Color imagination SI-056 User manual

180
180
180
180 W
W
W
W Moving
Moving
Moving
Moving Head
Head
Head
Head Beam
Beam
Beam
Beam
SI-05
SI-05
SI-05
SI-05 6
6
6
6
User
User
User
User Manual
Manual
Manual
Manual
KEEP
KEEP
KEEP
KEEP THIS
THIS
THIS
THIS MANUAL
MANUAL
MANUAL
MANUAL FOR
FOR
FOR
FOR FUTURE
FUTURE
FUTURE
FUTURE NEEDS
NEEDS
NEEDS
NEEDS

1.
1.
1.
1. Un
Un
Un
Un packing
packing
packing
packing
Thank you for Color Imagination ’ s 18 0W Moving Head Beam . For your own safety, please read
this manual before installing the device. This manual covers the important information on
installation and applications. Please install and operate the fixture with following instructions.
Meanwhile, please keep this manual well for future needs.
Color Imagination ’ s 18 0W Moving Head Beam is made of a new type of high temperature
strength of engineering plastics and cast aluminum casing with nice outlook. The fixture is designed
and manufactured strictly following CE standards, complying with international standard DMX512
protocol. It ’ s available independently controlled and linkable with each other for operation. And it is
applicable for large-scale live performances, theater, studio, nightclubs and discos.
SI-05 6 adopts powerful Osram SIRIUS HRI 180W lamp with revolutionary technology which
features high brightness and stability. Please carefully un pack it when you receive the fixture and
check whether it is damaged during the transportation. And please check whether the following
items are included inside the box:
Moving Head---- -----one Signal Cable----one
Omega Clamp------ -Two User Manual----one
Safety Chain---------One
1
1
1
1 3
3
3
3 .
.
.
. Maintenance
Maintenance
Maintenance
Maintenance and
and
and
and Cleaning
Cleaning
Cleaning
Cleaning
The following points have to be considered during the inspection:
1) All screws for installing the devices or parts of the device have to be tightly connected and must not
be corroded.
2) There must not be any deformations on the housing, color lenses, fixations and installation spots
(ceiling, suspension, trussing).
3）Mechanically moved parts must not show any traces of wearing and must not rotate with
unbalances.
4）The electric power supply cables must not show any damage, material fatigue or sediments.
Further instructions depending on the installation spot and usage have to be adhered by a skilled
installer and any safety problems have to be removed.
In order to make the lights in good condition and extend the life time, we suggest a regular cleaning to
the lights.
1) Clean the inside and outside lens each week to avoid the weakneness of the lights due to
accumulation of dust.
2) Clean the fan each week.
3) A detailed electric check by approved electrical engineer each three month, make sure that the
circuit contacts are in good condition, prevent the poor contact of circuit from overheating.
We recommend a frequent cleaning of the device. Please use a moist, lint- free cloth. Never use
alcohol or solvents.
There are no serviceable parts inside the device. Please refer to the instructions under “ Installation
instructions ” .
Should you need any spare parts, please order genuine parts from your local dealer.

11.
11.
11.
11. Product
Product
Product
Product Dimensions
Dimensions
Dimensions
Dimensions
12.
12.
12.
12. Product
Product
Product
Product Overviews
Overviews
Overviews
Overviews
2.
2.
2.
2. S
S
S
S afety
afety
afety
afety I
I
I
I nstructions
nstructions
nstructions
nstructions
This device has left the factory in perfect condition. In order to maintain this condition and to ensure a
safe operation, it is absolutely necessary for the user to follow the safety instructions and warning
notes written in this user manual.
If the device has been exposed to temperature changes due to environmental changes, do not switch
it on immediately. The arising condensation could damage the device. Leave the device switched off
until it has reached room temperature.
This device falls under protection-class I. Therefore it is essential that the device be earthed.
The electric connection must carry out by qualified person.
The device shall only be used with rate voltage and frequency.
Make sure that the available voltage is not higher than stated at the end of this manual.
Make sure the power cord is never crimped or damaged by sharp edges. If this would be the case,
replacement of the cable must be done by an authorized dealer.
Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle the
power cord by the plug. Never pull out the plug by tugging the power cord.
During initial start-up some smoke or smell may arise. This is a normal process and does not
necessarily mean that the device is defective, it should decrease gradually.
Please don't project the beam onto combustible substances.
Fixtures cannot be installed on combustible substances, keep more than 50cm distance with wall for
smooth air flow, so there should be no shelter for fans and ventilation for heat radiation.
If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the
manufacturer or his service agent or a similar qualified person in order to avoid a hazard.

3.
3.
3.
3. Operation
Operation
Operation
Operation Instructions
Instructions
Instructions
Instructions
-The moving head is for beam effect for onsite decoration purpose .
-Don ’ t turn on the fixture if it ’ s been through severe temperature difference like after
transportation because it might damage the light due to the environment changes. So make sure
to operate the fixture until it is in normal temperature .
- This light should be keep away from strong shaking during any transportation or movement.
-Don ’ t pull up the light by only the hea d, or it might cause damages to the mechanical parts.
- Don ’ t expose the fixture in overhea t, moisture or environment with too much dust when installing
it. And don ’ t lay any power cables on the floor. Or it might cause electronic shock to the people.
- Make sure the installation place is in good safety condition before installing the fixture.
-Make sure to put the safety chain and check whether the screws are screwed properly when
installing the fixture.
- Make sure the lens are in good condition. It ’ s recommended to replace the units if there are any
damages or severe scratch.
- Make sure the fixture is operated by qualified personnel who knows the fixture before using.
- Keep the original packages if any second shipment is needed.
- Don ’ t try to change the fixtures without any instruction by the manufacturer or the appointed
repairing agencies.
-It is not in warranty range if there are any malfunctions from not following the user manual to
operate or any illegal operation, like shock short circuit, electronic shock, lamp broke, etc.
4.
4.
4.
4. Mounting
Mounting
Mounting
Mounting and
and
and
and Installation
Installation
Installation
Installation
Cautions:
Cautions:
Cautions:
Cautions: For added protection mount the fixtures in areas outside walking paths, seating areas,
or in areas were the fixture might be reached by unauthorized person nel .
Before mounting the fixture to any surface, make sure that the installation area can hold a
minimum point load of 10 times the device ’ s weight.
Fixture installation must always be secured with a secondary safety attachment, such as an
appropriate safety cable.
Never stand directly below the device when mounting, removing, or servicing the fixture.
Other DMX modes available
Customizable DMX channel assignment
DMX, stand-alone, master/slave, sound activated mode
DMX recorder and edit function integrated
Software update
3-pin or 5-Pin XLR serial input/output
Fan cooling system
Constant temperature readout / management function
DB rating @ 1M = 54,18db
2 x 1/4 turn fastening Omega Clamps
Electronic ballast and power supply
10.
10.
10.
10. Technical
Technical
Technical
Technical Specifications
Specifications
Specifications
Specifications
Input Voltage: AC 100V ~ 240V 50/60Hz
Light Source : 1* Osram SIRIUS HRI 180W lamp
Control Signal: DMX512, master-slave and sound activated or auto operation
Control Channel: 1 4 DMX Channels
Power Consumption: 342 W
Dimensions: 315 x 359 x 514 mm
Packing Dimensions: 620*430*415mm
Net Weight: 15kg
Gross Weight: 18kg

9.
9.
9.
9. Key
Key
Key
Key Features
Features
Features
Features
2000 hour rated lamp source
Osram SIRIUS HRI 180W lamp ( 8400lumen, 7500 °K, 2000h) included
5 9320 Lux @ 2,5m
2,5 °beam angle
No need for adjustment of reflector or lamp
Anti-reflection lenses
1 color wheel with total 13 colors plus open
Variable direction rainbow effect with speed adjustable
1 rotatable gobo wheels with 12 rotatable, indexable and interchangeable gobos plus open
Variable speed gobo scrolling in both directions
12.0mm outside, 8mm image diameter (Gobo Size )
1 rotatable and indexable 8-facet prism with speed adjustable and variable direction
Macro-function for rotat able gobo/prism combinations
Variable Frost Filter (Hybrid effect for Wash)
Dual flag mechanical dimming system
Variable speed strobe effect
Preset variable/random strobe and dimming pulse effects
Motor driven focus from near to far
540 °/630 °PAN and 2 65 °TILT movement
Automatic Pan / Tilt position correction
16 bit smooth and precise resolution for PAN/TILT movement
Motors for fast and accurate Pan / Tilt positioning
Vector Mode with blackout MIB function
Blue LCD Display
1 4 DMX channels USITT DMX-512 (16-bit resolution)
from a ceiling, or set on a flat level surface (see illustration below). Be sure this fixture is kept at
least 0.5m (1.5 ft) away from any flammable materials (decoration etc.).
Always use and install the supplied safety cable as a safety measure to prevent accidental damage
and/or injury in the event the clamp fails.
Mounting
Mounting
Mounting
Mounting points
points
points
points :
:
:
:Overhead mounting requires extensive experience, including amongst others
calculating working load limits, a fine knowledge of the installation material being used, and
periodic safety inspection of all installation material and the fixture. If you lack these qualifications,
do not attempt the installation yourself. Improper installation can result in bodily injury.
Be sure to complete all rigging and installation procedures before connecting the main power
cord to the appropriate wall outlet.
Clamp
Clamp
Clamp
Clamp Mounting
Mounting
Mounting
Mounting :
:
:
:The Beam provides two unique mounting bracket assembly s that integrates
the bottom of the base, the included “ Omega Bracket, ” and the safety cable rigging point in one
unit (see the illustration below). When mounting this fixture to truss be sure to secure an
appropriately rated clamp to the included omega bracket using a M10 screw fitted through the
center hole of the “ omega bracket ” . As an added safety measure be sure to attached at least one
properly rated safety cable to the fixture using on of the safety cable rigging point integrated in
the base assembly .

Regardless of the rigging option you choose for your BEAM , always be sure to secure your fixture with a
safety cable. The fixture provides a built-in rigging point for a safety cable on the hanging bracket as
illustrated above. Be sure to only use the designated rigging point for the safety cable and never secure a
safety cable to a carrying handle.
5.
5.
5.
5. DMX-512
DMX-512
DMX-512
DMX-512 control
control
control
control connections
connections
connections
connections
Connect the provided XLR cable to the female 3-pin XLR output of your controller and the other side to the
male 3-pin XLR input of the moving head. You can chain multiple m oving head together through serial
linking. The cable needed should be two core, screened cable with XLR input and output connectors.
Please refer to the diagram below.
DMX-512 connection with DMX terminator
For installations where the DMX cable has to run a long distance or is in an electrically noisy environment,
such as in a discotheque, it is recommended to use a DMX terminator. This helps in preventing corruption
of the digital control signal by electrical noise. The DMX terminator is simply an XLR plug with a 120 Ω
resistor connected between pins 2 and 3,which is then plugged into the output XLR socket of the last
fixture in the chain. Please see illustrations below.
1
1
1
1
2
2
2
2
3
3
3
3
PIN 3
PIN 3
PIN 3
PIN 3
PIN 2
PIN 2
PIN 2
PIN 2
120
120
120
120 Ω
224-255 Shutter open
9 7 2 Dimmer 0-255 0-100% Linear dimmer
10 8 6 Focus 0-255 In(near) to out(far)
11 9 7
Rrotating
prism,
Prism ,
Gobo
macros
0-005 OFF
006-127 ON
128-189 Forwards rotation from fast to slow
190-193 Prism rotation stop
194-255 Backwards rotation from slow to fast
12 10 8 Frost
0-099 Frost off
100-255 Frost on
13 11 11
Speed
P an/ Ti l t
0-225 M ax to min speed
226-235 B lackout by movement
236-245 B lackout by all wheel changing
246-255 N o function
14 12 12 Special
0-019 No function
020-029 No function
030-039 No function
040-059 Lamp on
060-079 Lamp switch off
080-099 Motor reset
100-119 Internal program 1
120-139 Internal program 2
140-159 Internal program 3
160-179 Internal program 4
180-199 Internal program 5
200-219 Internal program 6
220-239 Internal program 7
240-255 Internal program 8

6 4 4 Gobo 1
048-055 Gobo 6
056-063 Gobo 7
064-071 Gobo 8
072-079 Gobo 9
080-087 Gobo 10
088-095 Gobo 11
096-103 Gobo 12
104-111 Gobo 1 shake from slow to fast
112-119 Gobo 2 shake from slow to fast
120-127 Gobo 3 shake from slow to fast
128-135 Gobo 4 shake from slow to fast
136-143 Gobo 5 shake from slow to fast
144-151 Gobo 6 shake from slow to fast
152-159 Gobo 7 shake from slow to fast
160-167 Gobo 8 shake from slow to fast
168-175 Gobo 9 shake from slow to fast
176-183 Gobo 10 shake from slow to fast
184-191 Gobo 1 1 shake from slow to fast
192-199 Gobo 1 2 shake from slow to fast
200-255 Rot. gobo wheel cont. rotation from slow to fast
7 5 5
Gobo 1
rotation
0-003 Gobo rotation stop
004-127 Forwards gobo rotation from fast to slow
128-131 Gobo rotation stop
132-255 Backwards gobo rotation from slow to fast
8 6 1
Shutter ,
Strobe
0-031 Shutter closed
032-063 S hutter open
064-095 Strobe effect slow to fast
096-127 S hutter open
128-159 Pulse strobe effect in sequences from slow to fast
160-191 S hutter open
192-223 Random strobe effect from slow to fast
6.
6.
6.
6. Menu
Menu
Menu
Menu Operations
Operations
Operations
Operations
Function Mode DMX Address A001~AXXX
Set to slave
Auto Run Internal Program1~8 Master/Alone
Music Control Internal Program1~8 Master/Alone
Reset On/Off
Reverse Pan On/Off
Reverse Tilt On/Off
Mic sensitivity 0~99% Sensitivity of mic
Special Reset Default On/Off
Calibration Code （Password ：088 ）
PAN, TILT, Color Wheel, Gobo Wheel
1, Gobo Wheel 2, Focus
Temperature XXX ℃/℉
Manual Control Lamp On/Off
Channel
PAN=XXX ……
Signal Set Wire DMX
Wireless DMX
Act WDMX & Out
Edit Program Program1
…
Program8
Steps(1..48)
Scenes 01
…
Scenes XX
Pan=XXX …
…
Time=xx.xS
Mode of channel Mode Set 16Bit Mode
8Bit Mode
Design Mode
Design
Mode Set
Max Channel = XX
PAN = 001
…

Information Lamp Hours XXXX(Hours)
Clear Lamp
Time
On/Off
Software
Version
V1.0~V9.9
7.
7.
7.
7. Photometric
Photometric
Photometric
Photometric Data
Data
Data
Data
8.DMX
8.DMX
8.DMX
8.DMX Channels
Channels
Channels
Channels
Mode/Channel
Mode/Channel
Mode/Channel
Mode/Channel Function
Function
Function
Function Values
Values
Values
Values Description
Description
Description
Description
16B 8B DE
1 1 9 Pan 0-255 PAN Movement
2 Pan Fine 0-255 Fine control of Pan movement
3 2 10 Tilt 0-255 Tilt Movement
4 Tilt Fine 0-255 Fine control of Tilt movement
5 3 3 Color
0-008 Open/White
009-017 Color 1
018-026 Color 2
027-035 Color 3
036-044 Color 4
045-052 Color 5
053-061 Color 6
062-070 Color 7
071-079 Color 8
080-088 Color 9
089-096 Color 10
097-105 Color 11
106-114 Color 12
115-127 Color 13
128-189 Forwards rainbow effect from fast to slow
190-193 Color rotation stop
194-255 Backwards rainbow effect from slow to fast
0-007 Open
008-015 Gobo 1
016-023 Gobo 2
024-031 Gobo 3
032-039 Gobo 4
040-047 Gobo 5