Coleman TCHE36S43S1 Quick start guide

TECHNICAL GUIDE
HORIZONTAL DISCHARGE
SPLIT SYSTEM
AIR CONDITIONERS
14 SEER – R-410A – 3 PHASE
3, 4 NOMINAL TONS
MODELS: TCHE36, 48
Due to continuous product improvement, specifications
are subject to change without notice.
Visit us on the web at
www.simplygettingthejobdone.com and
www.colemanac.com
Additional rating information can be found at
www.ahridirectory.org
WARRANTY SUMMARY*
Standard 1-Year limited parts warranty.
Standard 5-Years limited compressor warranty.
*Does not apply to Internet sales.
See Limited Warranty certificate in User's Information Manual for details.
FOR INSTALLATION IN ALL US REGIONS AND CANADA
Installation Allowed
®
5371957-CTG-D-0120
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
DESCRIPTION
The 14 SEER TCHE Series condensing unit is the outdoor part
of a versatile system of air conditioning. Optimized for the new
14 SEER Regional Minimum Efficiency and the high EER
required in the Southwest US, these outdoor units are specifi-
cally designed to be matched with Coleman indoor coils, fur-
naces, and air handlers to provide a complete system solution.
These remarkably compact units require only minimal service
and airflow clearances, allowing them to be positioned as close
as six inches (6") from the wall. This design allows the unit to be
located virtually anywhere – on the ground, roof, balcony, or
mounted to an outside wall. When installation footprint is lim-
ited, these units can be stacked two-high using the approved
stacking kit.
FEATURES
•Performance - Optimized for the US DOE Southwest
Region and valid for installation in all US DOE Regions.
•Small Footprint - Compact “slim-line” design allows for easy
installation in tight spaces. Units can be stacked two-high
with approved stacking kit.
•WhisperDrive™ System - The combination of a swept-wing
fan, rigid base pan, isolated compressor compartment, and
quiet scroll compressor reduce sound to as low as 70 dBA.
•Low Operating Sound Levels - The swept-wing condenser
fan in blow-through configuration provides for whisper-quiet
operation by allowing air to flow smoothly and efficiently
across the fan blades.
•Quality Condenser Coils - The coil is constructed of alumi-
num microchannel tubing and enhanced aluminum fins for
compact size and increased efficiency.
•Environmentally Friendly Refrigerant - The next genera-
tion refrigerant R-410A delivers environmentally friendly per-
formance with zero ozone depletion.
•Durable Cabinet - Heavy-gauge steel cabinet and tubular
base rails provide added support.
•Aesthetic Appearance - Powder paint “Champagne” color
provides an attractive retail finish.
•Agency Listed - Safety certified by CSA to UL 1995 / CSA
22.2. Performance certified to ANSI/AHRI Standard 210/240
in accordance with the Unitary Small Equipment certification
program.
• Other Features:
– Factory installed filter drier
– High pressure and low pressure switches
– Accumulator and crankcase heater in all sizes
– Up to 200’ line set out of the box
– Zero lot line - only 6” minimum clearance from structure

5371957-CTG-D-0120
2 Johnson Controls Ducted Systems
LIST OF SECTIONS
DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
NOMENCLATURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
PHYSICAL AND ELECTRICAL DATA . . . . . . . . . . . . . . . . . . . . . . . 3
DIMENSIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
SYSTEM CHARGE FOR VARIOUS MATCHED SYSTEMS . . . . . . . 4
COOLING CAPACITY - With Air Handler Coils . . . . . . . . . . . . . . . 4
COOLING CAPACITY - Upflow, Downflow &
Horizontal Furnaces and Coils (Coil Only Ratings) . . . . . . . . . . . 4
COOLING CAPACITY - With High Efficiency Motor Furnaces . . . 5
APPLICATIONS AND ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . 8
SOUND POWER RATINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
MECHANICAL SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 9
TYPICAL INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
MOUNTING HOLE GRAPHIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
TYPICAL FIELD WIRING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
PERFORMANCE DATA - 3 TON . . . . . . . . . . . . . . . . . . . . . . . . . . 11
PERFORMANCE DATA - 4 TON . . . . . . . . . . . . . . . . . . . . . . . . . . 13
NOMENCLATURE
BRAND TT= Factory Branded
PRODUCT TYPE CC= Air Conditioner
(US Northern or Southeast Region)
AIRFLOW HH= Horizontal Discharge
NOMINAL
SERIES EFFICIENCY
AND STAGING EE= 14 SEER High EER
(US DOE Southwest Region)
NOMINAL
UNIT CAPACITY
(MBH) 36 36 = 3 Ton
48 = 4 Ton
STAGING SS = Single Stage Compressor
REFRIGERANT 44 = R-410A Refrigerant
VOLTAGE
(Voltage-Phase-Hertz) 33= 208/230-3-60
4= 460-3-60
CONNECTION TYPE SS = Sweat Connect
GENERATION
(MAJOR REVISION) 11= 1st Gen
2= 2nd Gen
etc
STYLE LETTER
(MINOR REVISION)
NOT USED
FOR ORDERING
A
A= Style A
B= Style B
etc

5371957-CTG-D-0120
Johnson Controls Ducted Systems 3
All dimensions are in inches and are subject to change without notice.
Overall height is from bottom of mounting feet to top of unit.
Overall length and width include mounting feet and screw heads.
PHYSICAL AND ELECTRICAL DATA
MODEL TCHE36S43S1 TCHE48S43S1 TCHE36S44S1 TCHE48S44S1
Unit Supply Voltage 208-230V, 3 60Hz 460V, 3 60Hz
Normal Voltage Range 1
1. Rated in accordance with AHRI Standard 110-2012, utilization range “A”.
187 to 252 432 to 504
Minimum Circuit Ampacity 12.5 18.5 8 8.56
Max. Overcurrent Device Amps 2
2. Dual element fuses or HACR circuit breaker. Maximum allowable overcurrent protection.
20 30 15 15
Min. Overcurrent Device Amps 3
3. Dual element fuses or HACR circuit breaker. Minimum recommended overcurrent protection.
15 20 15 15
Compressor Amps Type Scroll Scroll Scroll Scroll Rated Load 9.0 13.8 5.8 6.2
Locked Rotor 71.0 83.1 38.0 41.0
Crankcase Heater Yes Yes Yes Yes
Factory External Discharge Muffler No No No No
Factory External Check Valve No No No No
HS Kit Required with TXV4
4. See Hard Start Kit Accessory Installation Manual for Hard Start Kit part number for each model.
No No No No
Fan Diameter Inches 23 23 23 23
Fan Motor
Rated HP 1/4 1/4 1/4 1/4
Rated Load Amps 1.3 1.3 0.8 0.8
Nominal RPM 850 850 850 850
Nominal CFM 3200 3050 3200 3050
Coil Face Area Sq. Ft. 11.96 13.96 11.96 13.96 Rows Deep 1111
Fins / Inch 23 23 23 23
Refrigerant Lines5
5. When more than 50 feet of interconnecting tubing and more than 30 feet of vertical lift is used, consult the Application Data (part number 247077).
For long-line applications, interconnecting lines over 100 feet must be installed with liquid line solenoid.
Max. Length 200 200 200 200
Max. Lift 65 65 65 65
Max. Drop 150 150 150 150
Liquid Line Set OD (Field Installed) 3/8 3/8 3/8 3/8
Vapor Line Set OD (Field Installed) 3/4 7/8 3/4 7/8
Unit Charge (Lbs. - Oz.) 6
6. The Unit Charge is correct for the outdoor unit, smallest matched indoor unit, and 15 feet of refrigerant tubing. For tubing lengths other than 15 feet,
add or subtract the amount of refrigerant, using the difference in length multiplied by the per foot value.
6 - 6 7 - 4 6 - 6 7 - 4
Charge Per Foot, Oz. 0.62 0.67 0.62 0.67
Operating Weight Lbs. 200 225 200 225
B
C
A
DIMENSIONS
Unit
Model
Dimensions
(Inches) Refrigerant Connection Service Valve Size
A B C Liquid Vapor
TCHE36S4(3,4)S1 37-1/4 20 45 3/8 3/4
TCHE48S4(3,4)S1 43-1/4 20 45 7/8

5371957-CTG-D-0120
4 Johnson Controls Ducted Systems
PROCEDURES:
1. Check the Factory Unit Charge listed on the unit nameplate to verify the refrigerant charge for the outdoor unit, the smallest matched indoor unit,
and the 15 feet of interconnecting lineset.
2. Verify the indoor metering device and additional charge required for the specific matched indoor unit in the system using the above table.
3. Add additional charge for the amount of interconnecting lineset greater than 15 feet at the rate specified in the Physical and Electrical Table.
4. For installations requiring additional charge, weigh in refrigerant for the specific matching indoor unit and actual lineset length.
5. Once the charge adders for matched indoor unit and for lineset have been weighed in, verify the system operation against the temperatures and pressures in
the Charging Chart for the outdoor unit. Locate Charging Charts on the outdoor unit and also in the Service Data Application Guide on
www.simplygettingthejobdone.com. Follow the Subcool or Superheat charging procedure in the Installation Manual according to the type of indoor metering
device in the system, and allow ten minutes after each charge adjustment for the system operation to stabilize. Record the charge adjustment made to match
the Charging Chart.
6. Permanently stamp the unit data plate with the TOTAL SYSTEM CHARGE defined as follows: TOTAL SYSTEM CHARGE = Base Charge (as shipped) +
charge adder for matched indoor unit + charge adder for actual lineset length + charge adjustments to match the Charging Chart.
— = Not applicable.
MP ModularAir Handlers use Coil Only Ratings.
— = Not Applicable.
MP ModularAir Handlers use Coil Only Ratings.
PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings.
SYSTEM CHARGE FOR VARIOUS MATCHED SYSTEMS
Outdoor Unit TCHE36S4(3,4)S1 TCHE48S4(3,4)S1
Required TXV 1,2BA2 BA2
Indoor Unit 3,4,5 Additional Charge, Oz
FC38C 0 –
FC49D – 0
Some of the combinations shown in the above System Charge table require Advanced Main Air Circulating Fan indoor product. For approved coil
only matches, please see the “COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils” table.
FOOTNOTES:
1. For applications requiring a TXV use S1-1TVM*** series kit.
2. ATXV kit must be used with these indoor units to obtain system performance.
3. Systems matched with furnaces or air handlers not equipped with blower-off delays may require 60 second time delay.
4. CF and FC coils cannot be used in horizontal applications.
5. Charge adders shown above do not indicate that coils are rated for every application. Refer to Performance Data Tables for actual performance for specified
system matches. Obtain certified system ratings from www.ahridirectory.org.
COOLING CAPACITY - With Air Handler Coils
UNIT
MODEL
AIR HANDLER COIL
MODEL1
COOLING
MODEL WIDTH RATED
CFM NET MBH SEER EER
TOTAL SENS.
TCHE36S4(3,4)S1 ME16CN21 21.0 FC38C 1200 36.00 27.20 16.00 13.00
TCHE36S4(3,4)S1 MVC16CN21 21.0 FC38C 1200 35.80 27.20 15.50 12.75
TCHE36S44S1 ME12CN41 21.0 FC38C 1250 36.00 28.40 16.00 13.00
TCHE36S44S1 ME16CN41 21.0 FC38C 1100 36.00 26.80 16.00 13.00
TCHE48S4(3,4)S1 ME14DN21 24.5 FC49D 1425 46.50 34.60 15.10 12.50
TCHE48S4(3,4)S1 ME20DN21 24.5 FC49D 1425 46.50 34.60 15.50 12.50
TCHE48S44S1 ME20DN41 24.5 FC49D 1400 46.50 34.80 15.25 12.50
TCHE48S4(3,4)S1 MVC14DN21 24.5 FC49D 1175 45.50 31.80 15.50 12.75
TCHE48S4(3,4)S1 MVC20DN21 24.5 FC49D 1375 46.50 34.20 15.50 12.75
Rated in accordance with DOE test procedures (Federal Register 12-27-79 and 3-18-88) and ANSI/AHRI Standard 210/240.
Cooling MBH based on 80°F entering air temperature, 50% RH (Relative Humidity), and rated air flow.
EER (Energy Efficiency Ratio) is the total cooling output in BTUs at 95°F outdoor ambient divided by the total electric power in watt-hours at those conditions.
SEER (Seasonal Energy Efficiency Ratio) is the total cooling output in BTUs during a normal annual usage period for cooling divided by the total
electric power input in watt-hours during the same period.
1. CM coils available with a factory installed horizontal drain pan. See price pages for specific model number.
COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils (Coil Only Ratings)
UNIT MODEL
COIL CFM RANGE
(MIN.-MAX.)
COOLING
MODEL WIDTH RATED
CFM NET MBH SEER 1EER
TOTAL SENS.
TCHE36S4(3,4)S1 FC38C 21.0 1000 - 1400 1200 35.6 27.2 14.00 12.20
FC38C 21.0 1000 - 1400 1200 35.6 27.2 14.00 12.20
TCHE48S4(3,4)S1 FC49D 21.0 1400 - 1800 1425 46.0 33.8 14.00 12.15
FC49D 21.0 1400 - 1800 1425 46.0 33.8 14.00 12.15
For rated condition information, see the footnotes below the System Capacity - Single Piece and Modular Air Handlers table.
1. Systems matched with furnaces or air handlers not equipped with blower-off delays may require 60 second time delay.

5371957-CTG-D-0120
Johnson Controls Ducted Systems 5
COOLING CAPACITY - With High Efficiency Motor Furnaces1
UNIT
MODEL
FURNACE COIL
MODEL2
COOLING
MODEL WIDTH RATED
CFM NET MBH SEER EER
TOTAL SENS.
TCHE36S4(3,4)S1 TL8E080C16UH11 21.0 FC38C 1125 36.0 26.8 15.75 13.00
TCHE36S4(3,4)S1 TL8E100C20UH11 21.0 FC38C 1050 36.0 26.2 16.00 13.00
TCHE36S4(3,4)S1 TL9E060B12UH11 17.5 FC38C 1050 35.6 26.0 15.00 12.50
TCHE36S4(3,4)S1 TL9E080C16UH11 21.0 FC38C 1075 35.8 26.2 15.75 13.00
TCHE36S4(3,4)S1 TL9E100C20UH11 21.0 FC38C 1125 36.0 26.8 16.00 13.00
TCHE36S4(3,4)S1 TM8E080B12MP11 17.5 FC38C 1050 35.8 26.0 15.50 12.75
TCHE36S4(3,4)S1 TM8E080C16MP11 21.0 FC38C 1100 36.0 26.6 16.00 13.00
TCHE36S4(3,4)S1 TM8E080C20MP11 21.0 FC38C 1250 36.0 27.8 16.00 13.00
TCHE36S4(3,4)S1 TM8E100B12MP11 17.5 FC38C 1100 36.0 26.6 15.50 12.75
TCHE36S4(3,4)S1 TM8E100C16MP11 21.0 FC38C 1100 36.0 26.6 15.75 13.00
TCHE36S4(3,4)S1 TM8E100C20MP11 21.0 FC38C 1250 36.0 27.8 16.00 13.00
TCHE36S4(3,4)S1 TM8E120C16MP11 21.0 FC38C 1100 36.0 26.6 15.75 13.00
TCHE36S4(3,4)S1 TM8E120C20MP11 21.0 FC38C 1275 36.0 28.0 15.75 13.00
TCHE36S4(3,4)S1 TM8V080C16MP11C 21.0 FC38C 1200 35.6 27.0 15.10 12.50
TCHE36S4(3,4)S1 TM8V100C16MP11C 21.0 FC38C 1200 35.6 27.0 15.10 12.50
TCHE36S4(3,4)S1 TM8V100C20MP11C 21.0 FC38C 1150 35.8 26.8 15.50 13.00
TCHE36S4(3,4)S1 TM8V120C20MP11C 21.0 FC38C 1150 35.8 26.8 15.50 13.00
TCHE36S4(3,4)S1 TM8X080B12MP11 17.5 FC38C 975 35.4 25.0 15.50 13.00
TCHE36S4(3,4)S1 TM8X080C16MP11 21.0 FC38C 1200 35.8 27.2 15.50 12.75
TCHE36S4(3,4)S1 TM8X100C16MP11 21.0 FC38C 1200 35.8 27.2 15.50 12.75
TCHE36S4(3,4)S1 TM8X100C20MP11 21.0 FC38C 1200 35.6 27.0 15.25 12.75
TCHE36S4(3,4)S1 TM8X120C20MP11 21.0 FC38C 1200 35.6 27.0 15.25 12.75
TCHE36S4(3,4)S1 TM8Y080B12MP11 17.5 FC38C 975 35.4 25.0 15.50 13.00
TCHE36S4(3,4)S1 TM8Y080C16MP11 21.0 FC38C 1200 35.8 27.2 15.50 12.75
TCHE36S4(3,4)S1 TM8Y100C16MP11 21.0 FC38C 1200 35.8 27.2 15.50 12.75
TCHE36S4(3,4)S1 TM8Y100C20MP11 21.0 FC38C 1200 35.6 27.0 15.25 12.75
TCHE36S4(3,4)S1 TM8Y120C20MP11 21.0 FC38C 1200 35.6 27.0 15.25 12.75
TCHE36S4(3,4)S1 TM9E060B12MP11 17.5 FC38C 950 35.0 24.8 15.25 13.00
TCHE36S4(3,4)S1 TM9E060B12MP12 17.5 FC38C 1075 35.6 26.0 15.00 12.50
TCHE36S4(3,4)S1 TM9E080B12MP12 17.5 FC38C 1075 35.8 26.2 15.50 12.75
TCHE36S4(3,4)S1 TM9E080C16MP11 21.0 FC38C 975 35.4 25.0 15.75 13.00
TCHE36S4(3,4)S1 TM9E080C16MP12 21.0 FC38C 1075 35.8 26.2 15.75 13.00
TCHE36S4(3,4)S1 TM9E080C20MP12 21.0 FC38C 1225 36.0 27.6 16.00 13.00
TCHE36S4(3,4)S1 TM9E100C16MP11 21.0 FC38C 1200 35.6 27.0 15.25 12.75
TCHE36S4(3,4)S1 TM9E100C16MP12 21.0 FC38C 1075 36.0 26.4 15.75 13.00
TCHE36S4(3,4)S1 TM9E100C20MP11 21.0 FC38C 1200 35.6 27.0 15.25 12.75
TCHE36S4(3,4)S1 TM9E100C20MP12 21.0 FC38C 1200 36.0 27.4 16.00 13.00
TCHE36S4(3,4)S1 TM9V080C16MP11C 21.0 FC38C 1175 35.8 27.0 15.50 12.75
TCHE36S4(3,4)S1 TM9V100C16MP11C 21.0 FC38C 1175 35.8 27.0 15.50 12.75
TCHE36S4(3,4)S1 TM9V100C20MP11C 21.0 FC38C 1200 35.6 27.0 15.25 12.75
TCHE36S4(3,4)S1 TM9Y060B12MP11 17.5 FC38C 950 35.0 24.8 15.25 13.00
TCHE36S4(3,4)S1 TM9Y080C16MP11 21.0 FC38C 975 35.4 25.0 15.75 13.00
TCHE36S4(3,4)S1 TM9Y100C16MP11 21.0 FC38C 1200 35.6 27.0 15.25 12.75
TCHE36S4(3,4)S1 TM9Y100C20MP11 21.0 FC38C 1200 35.6 27.0 15.25 12.75
TCHE36S4(3,4)S1 TMLE080B12MP11 17.5 FC38C 1050 35.8 26.0 15.50 12.75
TCHE36S4(3,4)S1 TMLE080C16MP11 21.0 FC38C 1100 36.0 26.6 16.00 13.00
TCHE36S4(3,4)S1 TMLE080C20MP11 21.0 FC38C 1250 36.0 27.8 16.00 13.00
TCHE36S4(3,4)S1 TMLE100B12MP11 17.5 FC38C 1100 36.0 26.6 15.50 12.75
TCHE36S4(3,4)S1 TMLE100C16MP11 21.0 FC38C 1100 36.0 26.6 15.75 13.00
TCHE36S4(3,4)S1 TMLE100C20MP11 21.0 FC38C 1250 36.0 27.8 16.00 13.00
TCHE36S4(3,4)S1 TMLE120C16MP11 21.0 FC38C 1100 36.0 26.6 15.75 13.00
TCHE36S4(3,4)S1 TMLE120C20MP11 21.0 FC38C 1275 36.0 28.0 15.75 13.00

5371957-CTG-D-0120
6 Johnson Controls Ducted Systems
TCHE36S4(3,4)S1 TMLV080C16MP11C 21.0 FC38C 1200 35.6 27.0 15.10 12.50
TCHE36S4(3,4)S1 TMLV100C16MP11C 21.0 FC38C 1200 35.6 27.0 15.10 12.50
TCHE36S4(3,4)S1 TMLV100C20MP11C 21.0 FC38C 1150 35.8 26.8 15.50 13.00
TCHE36S4(3,4)S1 TMLV120C20MP11C 21.0 FC38C 1150 35.8 26.8 15.50 13.00
TCHE36S4(3,4)S1 TMLX080B12MP11 17.5 FC38C 975 35.4 25.0 15.50 13.00
TCHE36S4(3,4)S1 TMLX080C16MP11 21.0 FC38C 1200 35.8 27.2 15.50 12.75
TCHE36S4(3,4)S1 TMLX100C16MP11 21.0 FC38C 1200 35.8 27.2 15.50 12.75
TCHE36S4(3,4)S1 TMLX100C20MP11 21.0 FC38C 1200 35.6 27.0 15.25 12.75
TCHE36S4(3,4)S1 TMLX120C20MP11 21.0 FC38C 1200 35.6 27.0 15.25 12.75
TCHE36S4(3,4)S1 TP9C080C16MP12C 21.0 FC38C 1175 35.8 27.0 15.50 12.75
TCHE36S4(3,4)S1 TP9C100C16MP12C 21.0 FC38C 1175 35.8 27.0 15.50 12.75
TCHE36S4(3,4)S1 TP9C100C20MP12C 21.0 FC38C 1200 35.6 27.0 15.25 12.75
TCHE36S4(3,4)S1 TPLC080C16MP12C 21.0 FC38C 1200 35.6 27.0 15.10 12.50
TCHE36S4(3,4)S1 TPLC100C16MP12C 21.0 FC38C 1200 35.6 27.0 15.10 12.50
TCHE36S4(3,4)S1 TPLC100C20MP12C 21.0 FC38C 1150 35.8 26.8 15.50 13.00
TCHE36S4(3,4)S1 TPLC120C20MP12C 21.0 FC38C 1150 35.8 26.8 15.50 13.00
TCHE36S4(3,4)S1 CP9C080C16MP12C 21.0 FC38C 1175 35.8 27.0 15.50 12.75
TCHE36S4(3,4)S1 CP9C100C16MP12C 21.0 FC38C 1175 35.8 27.0 15.50 12.75
TCHE36S4(3,4)S1 CP9C100C20MP12C 21.0 FC38C 1200 35.6 27.0 15.25 12.75
TCHE36S4(3,4)S1 CPLC080C16MP12C 21.0 FC38C 1200 35.6 27.0 15.10 12.50
TCHE36S4(3,4)S1 CPLC100C16MP12C 21.0 FC38C 1200 35.6 27.0 15.10 12.50
TCHE36S4(3,4)S1 CPLC100C20MP12C 21.0 FC38C 1150 35.8 26.8 15.50 13.00
TCHE36S4(3,4)S1 CPLC120C20MP12C 21.0 FC38C 1150 35.8 26.8 15.50 13.00
TCHE48S4(3,4)S1 TL8E080C16UH11 21.0 FC49D 1250 45.5 32.6 15.00 12.25
TCHE48S4(3,4)S1 TL8E100C20UH11 21.0 FC49D 1225 45.5 32.4 15.25 12.50
TCHE48S4(3,4)S1 TL9E080C16UH11 21.0 FC49D 1225 45.5 32.4 14.75 12.25
TCHE48S4(3,4)S1 TL9E100C20UH11 21.0 FC49D 1400 46.5 34.6 15.00 12.25
TCHE48S4(3,4)S1 TM8E080C16MP11 21.0 FC49D 1250 45.5 32.6 15.00 12.25
TCHE48S4(3,4)S1 TM8E080C20MP11 21.0 FC49D 1225 45.5 32.4 15.00 12.50
TCHE48S4(3,4)S1 TM8E100C16MP11 21.0 FC49D 1275 46.0 33.2 14.75 12.25
TCHE48S4(3,4)S1 TM8E100C20MP11 21.0 FC49D 1225 45.5 32.4 15.00 12.50
TCHE48S4(3,4)S1 TM8E120C16MP11 21.0 FC49D 1275 46.0 33.2 15.00 12.25
TCHE48S4(3,4)S1 TM8E120C20MP11 21.0 FC49D 1250 45.5 32.6 15.00 12.50
TCHE48S4(3,4)S1 TM8E130D20MP11 24.5 FC49D 1250 45.5 32.6 15.00 12.50
TCHE48S4(3,4)S1 TM8V080C16MP11C 21.0 FC49D 1425 46.0 34.4 14.25 12.00
TCHE48S4(3,4)S1 TM8V080C16MP12C 21.0 FC49D 1200 45.5 32.2 14.75 12.25
TCHE48S4(3,4)S1 TM8V100C16MP11C 21.0 FC49D 1425 46.0 34.4 14.25 12.00
TCHE48S4(3,4)S1 TM8V100C16MP12C 21.0 FC49D 1200 45.5 32.2 14.75 12.25
TCHE48S4(3,4)S1 TM8V100C20MP11C 21.0 FC49D 1425 46.0 34.2 15.00 12.50
TCHE48S4(3,4)S1 TM8V100C20MP12C 21.0 FC49D 1225 45.5 32.4 15.00 12.50
TCHE48S4(3,4)S1 TM8V120C20MP11C 21.0 FC49D 1425 46.0 34.2 15.00 12.50
TCHE48S4(3,4)S1 TM8V120C20MP12C 21.0 FC49D 1225 45.5 32.4 15.00 12.50
TCHE48S4(3,4)S1 TM8X080C16MP11 21.0 FC49D 1400 46.0 34.0 14.75 12.25
TCHE48S4(3,4)S1 TM8X100C16MP11 21.0 FC49D 1400 46.0 34.0 14.75 12.25
TCHE48S4(3,4)S1 TM8X100C20MP11 21.0 FC49D 1425 46.5 34.6 15.10 12.50
TCHE48S4(3,4)S1 TM8X120C20MP11 21.0 FC49D 1425 46.5 34.6 15.10 12.50
TCHE48S4(3,4)S1 TM8Y080C16MP11 21.0 FC49D 1400 46.0 34.0 14.75 12.25
TCHE48S4(3,4)S1 TM8Y100C16MP11 21.0 FC49D 1400 46.0 34.0 14.75 12.25
TCHE48S4(3,4)S1 TM8Y100C20MP11 21.0 FC49D 1425 46.5 34.6 15.10 12.50
TCHE48S4(3,4)S1 TM8Y120C20MP11 21.0 FC49D 1425 46.5 34.6 15.10 12.50
TCHE48S4(3,4)S1 TM9E080C16MP12 21.0 FC49D 1250 45.5 32.6 14.75 12.25
TCHE48S4(3,4)S1 TM9E080C20MP12 21.0 FC49D 1200 45.5 32.0 15.00 12.50
COOLING CAPACITY - With High Efficiency Motor Furnaces1(Continued)
UNIT
MODEL
FURNACE COIL
MODEL2
COOLING
MODEL WIDTH RATED
CFM NET MBH SEER EER
TOTAL SENS.

5371957-CTG-D-0120
Johnson Controls Ducted Systems 7
TCHE48S4(3,4)S1 TM9E100C16MP11 21.0 FC49D 1425 46.0 34.4 14.25 11.75
TCHE48S4(3,4)S1 TM9E100C16MP12 21.0 FC49D 1250 45.5 32.6 14.75 12.25
TCHE48S4(3,4)S1 TM9E100C20MP11 21.0 FC49D 1400 46.0 34.0 15.00 12.50
TCHE48S4(3,4)S1 TM9E100C20MP12 21.0 FC49D 1400 46.5 34.6 15.00 12.50
TCHE48S4(3,4)S1 TM9E120D20MP11 24.5 FC49D 1400 46.5 34.4 15.10 12.50
TCHE48S4(3,4)S1 TM9E120D20MP12 24.5 FC49D 1200 45.5 32.0 15.00 12.50
TCHE48S4(3,4)S1 TM9V080C16MP12C 21.0 FC49D 1300 45.5 32.8 14.50 12.00
TCHE48S4(3,4)S1 TM9V100C16MP12C 21.0 FC49D 1175 45.5 32.0 15.00 12.50
TCHE48S4(3,4)S1 TM9V100C20MP11C 21.0 FC49D 1350 46.0 33.6 14.75 12.25
TCHE48S4(3,4)S1 TM9V100C20MP12C 21.0 FC49D 1225 45.5 32.4 14.75 12.25
TCHE48S4(3,4)S1 TM9V120D20MP11C 24.5 FC49D 1375 46.0 33.8 15.10 12.50
TCHE48S4(3,4)S1 TM9V120D20MP12C 24.5 FC49D 1200 45.5 32.0 15.10 12.50
TCHE48S4(3,4)S1 TM9Y100C16MP11 21.0 FC49D 1425 46.0 34.4 14.25 11.75
TCHE48S4(3,4)S1 TM9Y100C20MP11 21.0 FC49D 1400 46.0 34.0 15.00 12.50
TCHE48S4(3,4)S1 TM9Y120D20MP11 24.5 FC49D 1400 46.5 34.4 15.10 12.50
TCHE48S4(3,4)S1 TMLE080C16MP11 21.0 FC49D 1250 45.5 32.6 15.00 12.25
TCHE48S4(3,4)S1 TMLE080C20MP11 21.0 FC49D 1225 45.5 32.4 15.00 12.50
TCHE48S4(3,4)S1 TMLE100C16MP11 21.0 FC49D 1275 46.0 33.2 14.75 12.25
TCHE48S4(3,4)S1 TMLE100C20MP11 21.0 FC49D 1225 45.5 32.4 15.00 12.50
TCHE48S4(3,4)S1 TMLE120C16MP11 21.0 FC49D 1275 46.0 33.2 15.00 12.25
TCHE48S4(3,4)S1 TMLE120C20MP11 21.0 FC49D 1250 45.5 32.6 15.00 12.50
TCHE48S4(3,4)S1 TMLE130D20MP11 24.5 FC49D 1250 45.5 32.6 15.00 12.50
TCHE48S4(3,4)S1 TMLV080C16MP11C 21.0 FC49D 1425 46.0 34.4 14.25 12.00
TCHE48S4(3,4)S1 TMLV080C16MP12C 21.0 FC49D 1200 45.5 32.2 14.75 12.25
TCHE48S4(3,4)S1 TMLV100C16MP11C 21.0 FC49D 1425 46.0 34.4 14.25 12.00
TCHE48S4(3,4)S1 TMLV100C16MP12C 21.0 FC49D 1200 45.5 32.2 14.75 12.25
TCHE48S4(3,4)S1 TMLV100C20MP11C 21.0 FC49D 1425 46.0 34.2 15.00 12.50
TCHE48S4(3,4)S1 TMLV100C20MP12C 21.0 FC49D 1225 45.5 32.4 15.00 12.50
TCHE48S4(3,4)S1 TMLV120C20MP11C 21.0 FC49D 1425 46.0 34.2 15.00 12.50
TCHE48S4(3,4)S1 TMLV120C20MP12C 21.0 FC49D 1225 45.5 32.4 15.00 12.50
TCHE48S4(3,4)S1 TMLX080C16MP11 21.0 FC49D 1400 46.0 34.0 14.75 12.25
TCHE48S4(3,4)S1 TMLX100C16MP11 21.0 FC49D 1400 46.0 34.0 14.75 12.25
TCHE48S4(3,4)S1 TMLX100C20MP11 21.0 FC49D 1425 46.5 34.6 15.10 12.50
TCHE48S4(3,4)S1 TMLX120C20MP11 21.0 FC49D 1425 46.5 34.6 15.10 12.50
TCHE48S4(3,4)S1 TP9C080C16MP13C 21.0 FC49D 1300 45.5 32.8 14.50 12.00
TCHE48S4(3,4)S1 TP9C100C16MP13C 21.0 FC49D 1175 45.5 32.0 15.00 12.50
TCHE48S4(3,4)S1 TP9C100C20MP12C 21.0 FC49D 1350 46.0 33.6 14.75 12.25
TCHE48S4(3,4)S1 TP9C100C20MP13C 21.0 FC49D 1225 45.5 32.4 14.75 12.25
TCHE48S4(3,4)S1 TP9C120D20MP12C 24.5 FC49D 1375 46.0 33.8 15.10 12.50
TCHE48S4(3,4)S1 TP9C120D20MP13C 24.5 FC49D 1200 45.5 32.0 15.10 12.50
TCHE48S4(3,4)S1 TPLC080C16MP12C 21.0 FC49D 1425 46.0 34.4 14.25 12.00
TCHE48S4(3,4)S1 TPLC080C16MP13C 21.0 FC49D 1200 45.5 32.2 14.75 12.25
TCHE48S4(3,4)S1 TPLC100C16MP12C 21.0 FC49D 1425 46.0 34.4 14.25 12.00
TCHE48S4(3,4)S1 TPLC100C16MP13C 21.0 FC49D 1200 45.5 32.2 14.75 12.25
TCHE48S4(3,4)S1 TPLC100C20MP12C 21.0 FC49D 1425 46.0 34.2 15.00 12.50
TCHE48S4(3,4)S1 TPLC100C20MP13C 21.0 FC49D 1225 45.5 32.4 15.00 12.50
TCHE48S4(3,4)S1 TPLC120C20MP12C 21.0 FC49D 1425 46.0 34.2 15.00 12.50
TCHE48S4(3,4)S1 TPLC120C20MP13C 21.0 FC49D 1225 45.5 32.4 15.00 12.50
TCHE48S4(3,4)S1 CP9C080C16MP13C 21.0 FC49D 1300 45.5 32.8 14.50 12.00
TCHE48S4(3,4)S1 CP9C100C16MP13C 21.0 FC49D 1175 45.5 32.0 15.00 12.50
TCHE48S4(3,4)S1 CP9C100C20MP12C 21.0 FC49D 1350 46.0 33.6 14.75 12.25
TCHE48S4(3,4)S1 CP9C100C20MP13C 21.0 FC49D 1225 45.5 32.4 14.75 12.25
TCHE48S4(3,4)S1 CP9C120D20MP12C 24.5 FC49D 1375 46.0 33.8 15.10 12.50
COOLING CAPACITY - With High Efficiency Motor Furnaces1(Continued)
UNIT
MODEL
FURNACE COIL
MODEL2
COOLING
MODEL WIDTH RATED
CFM NET MBH SEER EER
TOTAL SENS.

5371957-CTG-D-0120
8 Johnson Controls Ducted Systems
PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings.
APPLICATIONS AND ACCESSORIES
Refer to Price Manual for specific model numbers.
* For Low Ambient and/or Long Lineset Applications, please see the acces-
sories listed below.
Non-Standard Lineset Applications - For installations with
reduced diameter or long linesets, refer to the current version of
the Piping Application Guide P/N 247077, available in the Appli-
cation Bulletins section on www.simplygettingthejobdone.com.
OD Unit Anti Short Cycle Kit (10 Pack) S1-2TD08700124BK:
A time delay that prevents rapid compressor restarting as a
result of power interruption, limit switch operation, or thermostat
resetting. Not required for HP models, or for AC models with
factory electronic controls.
Standard Low Ambient Control Kit S1-2LA06700424: Allows
the use of air conditioning at low outdoor ambient temperatures
down to +20°F (-7°C). For use with all R-410A single stage AC
& HP models.
Advanced Low Ambient Control Kit S1-2LA04701024: Con-
tains the necessary components and controls to allow cooling
operation down to -20ºF (-29ºC). For use with some R-410A
single stage AC & HP models. This accessory can only be
applied to models that contain a PSC outdoor fan motor.
Low Pressure Switch Kit S1-2PS06700524: Provides field
installed low pressure (loss of charge) protection. Not required
for HP models, or for AC models with factory electronic con-
trols.
High Ambient Outdoor Fan Motor S1-FHM****HT: Class F
70°C motor to allow cooling operation up to 160ºF air entering
the outdoor coil. For use with all R-410A single stage AC & HP
models containing R-410A refrigerant only.
Outdoor Communicating Board Kit (S1-33102952310): Elec-
tronic control upgrade for standard AC units to provide compati-
bility with the Residential Touch Screen Communicating
Control.
Compressor Crankcase Heater Kit (S1-025-*****-***): A
wrap-around electrical resistance heater that warms the com-
pressor sump, reducing the chance of liquid slugging on
startup. Required on all long lineset and low ambient applica-
tions. See Price Pages or Source1 SmartSearch for the correct
part for each application.
Indoor TXV Kit S1-1TVM***: Thermal expansion valves pre-
cisely meter refrigerant for optimum performance over a wide
range of conditions. See System Charge Table, Price Pages, or
Source1 Smart Search for TXV part number for each AC & HP
model.
Cold Weather Charging Tent S1-CHGTENT01: Provides
warm environment to accurately service AC & HP systems in
ambient conditions 55ºF (13ºC) or colder.
Touch-up Paint S1-5130153****: Color matched aerosol paint
for touching up unit chassis and panels. See Price Pages or
Source1 SmartSearch for the correct color for each application.
Compressor Sound Blanket S1-0100764*000: A field
installed dense foam cover that provides 2dBA sound level
reduction. See Price Pages or Source1 SmartSearch for the
correct blanket for each application.
Thermostat: Compatible thermostat controls are available
through accessory sourcing. For optimum performance, these
outdoor units are fully compatible with our Coleman Hx™
Touchscreen Thermostats available through Source1. For more
information, see the thermostat section of the Product Equip-
ment Catalog.
SOUND POWER RATINGS
Rated in accordance with ARI Standard 270.
TCHE48S4(3,4)S1 CP9C120D20MP13C 24.5 FC49D 1200 45.5 32.0 15.10 12.50
TCHE48S4(3,4)S1 CPLC080C16MP12C 21.0 FC49D 1425 46.0 34.4 14.25 12.00
TCHE48S4(3,4)S1 CPLC080C16MP13C 21.0 FC49D 1200 45.5 32.2 14.75 12.25
TCHE48S4(3,4)S1 CPLC100C16MP12C 21.0 FC49D 1425 46.0 34.4 14.25 12.00
TCHE48S4(3,4)S1 CPLC100C16MP13C 21.0 FC49D 1200 45.5 32.2 14.75 12.25
TCHE48S4(3,4)S1 CPLC100C20MP12C 21.0 FC49D 1425 46.0 34.2 15.00 12.50
TCHE48S4(3,4)S1 CPLC100C20MP13C 21.0 FC49D 1225 45.5 32.4 15.00 12.50
TCHE48S4(3,4)S1 CPLC120C20MP12C 21.0 FC49D 1425 46.0 34.2 15.00 12.50
TCHE48S4(3,4)S1 CPLC120C20MP13C 21.0 FC49D 1225 45.5 32.4 15.00 12.50
For rated condition information, see the footnotes below the System Capacity - Single Piece and Modular Air Handlers table.
1. High Efficiency Motor Furnaces have B.O.D (Blower Off Delay) standard.
2. CM coils available with a factory installed horizontal drain pan. See price pages for specific model number.
COOLING CAPACITY - With High Efficiency Motor Furnaces1(Continued)
UNIT
MODEL
FURNACE COIL
MODEL2
COOLING
MODEL WIDTH RATED
CFM NET MBH SEER EER
TOTAL SENS.
Standard Application Limits*
Maximum Lineset Equivalent Length 200 Ft
Outdoor Ambient Temperature Limits
Cooling Operation Maximum DB 120°F
Minimum DB 50°F
Cooling Octave Band Sound Power Level (db re. 1-pW)
Model Number 63 125 250 500 1000 2000 4000 8000 dBA
TCHE36S4(3,4)S11 74 77 68 67 66 61 58 58 71
TCHE48S4(3,4)S11 75 81 70 68 66 61 58 58 72

5371957-CTG-D-0120
Johnson Controls Ducted Systems 9
MECHANICAL SPECIFICATIONS
MANUFACTURE AND CERTIFICATIONS
• Units shall be manufactured in an ISO 9001 certified facility.
• Units shall be certified by CSA to UL 1995 / CSA 22.2 and
performance certified to ANSI/AHRI Standard 210/240.
• Units shall be sound tested according to ANSI/AHRI Stan-
dard 270.
• Certified matched system ratings will be available for down-
load from the AHRI online directory at www.ahridirectory.org
• Unit packaging shall be marked, “Assembled in the USA”
UNIT APPLICATION
• Units shall be approved for cooling operation between 50ºF
and 120ºF without modification.
• Units shall be approved for linesets up to 200 feet equivalent
length without modification.
• Units shall be approved for installation within 6 inches of a
flat vertical wall without modification, according to the
instructions in the technical literature.
• Units shall be certified for seismic applications in accordance
with CBC 2007 and IBC 2006.
• Units shall be designed to 72dBA or less to minimize sound
pollution.
UNIT ACCESS
• Units shall have a fan guard that can be removed inde-
pendently of the cabinet for access to the condenser coil.
• Units shall have blow-through airflow for the condensing coil.
• Units shall have a separate compartment for electrical con-
trols that can be accessed without disturbing the unit airflow.
UNIT CONSTRUCTION
• Units shall be shipped completely wired, piped and assem-
bled. Wiring pigtails shall be provided for field control wiring
connections. Service valves shall be provided for field refrig-
erant line connections.
• Units shall be factory leak checked, run tested, and shipped
with a holding charge of R-410A refrigerant.
• Unit cabinet components shall be G90 equivalent steel fin-
ished with powder-coat paint rated at a minimum of 1,000
hours under ASTM B117 testing.
• Unit base pan shall be stamped G90 equivalent steel fin-
ished with powder-coat paint rated at a minimum of 1,000
hours under ASTM B117 testing.
• Units shall have a factory installed filter drier for faster instal-
lation and improved system reliability.
• Units shall be constructed with a high pressure switch and a
low pressure switch for system protection.
UNIT COMPONENTS
• Compressor shall be hermetic with internal electrical over-
load protection and internal overpressure protection.
• Compressor shall be mounted on rubber vibration isolators
that do not require the removal of transportation clips or
brackets.
• Units shall be constructed with scroll compressors.
• Outdoor fan shall be direct drive with horizontal air dis-
charge.
• Outdoor fan shall be direct drive with swept-wing blades for
low sound levels.
• Outdoor coil shall be air cooled and constructed of zinc-
coated aluminum microchannel construction for small size
and low weight.
UNIT WARRANTIES
• Unit manufacturer shall provide a 10-Year compressor war-
ranty without a requirement for unit registration.
• Unit manufacturer shall provide a 5-Year parts warranty with-
out a requirement for unit registration.

5371957-CTG-D-0120
10 Johnson Controls Ducted Systems
TYPICAL INSTALLATION
MOUNTING HOLE GRAPHIC
TYPICAL FIELD WIRING
THERMOSTAT
WEATHERPROOF
DISCONNECT
SWITCH
6” CLEARANCE
AROUND PERIMETER
MINIMUM 18” CLEARANCE
FOR CONTROL ACCESS PANELS SEAL OPENING(S) WITH
PERMAGUM OR EQUIVANT
TO INDOOR UNIT
NEC CLASS 2 WIRING
TO FURNACE OR
AIR HANDLER
TERMINAL BLOCK
NEC CLASS 1 WIRING
NOTES:
ALL OUTDOOR WIRING MUST BE WEATHERPROOF.
CAN BE STACKED TWO-HIGH WITH APPROVED STACKING KIT.
AIRFLOW
DIRECTION
28.06 7.50
18.73
LARGE CABINET
ALL FIELD WIRING TO BE IN ACCORDANCE WITH ELECTRIC CODE (NEC) AND/OR LOCAL CODES
POWER WIRING
CONTACTOR
TERMINALS
COIL
GND.
LUG
CYRGW
YRGW
POWER WIRING
CONTROL WIRING
FACTORY WIRING
24 VOLT CONTROL WIRING
MINIMUM 18 GA. WIRE
(NEC CLASS 2) FURNACE OR AIR HANDLER TERMINAL BLOCK
ROOM THERMOSTAT
CONDENSING UNIT
ALL OUTDOOR WIRING MUST BE WEATHERPROOF. USE COPPER CONDUCTORS ONLY.
TERMINAL W IS ONLY
REQUIRED ON SYSTEMS
WITH HEAT.
*
*

5371957-CTG-D-0120
Johnson Controls Ducted Systems 11
PERFORMANCE DATA - 3 TON
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 °F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
CONDENSER-ONLY DATA (OUTDOOR UNIT)
MODEL SATURATED SUCTION
@ COMPRESSOR Outdoor Ambient Temperature
55 °F 65 °F 75 °F 85 °F 95 °F 105 °F 115 °F 120 °F
T (°F) P (PSIG) MBH KW MBH KW MBH KW MBH KW MBH KW MBH KW MBH KW MBH KW
TCHE36S4(3,4)S1
35 107 33.3 3.24 31.8 3.24 30.2 3.24 28.6 3.24 26.9 3.24 25.0 3.24 23.0 3.24 21.9 3.24
40 118 36.6 3.22 35.0 3.22 33.3 3.22 31.6 3.22 29.7 3.22 27.7 3.22 25.5 3.22 24.4 3.22
45 130 40.1 3.20 38.4 3.20 36.7 3.20 34.8 3.20 32.8 3.20 30.6 3.20 28.3 3.20 27.0 3.20
50 142 43.9 3.18 42.1 3.18 40.2 3.18 38.2 3.18 36.0 3.18 33.7 3.18 31.2 3.18 29.8 3.18
55 156 47.8 3.09 45.9 3.16 43.9 3.16 41.8 3.16 39.4 3.16 36.9 3.16 34.3 3.16 32.9 3.16
Notes:
1. For Outdoor Unit (Condenser) performance only. Data does not include the effects of air handler power or heat.
2. Performance based on 15°F subcooling and 15°F superheat at the Outdoor Unit base valves.
a. Increase capacity by 1% for each 2°F increase in subcooling.
b. Decrease capacity by 1% for each 2°F decrease in subcooling.
3. Maximum recommended condensing temperature is 140°F.
COOLING PERFORMANCE DATA
AIR CONDITIONER MODEL NO. TCHE36S4(3,4)S1
INDOOR COIL MODEL NO. FC38C
AIR TEMP.
ENTERING
OUTDOOR UNIT (°F)
IDCFM 800 1000 1200
ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80
ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72
55 / 45 T.C. 34.1 37.0 36.9 39.8 42.1 35.6 38.0 37.9 40.9 42.9 37.1 39.0 38.9 41.9 43.6 S.C. 32.9 31.6 27.0 26.5 21.1 34.3 34.3 29.0 28.3 22.0 35.7 37.0 31.1 30.1 22.8
K.W. 1.89 1.91 1.88 1.90 1.92 1.96 1.98 1.96 1.98 2.00 2.04 2.06 2.05 2.06 2.09
65 / 55 T.C. 33.2 35.7 35.7 38.7 41.4 34.7 36.8 36.7 39.7 42.2 36.2 37.9 37.7 40.7 43.0 S.C. 32.0 30.9 26.6 26.3 21.0 33.4 33.6 28.8 28.3 22.1 34.9 36.2 31.0 30.4 23.2
K.W. 2.07 2.09 2.07 2.08 2.08 2.15 2.16 2.14 2.15 2.16 2.22 2.23 2.22 2.23 2.25
75 / 63 T.C. 32.3 34.5 34.6 37.6 40.7 33.8 35.6 35.6 38.6 41.6 35.3 36.8 36.5 39.6 42.4 S.C. 31.1 30.3 26.2 26.1 21.0 32.5 32.9 28.5 28.4 22.3 34.0 35.4 30.9 30.6 23.5
K.W. 2.25 2.28 2.26 2.26 2.24 2.33 2.35 2.32 2.33 2.32 2.40 2.41 2.39 2.40 2.40
85 / 69 T.C. 31.4 33.4 33.2 36.3 39.3 32.8 34.5 34.1 37.2 40.1 34.3 35.7 35.0 38.1 40.9 S.C. 30.2 29.9 25.5 25.5 20.5 31.6 32.1 27.9 27.9 21.9 33.0 34.4 30.3 30.2 23.3
K.W. 2.49 2.54 2.52 2.51 2.49 2.56 2.60 2.58 2.58 2.57 2.63 2.67 2.64 2.65 2.64
95 / 75 T.C. 30.5 32.4 31.8 35.0 38.0 31.9 33.5 32.6 35.8 38.7 33.3 34.5 33.4 36.6 39.5
S.C. 29.4 29.6 24.9 25.0 20.0 30.7 31.4 27.3 27.4 21.5 32.0 33.3 29.7 29.8 23.0
K.W. 2.73 2.79 2.77 2.76 2.74 2.80 2.85 2.84 2.83 2.81 2.87 2.92 2.90 2.90 2.88
105 / 83 T.C. 29.2 30.8 30.1 33.2 36.2 30.6 32.0 30.9 34.0 36.9 31.9 33.2 31.7 34.8 37.6 S.C. 28.2 28.6 24.2 24.3 19.4 29.4 30.3 26.5 26.7 20.9 30.7 32.0 28.9 29.1 22.4
K.W. 3.16 3.20 3.20 3.14 3.08 3.19 3.23 3.25 3.19 3.15 3.22 3.26 3.29 3.24 3.22
115 / 89 T.C. 28.0 29.3 28.5 31.5 34.5 29.3 30.6 29.2 32.3 35.1 30.6 31.9 30.0 33.0 35.8 S.C. 26.9 27.7 23.4 23.7 18.7 28.2 29.2 25.7 26.0 20.3 29.5 30.7 28.1 28.4 21.8
K.W. 3.58 3.59 3.62 3.50 3.41 3.57 3.59 3.65 3.54 3.48 3.56 3.59 3.67 3.58 3.55
120 / 95 T.C. 26.7 27.9 26.9 29.8 32.7 28.0 29.2 27.6 30.5 33.3 29.3 30.6 28.3 31.2 34.0 S.C. 25.7 26.8 22.7 23.0 18.1 27.0 28.1 25.0 25.4 19.7 28.2 29.4 27.2 27.7 21.2
K.W. 3.99 3.99 4.04 3.86 3.75 3.94 3.96 4.04 3.89 3.81 3.90 3.92 4.05 3.92 3.87
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
Green shaded cells are ACCA (TVA) conditions.
Blue shaded cells are AHRI conditions.

5371957-CTG-D-0120
12 Johnson Controls Ducted Systems
COIL MULTIPLIERS - 3 TON
Air Handler Coil T.C. S.C. KW
– FC38C 1.00 1.00 1.00
ME16CN21 FC38C 1.01 0.99 0.95
ME12CN41 FC38C 1.00 1.04 0.98
ME16CN41 FC38C 1.00 0.98 0.98
MVC16CN21 FC38C 1.01 0.99 0.96
FURNACE MULTIPLIERS - 3 TON
Furnaces Coil T.C. S.C. KW
TM9E080C16MP11 FC38C 0.99 0.91 0.96
TM9E080C16MP12 FC38C 1.00 0.96 0.97
TM9E080C20MP12 FC38C 1.01 1.01 0.98
TM9E100C16MP11 FC38C 0.99 0.99 0.99
TM9E100C16MP12 FC38C 1.01 0.96 0.98
TM9E100C20MP11 FC38C 0.99 0.99 0.99
TM9E100C20MP12 FC38C 1.01 1.00 0.98
TM9V080C16MP11C FC38C 1.00 0.99 0.99
TM9V100C16MP11C FC38C 1.00 0.99 0.99
TM9V100C20MP11C FC38C 0.99 0.99 0.99
TM9Y060B12MP11 FC38C 0.98 0.91 0.95
TM9Y080C16MP11 FC38C 0.99 0.91 0.96
TM9Y100C16MP11 FC38C 0.99 0.99 0.99
TM9Y100C20MP11 FC38C 0.99 0.99 0.99
TMLE080B12MP11 FC38C 1.00 0.95 0.99
TMLE080C16MP11 FC38C 1.01 0.97 0.98
TMLE080C20MP11 FC38C 1.01 1.01 0.98
TMLE100B12MP11 FC38C 1.01 0.97 1.00
TMLE100C16MP11 FC38C 1.01 0.97 0.98
TMLE100C20MP11 FC38C 1.01 1.01 0.98
TMLE120C16MP11 FC38C 1.01 0.97 0.98
TMLE120C20MP11 FC38C 1.01 1.02 0.98
TMLV080C16MP11C FC38C 0.99 0.99 1.01
TMLV100C16MP11C FC38C 0.99 0.99 1.01
TMLV100C20MP11C FC38C 1.00 0.98 0.97
TMLV120C20MP11C FC38C 1.00 0.98 0.97
TMLX080B12MP11 FC38C 0.99 0.91 0.96
TMLX080C16MP11 FC38C 1.00 0.99 0.99
TMLX100C16MP11 FC38C 1.00 0.99 0.99
TMLX100C20MP11 FC38C 0.99 0.99 0.99
TMLX120C20MP11 FC38C 0.99 0.99 0.99
TP9C080C16MP12C FC38C 1.00 0.99 0.99
TP9C100C16MP12C FC38C 1.00 0.99 0.99
TP9C100C20MP12C FC38C 0.99 0.99 0.99
TPLC080C16MP12C FC38C 0.99 0.99 1.01
TPLC100C16MP12C FC38C 0.99 0.99 1.01
TPLC100C20MP12C FC38C 1.00 0.98 0.97
TPLC120C20MP12C FC38C 1.00 0.98 0.97
CP9C080C16MP12C FC38C 1.00 0.99 0.99
CP9C100C16MP12C FC38C 1.00 0.99 0.99
CP9C100C20MP12C FC38C 0.99 0.99 0.99
CPLC080C16MP12C FC38C 0.99 0.99 1.01
CPLC100C16MP12C FC38C 0.99 0.99 1.01
CPLC100C20MP12C FC38C 1.00 0.98 0.97
CPLC120C20MP12C FC38C 1.00 0.98 0.97
FURNACE MULTIPLIERS - 3 TON (Continued)
Furnaces Coil T.C. S.C. KW

5371957-CTG-D-0120
Johnson Controls Ducted Systems 13
PERFORMANCE DATA - 4 TON
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 °F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
CONDENSER-ONLY DATA (OUTDOOR UNIT)
MODEL SATURATED SUCTION
@ COMPRESSOR Outdoor Ambient Temperature
55 °F 65 °F 75 °F 85 °F 95 °F 105 °F 115 °F 120 °F
T (°F) P (PSIG) MBH KW MBH KW MBH KW MBH KW MBH KW MBH KW MBH KW MBH KW
TCHE48S4(3,4)S1
35 107 45.1 4.13 42.9 4.22 40.7 4.22 38.5 4.22 36.2 4.22 33.7 4.22 31.1 4.22 29.8 4.22
40 118 49.5 4.20 47.0 4.20 44.7 4.20 42.3 4.20 39.9 4.20 37.2 4.20 34.4 4.20 33.0 4.20
45 130 54.0 4.17 51.5 3.99 48.9 4.17 46.4 4.17 43.8 4.17 40.9 4.17 37.9 4.17 36.4 4.17
50 142 58.8 4.14 56.1 4.05 53.4 4.14 50.6 4.14 47.8 4.14 44.9 4.14 41.7 4.14 39.9 4.14
55 156 64.1 4.10 61.1 4.01 58.2 4.10 55.1 4.10 52.1 4.10 49.0 4.10 28.8 4.10 43.8 4.10
Notes:
1. For Outdoor Unit (Condenser) performance only. Data does not include the effects of air handler power or heat.
2. Performance based on 15°F subcooling and 15°F superheat at the Outdoor Unit base valves.
a. Increase capacity by 1% for each 2°F increase in subcooling.
b. Decrease capacity by 1% for each 2°F decrease in subcooling.
3. Maximum recommended condensing temperature is 140°F.
COOLING PERFORMANCE DATA
AIR CONDITIONER MODEL NO. TCHE48S4(3,4)S11
INDOOR COIL MODEL NO. FC49D
AIR TEMP.
ENTERING
OUTDOOR UNIT (°F)
IDCFM 1225 1425 1625
ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80
ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72
55 / 45 T.C. 44.7 47.2 46.9 48.4 50.4 46.0 48.1 47.7 49.1 51.3 47.2 49.1 48.6 49.8 52.2 S.C. 43.4 38.7 33.4 30.8 25.5 44.6 40.6 34.8 31.9 26.3 45.8 42.4 36.1 32.9 27.0
K.W. 2.46 2.48 2.48 2.50 2.55 2.54 2.56 2.56 2.58 2.64 2.62 2.64 2.64 2.67 2.73
65 / 55 T.C. 43.7 46.1 46.3 48.5 51.2 45.1 47.1 47.3 49.4 52.0 46.6 48.2 48.3 50.2 52.9 S.C. 42.3 39.0 33.5 31.7 26.1 43.8 41.5 35.4 33.1 27.0 45.2 44.0 37.2 34.5 28.0
K.W. 2.71 2.73 2.74 2.75 2.79 2.79 2.81 2.81 2.83 2.88 2.87 2.89 2.89 2.92 2.97
75 / 63 T.C. 42.6 45.0 45.7 48.7 51.9 44.3 46.2 46.9 49.6 52.8 46.0 47.3 48.1 50.6 53.6 S.C. 41.3 39.2 33.5 32.6 26.6 42.9 42.4 35.9 34.4 27.8 44.6 45.5 38.3 36.1 29.0
K.W. 2.97 2.99 3.00 3.01 3.03 3.05 3.06 3.07 3.09 3.12 3.12 3.14 3.13 3.17 3.20
85 / 69 T.C. 41.3 43.1 43.9 46.9 50.6 43.0 44.3 45.0 47.8 51.4 44.7 45.4 46.1 48.7 52.2 S.C. 40.0 38.6 32.9 32.0 26.2 41.7 41.2 35.3 34.1 27.4 43.3 43.8 37.8 36.1 28.7
K.W. 3.33 3.35 3.36 3.36 3.37 3.40 3.42 3.44 3.44 3.46 3.47 3.49 3.51 3.52 3.54
95 / 75 T.C. 40.0 41.3 42.0 45.1 49.2 41.6 42.3 43.1 46.0 50.0 43.3 43.4 44.2 46.9 50.9
S.C. 38.8 37.9 32.2 31.5 25.7 40.4 40.0 34.7 33.8 27.1 42.0 42.1 37.3 36.1 28.5
K.W. 3.68 3.71 3.73 3.71 3.72 3.75 3.78 3.81 3.79 3.80 3.82 3.85 3.89 3.86 3.89
105 / 83 T.C. 38.1 39.3 39.9 43.1 47.1 39.8 40.6 41.0 44.0 47.9 41.6 41.9 42.2 44.9 48.7 S.C. 37.0 36.7 31.2 30.8 24.9 38.6 38.7 33.8 33.2 26.4 40.3 40.7 36.4 35.5 27.8
K.W. 4.24 4.30 4.33 4.23 4.20 4.28 4.32 4.39 4.29 4.28 4.32 4.34 4.44 4.35 4.35
115 / 89 T.C. 36.4 37.3 37.9 41.2 45.1 38.1 38.9 39.0 42.0 45.9 39.9 40.5 40.1 42.9 46.7 S.C. 35.2 35.5 30.3 30.1 24.2 36.9 37.4 32.9 32.5 25.7 38.6 39.3 35.6 35.0 27.2
K.W. 4.78 4.86 4.91 4.73 4.67 4.79 4.83 4.94 4.78 4.74 4.80 4.81 4.97 4.83 4.81
120 / 95 T.C. 34.6 35.4 35.8 39.2 43.0 36.4 37.2 37.0 40.1 43.8 38.2 39.1 38.1 41.0 44.6 S.C. 33.5 34.3 29.4 29.4 23.5 35.3 36.1 32.0 31.9 25.0 37.0 37.9 34.7 34.4 26.5
K.W. 5.31 5.42 5.49 5.23 5.14 5.30 5.35 5.50 5.26 5.20 5.28 5.28 5.50 5.30 5.26
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
Green shaded cells are ACCA (TVA) conditions.
Blue shaded cells are AHRI conditions.

Subject to change without notice. Published in U.S.A. 5371957-CTG-D-0120
Copyright © 2020 by Johnson Controls. All rights reserved. Supersedes: 5371957-CTG-C-0919
York International Corp.
5005 York Drive
Norman, OK 73069
COIL MULTIPLIERS - 4 TON
Air Handler Coil T.C. S.C. KW
– FC49D 1.00 1.00 1.00
ME14DN21 FC49D 1.01 1.02 0.98
ME20DN21 FC49D 1.01 1.02 0.98
ME20DN41 FC49D 1.01 1.03 0.98
MVC14DN21 FC49D 0.99 0.94 0.94
MVC20DN21 FC49D 1.01 1.01 0.96
FURNACE MULTIPLIERS - 4 TON
Furnaces Coil T.C. S.C. KW
TL8E080C16UH11 FC49D 0.99 0.96 0.98
TL8E100C20UH11 FC49D 0.99 0.96 0.96
TL9E080C16UH11 FC49D 0.99 0.96 0.98
TL9E100C20UH11 FC49D 1.01 1.02 1.00
TM8E080C16MP11 FC49D 0.99 0.96 0.98
TM8E080C20MP11 FC49D 0.99 0.96 0.96
TM8E100C16MP11 FC49D 1.00 0.98 0.99
TM8E100C20MP11 FC49D 0.99 0.96 0.96
TM8E120C16MP11 FC49D 1.00 0.98 0.99
TM8E120C20MP11 FC49D 0.99 0.96 0.96
TM8E130D20MP11 FC49D 0.99 0.96 0.96
TM8V080C16MP11C FC49D 1.00 1.02 1.01
TM8V080C16MP12C FC49D 0.99 0.95 0.98
TM8V100C16MP11C FC49D 1.00 1.02 1.01
TM8V100C16MP12C FC49D 0.99 0.95 0.98
TM8V100C20MP11C FC49D 1.00 1.01 0.97
TM8V100C20MP12C FC49D 0.99 0.96 0.96
TM8V120C20MP11C FC49D 1.00 1.01 0.97
TM8V120C20MP12C FC49D 0.99 0.96 0.96
TM8X080C16MP11 FC49D 1.00 1.01 0.99
TM8X100C16MP11 FC49D 1.00 1.01 0.99
TM8X100C20MP11 FC49D 1.01 1.02 0.98
TM8X120C20MP11 FC49D 1.01 1.02 0.98
TM8Y080C16MP11 FC49D 1.00 1.01 0.99
TM8Y100C16MP11 FC49D 1.00 1.01 0.99
TM8Y100C20MP11 FC49D 1.01 1.02 0.98
TM8Y120C20MP11 FC49D 1.01 1.02 0.98
TM9E080C16MP12 FC49D 0.99 0.96 0.98
TM9E080C20MP12 FC49D 0.99 0.95 0.96
TM9E100C16MP11 FC49D 1.00 1.02 1.03
TM9E100C16MP12 FC49D 0.99 0.96 0.98
TM9E100C20MP11 FC49D 1.00 1.01 0.97
TM9E100C20MP12 FC49D 1.01 1.02 0.98
TM9E120D20MP11 FC49D 1.01 1.02 0.98
TM9E120D20MP12 FC49D 0.99 0.95 0.96
TM9V080C16MP12C FC49D 0.99 0.97 1.00
TM9V100C16MP12C FC49D 0.99 0.95 0.96
TM9V100C20MP11C FC49D 1.00 0.99 0.99
TM9V100C20MP12C FC49D 0.99 0.96 0.98
TM9V120D20MP11C FC49D 1.00 1.00 0.97
TM9V120D20MP12C FC49D 0.99 0.95 0.96
TM9Y100C16MP11 FC49D 1.00 1.02 1.03
TM9Y100C20MP11 FC49D 1.00 1.01 0.97
TM9Y120D20MP11 FC49D 1.01 1.02 0.98
TMLE080C16MP11 FC49D 0.99 0.96 0.98
TMLE080C20MP11 FC49D 0.99 0.96 0.96
TMLE100C16MP11 FC49D 1.00 0.98 0.99
TMLE100C20MP11 FC49D 0.99 0.96 0.96
TMLE120C16MP11 FC49D 1.00 0.98 0.99
TMLE120C20MP11 FC49D 0.99 0.96 0.96
TMLE130D20MP11 FC49D 0.99 0.96 0.96
TMLV080C16MP11C FC49D 1.00 1.02 1.01
TMLV080C16MP12C FC49D 0.99 0.95 0.98
TMLV100C16MP11C FC49D 1.00 1.02 1.01
TMLV100C16MP12C FC49D 0.99 0.95 0.98
TMLV100C20MP11C FC49D 1.00 1.01 0.97
TMLV100C20MP12C FC49D 0.99 0.96 0.96
TMLV120C20MP11C FC49D 1.00 1.01 0.97
TMLV120C20MP12C FC49D 0.99 0.96 0.96
TMLX080C16MP11 FC49D 1.00 1.01 0.99
TMLX100C16MP11 FC49D 1.00 1.01 0.99
TMLX100C20MP11 FC49D 1.01 1.02 0.98
TMLX120C20MP11 FC49D 1.01 1.02 0.98
TP9C080C16MP13C FC49D 0.99 0.97 1.00
TP9C100C16MP13C FC49D 0.99 0.95 0.96
TP9C100C20MP12C FC49D 1.00 0.99 0.99
TP9C100C20MP13C FC49D 0.99 0.96 0.98
TP9C120D20MP12C FC49D 1.00 1.00 0.97
TP9C120D20MP13C FC49D 0.99 0.95 0.96
TPLC080C16MP12C FC49D 1.00 1.02 1.01
TPLC080C16MP13C FC49D 0.99 0.95 0.98
TPLC100C16MP12C FC49D 1.00 1.02 1.01
TPLC100C16MP13C FC49D 0.99 0.95 0.98
TPLC100C20MP12C FC49D 1.00 1.01 0.97
TPLC100C20MP13C FC49D 0.99 0.96 0.96
TPLC120C20MP12C FC49D 1.00 1.01 0.97
TPLC120C20MP13C FC49D 0.99 0.96 0.96
CP9C080C16MP13C FC49D 0.99 0.97 1.00
CP9C100C16MP13C FC49D 0.99 0.95 0.96
CP9C100C20MP12C FC49D 1.00 0.99 0.99
CP9C100C20MP13C FC49D 0.99 0.96 0.98
CP9C120D20MP12C FC49D 1.00 1.00 0.97
CP9C120D20MP13C FC49D 0.99 0.95 0.96
CPLC080C16MP12C FC49D 1.00 1.02 1.01
CPLC080C16MP13C FC49D 0.99 0.95 0.98
CPLC100C16MP12C FC49D 1.00 1.02 1.01
CPLC100C16MP13C FC49D 0.99 0.95 0.98
CPLC100C20MP12C FC49D 1.00 1.01 0.97
CPLC100C20MP13C FC49D 0.99 0.96 0.96
CPLC120C20MP12C FC49D 1.00 1.01 0.97
CPLC120C20MP13C FC49D 0.99 0.96 0.96
FURNACE MULTIPLIERS - 4 TON (Continued)
Furnaces Coil T.C. S.C. KW