Coffee Queen CATER User manual

Servicemanual
YourDealer
COFFEE QUEEN
CATERSINGLE
S / EN
Rev100901

2.
1. Tableofcontentspage 2
2. General 3
3. Functiondescription 3
4. Start up 3
5. Overviewofcomponents 4
5. Overviewoperationbuttons 5
6. Indicationsbrewing 5
7. Installationand start 6
8. Operationinstructions,brewing 7-10
9. Maintenanceandcleaning 11-13
10. Important! 13
11. Dimension sketch 14
12. Programming 15-16
Adjustingquantity ofwater. - SERVICE 17
13. Errormessage 18
14. Facts 19
15. Spare parts lists20-21
16. Explodedviews 22-24
17. Contemplateduse and warnings 25
1. Table of contentsCater Single.

3.
2. General.Cater Single.
Coffee Queen Cater single
Wecongratulatetoyour choice of coffeebrewer.
Catersingleis equiped withfulland half brewfunction
andaseparateoutlet forhotwater.
Cateris delivered witha brew unit,servingstation
andfilterholder.
Coffee Queen AB is certified ISO 9001 and 14001
and therefore a minimal stress of the enviroment.
3. Function description
Coffeebrewerwithautomaticwater supply.
Itis also equippedwith a separateoutletfor hot water.
Brewingtakes place ina removable servingstation.
Brewing is carried out in paper filters.
Brew time = 5 - 6 min.
4. Start up
Turnonthemainswitch(A).
Themachinewillnow fill and startheating water.
A

4.
5. Overview of components. Cater Single.
Warning!
Themachinemustbeconnectedcorrectly for your safety.
Read the manual before using the machine.
Tap for
Hot water
Upper lid
Display
Handle
Serving
station
Level tube
ON/OFF-switch
Tap for
coffee
Drip tray insert
Drip tray
Filter holder
Programming
buttons

5. Overview operating buttons. Cater Single.
5.
6. Indications when brewing. Cater.
1/1 Brewing
1/2 Brewing
PAUSE / STOP
Whilemachine is brewing
Full brew
Display shows: see A
Whilemachine is brewing
Half brew
Display shows: see B
A
B
1/1 Brewing 1/2 Brewing
Fullbrew = 2,5litre Half brew = 1,25litre

6.
7. INSTALLATION AND START.Cater Single.
7.1.
Placethe brewer unitona flat,leveland waterproof surface.
7.2. Connecttocold waterfeedwithconnection tubesupplied.
Connectionto a closablevalveis recommended.
Water pressure shall be 14,5 - 72,5 PSI (1 - 5 bar)
for a correct operation
Water supply tothemachine is thecustomer’sresponsibility
accordingto instruction andadvicefrom the supplier.
In areas with high level lime problem, a descaling
filter should be mounted.
7.3. Electrical connection;
CAUTION! Connectthe plug toaseparate wallsocket.
230 V, 10 ampere.

8. Operating instructions. Brewing with coffee Cater Single.
7.
8.1. Starting up machine.
TurnontheswitchA.
Themachinestartsfilling water .
A
Placea filter inthefilter holder.
8.3. Place a filter in the filter holder.
Always use Coffee Queen´s recommended coffee filter
Filtertype 110mm filter Article no. 110110
8.2. Machine starts heating water.
Whilemachine is heatingthewater, display isblinking.
Whenwaterhasreached the righttemperature.
Displaywilllight up.
Machine is now ready to use.

8. Operating instructions. Brewing with coffee Cater Single.
8.
8.5. Place filter holder and serving station.
1. Placethefilterholder.(A).
2. Loosenupper lidB onthe serving
stationandthen place the
servingstation C. AB
C
8.4. Brewing: Add coffee.
Add coffee 115 - 135 gram,restaurant / catering
groundedcoffee).
Thisisrecommended for fullbrewing.
Make sure that the coffee is evenly spread.

8. Operating instructions. Brewing with coffee Cater Single.
9.
8.6. START BREWING.
1. Push button 1/1 for 2,5 litre.
1/1 Full brew 2,5 litre
1/2 Half brew 1,25 litre
3. STOP / PAUSE button
-Press button onceforstandby.
-Press button twiceto stop brewing.
To complete brewing, press ½ alt. 1/1.
TAPING HOT WATER
Recommended:
Nottapinghot water while
machineis brewing.
1/1
Fullbrew2,5 litre
1/2
Halfbrew 1,25 litre
PAUSE / STOP
2. When ”Brewing”is ready.
The ”Brewing” indicator
lamp will lit.

8.7. To keep temperature and aroma.
Putthe lid (A) backonthe serving station
immediatelyafterthebrewing.
(A)
Tips!
Preheatingofservingstations.
Filltheservingstation with hottapwaterone hourbeforebrewing.
Pourout water anddo abrewing.
8.8. Emptythefilter holder fromfilterandcoffee grounds
andcleanthefilterholder.
Machine is now ready for the next brew.
Some tips for best coffee quality
1. Donot change therecommended portion ofcoffee.
2. Donot mix freshlybrewedcoffee with oldcoffee.
3. Alwaysrinsethe serving stationbeforenextbrew.
8. Operating instructions. Brewing with coffee Cater Single.
10.

9. Maintenance and cleaning. Cater Single.
11.
NOTE!
Before each brewing.
Rinsetheserving stationwith fresh tapwater.
Each day.
Rinseservingstationandfiltreholder with hotwater.
Outside cleaning use a soft rag and liquid solution that
not prevent scratches.
CAUTION!
The machine should not be
submerged in water or been
washed in a dishwasher
Clean and dry this surfaces!
A
Each day.
Cleanthe bottom plate(A).
Cleanthespraynozzle(B) and the surroundingarea.
B
EACH DAY
When needed;
Cleanthespraynozzleshole.Ifnecessary loosen spray nozzle andclean/de-scaling

9. Maintenance and Cleaning. Cater Single.
12.
CLEANING OF SERVING STATION 2,5 LITRE.
Filltheserving station. (Fullbrewingwithout coffee andfilter).
Put1 tablespoon withcleaningpowder in theservingstation and
waitat least 15minutes.
Tapoff2/3ofthe cleaning solution.
Cleantheservingstationwith the following cleaningbrush.
IMPORTANT! Rinse the servingstationontheinside several times
withfreshtapwater.
Cleaning serving station
Dismounttheleveltubeandcleaniteveryweek
withtheenclosedbrush.
Turnoffthebiggerlid,andcleanthemixertube.
EACH WEEK.
Mixer tube
Options: Cleaning parts
Cleaning powdercan beorderedfrom yourretaildealer.Article no. 1104162
Cleaningbrush Article no. 1104231
Cleaningbrush,leveltube,mixertube Article no. 1103360

9. Maintenance and Cleaning. Cater Single.
NOTE!
Outwardly Cleaning of machine
Use a soft rag and liquid cleaning agent
to prevent scratches.
10. Important! Cater Single.
Important.
Donotmake any alterationstothemachine. Such measuresmaycausepersonal injury and
themachineto fail.
Themachineshouldstandona flat surfacesothatitwill function properly.
Themachine should beplaced on awater-proofsurface sothatany leakage iseasily noticeable.
Makesure there isnobendage ontheconnection tube whenmachine is pushedintoits place.
Thetubeconnections should beregularlychecked. Make surethatnoleakage has occurredin
connectionwithinstallation.
Donotleavethe machine unattendedwhileusing.Closewater connection when notusing
machine.
Themachinemust be disconnectedfromelectricalsupplybefore any maintenance.
All maintenance and installations must be done by authorized personel.
13.

14.
11. Dimension sketch. Cater Single.

15.
12. Programming. Adjustings. - SERVICE Cater Single.
1. Press buttons full brew and half brew at the same time
for 5 seconds. Buzzer beeps once.
Display shows: actual setting.
2. Adjust with the buttons;
full brew = (increase water temp.)
and
half brew = (decrease water temp.)
3. Confirm the new settings by pressing button Stop/Pause.
70°C = min. temperature.
96°C = max. temperature.
1. Press buttons full brew.
and Stop/Pause at the same time for 5
seconds until you hear 3 beeps.
Display shows: present setting.
2. Adjust with the buttons;
full brew = (increase)
and
half brew = (decrease)
3. Confirm the new settings by pressing
button Stop/Pause.
ADJUSTING OF WATER TEMP.
ADJUSTING OF WATER QUANTITY.
Adjust Signal
Off 6
25% 5
20% 4
15% 3
10% 2
5% 1
0% 0
-5% -1
-10% -2
-15% -3
-20% -4
-25% -5

16.
12. Programming. Adjustings. - SERVICE Cater Single.
ADJUST BREWING TIME. (Coffee ready).
1. Press buttons half brew and Stop/Pause att the
same time for 5 seconds until you hear 3 beeps.
Display shows: present setting.
2. Adjust with the buttons;
full brew = (increase) and
half brew = (decrease)
3. Confirm the new settings by pressing button
Stop/Pause.
Adjust Signal
Off 6
25% 5
20% 4
15% 3
10% 2
5% 1
0% 0
-5% -1
10% -2
-15% -3
-20% -4
-25% -5
CALIBRATE TEMP. SENSOR.
1. Press buttons full brew and half brew and
stop/pause att the same time for 5 seconds until
you hear 3 beeps.
Display shows: present setting.
2. Adjust with the buttons;
full brew = (increase) and
half brew = (decrease)
3. Confirm the new settings by pressing button
Stop/Pause.
Adjust Signal
98° 2
97° 1
96° 0
95° 1
94° 2
93° 3
92° 4
91° 5
OFF 6
NOTE! When calibrating the temperature sensor, you must
check the presenttemperature in watertank.

17.
12. Adjusting quantity of water. - SERVICE Cater.
This is to improve the water flow into filter holder.
Theflow of PDSvalve is setto 0.95 litre/minute. Depending onthe coarsenessand
amountofcoffeethat’s used whenbrewing,theflowmightneed adjustments to prevent
overflowinthefilterholder.
Adjusting quantity of water
1. Checkthewaterflow.
Thisshouldbe0,95L/minute.
AdjustPDS valve ifnecessary.Seefig.1.
Shall been done by an authorized installation engineer.

18.
13. Error message - SERVICE Cater Single.
Error message: Display shows: E1, E2, E3, E4.
LEVEL CONTROL
TEMPERATURE CONTROL
Display shows: E1 = Levelsensors shortelectrodis Cleanlevelsensor.
earthed,(GND) Changelevelsensor.
butnotlevelsensorslong electrod. Cables wronglycoupled.
Display shows: E4 = Fillingtime too long. Restartmachine.
Lowpressureon water.
Water tapnot open.
Display shows: E2 = Temp.sensor out ofrange 5°C - 105°C.
Temp.sensorfailure. Changetemp. sensor.
Cable is loose. Connectcable.
Display shows: E3 = Heatingtime toolong. Restartmachine.
Solid state defect. Changesolid state.
Elementdefect. Changeheatingelement.
Highlimitcontrol defect.
IMPORTANT! All maintenance andinstallationsmustbe done ofan
authorizedtechnician.

14. Facts. Cater Single.
Facts:
Height 675 mm
Width 205 mm
Depth 420 mm
Weight -
Tankvolume 5litre
Electricity 230 V 1N / 2200 W
Waterconnection ½”outside thread
Capacity:
6 minutes to brew 17 cups
20L/ hour
19.

Pos. nr.Art. no. Description Amount per unit
Valid spare part list for cater page 21
1
21203531 Tank 1
3120422 Air Inlet Plastic 1.8L PC 1
41201924 FAUCET, CATER COPPER 1
51604203 SolidState 1
6220221 High Limit switch short 1
-1206505 Gasket for HL Switch Fiber 1
7120620-01 Inletvalvesingle0,95l/min. 1
8160801-04 Rocker switch 1
9160570 Inlet plug and socket 1
10 160565 Mainsupplycable/Europe 1
10 160566 Mainsupplycable/SouthAfrica 1
10 160567 Mainsupplycable/Great Britain 1
11 1031801 Spray nozzle 1
12 140339 Clamp for hose 16.4mm Spring Steel 6
13 1102011Brew basket 1.8L 1
14 1103303 Serving station 2.5L 1
15 150501 Drainage hose, L= 600 mm (sales by metre) 1
16 150501 Silicon Hose Cold Long, L= 390 mm (sales by metre) 1
17 1603863 Membrane switch cater singel 1
18 1603865 Overlay cater with hole 1
19 1603866 Overlay cater without hole 1
20 1403400 Nylon plug for drainage hose 1
21 1206123 Nonreturnvalve 1
22 150541 Inlet hose(water main) 3/4” x 1/2” 1
23 1031646 Electronic box 1
24 160193 Regulator PDS 1
25 1561009 Silicone tube braided 1
26 1364004 Clamp 16mm 1
Valid spare part list for cater page 22
30 1601311Element 2200W / 230V HVASUS 316 1
31 1206123 Nonreturnvalve1.8LABS 1
32 1206504 Gasket, element 2
33 1605303 Sensor pin, long 1
34 1031504 Outlet hose 1
35 1031506 Hose,venting 1
36 1205305 Sensor pin, short 1
37 1605362 Double Seal Level Sensor 1
38 1031505 Silicone hose, hot water 1
39 160538-03 Plug 1
40 711000 NTC thermistor 1
41 1605361 Seal for NTC Silicon 1
42 1206587 Gasket, lid tank 1
15. Spare parts list. Cater Single
20.