Comeup CP-250 User manual

Winch Assembly
Electric Winch
Model: CP-250
PN:152233 220V50Hz
152758 230V50Hz
Introduction
 Feature
Lifting capacity: 250 kg at wire rope top layer
Lifting height: 29 m
Lifting speed: 10-15 m/min at 50Hz
Brake: Electromagnetic spring-applied failsafe brake
Control: Pendant switch powers the winch
 Unpacking
．Winch assembly 1pc
．Wire rope 6 mm x 30 m 1pc
．Weight hook CHW-0031 1pc
．Power lead 1.5 mm2
x 3C x 3 m and plug 1pc
．Pendant switch w/cord 1.25 mm2
x 5C x 3 m 1pc
 Read this manual carefully
You should carefully read and understand this manual before operating it.
Careless winch operation may result in personal injury hazards or property
damage.
 Information requesting or parts ordering
Please specify the followings information:
．Winch PN
．Serial number
．Part description
．Replacement part number
．Quantity for each part

Installation
Before using the winch, make sure all electrical components have no
corrosion or damaged; the environment should be clear and dry.
 Performance
Winch Model CP-250
Motor kw x p 0.75 x 4
Recommend
Wire Rope
Size(mm) 6
Breaking (kg) 2,010
1st
Layer
Rated Load
(kg) 50Hz 370
2nd
Layer
Rated Load
(kg) 50Hz 330
3rd
Layer
Rated Load
(kg) 50Hz
298
Speed
(m/min) 50Hz 10 Speed (m/min) 50Hz 11.3
Speed
(m/min)
50Hz 12.5
Rope-Winding Cumulating
Sum (m)
5.4 Rope-Winding
Cumulating Sum (m)
11.5
Rope-Winding
Cumulating Sum (m)
18.3
4th
Layer
Rated Load
(kg) 50Hz 272
5th
Layer
Rated Load
(kg) 50Hz 250
Speed
(m/min) 50Hz 13.8 Speed (m/min) 50Hz 15
Rope-Winding Cumulating
Sum (m) 25.7 Rope-Winding Cumulating Sum (m) 30
 Wiring Diagram
Warning
．The winch is not intended to be used in any manner for the movement or
lifting of personnel.
．The lifting capacity shown is based on the top layer of rope on the drum.
．The rope winding on the drum shall remain 5 wraps from the drum.
Parts List
Item No. Description Part No. Qty
1 Induction motor kit , 110/220V 880405 1
Induction motor kit , 230V 882541
2 Control kit, 3 round pins 880398 1
3 Bridge rectifier 880368 1
4 Support bracket 880369 2
5 Drum kit 880370 1
6-1 Tie bar 881862 1
6-2 Tie bar kit 880371 3
7 2nd shaft kit 880372 1
8 Gear box kit 880373 1
9 1st stage carrier 880374 1
10 1st shaft kit 880375 1
11 Conductor kit 880376 1
12 Brake coil 110V 880377 1
13 Conductor plate A 880403 2
14 Brake disc 880379 2
15 Hex socket 880380 1
16 Conductor plate B kit 880381 1
17 Brake cover 880382 1
18 Wire rope 880383 1
19 Weight hook CHW-0031 880384 1