Comica CVM-VP3 User manual

CVM-VP3
Super-Cardioid Condenser Shotgun Microphone for Camera / Camcorder
USER MANUAL

Foreword
Main Features
Thanks for purchasing COMICA CVM-VP3 condenser shotgun microphone.
Comica CVM-VP3 Super-cardioid condenser shotgun video microphone, is
specially designed for video shooting, meeting, and interview for camera,
camcorder ; Meanwhile the Microphone is designed with low Noise Circuit, two
step high-pass filter, -10dB sensitivity adjustment, powered by AA battery, low
self-noise , full metal material construction and super shielding, which provides
your video a broadcast sound quality.
Please read this manual carefully before using. This product has been precisely
calibrated at the factory, do not assemble and disassemble parts by yourself.
. Low Noise Circuit
. Two Step High-pass Filter
. -10dB Adjustable Sensitivity
. 1.5V AA Battery
. Full Metal Material Construction and Super Shielding
. Broadcast Sound Quality
Low-noise Low Cut Filter -10dB Adjustable
Sensitivity
Cardioid Pattern Full Metal and
Super Shielding
1

Notice
When putting the batteries in, please notice the “positive and negative poles” to
avoid reversed assembling to cause product damage.
Please do not put the device beside the heat or interference source.
Please avoid falling, collision or pounding during usage.
Don’t expose the device in rain or moist environment .
After usage, please turn it off for storage.
Package Content
Microphone Interference Tube
XLR-3.5mm Output Cable
XLR-XLR Output Cable
Camera Bracket
Boom Bracket
Windscreen
Black Portable Bag
User Manual
Warranty Card
1
2
3
4
5
6
7
8
9
1
2 3
45 6
7 8 9
10 11
Standard Parts
Wind Muff
Shock Mount
10
11
Optional parts
CVM-VP3
Super-CardioidCondenser Shotgun Microphone for Camera / Camcorder
USER MANUAL
2

Components Introduction
Microphone
Audio Receiver End
Power/-10dB Sensitivity Button
Treble Boost Button
Low-cut Filter Button
Power Indicator Light
Audio Output Jack
Battery Holder
1
2
3
4
5
6
7
1
23
45
7
6
3

Installation and Operation
1. Installation
1.1 Installation of AA Battery
1.11 Rotate the tube , open the battery holder
1.12 Insert the battery
1.13 Rotate the tube, close the battery holder
4

1.2 Install Mic onto Camera/Camcorder
Connect the Mic and Camera/Camcorder Via Camera Bracket
1.21 Connect the mic onto Camera Bracket
1.22 Connect the mic onto camera/camcorder via Camera Baseplate , fasten the
Tightness Adjusting Screw
5

1.23 Connect the 3.5mm output cable / XLR output cable to the Camera/ Camcorder
6

Connect the Mic and Camcorder Via Boom
1.31 Connect the Mic and Boom Bracket
1.32Connect the Boom Bracket and Boom
7

1.33 Connect the 3.5mm / XLR output cable to the Camcorder
8