
Start machine 8
Fill concentrate in container 9
5. OPERATION
Dispensing drink into cup 10
6. CLEANING
Every day
Cleaning of entire mixer system 11
CLEANING
Remove mixer system 12
Wash parts 12
Re-install mixer system 12
7. Recipe PROGRAMMING
Using the pin code, adjust value of drinks 13 - 17
8. Reset Cup counter 18
9. Storage and transportation 19
10. Dimension sketch 20
11. Cleaning and care 21
2.

2. General. Cafélino Trio
Thank you for choosing a Cafélino Trio. We hope you enjoy it!
The machine must be connected correctly for your own safety.
Read the user guide before using the machine.
- The guide contains important instructions for proper and safe use of the machine.
- Always keep the guide close at hand.
Cafélino Trio
- Makes single beverage servings
- 4 drink options
- 3 concentrate containers
- Electronic temperature control
- Cleaning function inside panel.
- Hot water outlet
Facts:
Height 536 mm
Width 211 mm
Depth 446 mm
Power supply 230V/2200W
Cold water hook-up ½” external thread for fitting factory-supplied tube
3.

3. Component view, front. Cafélino Trio
4.
Tap for drink
Drip tray
insert
Drip tray Hot water
outlet
Connection of
power cord
Service plug
Emptying of water tank
Water hook-up
Touch panel

3. Component view, inside machine. Cafélino Trio
5.
Chute
Concentrate
container
ON/OFF
switch
4 Amp fuse
Cleaning button
Steam trap
Mixer bowl
Container: Width Depth Height Cafélino Trio
1 45 225 200 Coffee
2 67 225 200 Chocolate
3 67 225 200 Topping
1 2 3

3. Component view, electronic switch. Cafélino Trio
6.
Programming
switch
Programming switch, placed behind concentrate containers.

3. Component view, function buttons. Cafélino Trio
7.
Function buttons
1. Standard cup (group 1)
2. Large cup (group 1)
1. Standard cup (group 2)
2. Large cup . (group 2)
3. Hot water
4. Cleaning of mixing system.
5. Ready lamp
- The lamp lights constantly when the machine is ready.
- The lamp blinks when a drink is being poured.
1
2
1
2
3
4
5

4. Service. Installation and Start-up Cafélino Trio
1. Place the machine on a flat Connect the plug to an
waterproof surface. earthed 230V 10A wall outlet.
Note: Make sure air is able to circulate freely
behind the machine.
2. Connect the factory-supplied tube to the cold water feed using a ½” R- connection
piece. Make sure no folding or sharp bending occurs when you push the machine
back in place.
If the water pipeline is new, flush the system with water first to remove copper
shavings. These can damage the inlet valve.
3. Open the water tap.
4. Hit the ON/OFF switch inside the panel.
The water tank will fill automatically with
1.8 litres of water.
The element will not be powered until the water
reaches the level indicator.
The temperature is set to 85º Celsius.
5. Shut the panel door.
8.
ON / OFF
switch

4. Service. Installation and start-up Cafélino Trio
6. Fill concentrate into canister.
Remove the concentrate container to
avoid spilling the concentrate in the
machine) and fill with ingredients.
1. Twist the concentrate tube up out
of the mixing bowl.
2. Lift the front edge of the
concentrate container and pull out.
3. Lift the lid and fill with concentrate.
A
7. When placing the concentrate
container
Make sure the chute is close to
the condensation traps (A), as illustrated.
9.
(A).
(A).

Dispensing drink into cup, Coffee, Chocolate, etc.
1.Centre a cup on the drip tray.
2. Select a drink the lamp will flash.
3. Wait until the light stops flashing before removing the cup.
10.
5. OPERATION; Dispensing drink into cup Cafélino Trio

6. CLEANING: Cleaning once a day Cafélino Trio
Rinsing the mixing system:
The mixing bowl can be cleaned easily using the cleaning button.
We recommend you clean/rinse the entire mixing system at least once a day.
11.
1. Centre a large cup on the drip tray.
2. Press the cleaning button (1)
3. The machine starts by tapping valves
and then rinsing the mixer and mixer bowl.
1

(B)
12.
Disassemble blender system. Cleaning once a day.
6. CLEANING: Cleaning once a day
4. Loosen the mounting
plate.Turn the lever
counter clockwise (D) until
it stops.
(C)
(A)
(D)
5. Clean with a damp
cloth and wipe dry.
6. Wash these parts
A. Mixing bowl
B. Steam trap
C. Mixer
D. Mounting plate
1.Turn the lever(A)
counter clockwise. 2. Loosen the blender cup Pull straight out (B). 3. Loosen the mixer
(C) by pulling it
straight out.
Note: All parts must be dry before being remounted.
Reassemble the blender system.
7. Replace the mounting plate
by turning the lever (E) clock-
wise. CHECK the washers.
(E)
8. The level side of the mixer
motor shaft should line up
with the marking on the mixer
(F).
(F)
9. Mount the mixer, and press until you hear a
clicking sound. Follow the mixer's indicator,
arrow (G).
The mixer can only be mounted in this way.
(G)
10. Press in the blender cup
as shown (H) and lock
with the lever (I).
(H)
(I)

7. Programming. Cafélino Trio
13.
Recipe PROGRAMMING.
To open the menu, follow the instructions below. The pin code is 1000.
Remember to always confirm your selection by pressing button
1. Press button
2. Press button until the display reads Recipes.
3. Press button to open the menu. Display reads PIN code= IIII.
4. Press button once, and the cursor jumps to the next number.
5. Press button and the second number reads 0.
6. Confirm by pressing button .
Service mode:
Recipes
PIN code= IIII
PIN code= IIII
PIN code= I0II

7. Programming. Cafélino Trio
PROGRAMMING: using the pin code.
7. Press button and the third number reads 0.
8. Confirm by pressing button .
9. Press button and the fourth number reads 0.
10. Confirm by pressing button .
11. The display reads OK.
12. The display now shows drink = 1
PIN code= I00I
PIN code= I000
PIN code= I000
PIN ok
Select drink = 1
14.

7. Programming. Cafélino Trio
15.
13. select a drink by pressing button or button
Select drink 1
Select drink 2
Select drink 3
Select drink 4
14. Press button to select which drink to adjust
To set and adjust a recipe, see the table on page 16 - 19.
15. Press button för to open the menu. Display shows
16. To change recipe values, Press button Display shows.
17. Press button or to change recipe values
18. To confirm the new selection, press button.
19. Press button or to go to a new recipe value.
Repeat step 16 - 18 to adjust.
20. Press button to go back a level in the menu.
21. To return to the operating level, press button again.
22. Select a new drink and adjust recipe value.
Select drink = 1
Drink 1
start V1 Water 1
Drink 1
start V1 W 1 =
0,0
PROGRAMMING: adjust value of drinks

7. Programming. Recipe Cafélino Trio
16.
PROGRAMMING: adjust recipe values.
Adjust recipe values for drink 1
Drink 1 Start 1 Stop 1 Start 2 Stop 2
coffee
130ml
V1 0,0 5,7 7,0 7,5
V2
Ingred 1 0,2 1,4
Ingred 2
Ingred 3
Mixer 1
Mixer 2
Adjust recipe values for drink 2
Drink 2 Start 1 Stop 1 Start 2 Stop 2
cafe latte
130ml
V1 0,0 2,4 5,7 6,2
V2 2,5 4,7 8,2 8,6
Ingred 1 0,5 1,6
Ingred 2
Ingred 3 2,8 4,2
Mixer 1 0,3 6,1
Mixer 2 3,5 4,5

7. Programming. Recipe Cafélino Trio
17.
PROGRAMMING: adjust recipe values.
Adjust recipe values for drink 3
Drink 3 Start 1 Stop 1 Start 2 Stop 2
cappuccino
130ml
V1 5,0 7,4 10,7 11,2
V2 0,0 2,2 5,7 6,0
Ingred 1 5,3 6,4
Ingred 2
Ingred 3 0,3 1,2
Mixer 1 5,3 11,1
Mixer 2 0,3 6,4
Adjust recipe values for drink 4
Drink 4 Start 1 Stop 1 Start 2 Stop 2
chocolate
140ml
V1
V2 0,1 5,2 7,7 8,0
Ingred 1
Ingred 2 0,1 3,8
Ingred 3
Mixer 1
Mixer 2 0,3 8,0

8. Reset Cup counter. Cafélino Trio
18.
Cup counter:
The machine has a built-in Cup Counter that can be reset.
13
2
4
000
5
1. Take out the concentrate container. The display (5) shows 000 cups.
2. To reset the counter: Press button to setting Reset Counters.
3. Press button to reset the counter.
4. Confirm the new setting by pressing button .

19.
9. Storage / Transportation. Cafélino Trio
Long-term storage and transportation
1. Switch off the machine, unplug it and close the water tap.
2. The machine must not be stored in freezing temperatures, and all water must
removed befor long-term storage.
Emptying the water tank.
1. Switch off the machine and allow it to stand approx. one hour before empting the
water.
Note: Remember that the water is very hot while the machine is in operation.
2. Loosen the water hook-up (1) and unplug the power cord (2).
Water hook-up (1) Power connection (2)
Service plug (3)
Emptying of water tank

10. Dimension sketch. Cafélino Trio
20.