Colorlight X20m User manual

LE D Vid e o C ont roller
Quick Start Guide V1.2
X20m/X26m/X40m

Contents
Cautions .............................................................................................................................................................1
1 Hardware ........................................................................................................................................................ 2
1.1 Front panel .................................................................................................................................................. 2
1.2 Rear panel ................................................................................................................................................... 3
2 Hardware connection ................................................................................................................................... 6
3 Software operation ....................................................................................................................................... 7
3.1 Screen settings ........................................................................................................................................... 7
3.2 Device d etection ......................................................................................................................................... 7
3.3 Input interface ............................................................................................................................................ 7
3.4 Output settings ........................................................................................................................................... 8
3.5 Input settings .............................................................................................................................................. 8
3.6 General settings .......................................................................................................................................... 9
3.7 Preset and Tour .......................................................................................................................................... 9
3.8 Device settings ............................................................................................................................................ 9
3.8.1 Basic settings ........................................................................................................................................... 9
3.8.2 Version ...................................................................................................................................................... 9
3.8.3 Encr yption / Decry ption ......................................................................................................................... 9
4 Troublesho oting .......................................................................................................................................... 10

1
Cautions
To prevent personal injury and equipment damage, read and follow the safety p recautions below.
Power s afety
Please do not squeeze the power cord and e quipment with heavy objects.
The dev ice must use a grounded powe r supply.
There are live parts in the device, non-professionals are not allowed to disassem ble the device without
permission to avoid e lectric shock .
Please do not disassemble the dev ice when it is pow ered on or running to avoid the risk o f electric shock.
Please turn off th e main power of t h e device w h e n it is not in use for a long time in a humi d environment.
When t h e device is not in use , please disconnect the power supply from the device and unplug the power
plug from the pow er outlet.
Op e rational s a fety
Please do not place the de vice on an unstable surface to avoid the de vice falling and causing dama ge,
which may cause serious personal injury or death.
Please do not operate with w et hands to prevent electric shock .
Please do not use the product in an environmen t containing flammable substances, explosive gases or
heat sources.
Please do not spill any corrosive chemicals or liquids on or near the e quipment .
Please chec k a n d test before using it if the eq uipment is stored for a long time.
Please powe r off the device and u se a dr y rag to clean the device before cleaning the device.
Please do not block the heat dissipation holes, an d keep the working e nvironment well ventilated, so that
the heat generated by the equipme nt during operation can be discharged in time, so as to avoid
equipment damage caused by poor heat dissipation.
Please use appropriate packaging or original packaging during transportation in order to prevent the
equipment from being damaged by strong vibration during transportation.
Please be careful not to drop the equ ipm ent to avoid pe rsonal injur y or equipment damage when carryi ng
the equipm ent.
FCC statemen t
This device complies with part 1 5 of the FCC Rules. Operation is subj ect to the following two conditions: (1)
this dev ice may not cause h armfu l interference, and (2) this device must accept any interference received,
including interference that may cause undes ired operation.
En vironmental protection
Please do not dispose of this device and its accessories as ordinar y household waste. Discarded
equipment should be t reated as industrial waste, and incineration is strictly prohibited.

2
1 Hardware
1.1 Front panel
No
Item
Function
1
LCD
Display the operation menu and syst em information.
2
Knob
Select an item or adjust the parameter, press t he knob t o confirm your selection or
adjustment.
3
Function key
OK: Confirm button.
Bright: Tune brightness.
ESC: Exit the current operation or back to previous menu.
Black: Black screen.
Lock: Lock all the keys of the front panel.
Freeze: Freeze screen.
HDMI 2. 0 / DP / HD MI 1 / HDMI 2 / D V I 1 / DVI 2 :
Switching to a signal source by c l icking corresponding button.
- Click the button can switch directly the corresponding signal.
- In U-disk playback mode, these buttons serve respectively as play / pause , stop ,
previous and next .
Signal: Input s ource information.
Media: Media playback function butt ons.
Mode: Select a preset.
4
Power button
Switch On / Off.
* This picture takes X20m LED video controller as an example, and
the equipment shown in the picture is for reference only.

3
1.2 Rear panel
Co ntrol
1
LAN
RJ45 port, connect to a switch for accessing local area network.
2
RS232
RJ11 port(6p6c), connect to t hird-party device.
3
USB IN
USB2.0 Type B port, connect to a PC f or debugging or cascading input.
USB OUT
USB2.0 Type A port, as cascading output.
Audi o
4
AUDIO IN
Interface type: 3.5mm.
Receive audio signals from computers and other equipment.
AUDIO OUT
Interface type: 3.5mm.
Support HDMI, DP audio decod ing and output audio signals to devices such a s active
speakers.
3D
5
3D*
output 3D sync signal (optional, for use with active 3D glasses).
In put
6
HDMI 2.0
1× HDMI2.0 input, support HDMI1.4/HDMI1.3.
Maximum 4096×2160@60Hz, Minimum 800×600@60Hz, Maximum pixel clock 600MHz.
-Maximum 8192 (8192×1080@60Hz) in width.
-Maximum 8192 (1080×8192@60Hz) in height.
Support independent EDI D settings, using EDID V1.3 standard.
Support audio input.
HDR is not supported.
De-interlaced signal input not supported.

4
7
DP 1.2
1× DP1.2 port.
Maximum 4096×2160@60Hz, Minimum 800×600@60Hz, Maximum pixel clock 600MHz.
-Maximum 8192 (8192×1080@60Hz) in width.
-Maximum 8192 (1080×8192@60Hz) in height.
Support independent EDI D settings, using EDID V1.3 standard.
Support audio input.
HDR is not supported.
De-interlaced signal input not supported.
8
HDMI 1, HDMI 2
2× HDMI1.4 input.
Maximum 1920×1200@60Hz, Minimum 800×600@60Hz
-Maximum 4096 (4096×512@60Hz) in width.
-Maximum 4096 (512×4096@60Hz) in height.
Support independent EDI D settings, using EDID V1.3 standard.
HDCP1.4 compliant, back wards compatible.
Support audio input.
De-interlaced signal input not supported.
9
DVI 1, DV I 2
2× DVI input.
Maximum 1920×1200@60Hz, Minimum 800×600@60Hz
-Maximum 4096 (4096×512@60Hz) in width.
-Maximum 4096 (512×4096@60Hz) in height.
Support independent EDI D settings, using EDID V1.3 standard.
HDCP1.4 compliant, back wards compatible.
De-interlaced signal input not supported.
10
U-DISK
U-disk interface, hot-swappable, support play video / photo playback from U- disk.
USB flash drive format: NTFS, FAT32, exFAT.
Image format: JPEG, BMP, PNG, WEBP, GIF.
-Maximum image 4096 ×2160@60Hz.
Video file: 3GP, AVI, FLV, M4V, MKV , MP4, TP, TS, VOB, WMV, MPEG.
-Video encoding: MPEG-1 / 2, MPEG-4, H.264 / AVC, H.265 / HEVC, GOOGLE VP8, MOTION
JPEG.
-Audio encoding: MPEG Audio, Windows Media Audio, AAC Audio, AMR Audio.
-Maximum 4096×2160@60Hz.

5
Ou tput
11
MASTER (FIBER 1,
FIBER 2)
BACK-UP (FIBER
1, FIBER 2)
X20m: 4× 10G Optical interfaces (2 main and 2 backup).
-MASTER FIBER 1 corresponds to PORT 1-10 Gigabit Ethernet ports output.
-MASTER FIBER 2 corresponds to PORT 11-20 Gigabit Ethernet ports output.
-BACK-UP FIBER 1 is the backup for MASTER FI BER 1.
-BACK-UP FIBER 2 is the backup for MASTER FI BER 2.
X26m: 3× 10G Optical interfaces.
-FIBER 1 corresponds to PORT 1-10 Gigabit Ethernet ports output.
-FIBER 2 corresponds to PORT 11-20 Gigabit Ethernet ports output.
-FIBER 3 corresponds to PORT 21-26 Gigabit Ethernet ports output.
X40m: 4× 10G Optical interfaces.
-FIBER 1 corresponds to PORT 1-10 Gigabit Ethernet ports output.
-FIBER 2 corresponds to PORT 11-20 Gigabit Ethernet ports output.
-FIBER 3 corresponds to PORT 21-30 Gigabit Ethernet ports output.
-FIBER 4 corresponds to PORT 31-40 Gigabit Ethernet ports output.
It needs t o be used with 10G single-mode optical module (Purchase separately), supports
dual LC f iber interface, wavelengt h 1310nm, transmission distance 2 km.
12
PORT 1-20
PORT 1-26
PORT 1-40
X20m/X26m/X40m load capacity per port: 655,360 pixels.
X20m/X26m/X40m load capacity per port:
-Output 8bit@60Hz: 0.65 megapixels.
-Output 8bit@120Hz: 0.32 megapixels.
-Output 8bit@240Hz: 0.16 megapixels.
X20m: 20 Gigabit Ethernet ports.
-Total load capacity: 13.10 million pixels, with maximum 16,384 pixels in width and
maximum 8,192 pixels in height.
X26m: 26 Gigabit Ethernet ports.
-Total load capacity: 17.03 million pixels, with maximum 16,384 pixels in width and
maximum 8,192 pixels in height.
X40m: 40 Gigabit Ethernet ports.
-Total load capacity: 26.21 million pixels, with maximum 16,384 pixels in width and
maximum 8,192 pixels in height.
The recommended maximum cable (CAT5e) run length is 100 meters.
Support redundant backup.
Power
13
MAINS INPUT
AC100-240V, 50 / 60Hz, connect to AC power supply, built-in fuse.
* This picture takes X20m LED video controller as an example, and
the equipment shown in the picture is for reference only.

6
2 Hardware connection
Before using the equipm ent, please connect the i nput , ou tput an d control inter faces according to t he hardware
interface, and finally connect the p o wer supp ly.
Networ k p o rt ou tput: When se le cting the ne twork port output , you can connect to t h e LED dis play through
the network cable.
Optical po r t ou t put: When selecting the optical port output, the optical port is first connected to the optical
fiber transceiver ( purchase separately), the n connected to t he LED display screen through th e Network.
cable.
* This picture takes X20m LED video controller as an example, and the e quipment shown in the picture is for reference only.

7
3 Software operation
Please use Colorlight's LEDVISION software to configure the screen an d set up
the device.
-Please make sure t he LED screens were set up with correct receiver cards parameters.
-Before setting the parameters, ensure that the hardware is connected correct ly, which means
the sender and all receiver cards can be detected via software.
-Please visit www.colorlightinside.com to download LEDVISION.
3.1 Screen settings
Run C olorlight's LE DVISION softw are, choose C ont rol＞Led Scree n Settings
(enter the authorized password 1 68 or 77 7.)
-On the Sendin g De vice tab page, select S e n der as sending device and click Detect S e nder s.
-On the Detect Receivers page, click A ll.
-Enter the Receiv er M a ppi ng ( L ook Fr om Fr on t), add corresponding number and size of receiver cards
for each port probed.
-Click a port index, and add connectivity relationship of receiver cards, according to its actual panel
connections.
-Send the connectivity relationship t o the screen, and check its display. Save if the display is correct.
* If the screen doesn't display properly, double check, send and save the connectivity relationship.
3.2 Device detection
Open the browser an d enter the IP address: 192.16 8.1.10 to enter the
VideoStation Web Login interface and set up the display for the de vice.
-Enter the account number and password ( initial account number is 123456 and initial password is
123456) and click L ogin to enter the VideoStation Web operation interface, and t he device name will
be identified automatically.
* If the device is not detected, please check whether the network cable is connected properly and the
relevant driver is installed correctly.
When connecting via PC network cable, it may be necessary to configure the corresponding IP address on
the PC.
3.3 Input interface
Check current vid eo source information in the Inp u t Interface list on the left side
of the can vas v ie w interface.

8
-In put I n terface displays current input ports, when an interface has signal input, it will display (green
light).
Drag and drop a signal source from the i nput i nterface into the canvas on the
right, it will display corresponding source w indow.
-Right-click a source window and in the pop-up menu, switch the source of the window, set t he layer
position and window size as required.
3.4 Output settings
In the Out put Settings U I, you can modify the Ca nvas Si ze and edit the de vice
Out pu t M o de.
3.5 Input settings
In the Dev ice Vi ew, select an input source from the de vice rear panel image, and
set its Inp u t Form at, E DI D Se ttings, Cr op ping, etc.

9
3.6 General settings
In the Dev ice Vie w, select the equipme nt (click on the picture other than input /
output area), you can set up Sy nc Sig nal Settings, Test Mo de, Prec ise C olor
Man agement, 3 D Settings(optional), A udio S ettings and Ot h er S ettings.
3.7 Preset and Tour
Enter the C an vas Vie w to set the inp u t source and click Sa ve P reset.
-Click Edit, choose the preset you want to add to t he tour and click Add To Tour.
-Click Tour, set the T our Interval and click Start.
3.8 Device settings
3.8.1 Basic settings
In the B asic s ettings, you can set the dev ice name and devi ce IP,im port a nd ex por t de v i ce parameters,
restore factory se ttings.
3.8.2 Version
In the V ersio n UI, you can check out the firmware version, upg rade devi ce, update fon t and upgrade
LOGO.
3.8.3 Encryption / Decryption
On t he top panel, click , select Au tho ri zation and enter 168.
-Select De vi ce S e ttings＞Encry ption / D ecryption to e ncrypt and decrypt the device, you can also
Synchr onize Netwo rk T ime as required by encryption.

10
Official Website: www.colorlightinside.com
Head Office Address: Room 37F-39F, Building 8, Zone A,
Shenzhen International Innovation Valley, Vanke Cloud City, Dashi Yilu,
Nanshan District, Shenzhen, China
4008 7 70 7 75
Colorlight Cloud Tech Ltd
Service Phone
4 Troubleshooting
Problem
Possible Cause
Remedy
No image display on the LED
screen.
Poor power contact.
Check the power connector and ma ke sure
the good contact .
Device pow er off.
Make sure the POWER button on.
Poor image quality such as
"double image."
Unqualified HDMI cable.
Replace wit h high quality cable.
HDMI cable too long .
Lower the signal reso lution o r short e n the
cable.
No image output after signal
switching.
No signal source input for the
channel afte r switchin g.
Check the proper signal inp ut.
Poor cable contact .
Check the input an d output cable and
ensure a good contact.
Unable to use.
Internal dam ag e of the device .
Contact Te chnical Support.
Statement
Copyright ©202 3 Co lorlight Cloud Tech Ltd. All righ ts reser ved.
No part of this document may be copied, reproduced, transcribed, or translated without the prior written
permission of Colorli g ht Cloud Tech Ltd, nor be used for any commercial or profit-making purposes in an y
form or by any means.
This guide is for reference only and does not constitute any form of commitment. Please refer to the
actual p roducts ( incl udi n g but n ot limited to color, size, screen display, etc.).