Comelit HFX-700W User manual

FREE DOWNLOAD
MYCOMELIT, L'APP PER IL PROFESSIONISTA
MYCOMELIT: THE APP FOR PROFESSIONALS
Amazon, Alexa and all related logos
are trademarks of Amazon.com,
Inc. or its aliates.
EN
QUICK
REFERENCE
GUIDE
EN FR ES
Single-User Kit HFX-700W
also available in
French and Spanish

2
door entry monitor backplate
×1 ×1 ×4 ×4
screws
dry wall
anchors
EX-7000HW - Door entry monitor
EX-7000HW 1209/4EX-B
HFX-700W Kit
Nameplate
for 1 user screwsexternal unit
×2 ×2
dry wall
anchors
×1
YOUR NAME
EX-B External unit
screwspower supply
×1 ×2
1209/4 - BUS Power supply Technical manual
The components of the kit are already configured for operation in the
basic version.
Further information can be found in the complete
manual, which is available to download from the
website pro.comelitgroup.com or by decoding the
following QR code.
By installing and configuring the COMELIT App on smartphone /
tablet it is possible to answer video door entry calls from a local and
remote network (or mobile network); in addition it is possible to make
a Self activation on cameras/entrance panels and send commands to
actuator modules.
The Smart Registration manual will help during the first installation
of Comelit App on smartphone/tablet. Smart Registration manual and
Comelit App manual are available to download from the website
pro.comelitgroup.com
door entry monitor
power supply
backplate
dry wall
anchors screws
screws
external unit
Nameplate
for 1 user
dry wall
anchors screws
1. Contents of the package

3
2. Parts identification
2.1 EX-B EXTERNAL UNIT
1. Hole for wall mounting
2. Terminal block
L L bus line connection
RTE programmable RTE (local lock-release input) or
DO input (door open indication)
GND / SE- RTE and door lock input reference negative
SE+ electric door lock connection
NO relay normally open contact
Crelay common contact
3. Microphone
4. Wide-angle colour camera
5. Camera lighting LED
6. Nameplate
7. Call button
8. Adjustment trimmer (See page 13)
9. Addressing and programming DIP-switches
10. CNF Programming confirmation button
11. S2 Special programming selector
12. S1 Button programming selector
13. Loudspeaker
14. Fixing screw
3.15 in
5.90 in
1.06
1.14
1.18 in
9.
11.
12.
13.
10.
14.
8.
1. 3.
4.
5.
6.
7.
2.
1.

4
4.52 in 0.83 in
6.29 in
2.2 EX-7000HW DOOR ENTRY MONITOR
3.
5.
4.
1.
2.
6.
7.
8.
9.
10.
12.
11.
13.
1. Brightness control
2. Loudspeaker volume control
3. Call volume adjustment (high - medium - low)
4. 4.3” LCD colour screen
5. Speaker and audio activation key / Paging call key
6. Capacitive-touch keys
7. S1 Micro-switches for user code setting
8. S2 Micro-switches for programming keys and functions
DIP 1-2-3-4 Keys function programming
DIP 5-6 Access to programming
DIP 7 Power supply voltage management (Default ON - Do not
change!)
DIP 8 (not used)
9.10. Factory setting - Do not change!
11. CV 5 Jumper for video closure
12. Pin for securing terminal block
13. S3 Microswitches:
DIP 1 operating mode (Default ON - Do not change!)
DIP 2 (not used)
Terminal block for system connection:
LL BUS line connection terminals
CFP1 CFP2 Outside door call input
______________________________________________________________
Capacitive-touch key description:
Answer call / Paging call / Hands-Free mode activation
Lock-release
Actuator [programmable]
Self activation [programmable]
(No function) [programmable]
Automatic lock-relase (Doctor mode) [programmable]
Navigating menu: up, down, right and left
Confirm a selection, select / deselect an option
Quick access to the video messages section
Menu / ON-OFF display / Return
Silent mode (Privacy)
______________________________________________________________
Indicator LED description:
FLASHING LED: incoming call
STEADY LED (WITH CALL): In communication
STEADY LED (IDLE): Hands-Free mode enabled
FLASHING LED: Incoming call
FLASHING LED (SLOWLY): door open
1 FLASH AFTER PRESSING: door opening confirmation
1 FLASH AFTER PROG.: Confirm “Key programming executed”
STEADY LED: Silent mode active (Ringtone)
STEADY AND FLASHING LED (3 every 5 s.): Doctor mode and Silent
mode active
OFF AND FLASHING LED (3 every 5 s.): automatic lock-relase (Doctor
mode) active
4 FLASHES: The called device is busy
FLASHING LED: User notification present
notification
open gate
generic actuator
When used in conjunction with the Comelit app (available to download
free of charge from Google Play or App Store) and/or the voice
assistants Alexa/Eco Show/Google Assistant, it can be used to answer
calls directly from your smartphone/tablet/assistants, both locally and
remotely.
Can be used to enable the “Face recognition” function *
• to send the lock-release (enabled by default) and/or actuator
command automatically on recognition of a subject
• to receive notification when a known person makes a call
* Face recognition on the Mini Hands-Free Wi-Fi door entry monitor is based on a 2D geometric measurement
which maps the face, identifying the position of the features (eyes, nose, mouth...) and measuring the distance
between them. This technology can be used to open doors and gates in busy areas, however it does not
guarantee the highest security level.
For further information please refer to the “General conditions of use and license” and the “Privacy Policy”:
https://www.comelitgroup.com/en/systems/video-entry-technology/away-from-home-app/

5
50-60Hz
OUTPUT/SORTIE 34V 0.5A 2A 1'on/5'o
ta=40°C
110V-240V 1.4A
LNL4
L4
L3
L3
INPUT/D'ENTREE
Dopo un cortocircuito,per ripristinare l'apparecchio,
interrompere l'alimentazione per circa 1 minuto.
To reset the operation after a short circuit,cut o mains
voltage for about 1 minute.
Apres un court circuit, pour remettre en fonction l'appareil,
interrompre l'alimentation pendant environs une minute.
L2L2L1L1
LP
LP
C US
R
Art.1209/4
1.
2.
3.
4.
1. 2.
3.55 in
1.42 in 2.28 in
4.17 in 3.52 in
2.44 in
2.3 1209/4 BUS POWER SUPPLY
2.4 PARTS IDENTIFICATION FOR EXPANSION
ADDITIONAL INTERNAL UNIT
EX-7000H EX-7000H
The art. EX-7000H is the additional internal unit for Single-User Kits
(For further information see the respective manual).
ADDITIONAL EXTERNAL UNIT
EX-BSB
+
1405EX-B
The art. EX-BSB is the additional external unit for Single-User Kits
and contains the external unit art. EX-B (see page 3for further
information) and the Video door expander art. 1405 (see point "2.4.1
1405 Video splitter" on page 5 for further information)
1. LM LM Art. 1209/4 connection
2. LS | LS additional external unit connection
LP | LP main external unit connection
1. LP LP external unit connection
2. L1 | L1 door entry monitor connection 1
L2 | L2 door entrymonitor connection 2
L3 | L3 door entrymonitor connection 3
L4 | L4 door entrymonitor connection 4
3. Video closing jumpers
(REMOVE WHEN LINE IS USED)
4. L N mains power input 110-240 V~
2.4.1 Video door expander art. 1405

6
3.1.1 Single-User Kit HFX-700W
A
B
C
1209/4
EX-B
HFX-700W
EX-7000HW
3. System installation
A
B
C
1209/4
EX-7000H
expansion
door entry monitor
EX-7000H
expansion
door entry monitor
EX-7000H
expansion
door entry monitor
EX-B
HFX-700W
EX-7000HW
3.1.2 Maximum Expansion Monitors in Daisy Chain connection
expansion
door entry monitor
expansion
door entry monitor
expansion
door entry monitor
Maximum 2 monitors
per output
Wire Assignment Wire Assignment Wire Type Amax. B max. Cmax.
SINGLE PAIR CABLE CAT5
24AWG
1,115 feet
(340 m)
557 feet
(170 m)
557 feet
(170 m)
DOUBLE PAIR
CABLE
CAT5
24AWG
1,312 feet
(400 m)
656 feet
(200 m)
656 feet
(200 m)
MULTI PAIR CABLE
FOLLOW THE COLORS
SHOWN IN THE DIAGRAM!
GREEN
ORANGE
BLU
GREEN / WHITE
ORANGE / WHITE
BLU / WHITE
BROWN / WHITE
BROWN
CAT5
24AWG
1,312 feet
(400 m)
656 feet
(200 m)
656 feet
(200 m)
non-braided cable AWG22 1,115 feet
(340 m)
557 feet
(170 m)
557 feet
(170 m)
non-braided cable AWG18 1,181 feet
(360 m)
590 feet
(180 m)
590 feet
(180 m)
3.1 OPERATING DISTANCES AND SYSTEM LAYOUT

7
1209/4
1405 14051405
EX-B EX-B EX-B EX-B
A
B
C
EX-7000H
expansion
door entry monitor
EX-7000H
expansion
door entry monitor
EX-7000H
expansion
door entry monitor
HFX-700W
EX-BSB
expansion external unit
EX-BSB
expansion external unit
EX-BSB
expansion external unit
EX-7000HW
3.1.3 Full System Expansion Diagram
EX-BSB
+
1405EX-B
expansion
door entry monitor
expansion external unit expansion external unit expansion external unit
expansion
door entry monitor
expansion
door entry monitor
NOTE: This system is capable to expanding up to 4 external units and 4 internal units. For alternative application please consult
our technical support engineer first.
At the first connection on the riser, the internal units automatically acquire theirs sub-addresses.
The LEDs and flash simultaneously for some seconds. After the procedure the LEDs will turn off.
The art. EX-BSB is the Additional External Unit for Single-User Kits and contains the external unit art. EX-B and the art. 1405
Video door expander.

8
routerComelit app
EX-7000HW
HFX-700W
C
F
P
LL
C
F
P
12
LL
E
T
R
NO
GND
SE-
SE
+
C
EX-B
S1 A
1209/4
L1 L1 L2 L2
LN
110-240V
LP LP L3 L3 L4 L4
ON
85 764321
LEAVE DEFAULT SETTING
ON
1 2 3 4 6 75 8
Local lock release button
LEAVE DEFAULT
SETTINGS
STANDARD INSTALLATION
Basic single-user kit

9
C
F
P
LL
C
F
P
12
1209/4
L1 L1 L2 L2
LN
110-240V
LP LP L3 L3 L4 L4
C
F
P
LL
C
F
P
12
C
F
P
LL
C
F
P
12
EX-7000H EX-7000H
EX-7000H
C
F
P
LL
C
F
P
12
REMOVE WHEN LINE IS USED
REMOVE CV5
HFX-700W
routerComelit app
EX-7000HW
S1 A
LEAVE DEFAULT SETTING
ON
1 2 3 4 6 75 8
S1 A
LEAVE DEFAULT SETTING
ON
1 2 3 4 6 75 8
S1 A
LEAVE DEFAULT SETTING
ON
1 2 3 4 6 75 8
S1 A
LEAVE DEFAULT SETTING
ON
1 2 3 4 6 75 8
REMOVE CV5
LL
E
T
R
NO
GND
SE-
SE
+
C
EX-B
Local lock release button
CV5
Video Closing Jumper
Video closing
jumper
LEAVE DEFAULT
SETTINGS
LEAVE DEFAULT
SETTINGS
LEAVE DEFAULT
SETTINGS
LEAVE DEFAULT
SETTINGS
REMOVE WHEN LINE IS USED
REMOVE CV5
REMOVE CV5
MAXIMUM EXPANSION IN DAISY CHAIN CONNECTION
Expanded single-user kit

10
0123
C
F
P
LL
C
F
P
12
HFX-700W
1209/4
L1 L1 L2 L2
LN
110-240V
LP LP L3 L3 L4 L4
C
F
P
LL
C
F
P
12
EX-7000H
C
F
P
LL
C
F
P
12
EX-7000H
C
F
P
LL
C
F
P
12
EX-7000H
1405
L
M
L
M
L
S
L
S
L
P
L
P
1405
L
M
L
M
L
S
L
S
L
P
L
P
1405
L
M
L
M
L
S
L
S
L
P
L
P
THESE DEVICES MUST BE STORED TOGETHER MAXIMUN CABLE LENGHT FOR 1405: 3 feet
REMOVE WHEN LINE IS USED
SET THE ADDRESS SET THE ADDRESS SET THE ADDRESS
LEAVE DEFAULT SETTING
EX-7000HW
S1 A
LEAVE DEFAULT SETTING
ON
1 2 3 4 6 75 8
S1 A
LEAVE DEFAULT SETTING
ON
1 2 3 4 6 75 8
S1 A
LEAVE DEFAULT SETTING
ON
1 2 3 4 6 75 8
S1 A
LEAVE DEFAULT SETTING
ON
1 2 3 4 6 75 8
ON
1 2 3 4 6 75 8
ON
1 2 3 4 6 75 8
ON
1 2 3 4 6 75 8
ON
1 2 3 4 6 75 8
LL
E
T
R
NO
GND SE-
SE
+
C
EX-B
LL
E
T
R
NO
GND SE-
SE
+
C
EX-B
LL
E
T
R
NO
GND SE-
SE
+
C
EX-B
LL
E
T
R
NO
GND SE-
SE
+
C
EX-B
LEAVE DEFAULT SETTINGSLEAVE DEFAULT SETTINGSLEAVE DEFAULT SETTINGS
LEAVE DEFAULT SETTINGS
LEAVE DEFAULT SETTINGS SET THE ADDRESS SET THE ADDRESS SET THE ADDRESS
REMOVE WHEN LINE IS USED
THESE DEVICES MUST BE STORED TOGHETHER MAXIMUM CABLE LENGHT FOR 1405: 3 feet
EX-BSB
+
1405EX-B
EXTERNAL UNIT ADDRESSING
CODE DIP 1 DIP 2 DIP 3
0
(default) OFF OFF OFF
ON
1 2 3 4 6 75 8
1ON OFF OFF
ON
1 2 3 4 6 75 8
2OFF ON OFF
ON
1 2 3 4 6 75 8
3OFF OFF ON
ON
1 2 3 4 6 75 8
The addresses must be consecutive! correct: 0,1,2,3 / incorrect: 0,1,3
Local lock release button
Expanded single-user kit
MAXIMUM EXPANSION

11
3
1
2
LLC
F
P
1C
F
P
2
1
2
3
4
32
1
2
3
5INSERTING THE TERMINALREMOVING THE TERMINAL
Before definitive installation of the monitors, make sure the device has good Wi-Fi signal reception; the distance
between the router and monitors, and the construction materials used in the walls are factors that can aect signal
quality.
The Wi-Fi signal is not strong enough to guarantee correct operation. A Wi-Fi repeater must be installed between
the router and monitor in order to boost the Wi-Fi signal received by the monitor.
1
1 2
2
63 in
51.18 in
optional
fixing
1
optional
fixing
3.2 ASSEMBLY MINI HANDSFREE WI-FI ART. EX-7000HW INTERNAL UNIT

12
The camera must not be installed in front of light sources, or in places where the filmed subject is against the light. In dim environments, we
recommend additional lighting is provided.
CLACK
2
1
5A
3 4
64.96 in
32.28 in
81.10 in
79°
19.68 in 19.68 in
19.68 in
32.28 in
67.32 in
51.18 in
79°
59.05 in
32.28 in
75.19 in
79°
43.70 in
96°
19.68 in
64.96 in
32.28 in
81.10 in
79°
19.68 in
19.68 in
19.68 in
32.28 in
67.32 in
51.18 in
79°
59.05 in
32.28 in
75.19 in
79°
43.70 in
96°
19.68 in
64.96 in
32.28 in
81.10 in
79°
19.68 in 19.68 in 19.68 in
32.28 in
67.32 in
51.18 in
79°
59.05 in
32.28 in
75.19 in
79°
43.70 in
96°
19.68 in 64.96 in
32.28 in
81.10 in
79°
19.68 in
19.68 in 19.68 in
32.28 in
67.32 in
51.18 in
79°
59.05 in
32.28 in
75.19 in
79°
43.70 in
96°
19.68 in
3.3 INSTALLATION OF EXTERNAL UNIT ART. EX-B

13
JOHN DOE
1.
2.
JOHN DOE
JOHN DOE
7 8
9
6
ADJUST IF NEEDED
DO NOT
CHANGE
Microphone
DO NOT
CHANGE
Loudspeaker
REMOVE TERMINAL IF NEEDED
1.
2.
3.
5B

14
FAM. SMITH
1.
2.
FAM. SMITH
5 6
CLACK
JOHN DOE
JOHN DOE
1 3 4
JOHN DOE
2
3.3.1 How to change the nameplate of the external unit art. EX-B
This Quick reference Guide contains all the basic informations to install the single-user kit.
Additional features in the full manual at the web site pro.comelitgroup.com:
• Configuration Capacitive-touch keys art. EX-7000HW
• Quick programming (generic actuator, internal intercom calls, internal paging calls, self activation main external unit, automatic lock-release (Doctor
mode)
• Special key programming (generic actuator, coded actuator, internal intercom calls, general intercom calls to another user code, internal paging calls,
general paging to another user code, self activation main external unit, automatic lock-release (Doctor mode)
• Reset programming art. EX-7000HW
• Range programming art. EX-7000HW
• Monitor ringtone selection art. EX-7000HW
• Navigation mode
• Device functions
• Configuration EX-B
• External unit addressing
• Function programming
• The lock-release relay and the second relay are controlled by 2 separate buttons (default: they are controlled by a single button)
• lock-release activation time and relay activation time: 8 sec (default: 2 sec)
• confirmation tones: disabled (default: enabled)
• camera lighting LED: disabled (default: enabled)
• reset wait time: 1 sec (default: 10 sec)
• Special function programming
• restore default
• Actuator relay module art. 1256
The art. 1256 is an Intelligent device for controlling a 10A relay for general uses:
• External unit lighting control,
• Activation function on Actuator pushbutton (gate control, lighting control, lift control...),
• Activation function on Actuator with code pushbutton (gate control, lighting control, lift control...).
• CCTV camera interface art. 1409
Art. 1409 allows to manage analog CCTV camera (up to 3). The module is capable of operating in different modes depending on the type of usage:
• Generic actuator mode
• Actuator with code mode
4. Additional features

15
2
1
5. System function
5.1 PERFORMING CALLS
5.1.1 How to call from the external unit
To send the call from an external unit, press the button.
» On the external unit the LED will flash and the confirmation
tone will sound. The video image from the external unit will
appear automatically on internal door entry monitor/s.
5.1.2 How to answer a call from an internal unit
» On receipt of a call from the external unit you will hear the
call ringtone
Press to enter into communication with the caller
Press again to terminate the call.
A call from the external unit always takes priority over an
intercom communication or a paging call
» the call in progress will be ended for the other devices.
5.2 PAGING CALL
5.2.1 How to initiate a paging call
Press to initiate the all-page chime
» After the chime sounds, a 30 seconds message can be
broadcast to all door entry monitors on the system (maxi-
mum 4).
5.2.2 How to answer a paging call
Press to answer the paging call
» a (300 seconds) point to point conversation between the
two door entry monitors is established.
» the paging call will be terminated for the other devices.
A call from the external unit always takes priority over an intercom communication or a paging call
» the call in progress will be terminated for the other devices.
12
5.3 LOCK-RELEASE FUNCTION
√During “call in progress” or during self activation.
Press to release the lock.
Press the desired key once to activate the function associated with it.
Wait for approximately 1 sec. before pressing the same key again. Pressing the same key several times in quick succession will
cancel the command.

16
5.5 ACTIVATION/DEACTIVATION AUTOMATIC LOCK-
RELEASE (DOCTOR MODE)
Can be used to enable automatic activation of the lock-release in
response to a call from the external unit.
Press the programmed button for 3 sec to disable/enable the
automatic lock-release.
» 3 flashes (every 5 sec.) of the LED indicate that the automatic
lock-release is active.
5.6 ACTIVATION/DEACTIVATION SILENT MODE
(PRIVACY)
Press to disable/enable the ringtone for calls from the external
unit and paging call.
» The red LED indicates that the silent mode is active.
In silent mode the paging call are still received!
5.4 SELF ACTIVATION FUNCTION
√Self activation is possible only when the system is in standby
Press the self activation button ( by default) to display on the
door entry monitor the video from the external unit.
Press again to cycle through several cameras
If a call is underway with an external unit it is NOT possible
to cycle between the external units
Press and hold the key to disable / enable the function.
Video memory
Video messages list
Wi-Fi setup
Setup
Wi-Fi reporting unconnected
App registration enable
Date and time settings
Language
Information
Reset
Reset WiFi configuration
Factory reset
Reset APP
By installing and configuring the COMELIT App on smartphone / tablet
it is possible to answer video door entry calls from a local and remote
network (or mobile network); it is possible to make a Self activation on
cameras/entrance panels and send commands to actuator modules.
The Smart Registration manual will help during the first installation of
Comelit App on smartphone/tablet. Smart Registration manual and
Comelit App manual are available to download from the website
pro.comelitgroup.com
6.1 WI-FI CONNECTION STATUS
Access point: If the system requires wireless connection of
the monitor, link the device with the local router
Signal strength:
Excellent Good Moderate Weak
Connection absent: Monitor Wi-Fi reception is enabled,
therefore you need to check the router conditions (on/
o, correct operation, distance from the monitor, correct
password).
Router connected, no internet: Check with your internet
provider.
6. Device functions
MAIN
EXTERNAL UNIT
MAIN
EXTERNAL UNIT
cycle
MAIN
UNIT
UNIT 1 UNIT 2 UNIT 3
MAIN
UNIT
UNIT
1
UNIT
2
UNIT
3
cycle

17
7.1 EX-7000HW MAIN DOOR ENTRY MONITOR
Display 4.3’’ Color LCD Screen
Resolution 480x272 pixel
Auto Timer (intercom) 300 sec
Operating Temperature Class B1 normal range indoor 41° F /104° F (5°C / 40°C)
Dimensions (with bracket) W×H×D 4.52×6.29×0.83 in (115×160×21.5 mm)
Power supply voltage 22-34 Vdc
Absorption in standby (mA) 45-70
Absorption during call (mA) 150-180
Absorption during communication (mA) 250-300
Network connection WLan
Video encoding PAL/NTSC
Wi-Fi technology Yes
Compatiblewith Comelit app Yes
7.2 EX-B EXTERNAL UNIT
Height 5.90 in
Width 3.15 in
Depth 1.06 in
Weight 10.58 oz
Wall-mounted Yes
Sensor type 1/4" CMOS
Lens optical dimensions 1.46 mm
Angle of view (H x V) 96° x 79°, 108° diagonal
Sensitivity 0.1 lux (color)
Video resolution (H x V) 640x480 pixels
Type of power supply Power supply from bus
Supply voltage 33 VDC
Absorption in stand-by 1.2 W
Maximum absorption 10 W
Call type Push-button
Type of button Mechanical
Number of push-buttons 1 (1 user)
Type of outputs Door release (direct current output): unlock pulse of 4A, holding current of 200mA for 12VAC / DC locks
(maximum impedance 18 Ohm)
Door release (relay contact): C-NO, 10A@12÷24 VAC/VDC"
Loudspeaker volume control Ye s
Microphone volume control Yes
IP protection rating IP54
Operating temperature -13°F ÷ 131°F (-25°C ÷ 55°C)
Operating humidity (RH max) 0 ÷ 95%
Environmental class IV (for use out of doors where the system components are fully exposed to the weather)
7.3 1209/4 BUS POWER SUPPLY
Power consumption 12W MAX
Operating Temperature Class A1 wide range indoor 23° F /104° F (-5°C +40°C)
Dimensions W×H×D 4.17x3.52x2.44 in (106x89.5x62 mm)
CSA Rating US and Canada
7.4 ACTUATOR RELAY MODULE ART. 1256
Power consumption 1.5W MAX
Operating Temperature 32° F / 86° F (0°C / 30°C)
Dimensions W×H×D 2.6×3.35×1.38 in (66×85×35 mm)
7.5 REMOTE CAMERA MODULE ART. 1409
Power consumption 3W MAX
Operating Temperature 23° F/104°F (-5°C/+40°C)
Dimensions W×H×D 2.6×3.35×1.38 in (66×85×35 mm)
7.6 VIDEO DOOR EXPANDER ART. 1405
Power consumption 0,2W MAX
Operating Temperature 23° F/104°F (-5°C/+40°C)
Dimensions W×H×D 1.42x3.54x2.28 in (36×90×58 mm)
7. Technical specification

18
8.1 WARNING
8.2 IMPORTANT SAFETY INSTRUCTIONS
8. Appendix
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THE MONITOR OR POWER ADAPTER TO WATER OR
MOISTURE.
CAUTION:
DO NOT OPEN. RISK OF ELECTRICAL SHOCK.
CAUTION!
TO REDUCE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER OR BACK, NO USER SERVICEABLE PARTS INSIDE, REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THE MONITOR OR POWER ADAPTER TO WATER OR
MOISTURE.
• Read Instructions -All the safety and operating instructions should be read before operating this equipment. These instructions should be
retained for future reference.
• Heed Warnings - All warnings on the equipment and in the operating instructions should be adhered to. All instructions regarding care and
operation of this equipment should be followed.
• Power Sources - Equipment should only be connected to the power supply specified in the operating instructions or as marked on the
equipment.
• Power Cord Protection - Keep cable cords and plugs clear off other objects, particularly at the point where they exit the equipment.
• Cleaning - Clean the equipment by wiping with a soft cloth (do not use any abrasive agents or water).
• Non-use Periods - Power cords should be unplugged from the outlet when left unused for a long period of time.
• Object and Liquid Entry - Take care not to drop objects or liquids on any part of the equipment.
• Damage Requiring Service -The unit should be serviced by a qualified service personnel when:
• The power supply cord or the plug has been damaged or
• Objects have fallen, or liquid has been spilled onto the equipment or
• The equipment has been exposed to rain or
• The equipment does not appear to operate normally or exhibits a marked change in performance or
• The equipment has been dropped and/or the enclosure has been damaged.
• Servicing - Do not attempt to service the appliance beyond that described in the operating instructions. All other servicing should be referred
to as Qualified Distributor's Service Personnel.
OTHER WARNINGS
• Monitor is designed for indoor use only. Do not install outdoors.
• Keep the equipment dry. If water should get in, wipe off immediately. Water contains minerals that can erode electronic circuits.
• Intercom system is not operational during a power failure .
• Intercom system may be affected by radio frequency interference or EMl (electrical magnetic interference) in areas where broadcasting
station antennas are close by.
• Keep all wiring at least 1 foot away from fluorescent lighting, dimmer switches and AC power.
EXPLANATION OF TWO SYMBOLS
The lighting flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute risk of electrical shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.

8.3 FCC CLASS B NOTICE
NOTE:
This equipment has been Certified and found to comply with the limits regulated by FCC. and CE. Therefore, it is designed to provide reasonable
protection against interference and will not cause interference with other appliance usage. However, it is imperative that the user follows this
manuals guidelines to avoid improper usage which may result in damage to the unit, electrical shock, and fire hazard or injury. In order to improve
the feature functions and quality of the product, the specifications are subject to change without notice from time to time.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference with
radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to connect the interference by one or more of the following measures:
• Reorient or relocate the monitor unit
• Increase the separation between the monitor and camera
• Connect the equipment on a separate outlet
• Consult the dealer or an experienced radio or television technician
8.4 GENERAL PRODUCT WARRANTY:
For all Comelit Branded Products 2 year manufacturer’s warranty from dealer date of Purchase. Proof of purchase by the dealer in the form
of an invoice is necessary for all returns.
RMA (RETURN) Policy:
1. Before Requesting an RMA Number, the installer must call into our Tech support line to verify the condition of the product and for trouble
shooting purposes in order for Comelit to determine if an RMA needs to be issued.
2. If technical support does deem that a return is needed, they will issue a trouble ticket number associated with the issue related to the
defective product. Trouble tickets are needed for all distributors to receive a RMA number.
3. All equipment must be returned as received from the manufacturer with all parts included. If all parts are not received, this may cause a delay
in the processing of the RMA and possible return of the parts to the customer.
4. Return freight is paid by the customer (non-reimbursable). Comelit will pay “Return to Customer” freight charges.
5. Product “out of warranty” is subject to repair charges to be paid by the customer.
For all Comelit products (Comelit Kits and Multi-tenant parts, excluding the HFX series and related parts)
1. New Replacements will be given on all returns of defective products. Credit is only given to distributors in special circumstances based on
Comelit approval.
2. For Distributors asking for Credit, the purchase invoice must be included in the return shipment.
3. All RMA’s must include the RMA form completely filled out.
4. Units sent in without proper paperwork will incur delays in processing and will be returned to the requester.
For RMA inquiries please contact:
Comelit USA RMA Department
Toll Free: [phone] Option 4
Main office: [phone] Option 4
[email protected]
[email protected]

1st edition - 09/2022 cod. 2G40003007
www.comelitgroup.com
Via Don Arrigoni, 5 - 24020 Rovetta (BG) - Italy
CERTIFIED MANAGEMENT SYSTEMS