Comica Vimo Q User manual

User Manual
Four-channel Mini Wireless Microphone
Vimo Q
Stereo
A
VOL 4
B
VOL 4
C
VOL 4
D
VOL 4

Foreword
Thank you for purchasing Comica Vimo Q Wireless Microphone
Main Features
· Four-channel Wireless Microphone, Mini and Portable
· 48kHz/24bit Record, CD-level Sound Quality
· Brand-new CalMix Audio Processing, One-key Denoise
· Support 4 Audio Tracks Mixing and Individual Output
· Digital/Analog Outputs, Universal for Camera/Smartphone/PC
· Support Real-time Monitoring, Mute, Volume Control, M/S Switch
· HD Screen Display, Support Screen Flip
· Internal and External MIC Two Input Modes
· USB-C Charging Port, Support Charging While Using
· Charging&Storing Case, Duration Up to 16H
· Low Latency<20ms, Working Range Up to 200M
Notice
It is better to keep face to face when using it and not turn your back to
the receiver. Otherwise, it is easy to generate breakpoints, which is a
normal phenomenon
Please notice that the STEREO function can not be realized when
recording in single-channel
Quad mode is not supported when outputting audio through USB
interface
There will be a "ticking" sound when switching on/off the quad mode.
It is recommended to select the corresponding mode before recording
The product is a high-precision equipment, please prevent it from
falling, collision, or pounding
Do not use this device near sources of heat or interference, such as
radiators, ovens, refrigerators, air conditioners, etc
If the sound pickup distance is close or record outdoors, please put
the wind muff on the transmitter to prevent sound bursting or reduce
wind noise
Please keep the product in a dry environment; do not use the
equipment in rainy or damp environments to avoid short-circuit danger
1

Packing List
① ③②
User Manual
Vimo Q
④⑤ ⑥ ⑦ ⑧ ⑨
1. Transmitter*4
2. Receiver
3. Charging Case
4. 2-in-1 Charging/Audio Output Cable
5. 3.5mm TRS-TRS Audio Cable
6 3.5mm TRS-TRRS Audio Cable
7. Wind Muff*4
8. User Manual
9. Warranty Card
Stereo
AVOL4 BVOL4
CVOL4 DVOL4
2

Components and Instruction
Transmitter（TX）
3.5mm TRS External
Mic Interface Internal Mic
Power/ Mute Button
Denoise/Volume
Up Button
Pair/Volume
Down Button
Working Indicator
Light
USB-C Charging Port
Belt Clip
Charging Pad
3

1. 3.5mm TRS External Mic Interface
2. Internal Mic
3. Power/ Mute Button
Long press for On/Off; short press for muting switch
4. Denoise/Volume Up Button
Long press to turn on/off denoise; shot press to increase the volume
5. Pair/Volume Down Button
Long press to enter pairing state; short press to decrease the volume
6. Working Indicator Light
Red light on when muting; green light on when denoising, blue light on
in original sound
7. USB-C Charging Port
To connect a power bank/DC power supply through the 2-in-1
charging/audio output cable for charging
8. Belt Clip
9. Charging Pad
4

Receiver（RX）
3.5mm TRS Audio
Output Interface
Reset Hole
Power/Mode
Switch Button
Charging Pad
Pair/Screen Flip
Button
Belt Clip
USB-C Charging/
Audio Output Interface
Stereo
A
VOL 4
B
VOL 4
C
VOL 4
D
VOL 4
3.5mm TRS/TRRS Monitoring/
Audio Output Interface
5

1. 3.5mm TRS Audio Output Interface
In mono mode, output a mixing audio of A/B/C/D four channels;
In stereo mode, output two individual audios. A/C channel is the left
channel, B/D channel is the right channel;
In quad mode, output two individual audios of A/B channels
2. 3.5mm TRS/TRRS Monitoring/Audio Output Interface
In mono/stereo mode, plug in 3.5mm TRS/TRRS headphones to monitor;
In quad mode, output two individual audios of C/D channels
3. Reset Hole
If there are abnormal phenomena such as crashes or failure to turn on,
insert a pin into the reset hole to reset and restart automatically
4. USB-C Charging/Audio Output Interface
To connect the power bank/DC power supply for charging or connect
mobile phone/computer for digital audio output through the 2-in-1
charging/audio output cable
5. Power/Mode Switch Button
Long press for On/Off; short press to switch mono/stereo modes
6. Pair/Screen Flip Button
Long Press to enter pairing state; short press to flip the screen
7. Charging Pad
8. Belt Clip
6

Screen Display：
Stereo
AVOL 4 BVOL 4
CVOL 4 DVOL 4
Mono Mode
Stereo Mode
Quad Mode
Pair...
VOL
MUTE
Receiver' Battery Power
Transmitter' Battery Power
B Channel
D Channel
Audio Dynamic Bar
A Channel
C Channel
7

Power Indicator Light
Pair/Awake Button
Reset Hole
USB-C Charging Port
1. Power Indicator Light
There are four lights, each representing 25% of the power
2. Pair/Awake Button
Long press to pair the microphone; short press to awake the microphone
3. Reset Hole
If the device cannot be charged, insert a pin into the reset hole to reset it
4. USB-C Charging Port
To connect a power bank/DC power supply through the 2-in-1
charging/audio output cable for charging
Charging Case：
8

Installation and Usage
Pairing Method(All have been paired by default. If you need to re-pair,
please follow the instructions)
Place the transmitters and receiver within one meter and long press their
power buttons to switch on, then long press their pair buttons to enter the
pairing state. During the pairing state, the indicator lights of transmitters
alternately flash red, blue, and green, and the receiver screen shows" Pair....".
After successful pairing, the indicator lights of the transmitters turn blue, and
the receiver screen displays the status of the connected channels.
If any transmitter is not paired, please turn off all transmitters and receiver,
and then follow the above steps to pair again.
Stereo
AVOL 4 BVOL 4
CVOL 4 DVOL 4
9

Installation
To choose internal mic or external mic according to personal needs
Transmitter（TX）:
Internal Mic External Mic
1. When using the internal mic, it is recommended to fix the belt
clip outwards for better concealment
2. When using an external mic, the internal mic will automatically
turn off
10

Stereo
A
VOL 4
B
VOL 4
C
VOL 4
D
VOL 4
1. 3.5mm Analog Output
When used with a camera, connect it through the 3.5mm TRS-TRS audio
cable; When used with a mobile phone or computer, connect it through the
3.5mm TRS-TRRS audio cable and related OTG audio cable/adapter; to
monitor according to personal needs (please purchase the relevant audio
cable/adapter by yourself)
Mono/Stereo Mode
Receiver（RX）：
In stereo mode, A/C channel is the left channel, B/D channel is
the right channel
11

Connect the receiver and mobile phone/computer through the 2-in-1
charging/ audio output cable and related OTG audio cables/adapters; to
monitor according to personal needs (please purchase the relevant audio
cable/adapter by yourself)
2. USB Digital Output
Adapter
Stereo
A
VOL 4
B
VOL 4
C
VOL 4
D
VOL 4
12

Connect the receiver and recorder/mixer through a 3.5mm TRS-TRS/
3.5mm TRS-XLR dual heads audio cable to output four individual analog
audios of A/B/C/D channels(Please purchase relevant audio cables by
yourself)
Quad Mode
Quad mode is not supported when outputting audio through
USB interface
Stereo
A
VOL 4
B
VOL 4
C
VOL 4
D
VOL 4
13
Stereo
A
VOL 4
B
VOL 4
C
VOL 4
D
VOL 4

Specification
Antenna
Transmitting Power
Receiving Sensitivity
Microphone Sensitivity
Polar Pattern
Frequency Response
S/N
Equivalent Noise
Maximum SPL
Dynamic Range
Sound Delay
USB Specification
Battery
Charging Time
Battery Life
Net Weight
Dimension
Working Temperature
Storage Temperature
Ceramic Antenna
10dBm
-97dBm
-32dB±2dB
Omnidirectional
80Hz ~ 20kHz
70dB SPL(A-weighted,as per IEC651)
24dB SPL(A-weighted,as per IEC651)
110dB SPL(@ 1% THD)
86dB SPL(A-weighted,as per IEC651)
<20ms
48kHz/24bit
TX: Li-polymer 140mAh 3.7V
RX: Li-polymer 600mAh 3.7V
Charging Case: Li-polymer 2900mAh 3.7V
TX: 51 x 24 x21mm
RX: 54 x 48 x 22mm
Charging Case: 186 x 93 x 63mm
TX: 3 Hours RX: 3 Hours
Charging Case:3 Hours
TX: 8 Hours RX: 8 Hours
Charging Case:1 Time
TX: 16g RX: 37g
Charging Case: 330g
0℃~ 50℃
-20℃~ 60℃
14