Commax dpv-4be User manual

•Thank you for purchasing COMMAX products.
•Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow
instructions to use a product exactly.
•The company is not responsible for any safety accidents caused by abnormal operation of the product.
•Thank you for purchasing COMMAXproducts.
•Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow
instructions to use a product exactly.
•The company is not responsible for anysafety accidents caused byabnormaloperation of the product.
User Manual
VIDEO DOOR PHONE DPV-4BE

1
Table of Contents
Warnings and caution
1. Parts Names & Functions
2. Operation
3. Installation Method
4. Wiring
5. Parts list
6. Specifications
1
Table of Contents
2
4
5
6
7
8
9

2
Warnings and caution
Please follow the things described below in order to prevent any dan-
ger or property damage.
Warning
Caution
Prohibition.
No disassembly
No touch
Must follow strictly.
Shows plugging out the power cord
without an exception
Shows the warning and caution for an electric shock.
Shows the warning and caution for a fire.
It may cause a serious damage or
injury if violated.
It may cause a minor damage or
injury if violated.
Power & Installation
Warning
Please don’t use several
products at the same time on
one power socket.
·It may cause a fire due to an
abnormal overheating.
Please don’tbend the power
cable excessively or it may
cause an electric shock.
·fire when using a damaged
power cable.
Please don’t handle the power
cable with a wet hand.
·It may cause an electric
shock.
Please plug out the power
cable from the socket when
not using it for a long period
of time.
·It may shorten the product
lifespan or cause a fire.
Please don’tinstall the prod-
uct in the place where there is
much oil, smoke or humidity.
·It may cause an electric
shock or fire.
Please don’tinstall the prod-
uct with the lightening and
thunder.
·It may cause an electric
shock or fire.
Please don’tuse and connect
this product with other prod-
ucts with different rated volt-
age
·It may cause a disorder or
fire.
When installing the product
that generates heat, please
install the product away from
the wall (10cm) for the venti-
lation.
·It may cause a fire due to
the increased internal tem-
perature.

3
Warnings and caution
Cleaning & Use
Please don’tdisassemble,
repair or rebuild this product
arbitrarily (please contact the
service center if a repair is
needed.
·It may cause an electric
shock or fire.
Please plug the power cable
firmly into the inner end
·It may cause a fire.
Please hold the plug tightly
when unplugging the power
cable (a part of the copper
wire may be disconnected if
the grabbing is only made on
the cord when pulling out the
cable).
·It may cause an electric
shock or fire
When connecting the power
cables after cutting the cable,
please install the product with
power off
·It may cause an electric
shock or fire
When installing the product,
please fix it firmly while using
the wall-mounting unit and
screws.
·It may cause an injury from
the falling object.
Please be careful when using
an AC circuit breaker since
there is a possibility of an
electric shock.
When cleaning the product,
please rub it with a soft and
dry cloth after plugging out
the power cable. (Please don’t
use any chemical products
such as wax, benzene, alcohol
or cleanser.)
Please don’t drop the product
on the ground and don’tapply
a shock .
·It may cause a failure.
Please use the designated con-
nection cable within the maxi-
mum calling distance desig-
nated for the product
·It may reduce the product
performance.
Please check the use voltage
and current for the DC-only
products and use the appropri-
ate rectifier.
·It may cause a fire.
Please avoid direct rays of the
sun or heating devices at a
time of installation.
·It may cause a fire.
Please don’tinstall the prod-
uct on an unstable place or
small support board.
·It may cause an injury if it
falls down while in use.
If an abnormal sound, burning
smell or smoke is coming out
of the product, please plug out
the power cable and contact a
service center.
·It may cause an electric
shock or fire.
Please don’t insert any metal-
lic or burnable materials into
the ventilation hole.
·It may cause an electric
shock or fire.
Please use only the designated
batteries for the products of
using DC power.
·It may cause an electric
shock or fire.
Cleaning & UsePower & Installation
Warning
Caution

4
1.Parts Names & Functions
1Handset
2 Hook Switch
3Monitor Screen
4Connection Terminal Connect the Camera and the Interphone
5 LED Power Status and the camera indication.
6Monitor Button Press the button when the householder wants to see the front
door situation
7Interphone Button Call the Interphone after picking up a handset.
8Door Release Button When this button is pressed, while communication
between a monitor and a camera unit, the door is opened.
9Volume control switch. Control the volume
10 Power On/Off Switch On/off power.
11 Brightness Control Switch Control the Brightness.
12 AC Powercode
13 Handset Connector Socket Connect Handset after installation
No. Name Description

1. Calling from a Camera unit.( In case of install a camera)
5
2. Operation
※A view of the front door can be seen anytime the
entrance button is pressed and a dialog can be made
with anyone at the front door.
the visitor’s image appears on the monitor
hang-up the handset
dialog begins
󱎘 󱎘
to check
open the door
dialog duration is
up to 90 seconds at
a time
the door release function oper-
ates only when the visitor’s
image is displayed on the screen
a chime
sounds a chime
sounds
The visitor
presses the
call button on
the camera1
The visitor
presses the
call button on
the camera2
▶
▶▶
ends the call
▶
▶ ▶
▶
▶
▶ ▶
press the butten
camera 1 view
The lamp is blink-
ing on green
color.
camera 2 view
The lamp is blink-
ing on orange
color.
Press twice
Press once

6
3. Installation Method.
Monitor
2. Communication with the optional Interphone
a three-way conversation can take
place if the monitor or interphone is
picked up simultaneously
▶
hang-up the
handset
▶
end the dialog
a ‘beep’ will be
heard
▶▶
A visitor
calls from
the entrance
a chime rings simulta-
neously from both the
monitor and inter-
phone
▶ ▶
open the door
Call from
the monitor
▶
Call to the
monitor
▶▶
dialog begins
dialog begins
dialog begins

7
* Note:
- Do not install near magnetic activity, humid temperatures, extreme heating conditions,
under direct sunlight as these may damage the condition and performance of the prod
ucts.
- The position of the unit’s body should fit the standard height from the range which is
recommended to be from 1450㎜~ 1500㎜.
* Wires descriptions of camera.
1. Red: Voice 2. Blue: GND 3. Yellow: Power(+12V) 4. White: Video
4. Wiring
* Note:
- Do not install the camera where it is exposed to direct sunlight.
- Keep cleaning up its lens to capture good views.
Installation method of a camera unit.
- DPV-4BE
DPV-4BE

8
5. Parts list
* Wiring precautions
1. If high voltage cables are present in the vicinity, use a coaxial cable with metal outer
casing.
2. If any internal wires is exposed through mis-wiring, it may cause a short and become
a cause of malfunction or fire.
3. When connecting the monitor and camera, make sure that the monitor power is off.
(turn on the power after plugging the AC power cord into the outlet)
Monitor(main unit) Mounting bracket User’s guide
Handset Mounting
screw
4 pin
connector
screw
(for monitor)

6. Specifications
Rating Voltage AC 100 - 240V, 50/ 60Hz
Consumption operation : 14W
Wiring method To a Camera unit : 4 wires polarity, To an Interphone : 4 wires polarity
Monitor 10.16Cm CRT
Communication method Full duplex (Handset)
Call tone Call sound from camera: electronic chime, Interphone : electronic buzzer
Monitor Display 90 ±20sec
Distance from Camera 28m(Ø 0.5)/ 50m(Ø 0.65)/ 70m(Ø 0.8)
Working Temperature 0 ~ +40℃(32°F ~ 104°F)
Weight 1.2Kg
Dimension(mm) 189(W) ×208(H) ×69.0(D)
Model DPV-4BE
9