Comelit Venice 6814W User manual

Passion.Technology.Design.
Venice door entry monitor - ViP system
Art. 6814W
EN
TECHNICAL
MANUAL

2
• This Comelit product was designed for use in the creation of audio and video communication systems in residential, commercial or industrial settings
and in public buildings or buildings used by the public.
• All activities connected to the installation of Comelit products must be carried out by qualified technical personnel, with careful observation of the
indications provided in the manuals / instruction sheets supplied with those products.
• Cut off the power supply before carrying out any maintenance procedures.
• Use wires with a cross-section suited to the distances involved, observing the instructions provided in the system manual.
• We advise against running the system wires through the same duct as the power cables (230V or higher).
• To ensure Comelit products are used safely: carefully observe the indications provided in the manuals / instruction sheets and make sure the system
created using Comelit products has not been tampered with / damaged.
• Comelit products do not require maintenance aside from routine cleaning, which should be carried out in accordance with the indications provided
in the manuals / instruction sheets. Any repair work must be carried out: for the products themselves, exclusively by Comelit Group S.p.A., for
systems, by qualified technical personnel.
• Comelit Group S.p.A. does not assume any responsibility for: any usage other than the intended use; non-observance of the indications and
warnings contained in this manual / instruction sheet. Comelit Group S.p.A. nonetheless reserves the right to change the information provided in this
manual / instruction sheet at any time and without prior notice.
Warning
1.
2.
7.
8.
3. 4. 5.
6.
Technical specifications
Description
GENERAL DATA
Product height (mm) 130
Product width (mm) 194
Product depth (mm) 15,9
Product color White
Material Plastic
Wall-mounted Yes
DISPLAY FEATURES
Size (inches) 7
Aspect Ratio 16:9
Touch screen Yes, capacitive
Resolution (pixels) 1024x600
OSD menu Yes
Type of display LCD
AUDIO FEATURES
Tech. implemented Full-Duplex
ELECTRICAL CHARACTERISTICS
Supply voltage 18-24VDC
PoE power supply SPoE (24VDC)
Absorption in stand-by 2,5 Watt
Maximum absorption 4,5 Watt
1. LCD Display
· Touch screen
· 7” 16:9
· Pixel 1024x600
2. Microphone
3. RJ45 SPOE (24 VDC) to connect
art. 1442B
4. Outside door call input *
5. Power input (18-24 VDC) *
as an alternative to SPOE power
supply
6. Input *
AL - Alarm input
PAN - Panic input
IN1 - General purpose input
GND – Ground for input
12V OUT – Not used
A4…A8 – Not used
7. 2 magnets for fixing the door entry
monitor to the bracket
8. Speaker
Colour door entry monitor Venice for ViP system with 7" capacitive touch screen, resolution 1024x600, fullduplex
hands-free audio and SPOE power supply. Allows adjustment of the colour level, contrast, audio and ringtone
volume. It is possible to customize the ringtone by choosing between dierent melodies. Equipped as standard
with door release functions, audio enable / disable button, self-ignition, privacy service and other programmable
functions. Manages landing calls and call repetition as standard. Compatible with H.264 video format.
1.
2.
7.
8.
3. 4. 5.
6.
*Cable supplied

3
160 cm
130 cm
BACK
1
3 4
2
HARDWARE FEATURES
Number of inputs 4
Communication ports RJ45 (Ethernet)
Ethernet ports 1
Network connection RJ45
Type of connections/
ports
1xEthernet 10/100
Mbit/s
Video encoding H.264
SETTINGS
Loudspeaker volume Yes
Microphone volume Yes
Ringtone volume Yes
Screen brightness Yes
Screen contrast Yes
Screen colour Yes
Screen backlight Yes
NETWORK AND COMMUNICATION
PROTOCOLS
Type of LAN network Ethernet 10/100
Mbit/s
IP address assignment DHCP, AUTO IP,
static IP
Operating system Linux embedded
ENVIRONMENTAL AND COMPLIANCE
FEATURES
IP protection degree IP30
Operating temperature -20° ÷ 55°
Operating humidity (RH
max - %) 10% ÷ 95%
Environmental class IV
Compliance and
Certifications
RoHS II -
2011/65/UE (EN
50581:2012), EMC
2014/30/UE (EN
61000-6-1:2007
, EN 61000-6-
3:2007+A1:2011)
HARDWARE FEATURES
Comaptibility with
Video Entry Comelit
App
Yes
Compatibility with
Comelit app (with
external gateway)
Yes
Door opener Yes
Self Activation Yes
Intercom calls Ye s
Actuator control Yes
CPS call Yes
Outside door call input Yes
Silent mode (Privacy) Yes
Hands-free function Yes
Priority calls Yes
Installation

4
Configuration
CONFIGURATION WIZARD
1. Select the desired language and confirm by pressing Yes and continue with guided configuration.
Italiano
English
Français
Español
Language
Italiano
English
Français
Español
Language
I
ta
li
a
n
o
Englis
h
Fr
a
nç
a
i
s
Esp
a
ñ
o
l
Language
Confirm language choice?
YES NO
2. Set the ViP address for the device and choose whether you want to install the door entry monitor as:
• Master unit (main door entry monitor)
• Slave unit (secondary door entry monitor)
Address
Master
Slave 1
ViP address programming
1 2 3
4 5 6
7 8 9
0
3. Press
1 2 3
4 5 6
7 8 9
0
to end the configuration process.
Address
Master
Slave 1
ViP address programming
Address
Master
Slave
1
ViP address programming
The device
will be
restarted!
Customisation and programming can be carried out via the setup menus, or using the ViP Manager
software which is available to download from the website pro.comelitgroup.com

5
ACCESSING THE ADVANCED SETTINGS MENU
1.
10:54 10/04/2021
Intercoms
A/V answering service List of calls Setup
ActuatorsCameras
2.
SETUP SELECTION
User setup menu
Installer setup menu
3.
INSTALLER PASSWORD
1 2 3
4 5 6
7 8 9
0
0000
Operating distances
Type of power supply Maximum distance (m)
1 mm²
(Ø 1,2 mm AWG 17)
UTP5 cat. 5 0,2 mm²
(Ø 0,5 mm AWG 24)
0,28 mm²
(Ø 0,6 mm AWG 23)
0,5 mm²
(Ø 0,8 mm AWG 20)
1 mm²
(Ø 1,2 mm AWG 17)
1 mm²
(Ø 1,2 mm AWG 17)
1,5 mm²
(Ø 1,4 mm AWG 15)
2,5 mm²
(Ø 1,8 mm AWG 13)
SPOE 24 VDC 100
Pair of cables 24 AWG 50

6
1
4
4
2B
+
+
-
1
0
0
-
2
4
0
V
1
0
0
-
2
4
0
V
1
4
4
2B
G
N
D
S
E
-
S
E
+
N
O
N
C
C
O
M
R
T
E
+
-
+
V
V
-
-
-
T
X
T
X
+
R
X
R
X
+
ORANGE
WHITE ORANGE
WHITE GREEN
GREEN
UT8020
UT9200
6
814W
6
814W
6
814W
-
+
1
2
0
-
2
3
0
V
1595
Use POE ports to
connect the art. 6814W
Basic wiring diagram
20 m max. Local door-opener button

7
+
+
-
ORANGE
WHITE ORANGE
WHITE GREEN
GREEN
1
4
4
2B
1
0
0
-
2
4
0
V
1
0
0
-
2
4
0
V
1
4
4
2B
6
814W
1
4
4
1
1
4
4
0
L
N
-
+
V
V
O
U
T
4
3
O
U
T
O
U
T
2
1
I
N
2
1
I
N
+
-
O
U
T
6
814W
6
814W
G
N
D
S
E
-
S
E
+
N
O
N
C
C
O
M
R
T
E
+
-
+
V
V
-
-
-
T
X
T
X
+
R
X
R
X
+
G
N
D
S
E
-
S
E
+
N
O
N
C
C
O
M
R
T
E
+
-
+
V
V
-
-
-
T
X
T
X
+
R
X
R
X
+
UT8020
UT8020
-
V
V
+
+
+
-
T
X
ORANGE
BLUE & WHITE BLUE
BROWN & WHITE BROWN
WHITE ORANGE
GREEN
WHITE GREEN
Use POE ports to connect
the art. 6814W
Connections among uplink
ports and 1440 only with
Comelit red cable 1449
Variant with second external unit
20 m max. Local door-opener button

1ª edizione 04/2021
cod. 2G40002697
www.comelitgroup.com
Via Don Arrigoni, 5 - 24020 Rovetta (BG) - Italy
CERTIFIED MANAGEMENT SYSTEMS
6
814W
6
814W
6
814W
-
V
V
+
+
+
-
T
X
ORANGE
BLUE & WHITE BLUE
BROWN & WHITE BROWN
WHITE ORANGE
GREEN
WHITE GREEN
G
N
D
S
E
-
S
E
+
N
O
N
C
C
O
M
R
T
E
+
-
+
V
V
-
-
-
T
X
T
X
+
R
X
R
X
+
P
O
E
S
T
A
N
D
A
R
D
S
W
I
T
C
H
O
D
E
T
R
N
C
S
E
-
S
E
+
N
O
C
V
-
C
N
1
1
2
V
D
C
0
,
2
5
A
1
4
4
2B
1
0
0
-
2
4
0
V
1
0
0
-
2
4
0
V
1
4
4
2B
UT8020
4899M
20 m max. Local door-opener button
Use POE ports to connect
the art. 6814W
Variant with PoE standard switch